diff options
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/hw.h | 54 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.c | 83 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 220 |
5 files changed, 366 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 5e8d8af5d0d0..020ac9f10168 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1116,6 +1116,13 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar) WMI_STAT_PEER; break; case ATH10K_FW_WMI_OP_VERSION_10_4: + ar->max_num_peers = TARGET_10_4_NUM_PEERS; + ar->max_num_stations = TARGET_10_4_NUM_STATIONS; + ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; + ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; + ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; + ar->fw_stats_req_mask = WMI_STAT_PEER; + break; case ATH10K_FW_WMI_OP_VERSION_UNSET: case ATH10K_FW_WMI_OP_VERSION_MAX: WARN_ON(1); diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index afd21d5b25ae..58b02ae81706 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -684,6 +684,8 @@ struct ath10k { int max_num_stations; int max_num_vdevs; int max_num_tdls_vdevs; + int num_active_peers; + int num_tids; struct work_struct offchan_tx_work; struct sk_buff_head offchan_tx_queue; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index b0c89b48092d..52fc0249378b 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -354,6 +354,60 @@ enum ath10k_hw_rate_cck { #define NUM_TARGET_CE_CONFIG_WLAN ar->hw_values->num_target_ce_config_wlan +/* Target specific defines for 10.4 firmware */ +#define TARGET_10_4_NUM_VDEVS 16 +#define TARGET_10_4_NUM_STATIONS 32 +#define TARGET_10_4_NUM_PEERS ((TARGET_10_4_NUM_STATIONS) + \ + (TARGET_10_4_NUM_VDEVS)) +#define TARGET_10_4_ACTIVE_PEERS 0 +#define TARGET_10_4_NUM_OFFLOAD_PEERS 0 +#define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS 0 +#define TARGET_10_4_NUM_PEER_KEYS 2 +#define TARGET_10_4_TGT_NUM_TIDS ((TARGET_10_4_NUM_PEERS) * 2) +#define TARGET_10_4_AST_SKID_LIMIT 32 +#define TARGET_10_4_TX_CHAIN_MASK (BIT(0) | BIT(1) | \ + BIT(2) | BIT(3)) +#define TARGET_10_4_RX_CHAIN_MASK (BIT(0) | BIT(1) | \ + BIT(2) | BIT(3)) + +/* 100 ms for video, best-effort, and background */ +#define TARGET_10_4_RX_TIMEOUT_LO_PRI 100 + +/* 40 ms for voice */ +#define TARGET_10_4_RX_TIMEOUT_HI_PRI 40 + +#define TARGET_10_4_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI +#define TARGET_10_4_SCAN_MAX_REQS 4 +#define TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV 3 +#define TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV 3 +#define TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES 8 + +/* Note: mcast to ucast is disabled by default */ +#define TARGET_10_4_NUM_MCAST_GROUPS 0 +#define TARGET_10_4_NUM_MCAST_TABLE_ELEMS 0 +#define TARGET_10_4_MCAST2UCAST_MODE 0 + +#define TARGET_10_4_TX_DBG_LOG_SIZE 1024 +#define TARGET_10_4_NUM_WDS_ENTRIES 32 +#define TARGET_10_4_DMA_BURST_SIZE 1 +#define TARGET_10_4_MAC_AGGR_DELIM 0 +#define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 +#define TARGET_10_4_VOW_CONFIG 0 +#define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV 3 +#define TARGET_10_4_NUM_MSDU_DESC (1024 + 400) +#define TARGET_10_4_11AC_TX_MAX_FRAGS 2 +#define TARGET_10_4_MAX_PEER_EXT_STATS 16 +#define TARGET_10_4_SMART_ANT_CAP 0 +#define TARGET_10_4_BK_MIN_FREE 0 +#define TARGET_10_4_BE_MIN_FREE 0 +#define TARGET_10_4_VI_MIN_FREE 0 +#define TARGET_10_4_VO_MIN_FREE 0 +#define TARGET_10_4_RX_BATCH_MODE 1 +#define TARGET_10_4_THERMAL_THROTTLING_CONFIG 0 +#define TARGET_10_4_ATF_CONFIG 0 +#define TARGET_10_4_IPHDR_PAD_CONFIG 1 +#define TARGET_10_4_QWRAP_CONFIG 0 + /* Number of Copy Engines supported */ #define CE_COUNT ar->hw_values->ce_count diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 3f29886dc880..6c51b20dc8c5 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4641,6 +4641,88 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar) return buf; } +static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar) +{ + struct wmi_init_cmd_10_4 *cmd; + struct sk_buff *buf; + struct wmi_resource_config_10_4 config = {}; + u32 len; + + config.num_vdevs = __cpu_to_le32(ar->max_num_vdevs); + config.num_peers = __cpu_to_le32(ar->max_num_peers); + config.num_active_peers = __cpu_to_le32(ar->num_active_peers); + config.num_tids = __cpu_to_le32(ar->num_tids); + + config.num_offload_peers = __cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_PEERS); + config.num_offload_reorder_buffs = + __cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS); + config.num_peer_keys = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS); + config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT); + config.tx_chain_mask = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK); + config.rx_chain_mask = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK); + + config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri[2] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri[3] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_HI_PRI); + + config.rx_decap_mode = __cpu_to_le32(TARGET_10_4_RX_DECAP_MODE); + config.scan_max_pending_req = __cpu_to_le32(TARGET_10_4_SCAN_MAX_REQS); + config.bmiss_offload_max_vdev = + __cpu_to_le32(TARGET_10_4_BMISS_OFFLOAD_MAX_VDEV); + config.roam_offload_max_vdev = + __cpu_to_le32(TARGET_10_4_ROAM_OFFLOAD_MAX_VDEV); + config.roam_offload_max_ap_profiles = + __cpu_to_le32(TARGET_10_4_ROAM_OFFLOAD_MAX_PROFILES); + config.num_mcast_groups = __cpu_to_le32(TARGET_10_4_NUM_MCAST_GROUPS); + config.num_mcast_table_elems = + __cpu_to_le32(TARGET_10_4_NUM_MCAST_TABLE_ELEMS); + + config.mcast2ucast_mode = __cpu_to_le32(TARGET_10_4_MCAST2UCAST_MODE); + config.tx_dbg_log_size = __cpu_to_le32(TARGET_10_4_TX_DBG_LOG_SIZE); + config.num_wds_entries = __cpu_to_le32(TARGET_10_4_NUM_WDS_ENTRIES); + config.dma_burst_size = __cpu_to_le32(TARGET_10_4_DMA_BURST_SIZE); + config.mac_aggr_delim = __cpu_to_le32(TARGET_10_4_MAC_AGGR_DELIM); + + config.rx_skip_defrag_timeout_dup_detection_check = + __cpu_to_le32(TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK); + + config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG); + config.gtk_offload_max_vdev = + __cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV); + config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC); + config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS); + config.max_peer_ext_stats = + __cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS); + config.smart_ant_cap = __cpu_to_le32(TARGET_10_4_SMART_ANT_CAP); + + config.bk_minfree = __cpu_to_le32(TARGET_10_4_BK_MIN_FREE); + config.be_minfree = __cpu_to_le32(TARGET_10_4_BE_MIN_FREE); + config.vi_minfree = __cpu_to_le32(TARGET_10_4_VI_MIN_FREE); + config.vo_minfree = __cpu_to_le32(TARGET_10_4_VO_MIN_FREE); + + config.rx_batchmode = __cpu_to_le32(TARGET_10_4_RX_BATCH_MODE); + config.tt_support = + __cpu_to_le32(TARGET_10_4_THERMAL_THROTTLING_CONFIG); + config.atf_config = __cpu_to_le32(TARGET_10_4_ATF_CONFIG); + config.iphdr_pad_config = __cpu_to_le32(TARGET_10_4_IPHDR_PAD_CONFIG); + config.qwrap_config = __cpu_to_le32(TARGET_10_4_QWRAP_CONFIG); + + len = sizeof(*cmd) + + (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks); + + buf = ath10k_wmi_alloc_skb(ar, len); + if (!buf) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_init_cmd_10_4 *)buf->data; + memcpy(&cmd->resource_config, &config, sizeof(config)); + ath10k_wmi_put_host_mem_chunks(ar, &cmd->mem_chunks); + + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi init 10.4\n"); + return buf; +} + int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg) { if (arg->ie_len && !arg->ie) @@ -6105,6 +6187,7 @@ static const struct wmi_ops wmi_10_2_4_ops = { static const struct wmi_ops wmi_10_4_ops = { .map_svc = wmi_10_4_svc_map, + .gen_init = ath10k_wmi_10_4_op_gen_init, }; int ath10k_wmi_attach(struct ath10k *ar) diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index f6ee163259f6..dbb9f1c8c917 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -2380,6 +2380,221 @@ struct wmi_resource_config_10_2 { #define NUM_UNITS_IS_NUM_VDEVS 0x1 #define NUM_UNITS_IS_NUM_PEERS 0x2 +struct wmi_resource_config_10_4 { + /* Number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* Number of peer nodes to support */ + __le32 num_peers; + + /* Number of active peer nodes to support */ + __le32 num_active_peers; + + /* In offload mode, target supports features like WOW, chatter and other + * protocol offloads. In order to support them some functionalities like + * reorder buffering, PN checking need to be done in target. + * This determines maximum number of peers supported by target in + * offload mode. + */ + __le32 num_offload_peers; + + /* Number of reorder buffers available for doing target based reorder + * Rx reorder buffering + */ + __le32 num_offload_reorder_buffs; + + /* Number of keys per peer */ + __le32 num_peer_keys; + + /* Total number of TX/RX data TIDs */ + __le32 num_tids; + + /* Max skid for resolving hash collisions. + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* The nominal chain mask for transmit. + * The chain mask may be modified dynamically, e.g. to operate AP tx + * with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* The nominal chain mask for receive. + * The chain mask may be modified dynamically, e.g. for a client to use + * a reduced number of chains for receive if the traffic to the client + * is low enough that it doesn't require downlink MIMO or antenna + * diversity. This configuration parameter specifies the nominal + * chain-mask that should be used when not operating with a reduced + * set of rx chains. + */ + __le32 rx_chain_mask; + + /* What rx reorder timeout (ms) to use for the AC. + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have already + * been received. This parameter specifies the timeout in milliseconds + * for each class. + */ + __le32 rx_timeout_pri[4]; + + /* What mode the rx should decap packets to. + * MAC can decap to RAW (no decap), native wifi or Ethernet types. + * This setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + __le32 scan_max_pending_req; + + __le32 bmiss_offload_max_vdev; + + __le32 roam_offload_max_vdev; + + __le32 roam_offload_max_ap_profiles; + + /* How many groups to use for mcast->ucast conversion. + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each peer + * within the multicast group. This num_mcast_groups configuration + * parameter tells the target how many multicast groups to provide + * storage for within its multicast group membership table. + */ + __le32 num_mcast_groups; + + /* Size to alloc for the mcast membership table. + * This num_mcast_table_elems configuration parameter tells the target + * how many peer elements it needs to provide storage for in its + * multicast group membership table. These multicast group membership + * table elements are shared by the multicast groups stored within + * the table. + */ + __le32 num_mcast_table_elems; + + /* Whether/how to do multicast->unicast conversion. + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group membership + * table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast address + * from the tx frame is found in the multicast group membership + * table. If the IP multicast address is not found, drop the frame + * 2 -> Convert multicast frames to unicast, if the IP multicast address + * from the tx frame is found in the multicast group membership + * table. If the IP multicast address is not found, transmit the + * frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* How much memory to allocate for a tx PPDU dbg log. + * This parameter controls how much memory the target will allocate to + * store a log of tx PPDU meta-information (how large the PPDU was, + * when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* How many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* MAC DMA burst size. 0 -default, 1 -256B */ + __le32 dma_burst_size; + + /* Fixed delimiters to be inserted after every MPDU to account for + * interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* Determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering + * is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* Configuration for VoW : No of Video nodes to be supported and max + * no of descriptors for each video link (node). + */ + __le32 vow_config; + + /* Maximum vdev that could use gtk offload */ + __le32 gtk_offload_max_vdev; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* Max number of tx fragments per MSDU. + * This parameter controls the max number of tx fragments per MSDU. + * This will passed by target as part of the WMI_SERVICE_READY event + * and is overridden by the OS shim as required. + */ + __le32 max_frag_entries; + + /* Max number of extended peer stats. + * This parameter controls the max number of peers for which extended + * statistics are supported by target + */ + __le32 max_peer_ext_stats; + + /* Smart antenna capabilities information. + * 1 - Smart antenna is enabled + * 0 - Smart antenna is disabled + * In future this can contain smart antenna specific capabilities. + */ + __le32 smart_ant_cap; + + /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) + * during init. + */ + __le32 bk_minfree; + __le32 be_minfree; + __le32 vi_minfree; + __le32 vo_minfree; + + /* Rx batch mode capability. + * 1 - Rx batch mode enabled + * 0 - Rx batch mode disabled + */ + __le32 rx_batchmode; + + /* Thermal throttling capability. + * 1 - Capable of thermal throttling + * 0 - Not capable of thermal throttling + */ + __le32 tt_support; + + /* ATF configuration. + * 1 - Enable ATF + * 0 - Disable ATF + */ + __le32 atf_config; + + /* Configure padding to manage IP header un-alignment + * 1 - Enable padding + * 0 - Disable padding + */ + __le32 iphdr_pad_config; + + /* qwrap configuration + * 1 - This is qwrap configuration + * 0 - This is not qwrap + */ + __le32 qwrap_config; +} __packed; + /* strucutre describing host memory chunk. */ struct host_memory_chunk { /* id of the request that is passed up in service ready */ @@ -2412,6 +2627,11 @@ struct wmi_init_cmd_10_2 { struct wmi_host_mem_chunks mem_chunks; } __packed; +struct wmi_init_cmd_10_4 { + struct wmi_resource_config_10_4 resource_config; + struct wmi_host_mem_chunks mem_chunks; +} __packed; + struct wmi_chan_list_entry { __le16 freq; u8 phy_mode; /* valid for 10.2 only */ |