summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm64/Kconfig72
1 files changed, 36 insertions, 36 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 40fb05d96c60..8d33d7fed6d8 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -553,6 +553,9 @@ config ARM64_ERRATUM_1530923
If unsure, say Y.
+config ARM64_WORKAROUND_REPEAT_TLBI
+ bool
+
config ARM64_ERRATUM_1286807
bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
default y
@@ -694,6 +697,35 @@ config CAVIUM_TX2_ERRATUM_219
If unsure, say Y.
+config FUJITSU_ERRATUM_010001
+ bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
+ default y
+ help
+ This option adds a workaround for Fujitsu-A64FX erratum E#010001.
+ On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
+ accesses may cause undefined fault (Data abort, DFSC=0b111111).
+ This fault occurs under a specific hardware condition when a
+ load/store instruction performs an address translation using:
+ case-1 TTBR0_EL1 with TCR_EL1.NFD0 == 1.
+ case-2 TTBR0_EL2 with TCR_EL2.NFD0 == 1.
+ case-3 TTBR1_EL1 with TCR_EL1.NFD1 == 1.
+ case-4 TTBR1_EL2 with TCR_EL2.NFD1 == 1.
+
+ The workaround is to ensure these bits are clear in TCR_ELx.
+ The workaround only affects the Fujitsu-A64FX.
+
+ If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+ bool "Hip07 161600802: Erroneous redistributor VLPI base"
+ default y
+ help
+ The HiSilicon Hip07 SoC uses the wrong redistributor base
+ when issued ITS commands such as VMOVP and VMAPP, and requires
+ a 128kB offset to be applied to the target address in this commands.
+
+ If unsure, say Y.
+
config QCOM_FALKOR_ERRATUM_1003
bool "Falkor E1003: Incorrect translation due to ASID change"
default y
@@ -705,9 +737,6 @@ config QCOM_FALKOR_ERRATUM_1003
is unchanged. Work around the erratum by invalidating the walk cache
entries for the trampoline before entering the kernel proper.
-config ARM64_WORKAROUND_REPEAT_TLBI
- bool
-
config QCOM_FALKOR_ERRATUM_1009
bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
default y
@@ -729,25 +758,6 @@ config QCOM_QDF2400_ERRATUM_0065
If unsure, say Y.
-config SOCIONEXT_SYNQUACER_PREITS
- bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
- default y
- help
- Socionext Synquacer SoCs implement a separate h/w block to generate
- MSI doorbell writes with non-zero values for the device ID.
-
- If unsure, say Y.
-
-config HISILICON_ERRATUM_161600802
- bool "Hip07 161600802: Erroneous redistributor VLPI base"
- default y
- help
- The HiSilicon Hip07 SoC uses the wrong redistributor base
- when issued ITS commands such as VMOVP and VMAPP, and requires
- a 128kB offset to be applied to the target address in this commands.
-
- If unsure, say Y.
-
config QCOM_FALKOR_ERRATUM_E1041
bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
default y
@@ -758,22 +768,12 @@ config QCOM_FALKOR_ERRATUM_E1041
If unsure, say Y.
-config FUJITSU_ERRATUM_010001
- bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
+config SOCIONEXT_SYNQUACER_PREITS
+ bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
default y
help
- This option adds a workaround for Fujitsu-A64FX erratum E#010001.
- On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
- accesses may cause undefined fault (Data abort, DFSC=0b111111).
- This fault occurs under a specific hardware condition when a
- load/store instruction performs an address translation using:
- case-1 TTBR0_EL1 with TCR_EL1.NFD0 == 1.
- case-2 TTBR0_EL2 with TCR_EL2.NFD0 == 1.
- case-3 TTBR1_EL1 with TCR_EL1.NFD1 == 1.
- case-4 TTBR1_EL2 with TCR_EL2.NFD1 == 1.
-
- The workaround is to ensure these bits are clear in TCR_ELx.
- The workaround only affects the Fujitsu-A64FX.
+ Socionext Synquacer SoCs implement a separate h/w block to generate
+ MSI doorbell writes with non-zero values for the device ID.
If unsure, say Y.