diff options
| -rw-r--r-- | Documentation/input/alps.txt | 75 | ||||
| -rw-r--r-- | drivers/input/mouse/alps.c | 37 |
2 files changed, 76 insertions, 36 deletions
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt new file mode 100644 index 000000000000..ab5478f92a2b --- /dev/null +++ b/Documentation/input/alps.txt @@ -0,0 +1,75 @@ +ALPS Touchpad Protocol +---------------------- + +Introduction +------------ + +Currently the ALPS touchpad driver supports two protocol versions in use by +ALPS touchpads, the "old" and "new" protocol versions. Fundamentally these +differ only in the format of their event packets (in reality many features may +be found on new protocol devices that aren't found on the old protocol +devices, but these are handled transparently as feature differences rather +than protocol differences). + +Detection +--------- + +All ALPS touchpads should respond to the "E6 report" command sequence: +E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or +00-00-64. + +If the E6 report is successful, the touchpad model is identified using the "E7 +report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is +matched against known models in the alps_model_data_array. + +Packet Format +------------- + +In the following tables, the following notation us used. + + CAPITALS = stick, miniscules = touchpad + +?'s can have different meanings on different models, such as wheel rotation, +extra buttons, stick buttons on a dualpoint, etc. + +PS/2 packet format +------------------ + + byte 0: 0 0 YSGN XSGN 1 M R L + byte 1: X7 X6 X5 X4 X3 X2 X1 X0 + byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + +Note that the device never signals overflow condition. + +ALPS Absolute Mode - Old Format +------------------------------- + + byte 0: 1 0 0 0 1 x9 x8 x7 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 ? ? l r ? fin ges + byte 3: 0 ? ? ? ? y9 y8 y7 + byte 4: 0 y6 y5 y4 y3 y2 y1 y0 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +ALPS Absolute Mode - New Format +------------------------------- + + byte 0: 1 ? ? ? 1 ? ? ? + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 x10 x9 x8 x7 ? fin ges + byte 3: 0 y9 y8 y7 1 M R L + byte 4: 0 y6 y5 y4 y3 y2 y1 y0 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +Dualpoint device -- interleaved packet format +--------------------------------------------- + + byte 0: 1 1 0 0 1 1 1 1 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 x10 x9 x8 x7 0 fin ges + byte 3: 0 0 YSGN XSGN 1 1 1 1 + byte 4: X7 X6 X5 X4 X3 X2 X1 X0 + byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + byte 6: 0 y9 y8 y7 1 m r l + byte 7: 0 y6 y5 y4 y3 y2 y1 y0 + byte 8: 0 z6 z5 z4 z3 z2 z1 z0 diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 003587c71f43..19d09431addd 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -67,42 +67,7 @@ static const struct alps_model_info alps_model_data[] = { * isn't valid per PS/2 spec. */ -/* - * PS/2 packet format - * - * byte 0: 0 0 YSGN XSGN 1 M R L - * byte 1: X7 X6 X5 X4 X3 X2 X1 X0 - * byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * - * Note that the device never signals overflow condition. - * - * ALPS absolute Mode - new format - * - * byte 0: 1 ? ? ? 1 ? ? ? - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2: 0 x10 x9 x8 x7 ? fin ges - * byte 3: 0 y9 y8 y7 1 M R L - * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 - * - * Dualpoint device -- interleaved packet format - * - * byte 0: 1 1 0 0 1 1 1 1 - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2: 0 x10 x9 x8 x7 0 fin ges - * byte 3: 0 0 YSGN XSGN 1 1 1 1 - * byte 4: X7 X6 X5 X4 X3 X2 X1 X0 - * byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * byte 6: 0 y9 y8 y7 1 m r l - * byte 7: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 8: 0 z6 z5 z4 z3 z2 z1 z0 - * - * CAPITALS = stick, miniscules = touchpad - * - * ?'s can have different meanings on different models, - * such as wheel rotation, extra buttons, stick buttons - * on a dualpoint, etc. - */ +/* Packet formats are described in Documentation/input/alps.txt */ static bool alps_is_valid_first_byte(const struct alps_model_info *model, unsigned char data) |