diff options
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_crt.c | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_ddi.c | 151 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_ddi.h | 8 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_fdi.c | 139 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_fdi.h | 3 |
5 files changed, 156 insertions, 146 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c index 4934edd51cb0..077ebc7e6396 100644 --- a/drivers/gpu/drm/i915/display/intel_crt.c +++ b/drivers/gpu/drm/i915/display/intel_crt.c @@ -38,6 +38,7 @@ #include "intel_crt.h" #include "intel_ddi.h" #include "intel_display_types.h" +#include "intel_fdi.h" #include "intel_fifo_underrun.h" #include "intel_gmbus.h" #include "intel_hotplug.h" diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index e2b82e0557e7..28877a31adc0 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -36,10 +36,11 @@ #include "intel_ddi_buf_trans.h" #include "intel_display_types.h" #include "intel_dp.h" -#include "intel_dp_mst.h" #include "intel_dp_link_training.h" +#include "intel_dp_mst.h" #include "intel_dpio_phy.h" #include "intel_dsi.h" +#include "intel_fdi.h" #include "intel_fifo_underrun.h" #include "intel_gmbus.h" #include "intel_hdcp.h" @@ -91,8 +92,8 @@ static int intel_ddi_hdmi_level(struct intel_encoder *encoder, * values in advance. This function programs the correct values for * DP/eDP/FDI use cases. */ -static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder, - const struct intel_crtc_state *crtc_state) +void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 iboost_bit = 0; @@ -154,8 +155,8 @@ static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder, ddi_translations[level].trans2); } -static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, - enum port port) +void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, + enum port port) { if (IS_BROXTON(dev_priv)) { udelay(16); @@ -183,7 +184,7 @@ static void intel_wait_ddi_buf_active(struct drm_i915_private *dev_priv, port_name(port)); } -static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll) +u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll) { switch (pll->info->id) { case DPLL_ID_WRPLL1: @@ -243,144 +244,6 @@ static u32 icl_pll_to_ddi_clk_sel(struct intel_encoder *encoder, } } -/* Starting with Haswell, different DDI ports can work in FDI mode for - * connection to the PCH-located connectors. For this, it is necessary to train - * both the DDI port and PCH receiver for the desired DDI buffer settings. - * - * The recommended port to work in FDI mode is DDI E, which we use here. Also, - * please note that when FDI mode is active on DDI E, it shares 2 lines with - * DDI A (which is used for eDP) - */ - -void hsw_fdi_link_train(struct intel_encoder *encoder, - const struct intel_crtc_state *crtc_state) -{ - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - u32 temp, i, rx_ctl_val, ddi_pll_sel; - int n_entries; - - intel_ddi_get_buf_trans_fdi(dev_priv, &n_entries); - - intel_prepare_dp_ddi_buffers(encoder, crtc_state); - - /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the - * mode set "sequence for CRT port" document: - * - TP1 to TP2 time with the default value - * - FDI delay to 90h - * - * WaFDIAutoLinkSetTimingOverrride:hsw - */ - intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), - FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); - - /* Enable the PCH Receiver FDI PLL */ - rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | - FDI_RX_PLL_ENABLE | - FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes); - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); - intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A)); - udelay(220); - - /* Switch from Rawclk to PCDclk */ - rx_ctl_val |= FDI_PCDCLK; - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); - - /* Configure Port Clock Select */ - ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll); - intel_de_write(dev_priv, PORT_CLK_SEL(PORT_E), ddi_pll_sel); - drm_WARN_ON(&dev_priv->drm, ddi_pll_sel != PORT_CLK_SEL_SPLL); - - /* Start the training iterating through available voltages and emphasis, - * testing each value twice. */ - for (i = 0; i < n_entries * 2; i++) { - /* Configure DP_TP_CTL with auto-training */ - intel_de_write(dev_priv, DP_TP_CTL(PORT_E), - DP_TP_CTL_FDI_AUTOTRAIN | - DP_TP_CTL_ENHANCED_FRAME_ENABLE | - DP_TP_CTL_LINK_TRAIN_PAT1 | - DP_TP_CTL_ENABLE); - - /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. - * DDI E does not support port reversal, the functionality is - * achieved on the PCH side in FDI_RX_CTL, so no need to set the - * port reversal bit */ - intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), - DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes - 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2)); - intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E)); - - udelay(600); - - /* Program PCH FDI Receiver TU */ - intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); - - /* Enable PCH FDI Receiver with auto-training */ - rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); - intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A)); - - /* Wait for FDI receiver lane calibration */ - udelay(30); - - /* Unset FDI_RX_MISC pwrdn lanes */ - temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A)); - temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); - intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp); - intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A)); - - /* Wait for FDI auto training time */ - udelay(5); - - temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E)); - if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { - drm_dbg_kms(&dev_priv->drm, - "FDI link training done on step %d\n", i); - break; - } - - /* - * Leave things enabled even if we failed to train FDI. - * Results in less fireworks from the state checker. - */ - if (i == n_entries * 2 - 1) { - drm_err(&dev_priv->drm, "FDI link training failed!\n"); - break; - } - - rx_ctl_val &= ~FDI_RX_ENABLE; - intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); - intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A)); - - temp = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_E)); - temp &= ~DDI_BUF_CTL_ENABLE; - intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), temp); - intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E)); - - /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ - temp = intel_de_read(dev_priv, DP_TP_CTL(PORT_E)); - temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); - temp |= DP_TP_CTL_LINK_TRAIN_PAT1; - intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp); - intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E)); - - intel_wait_ddi_buf_idle(dev_priv, PORT_E); - - /* Reset FDI_RX_MISC pwrdn lanes */ - temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A)); - temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); - temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); - intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp); - intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A)); - } - - /* Enable normal pixel sending for FDI */ - intel_de_write(dev_priv, DP_TP_CTL(PORT_E), - DP_TP_CTL_FDI_AUTOTRAIN | - DP_TP_CTL_LINK_TRAIN_NORMAL | - DP_TP_CTL_ENHANCED_FRAME_ENABLE | - DP_TP_CTL_ENABLE); -} - static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { diff --git a/drivers/gpu/drm/i915/display/intel_ddi.h b/drivers/gpu/drm/i915/display/intel_ddi.h index a4dd815c0000..f9a916cad7e7 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.h +++ b/drivers/gpu/drm/i915/display/intel_ddi.h @@ -17,6 +17,7 @@ struct intel_crtc_state; struct intel_dp; struct intel_dpll_hw_state; struct intel_encoder; +struct intel_shared_dpll; enum transcoder; i915_reg_t dp_tp_ctl_reg(struct intel_encoder *encoder, @@ -27,8 +28,11 @@ void intel_ddi_fdi_post_disable(struct intel_atomic_state *state, struct intel_encoder *intel_encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state); -void hsw_fdi_link_train(struct intel_encoder *encoder, - const struct intel_crtc_state *crtc_state); +u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll); +void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state); +void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, + enum port port); void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port); bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe); void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder, diff --git a/drivers/gpu/drm/i915/display/intel_fdi.c b/drivers/gpu/drm/i915/display/intel_fdi.c index b2eb96ae10a2..77df675e607e 100644 --- a/drivers/gpu/drm/i915/display/intel_fdi.c +++ b/drivers/gpu/drm/i915/display/intel_fdi.c @@ -3,6 +3,8 @@ * Copyright © 2020 Intel Corporation */ #include "intel_atomic.h" +#include "intel_ddi.h" +#include "intel_ddi_buf_trans.h" #include "intel_display_types.h" #include "intel_fdi.h" @@ -550,6 +552,143 @@ train_done: drm_dbg_kms(&dev_priv->drm, "FDI train done.\n"); } +/* Starting with Haswell, different DDI ports can work in FDI mode for + * connection to the PCH-located connectors. For this, it is necessary to train + * both the DDI port and PCH receiver for the desired DDI buffer settings. + * + * The recommended port to work in FDI mode is DDI E, which we use here. Also, + * please note that when FDI mode is active on DDI E, it shares 2 lines with + * DDI A (which is used for eDP) + */ +void hsw_fdi_link_train(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + u32 temp, i, rx_ctl_val, ddi_pll_sel; + int n_entries; + + intel_ddi_get_buf_trans_fdi(dev_priv, &n_entries); + + intel_prepare_dp_ddi_buffers(encoder, crtc_state); + + /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the + * mode set "sequence for CRT port" document: + * - TP1 to TP2 time with the default value + * - FDI delay to 90h + * + * WaFDIAutoLinkSetTimingOverrride:hsw + */ + intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), + FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); + + /* Enable the PCH Receiver FDI PLL */ + rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | + FDI_RX_PLL_ENABLE | + FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes); + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); + intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A)); + udelay(220); + + /* Switch from Rawclk to PCDclk */ + rx_ctl_val |= FDI_PCDCLK; + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); + + /* Configure Port Clock Select */ + ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll); + intel_de_write(dev_priv, PORT_CLK_SEL(PORT_E), ddi_pll_sel); + drm_WARN_ON(&dev_priv->drm, ddi_pll_sel != PORT_CLK_SEL_SPLL); + + /* Start the training iterating through available voltages and emphasis, + * testing each value twice. */ + for (i = 0; i < n_entries * 2; i++) { + /* Configure DP_TP_CTL with auto-training */ + intel_de_write(dev_priv, DP_TP_CTL(PORT_E), + DP_TP_CTL_FDI_AUTOTRAIN | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_LINK_TRAIN_PAT1 | + DP_TP_CTL_ENABLE); + + /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. + * DDI E does not support port reversal, the functionality is + * achieved on the PCH side in FDI_RX_CTL, so no need to set the + * port reversal bit */ + intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), + DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes - 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2)); + intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E)); + + udelay(600); + + /* Program PCH FDI Receiver TU */ + intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); + + /* Enable PCH FDI Receiver with auto-training */ + rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); + intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A)); + + /* Wait for FDI receiver lane calibration */ + udelay(30); + + /* Unset FDI_RX_MISC pwrdn lanes */ + temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A)); + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); + intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp); + intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A)); + + /* Wait for FDI auto training time */ + udelay(5); + + temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E)); + if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { + drm_dbg_kms(&dev_priv->drm, + "FDI link training done on step %d\n", i); + break; + } + + /* + * Leave things enabled even if we failed to train FDI. + * Results in less fireworks from the state checker. + */ + if (i == n_entries * 2 - 1) { + drm_err(&dev_priv->drm, "FDI link training failed!\n"); + break; + } + + rx_ctl_val &= ~FDI_RX_ENABLE; + intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val); + intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A)); + + temp = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_E)); + temp &= ~DDI_BUF_CTL_ENABLE; + intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E), temp); + intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E)); + + /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ + temp = intel_de_read(dev_priv, DP_TP_CTL(PORT_E)); + temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); + temp |= DP_TP_CTL_LINK_TRAIN_PAT1; + intel_de_write(dev_priv, DP_TP_CTL(PORT_E), temp); + intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E)); + + intel_wait_ddi_buf_idle(dev_priv, PORT_E); + + /* Reset FDI_RX_MISC pwrdn lanes */ + temp = intel_de_read(dev_priv, FDI_RX_MISC(PIPE_A)); + temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); + temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); + intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A), temp); + intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A)); + } + + /* Enable normal pixel sending for FDI */ + intel_de_write(dev_priv, DP_TP_CTL(PORT_E), + DP_TP_CTL_FDI_AUTOTRAIN | + DP_TP_CTL_LINK_TRAIN_NORMAL | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_ENABLE); +} + void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc); diff --git a/drivers/gpu/drm/i915/display/intel_fdi.h b/drivers/gpu/drm/i915/display/intel_fdi.h index a9cd21663eb8..af01d2c173a8 100644 --- a/drivers/gpu/drm/i915/display/intel_fdi.h +++ b/drivers/gpu/drm/i915/display/intel_fdi.h @@ -9,6 +9,7 @@ struct drm_i915_private; struct intel_crtc; struct intel_crtc_state; +struct intel_encoder; #define I915_DISPLAY_CONFIG_RETRY 1 int ilk_fdi_compute_config(struct intel_crtc *intel_crtc, @@ -18,5 +19,7 @@ void ilk_fdi_disable(struct intel_crtc *crtc); void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc); void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state); void intel_fdi_init_hook(struct drm_i915_private *dev_priv); +void hsw_fdi_link_train(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state); #endif |