diff options
| -rw-r--r-- | arch/mips/dec/ioasic-irq.c | 8 | ||||
| -rw-r--r-- | arch/mips/dec/time.c | 22 | ||||
| -rw-r--r-- | arch/mips/include/asm/dec/ioasic.h | 4 | ||||
| -rw-r--r-- | arch/mips/kernel/csrc-ioasic.c | 8 | ||||
| -rw-r--r-- | arch/mips/kernel/smp-cmp.c | 13 | ||||
| -rw-r--r-- | arch/mips/kernel/vpe.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/amd/declance.c | 1 |
7 files changed, 50 insertions, 8 deletions
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c index 824e08c73798..4b3e3a4375a6 100644 --- a/arch/mips/dec/ioasic-irq.c +++ b/arch/mips/dec/ioasic-irq.c @@ -51,6 +51,14 @@ static struct irq_chip ioasic_irq_type = { .irq_unmask = unmask_ioasic_irq, }; +void clear_ioasic_dma_irq(unsigned int irq) +{ + u32 sir; + + sir = ~(1 << (irq - ioasic_irq_base)); + ioasic_write(IO_REG_SIR, sir); +} + static struct irq_chip ioasic_dma_irq_type = { .name = "IO-ASIC-DMA", .irq_ack = ack_ioasic_irq, diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 56ebc7f2bede..1914e56f0d96 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -125,12 +125,16 @@ int rtc_mips_set_mmss(unsigned long nowtime) void __init plat_time_init(void) { + int ioasic_clock = 0; u32 start, end; int i = HZ / 8; /* Set up the rate of periodic DS1287 interrupts. */ ds1287_set_base_clock(HZ); + /* On some I/O ASIC systems we have the I/O ASIC's counter. */ + if (IOASIC) + ioasic_clock = dec_ioasic_clocksource_init() == 0; if (cpu_has_counter) { ds1287_timer_state(); while (!ds1287_timer_state()) @@ -147,9 +151,21 @@ void __init plat_time_init(void) mips_hpt_frequency = (end - start) * 8; printk(KERN_INFO "MIPS counter frequency %dHz\n", mips_hpt_frequency); - } else if (IOASIC) - /* For pre-R4k systems we use the I/O ASIC's counter. */ - dec_ioasic_clocksource_init(); + + /* + * All R4k DECstations suffer from the CP0 Count erratum, + * so we can't use the timer as a clock source, and a clock + * event both at a time. An accurate wall clock is more + * important than a high-precision interval timer so only + * use the timer as a clock source, and not a clock event + * if there's no I/O ASIC counter available to serve as a + * clock source. + */ + if (!ioasic_clock) { + init_r4k_clocksource(); + mips_hpt_frequency = 0; + } + } ds1287_clockevent_init(dec_interrupt[DEC_IRQ_RTC]); } diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h index 98badd6bf22d..a6e505a0e44b 100644 --- a/arch/mips/include/asm/dec/ioasic.h +++ b/arch/mips/include/asm/dec/ioasic.h @@ -31,8 +31,10 @@ static inline u32 ioasic_read(unsigned int reg) return ioasic_base[reg / 4]; } +extern void clear_ioasic_dma_irq(unsigned int irq); + extern void init_ioasic_irqs(int base); -extern void dec_ioasic_clocksource_init(void); +extern int dec_ioasic_clocksource_init(void); #endif /* __ASM_DEC_IOASIC_H */ diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index 87e88feb4a25..6cbbf6e106b9 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -37,7 +37,7 @@ static struct clocksource clocksource_dec = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -void __init dec_ioasic_clocksource_init(void) +int __init dec_ioasic_clocksource_init(void) { unsigned int freq; u32 start, end; @@ -56,8 +56,14 @@ void __init dec_ioasic_clocksource_init(void) end = dec_ioasic_hpt_read(&clocksource_dec); freq = (end - start) * 8; + + /* An early revision of the I/O ASIC didn't have the counter. */ + if (!freq) + return -ENXIO; + printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); clocksource_dec.rating = 200 + freq / 10000000; clocksource_register_hz(&clocksource_dec, freq); + return 0; } diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index c2e5d74739b4..5969f1e9b62a 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -99,7 +99,9 @@ static void cmp_init_secondary(void) c->core = (read_c0_ebase() >> 1) & 0x1ff; #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) - c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; + if (cpu_has_mipsmt) + c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & + TCBIND_CURVPE; #endif #ifdef CONFIG_MIPS_MT_SMTC c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT; @@ -177,9 +179,16 @@ void __init cmp_smp_setup(void) } if (cpu_has_mipsmt) { - unsigned int nvpe, mvpconf0 = read_c0_mvpconf0(); + unsigned int nvpe = 1; +#ifdef CONFIG_MIPS_MT_SMP + unsigned int mvpconf0 = read_c0_mvpconf0(); + + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; +#elif defined(CONFIG_MIPS_MT_SMTC) + unsigned int mvpconf0 = read_c0_mvpconf0(); nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; +#endif smp_num_siblings = nvpe; } pr_info("Detected %i available secondary CPU(s)\n", ncpu); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index faf84c5f2629..59b2b3cd7885 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1368,7 +1368,7 @@ out_einval: } static DEVICE_ATTR_RW(ntcs); -static struct attribute vpe_attrs[] = { +static struct attribute *vpe_attrs[] = { &dev_attr_kill.attr, &dev_attr_ntcs.attr, NULL, diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c index 3d86ffeb4e15..94edc9c6fbbf 100644 --- a/drivers/net/ethernet/amd/declance.c +++ b/drivers/net/ethernet/amd/declance.c @@ -725,6 +725,7 @@ static irqreturn_t lance_dma_merr_int(int irq, void *dev_id) { struct net_device *dev = dev_id; + clear_ioasic_dma_irq(irq); printk(KERN_ERR "%s: DMA error\n", dev->name); return IRQ_HANDLED; } |