summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/lm633
-rw-r--r--drivers/hwmon/lm63.c148
2 files changed, 136 insertions, 15 deletions
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index df3e1ae42f39..4d30d209881a 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -66,7 +66,8 @@ supported either.
The lm63 driver will not update its values more frequently than configured with
the update_interval sysfs attribute; reading them more often will do no harm,
-but will return 'old' values.
+but will return 'old' values. Values in the automatic fan control lookup table
+(attributes pwm1_auto_*) have their own independent lifetime of 5 seconds.
The LM64 is effectively an LM63 with GPIO lines. The driver does not
support these GPIO lines at present.
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index a5e4ba82af17..1c06a333ba20 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -75,6 +75,9 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
#define LM63_REG_PWM_VALUE 0x4C
#define LM63_REG_PWM_FREQ 0x4D
+#define LM63_REG_LUT_TEMP_HYST 0x4F
+#define LM63_REG_LUT_TEMP(nr) (0x50 + 2 * (nr))
+#define LM63_REG_LUT_PWM(nr) (0x51 + 2 * (nr))
#define LM63_REG_LOCAL_TEMP 0x00
#define LM63_REG_LOCAL_HIGH 0x05
@@ -192,7 +195,9 @@ struct lm63_data {
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
+ char lut_valid; /* zero until lut fields are valid */
unsigned long last_updated; /* in jiffies */
+ unsigned long lut_last_updated; /* in jiffies */
enum chips kind;
int temp2_offset;
@@ -204,18 +209,22 @@ struct lm63_data {
u16 fan[2]; /* 0: input
1: low limit */
u8 pwm1_freq;
- u8 pwm1_value;
- s8 temp8[3]; /* 0: local input
+ u8 pwm1[9]; /* 0: current output
+ 1-8: lookup table */
+ s8 temp8[11]; /* 0: local input
1: local high limit
- 2: remote critical limit */
+ 2: remote critical limit
+ 3-10: lookup table */
s16 temp11[4]; /* 0: remote input
1: remote low limit
2: remote high limit
3: remote offset */
u16 temp11u; /* remote input (unsigned) */
u8 temp2_crit_hyst;
+ u8 lut_temp_hyst;
u8 alarms;
bool pwm_highres;
+ bool lut_temp_highres;
bool remote_unsigned; /* true if unsigned remote upper limits */
bool trutherm;
};
@@ -227,6 +236,11 @@ static inline int temp8_from_reg(struct lm63_data *data, int nr)
return TEMP8_FROM_REG(data->temp8[nr]);
}
+static inline int lut_temp_from_reg(struct lm63_data *data, int nr)
+{
+ return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000);
+}
+
/*
* Sysfs callback functions and files
*/
@@ -261,17 +275,19 @@ static ssize_t set_fan(struct device *dev, struct device_attribute *dummy,
return count;
}
-static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy,
+static ssize_t show_pwm1(struct device *dev, struct device_attribute *devattr,
char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm63_data *data = lm63_update_device(dev);
+ int nr = attr->index;
int pwm;
if (data->pwm_highres)
- pwm = data->pwm1_value;
+ pwm = data->pwm1[nr];
else
- pwm = data->pwm1_value >= 2 * data->pwm1_freq ?
- 255 : (data->pwm1_value * 255 + data->pwm1_freq) /
+ pwm = data->pwm1[nr] >= 2 * data->pwm1_freq ?
+ 255 : (data->pwm1[nr] * 255 + data->pwm1_freq) /
(2 * data->pwm1_freq);
return sprintf(buf, "%d\n", pwm);
@@ -294,9 +310,9 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
val = SENSORS_LIMIT(val, 0, 255);
mutex_lock(&data->update_lock);
- data->pwm1_value = data->pwm_highres ? val :
- (val * data->pwm1_freq * 2 + 127) / 255;
- i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
+ data->pwm1[0] = data->pwm_highres ? val :
+ (val * data->pwm1_freq * 2 + 127) / 255;
+ i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1[0]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -333,6 +349,16 @@ static ssize_t show_remote_temp8(struct device *dev,
+ data->temp2_offset);
}
+static ssize_t show_lut_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct lm63_data *data = lm63_update_device(dev);
+ return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index)
+ + data->temp2_offset);
+}
+
static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
@@ -440,6 +466,17 @@ static ssize_t show_temp2_crit_hyst(struct device *dev,
- TEMP8_FROM_REG(data->temp2_crit_hyst));
}
+static ssize_t show_lut_temp_hyst(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct lm63_data *data = lm63_update_device(dev);
+
+ return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index)
+ + data->temp2_offset
+ - TEMP8_FROM_REG(data->lut_temp_hyst));
+}
+
/*
* And now the other way around, user-space provides an absolute
* hysteresis value and we have to store a relative one
@@ -574,8 +611,48 @@ static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
set_fan, 1);
-static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 0);
static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, show_pwm1, NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IRUGO,
+ show_lut_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IRUGO, show_pwm1, NULL, 2);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO,
+ show_lut_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, show_pwm1, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp, S_IRUGO,
+ show_lut_temp, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IRUGO, show_pwm1, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp, S_IRUGO,
+ show_lut_temp, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IRUGO, show_pwm1, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp, S_IRUGO,
+ show_lut_temp, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_pwm, S_IRUGO, show_pwm1, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp, S_IRUGO,
+ show_lut_temp, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_pwm, S_IRUGO, show_pwm1, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp, S_IRUGO,
+ show_lut_temp, NULL, 9);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 9);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_pwm, S_IRUGO, show_pwm1, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp, S_IRUGO,
+ show_lut_temp, NULL, 10);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp_hyst, S_IRUGO,
+ show_lut_temp_hyst, NULL, 10);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8,
@@ -609,8 +686,33 @@ static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
set_update_interval);
static struct attribute *lm63_attributes[] = {
- &dev_attr_pwm1.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
&dev_attr_pwm1_enable.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point5_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point6_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point7_temp_hyst.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point8_temp_hyst.dev_attr.attr,
+
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
@@ -834,6 +936,8 @@ static void lm63_init_client(struct i2c_client *client)
u8 config_enhanced
= i2c_smbus_read_byte_data(client,
LM96163_REG_CONFIG_ENHANCED);
+ if (config_enhanced & 0x20)
+ data->lut_temp_highres = true;
if ((config_enhanced & 0x10)
&& !(data->config_fan & 0x08) && data->pwm1_freq == 8)
data->pwm_highres = true;
@@ -872,6 +976,7 @@ static struct lm63_data *lm63_update_device(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct lm63_data *data = i2c_get_clientdata(client);
unsigned long next_update;
+ int i;
mutex_lock(&data->update_lock);
@@ -895,8 +1000,8 @@ static struct lm63_data *lm63_update_device(struct device *dev)
LM63_REG_PWM_FREQ);
if (data->pwm1_freq == 0)
data->pwm1_freq = 1;
- data->pwm1_value = i2c_smbus_read_byte_data(client,
- LM63_REG_PWM_VALUE);
+ data->pwm1[0] = i2c_smbus_read_byte_data(client,
+ LM63_REG_PWM_VALUE);
data->temp8[0] = i2c_smbus_read_byte_data(client,
LM63_REG_LOCAL_TEMP);
@@ -939,6 +1044,21 @@ static struct lm63_data *lm63_update_device(struct device *dev)
data->valid = 1;
}
+ if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
+ !data->lut_valid) {
+ for (i = 0; i < 8; i++) {
+ data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
+ LM63_REG_LUT_PWM(i));
+ data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
+ LM63_REG_LUT_TEMP(i));
+ }
+ data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
+ LM63_REG_LUT_TEMP_HYST);
+
+ data->lut_last_updated = jiffies;
+ data->lut_valid = 1;
+ }
+
mutex_unlock(&data->update_lock);
return data;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 17:01:10 +0000