diff options
| -rw-r--r-- | arch/arm/configs/imx_v4_v5_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/configs/multi_v4t_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-imx/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-scb9328.c | 143 |
5 files changed, 0 insertions, 153 deletions
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 2b2d589017b9..e70032cc4669 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -22,7 +22,6 @@ CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXC=y -CONFIG_MACH_SCB9328=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index d744692f308d..141492a7ebc0 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -20,7 +20,6 @@ CONFIG_INTEGRATOR_CM720T=y CONFIG_INTEGRATOR_CM920T=y CONFIG_INTEGRATOR_CM922T_XA10=y CONFIG_ARCH_MXC=y -CONFIG_MACH_SCB9328=y CONFIG_MACH_IMX1_DT=y CONFIG_ARCH_NSPIRE=y CONFIG_AEABI=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 52dd9440f04f..7aa8f814d226 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -102,13 +102,6 @@ if ARCH_MULTI_V4T comment "MX1 platforms:" -config MACH_SCB9328 - bool "Synertronixx scb9328" - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Y here if you are using a Synertronixx scb9328 board - config MACH_IMX1_DT bool "Support i.MX1 platforms from device tree" select SOC_IMX1 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 3bbd06d76cba..5e33873d0160 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -36,7 +36,6 @@ obj-y += ssi-fiq-ksym.o endif # i.MX1 based machines -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c deleted file mode 100644 index 1f6bc3f7ae14..000000000000 --- a/arch/arm/mach-imx/mach-scb9328.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * linux/arch/arm/mach-mx1/mach-scb9328.c - * - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/interrupt.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -/* - * This scb9328 has a 32MiB flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data scb_flash_data = { - .width = 2, -}; - -static struct platform_device scb_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &scb_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * scb9328 has a DM9000 network controller - * connected to CS5, with 16 bit data path - * and interrupt connected to GPIO 3 - */ - -/* - * internal datapath is fixed 16 bit - */ -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -/* - * the DM9000 drivers wants two defined address spaces - * to gain access to address latch registers and the data path. - */ -static struct resource dm9000x_resources[] = { - { - .name = "address area", - .start = MX1_CS5_PHYS, - .end = MX1_CS5_PHYS + 1, - .flags = IORESOURCE_MEM, /* address access */ - }, { - .name = "data area", - .start = MX1_CS5_PHYS + 4, - .end = MX1_CS5_PHYS + 5, - .flags = IORESOURCE_MEM, /* data access */ - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000x_resources), - .resource = dm9000x_resources, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -static const int mxc_uart1_pins[] = { - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &scb_flash_device, - &dm9000x_device, -}; - -/* - * scb9328_init - Init the CPU card itself - */ -static void __init scb9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); - - imx1_add_imx_uart0(&uart_pdata); - - printk(KERN_INFO"Scb9328: Adding devices\n"); - dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3)); - dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init scb9328_timer_init(void) -{ - mx1_clocks_init(32000); -} - -MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .atag_offset = 100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = scb9328_timer_init, - .init_machine = scb9328_init, - .restart = mxc_restart, -MACHINE_END |