diff options
| -rw-r--r-- | drivers/usb/core/driver.c | 3 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 1 | ||||
| -rw-r--r-- | drivers/usb/core/sysfs.c | 6 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 161 | ||||
| -rw-r--r-- | include/linux/usb.h | 4 |
6 files changed, 29 insertions, 156 deletions
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f7841d44feda..689433cdef25 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1790,6 +1790,9 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) struct usb_hcd *hcd = bus_to_hcd(udev->bus); int ret = -EPERM; + if (enable && !udev->usb2_hw_lpm_allowed) + return 0; + if (hcd->driver->set_usb2_hw_lpm) { ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable); if (!ret) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d3a1d79d663d..9be1a2d5fba6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5203,6 +5203,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) done: /* Now that the alt settings are re-installed, enable LTM and LPM. */ + usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); usb_release_bos_descriptor(udev); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5cf431b0424c..52a97adf02a0 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -458,7 +458,7 @@ static ssize_t usb2_hardware_lpm_show(struct device *dev, struct usb_device *udev = to_usb_device(dev); const char *p; - if (udev->usb2_hw_lpm_enabled == 1) + if (udev->usb2_hw_lpm_allowed == 1) p = "enabled"; else p = "disabled"; @@ -478,8 +478,10 @@ static ssize_t usb2_hardware_lpm_store(struct device *dev, ret = strtobool(buf, &value); - if (!ret) + if (!ret) { + udev->usb2_hw_lpm_allowed = value; ret = usb_set_usb2_hardware_lpm(udev, value); + } usb_unlock_device(udev); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 83bcd13622c3..49b8bd063fab 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1693,9 +1693,7 @@ void xhci_free_command(struct xhci_hcd *xhci, void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - struct dev_info *dev_info, *next; struct xhci_cd *cur_cd, *next_cd; - unsigned long flags; int size; int i, j, num_ports; @@ -1756,13 +1754,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) scratchpad_free(xhci); - spin_lock_irqsave(&xhci->lock, flags); - list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) { - list_del(&dev_info->list); - kfree(dev_info); - } - spin_unlock_irqrestore(&xhci->lock, flags); - if (!xhci->rh_bw) goto no_bw; @@ -2231,7 +2222,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); INIT_LIST_HEAD(&xhci->cancel_cmd_list); page_size = xhci_readl(xhci, &xhci->op_regs->page_size); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2983e5dd98bf..0ea253ec813d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4013,133 +4013,6 @@ static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev) return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm); } -static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, - struct usb_device *udev) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct dev_info *dev_info; - __le32 __iomem **port_array; - __le32 __iomem *addr, *pm_addr; - u32 temp, dev_id; - unsigned int port_num; - unsigned long flags; - int hird; - int ret; - - if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || - !udev->lpm_capable) - return -EINVAL; - - /* we only support lpm for non-hub device connected to root hub yet */ - if (!udev->parent || udev->parent->parent || - udev->descriptor.bDeviceClass == USB_CLASS_HUB) - return -EINVAL; - - spin_lock_irqsave(&xhci->lock, flags); - - /* Look for devices in lpm_failed_devs list */ - dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 | - le16_to_cpu(udev->descriptor.idProduct); - list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) { - if (dev_info->dev_id == dev_id) { - ret = -EINVAL; - goto finish; - } - } - - port_array = xhci->usb2_ports; - port_num = udev->portnum - 1; - - if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) { - xhci_dbg(xhci, "invalid port number %d\n", udev->portnum); - ret = -EINVAL; - goto finish; - } - - /* - * Test USB 2.0 software LPM. - * FIXME: some xHCI 1.0 hosts may implement a new register to set up - * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1 - * in the June 2011 errata release. - */ - xhci_dbg(xhci, "test port %d software LPM\n", port_num); - /* - * Set L1 Device Slot and HIRD/BESL. - * Check device's USB 2.0 extension descriptor to determine whether - * HIRD or BESL shoule be used. See USB2.0 LPM errata. - */ - pm_addr = port_array[port_num] + PORTPMSC; - hird = xhci_calculate_hird_besl(xhci, udev); - temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird); - xhci_writel(xhci, temp, pm_addr); - - /* Set port link state to U2(L1) */ - addr = port_array[port_num]; - xhci_set_link_state(xhci, port_array, port_num, XDEV_U2); - - /* wait for ACK */ - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(10); - spin_lock_irqsave(&xhci->lock, flags); - - /* Check L1 Status */ - ret = xhci_handshake(xhci, pm_addr, - PORT_L1S_MASK, PORT_L1S_SUCCESS, 125); - if (ret != -ETIMEDOUT) { - /* enter L1 successfully */ - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n", - port_num, temp); - ret = 0; - } else { - temp = xhci_readl(xhci, pm_addr); - xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n", - port_num, temp & PORT_L1S_MASK); - ret = -EINVAL; - } - - /* Resume the port */ - xhci_set_link_state(xhci, port_array, port_num, XDEV_U0); - - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(10); - spin_lock_irqsave(&xhci->lock, flags); - - /* Clear PLC */ - xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC); - - /* Check PORTSC to make sure the device is in the right state */ - if (!ret) { - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "resumed port %d status 0x%x\n", port_num, temp); - if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) || - (temp & PORT_PLS_MASK) != XDEV_U0) { - xhci_dbg(xhci, "port L1 resume fail\n"); - ret = -EINVAL; - } - } - - if (ret) { - /* Insert dev to lpm_failed_devs list */ - xhci_warn(xhci, "device LPM test failed, may disconnect and " - "re-enumerate\n"); - dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC); - if (!dev_info) { - ret = -ENOMEM; - goto finish; - } - dev_info->dev_id = dev_id; - INIT_LIST_HEAD(&dev_info->list); - list_add(&dev_info->list, &xhci->lpm_failed_devs); - } else { - xhci_ring_device(xhci, udev->slot_id); - } - -finish: - spin_unlock_irqrestore(&xhci->lock, flags); - return ret; -} - int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, struct usb_device *udev, int enable) { @@ -4267,24 +4140,26 @@ static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port, int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ret; int portnum = udev->portnum - 1; - ret = xhci_usb2_software_lpm_test(hcd, udev); - if (!ret) { - xhci_dbg(xhci, "software LPM test succeed\n"); - if (xhci->hw_lpm_support == 1 && - xhci_check_usb2_port_capability(xhci, portnum, XHCI_HLC)) { - udev->usb2_hw_lpm_capable = 1; - udev->l1_params.timeout = XHCI_L1_TIMEOUT; - udev->l1_params.besl = XHCI_DEFAULT_BESL; - if (xhci_check_usb2_port_capability(xhci, portnum, - XHCI_BLC)) - udev->usb2_hw_lpm_besl_capable = 1; - ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1); - if (!ret) - udev->usb2_hw_lpm_enabled = 1; - } + if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || + !udev->lpm_capable) + return 0; + + /* we only support lpm for non-hub device connected to root hub yet */ + if (!udev->parent || udev->parent->parent || + udev->descriptor.bDeviceClass == USB_CLASS_HUB) + return 0; + + if (xhci->hw_lpm_support == 1 && + xhci_check_usb2_port_capability( + xhci, portnum, XHCI_HLC)) { + udev->usb2_hw_lpm_capable = 1; + udev->l1_params.timeout = XHCI_L1_TIMEOUT; + udev->l1_params.besl = XHCI_DEFAULT_BESL; + if (xhci_check_usb2_port_capability(xhci, portnum, + XHCI_BLC)) + udev->usb2_hw_lpm_besl_capable = 1; } return 0; diff --git a/include/linux/usb.h b/include/linux/usb.h index 055ba74bee80..7454865ad148 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -475,7 +475,8 @@ struct usb3_lpm_parameters { * @lpm_capable: device supports LPM * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM - * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled + * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled + * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) @@ -548,6 +549,7 @@ struct usb_device { unsigned usb2_hw_lpm_capable:1; unsigned usb2_hw_lpm_besl_capable:1; unsigned usb2_hw_lpm_enabled:1; + unsigned usb2_hw_lpm_allowed:1; unsigned usb3_lpm_enabled:1; int string_langid; |