summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt1
-rw-r--r--Documentation/devicetree/bindings/display/bridge/anx6345.yaml102
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi1
-rw-r--r--arch/arm/boot/dts/sun8i-h3.dtsi13
-rw-r--r--arch/arm/boot/dts/sunxi-h3-h5.dtsi9
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts45
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts8
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi33
8 files changed, 206 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
index 1464a4713553..2005bb486705 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
@@ -8,6 +8,7 @@ bus.
Required properties:
- compatible: Must be one of:
- allwinner,sun5i-a13-mbus
+ - allwinner,sun8i-h3-mbus
- reg: Offset and length of the register set for the controller
- clocks: phandle to the clock driving the controller
- dma-ranges: See section 2.3.9 of the DeviceTree Specification
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
new file mode 100644
index 000000000000..6d72b3d11fbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+
+maintainers:
+ - Torsten Duwe <duwe@lst.de>
+
+description: |
+ The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+ portable devices.
+
+properties:
+ compatible:
+ const: analogix,anx6345
+
+ reg:
+ maxItems: 1
+ description: base I2C address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset
+
+ dvdd12-supply:
+ maxItems: 1
+ description: Regulator for 1.2V digital core power.
+
+ dvdd25-supply:
+ maxItems: 1
+ description: Regulator for 2.5V digital core power.
+
+ ports:
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: |
+ Video port for LVTTL input
+
+ port@1:
+ type: object
+ description: |
+ Video port for eDP output (panel or connector).
+ May be omitted if EDID works reliably.
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - dvdd12-supply
+ - dvdd25-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>;
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_fldo1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ anx6345_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+
+ anx6345_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ anx6345_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };
+ };
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index bbeb743633c6..6a5033785a8b 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -469,7 +469,6 @@
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
resets = <&ccu RST_AHB1_HDMI>;
- reset-names = "ahb";
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
dmas = <&dma 13>, <&dma 13>, <&dma 14>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 78356db14fbb..fe773c72a69b 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -120,6 +120,19 @@
};
soc {
+ deinterlace: deinterlace@1400000 {
+ compatible = "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01400000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
syscon: system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
reg = <0x01c00000 0x1000>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 8df29cd05b83..510f83fb234b 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -109,6 +109,7 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ dma-ranges;
ranges;
display_clocks: clock@1000000 {
@@ -543,6 +544,14 @@
};
};
+ mbus: dram-controller@1c62000 {
+ compatible = "allwinner,sun8i-h3-mbus";
+ reg = <0x01c62000 0x1000>;
+ clocks = <&ccu 113>;
+ dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+ #interconnect-cells = <1>;
+ };
+
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 1069e7012c9c..970415106dcf 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -100,18 +100,41 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
-/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline)
- * driver for this chip at the moment, the bootloader initializes it.
- * However it can be accessed with the i2c-dev driver from user space.
- */
&i2c0 {
clock-frequency = <100000>;
status = "okay";
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_dldo3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ anx6345_in: endpoint {
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+ };
+ };
+};
+
+&mixer0 {
+ status = "okay";
};
&mmc0 {
@@ -319,6 +342,20 @@
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_anx6345: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&anx6345_in>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index b99e9db35d50..4ed3fc2c7734 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -95,6 +95,10 @@
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -310,3 +314,7 @@
usb3_vbus-supply = <&reg_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 4abfed2e9ff6..d96747fcb94b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -570,6 +570,38 @@
status = "disabled";
};
+ dwc3: dwc3@5200000 {
+ compatible = "snps,dwc3";
+ reg = <0x05200000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_XHCI>,
+ <&ccu CLK_BUS_XHCI>,
+ <&rtc 0>;
+ clock-names = "ref", "bus_early", "suspend";
+ resets = <&ccu RST_BUS_XHCI>;
+ /*
+ * The datasheet of the chip doesn't declare the
+ * peripheral function, and there's no boards known
+ * to have a USB Type-B port routed to the port.
+ * In addition, no one has tested the peripheral
+ * function yet.
+ * So set the dr_mode to "host" in the DTSI file.
+ */
+ dr_mode = "host";
+ phys = <&usb3phy>;
+ phy-names = "usb3-phy";
+ status = "disabled";
+ };
+
+ usb3phy: phy@5210000 {
+ compatible = "allwinner,sun50i-h6-usb3-phy";
+ reg = <0x5210000 0x10000>;
+ clocks = <&ccu CLK_USB_PHY1>;
+ resets = <&ccu RST_USB_PHY1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
ehci3: usb@5311000 {
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
reg = <0x05311000 0x100>;
@@ -649,7 +681,6 @@
"tcon-tv0";
clock-output-names = "tcon-top-tv0";
resets = <&ccu RST_BUS_TCON_TOP>;
- reset-names = "rst";
#clock-cells = <1>;
ports {
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 09:05:31 +0000