diff options
| -rw-r--r-- | Documentation/devicetree/bindings/pci/mvebu-pci.txt | 3 | ||||
| -rw-r--r-- | drivers/pci/host/pci-mvebu.c | 103 |
2 files changed, 63 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 08c716b2c6b6..2de6f65ecfb1 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -78,7 +78,8 @@ and the following optional properties: multiple lanes. If this property is not found, we assume that the value is 0. - reset-gpios: optional gpio to PERST# -- reset-delay-us: delay in us to wait after reset de-assertion +- reset-delay-us: delay in us to wait after reset de-assertion, if not + specified will default to 100ms, as required by the PCIe specification. Example: diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 45a89d969700..cd7d51988738 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -133,6 +133,12 @@ struct mvebu_pcie { int nports; }; +struct mvebu_pcie_window { + phys_addr_t base; + phys_addr_t remap; + size_t size; +}; + /* Structure representing one PCIe interface */ struct mvebu_pcie_port { char *name; @@ -150,10 +156,8 @@ struct mvebu_pcie_port { struct mvebu_sw_pci_bridge bridge; struct device_node *dn; struct mvebu_pcie *pcie; - phys_addr_t memwin_base; - size_t memwin_size; - phys_addr_t iowin_base; - size_t iowin_size; + struct mvebu_pcie_window memwin; + struct mvebu_pcie_window iowin; u32 saved_pcie_stat; }; @@ -379,23 +383,45 @@ static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port, } } +static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + const struct mvebu_pcie_window *desired, + struct mvebu_pcie_window *cur) +{ + if (desired->base == cur->base && desired->remap == cur->remap && + desired->size == cur->size) + return; + + if (cur->size != 0) { + mvebu_pcie_del_windows(port, cur->base, cur->size); + cur->size = 0; + cur->base = 0; + + /* + * If something tries to change the window while it is enabled + * the change will not be done atomically. That would be + * difficult to do in the general case. + */ + } + + if (desired->size == 0) + return; + + mvebu_pcie_add_windows(port, target, attribute, desired->base, + desired->size, desired->remap); + *cur = *desired; +} + static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { - phys_addr_t iobase; + struct mvebu_pcie_window desired = {}; /* Are the new iobase/iolimit values invalid? */ if (port->bridge.iolimit < port->bridge.iobase || port->bridge.iolimitupper < port->bridge.iobaseupper || !(port->bridge.command & PCI_COMMAND_IO)) { - - /* If a window was configured, remove it */ - if (port->iowin_base) { - mvebu_pcie_del_windows(port, port->iowin_base, - port->iowin_size); - port->iowin_base = 0; - port->iowin_size = 0; - } - + mvebu_pcie_set_window(port, port->io_target, port->io_attr, + &desired, &port->iowin); return; } @@ -412,32 +438,27 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) * specifications. iobase is the bus address, port->iowin_base * is the CPU address. */ - iobase = ((port->bridge.iobase & 0xF0) << 8) | - (port->bridge.iobaseupper << 16); - port->iowin_base = port->pcie->io.start + iobase; - port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | - (port->bridge.iolimitupper << 16)) - - iobase) + 1; - - mvebu_pcie_add_windows(port, port->io_target, port->io_attr, - port->iowin_base, port->iowin_size, - iobase); + desired.remap = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + desired.base = port->pcie->io.start + desired.remap; + desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + desired.remap) + + 1; + + mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, + &port->iowin); } static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { + struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; + /* Are the new membase/memlimit values invalid? */ if (port->bridge.memlimit < port->bridge.membase || !(port->bridge.command & PCI_COMMAND_MEMORY)) { - - /* If a window was configured, remove it */ - if (port->memwin_base) { - mvebu_pcie_del_windows(port, port->memwin_base, - port->memwin_size); - port->memwin_base = 0; - port->memwin_size = 0; - } - + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, + &desired, &port->memwin); return; } @@ -447,14 +468,12 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) * window to setup, according to the PCI-to-PCI bridge * specifications. */ - port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); - port->memwin_size = - (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base + 1; - - mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr, - port->memwin_base, port->memwin_size, - MVEBU_MBUS_NO_REMAP); + desired.base = ((port->bridge.membase & 0xFFF0) << 16); + desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + desired.base + 1; + + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, + &port->memwin); } /* @@ -1162,7 +1181,7 @@ static int mvebu_pcie_powerup(struct mvebu_pcie_port *port) return ret; if (port->reset_gpio) { - u32 reset_udelay = 20000; + u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); |