diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 27 | ||||
| -rw-r--r-- | drivers/regulator/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 2 | ||||
| -rw-r--r-- | drivers/regulator/pwm-regulator.c | 197 | ||||
| -rw-r--r-- | drivers/regulator/st-pwm.c | 190 |
5 files changed, 232 insertions, 197 deletions
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt new file mode 100644 index 000000000000..ce91f61feb12 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -0,0 +1,27 @@ +pwm regulator bindings + +Required properties: +- compatible: Should be "pwm-regulator" +- pwms: OF device-tree PWM specification (see PWM binding pwm.txt) +- voltage-table: voltage and duty table, include 2 members in each set of + brackets, first one is voltage(unit: uv), the next is duty(unit: percent) + +Any property defined as part of the core regulator binding defined in +regulator.txt can also be used. + +Example: + pwm_regulator { + compatible = "pwm-regulator; + pwms = <&pwm1 0 8448 0>; + + voltage-table = <1114000 0>, + <1095000 10>, + <1076000 20>, + <1056000 30>, + <1036000 40>, + <1016000 50>; + + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 0e59754d8df2..c3ca05cb5c87 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -449,6 +449,13 @@ config REGULATOR_PFUZE100 Say y here to support the regulators found on the Freescale PFUZE100/PFUZE200 PMIC. +config REGULATOR_PWM + tristate "PWM voltage regulator" + depends on PWM + help + This driver supports PWM controlled voltage regulators. PWM + duty cycle can increase or decrease the voltage. + config REGULATOR_QCOM_RPM tristate "Qualcomm RPM regulator driver" depends on MFD_QCOM_RPM @@ -495,12 +502,6 @@ config REGULATOR_S5M8767 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. -config REGULATOR_ST_PWM - tristate "STMicroelectronics PWM voltage regulator" - depends on ARCH_STI - help - This driver supports ST's PWM controlled voltage regulators. - config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9c50dc61d927..2f49356e03a7 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o +obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o @@ -66,7 +67,6 @@ obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o -obj-$(CONFIG_REGULATOR_ST_PWM) += st-pwm.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c new file mode 100644 index 000000000000..d3f55eaea058 --- /dev/null +++ b/drivers/regulator/pwm-regulator.c @@ -0,0 +1,197 @@ +/* + * Regulator driver for PWM Regulators + * + * Copyright (C) 2014 - STMicroelectronics Inc. + * + * Author: Lee Jones <lee.jones@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pwm.h> + +struct pwm_regulator_data { + struct regulator_desc desc; + struct pwm_voltages *duty_cycle_table; + struct pwm_device *pwm; + bool enabled; + int state; +}; + +struct pwm_voltages { + unsigned int uV; + unsigned int dutycycle; +}; + +static int pwm_regulator_get_voltage_sel(struct regulator_dev *dev) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + return drvdata->state; +} + +static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev, + unsigned selector) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + unsigned int pwm_reg_period; + int dutycycle; + int ret; + + pwm_reg_period = pwm_get_period(drvdata->pwm); + + dutycycle = (pwm_reg_period * + drvdata->duty_cycle_table[selector].dutycycle) / 100; + + ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period); + if (ret) { + dev_err(&dev->dev, "Failed to configure PWM\n"); + return ret; + } + + drvdata->state = selector; + + if (!drvdata->enabled) { + ret = pwm_enable(drvdata->pwm); + if (ret) { + dev_err(&dev->dev, "Failed to enable PWM\n"); + return ret; + } + drvdata->enabled = true; + } + + return 0; +} + +static int pwm_regulator_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + if (selector >= drvdata->desc.n_voltages) + return -EINVAL; + + return drvdata->duty_cycle_table[selector].uV; +} + +static struct regulator_ops pwm_regulator_voltage_ops = { + .set_voltage_sel = pwm_regulator_set_voltage_sel, + .get_voltage_sel = pwm_regulator_get_voltage_sel, + .list_voltage = pwm_regulator_list_voltage, + .map_voltage = regulator_map_voltage_iterate, +}; + +static const struct regulator_desc pwm_regulator_desc = { + .name = "pwm-regulator", + .ops = &pwm_regulator_voltage_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .supply_name = "pwm", +}; + +static int pwm_regulator_probe(struct platform_device *pdev) +{ + struct pwm_regulator_data *drvdata; + struct property *prop; + struct regulator_dev *regulator; + struct regulator_config config = { }; + struct device_node *np = pdev->dev.of_node; + int length, ret; + + if (!np) { + dev_err(&pdev->dev, "Device Tree node missing\n"); + return -EINVAL; + } + + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc)); + + /* determine the number of voltage-table */ + prop = of_find_property(np, "voltage-table", &length); + if (!prop) { + dev_err(&pdev->dev, "No voltage-table\n"); + return -EINVAL; + } + + if ((length < sizeof(*drvdata->duty_cycle_table)) || + (length % sizeof(*drvdata->duty_cycle_table))) { + dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n", + length); + return -EINVAL; + } + + drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table); + + drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev, + length, GFP_KERNEL); + if (!drvdata->duty_cycle_table) + return -ENOMEM; + + /* read voltage table from DT property */ + ret = of_property_read_u32_array(np, "voltage-table", + (u32 *)drvdata->duty_cycle_table, + length / sizeof(u32)); + if (ret < 0) { + dev_err(&pdev->dev, "read voltage-table failed\n"); + return ret; + } + + config.init_data = of_get_regulator_init_data(&pdev->dev, np); + if (!config.init_data) + return -ENOMEM; + + config.of_node = np; + config.dev = &pdev->dev; + config.driver_data = drvdata; + + drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); + if (IS_ERR(drvdata->pwm)) { + dev_err(&pdev->dev, "Failed to get PWM\n"); + return PTR_ERR(drvdata->pwm); + } + + regulator = devm_regulator_register(&pdev->dev, + &drvdata->desc, &config); + if (IS_ERR(regulator)) { + dev_err(&pdev->dev, "Failed to register regulator %s\n", + drvdata->desc.name); + return PTR_ERR(regulator); + } + + return 0; +} + +static const struct of_device_id pwm_of_match[] = { + { .compatible = "pwm-regulator" }, + { }, +}; +MODULE_DEVICE_TABLE(of, pwm_of_match); + +static struct platform_driver pwm_regulator_driver = { + .driver = { + .name = "pwm-regulator", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pwm_of_match), + }, + .probe = pwm_regulator_probe, +}; + +module_platform_driver(pwm_regulator_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>"); +MODULE_DESCRIPTION("PWM Regulator Driver"); +MODULE_ALIAS("platform:pwm-regulator"); diff --git a/drivers/regulator/st-pwm.c b/drivers/regulator/st-pwm.c deleted file mode 100644 index 5ea78df449f8..000000000000 --- a/drivers/regulator/st-pwm.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Regulator driver for ST's PWM Regulators - * - * Copyright (C) 2014 - STMicroelectronics Inc. - * - * Author: Lee Jones <lee.jones@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/regulator/driver.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/of_regulator.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/pwm.h> - -#define ST_PWM_REG_PERIOD 8448 - -struct st_pwm_regulator_pdata { - const struct regulator_desc *desc; - struct st_pwm_voltages *duty_cycle_table; -}; - -struct st_pwm_regulator_data { - const struct st_pwm_regulator_pdata *pdata; - struct pwm_device *pwm; - bool enabled; - int state; -}; - -struct st_pwm_voltages { - unsigned int uV; - unsigned int dutycycle; -}; - -static int st_pwm_regulator_get_voltage_sel(struct regulator_dev *dev) -{ - struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev); - - return drvdata->state; -} - -static int st_pwm_regulator_set_voltage_sel(struct regulator_dev *dev, - unsigned selector) -{ - struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev); - int dutycycle; - int ret; - - dutycycle = (ST_PWM_REG_PERIOD / 100) * - drvdata->pdata->duty_cycle_table[selector].dutycycle; - - ret = pwm_config(drvdata->pwm, dutycycle, ST_PWM_REG_PERIOD); - if (ret) { - dev_err(&dev->dev, "Failed to configure PWM\n"); - return ret; - } - - drvdata->state = selector; - - if (!drvdata->enabled) { - ret = pwm_enable(drvdata->pwm); - if (ret) { - dev_err(&dev->dev, "Failed to enable PWM\n"); - return ret; - } - drvdata->enabled = true; - } - - return 0; -} - -static int st_pwm_regulator_list_voltage(struct regulator_dev *dev, - unsigned selector) -{ - struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev); - - if (selector >= dev->desc->n_voltages) - return -EINVAL; - - return drvdata->pdata->duty_cycle_table[selector].uV; -} - -static struct regulator_ops st_pwm_regulator_voltage_ops = { - .set_voltage_sel = st_pwm_regulator_set_voltage_sel, - .get_voltage_sel = st_pwm_regulator_get_voltage_sel, - .list_voltage = st_pwm_regulator_list_voltage, - .map_voltage = regulator_map_voltage_iterate, -}; - -static struct st_pwm_voltages b2105_duty_cycle_table[] = { - { .uV = 1114000, .dutycycle = 0, }, - { .uV = 1095000, .dutycycle = 10, }, - { .uV = 1076000, .dutycycle = 20, }, - { .uV = 1056000, .dutycycle = 30, }, - { .uV = 1036000, .dutycycle = 40, }, - { .uV = 1016000, .dutycycle = 50, }, - /* WARNING: Values above 50% duty-cycle cause boot failures. */ -}; - -static const struct regulator_desc b2105_desc = { - .name = "b2105-pwm-regulator", - .ops = &st_pwm_regulator_voltage_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .n_voltages = ARRAY_SIZE(b2105_duty_cycle_table), - .supply_name = "pwm", -}; - -static const struct st_pwm_regulator_pdata b2105_info = { - .desc = &b2105_desc, - .duty_cycle_table = b2105_duty_cycle_table, -}; - -static const struct of_device_id st_pwm_of_match[] = { - { .compatible = "st,b2105-pwm-regulator", .data = &b2105_info, }, - { }, -}; -MODULE_DEVICE_TABLE(of, st_pwm_of_match); - -static int st_pwm_regulator_probe(struct platform_device *pdev) -{ - struct st_pwm_regulator_data *drvdata; - struct regulator_dev *regulator; - struct regulator_config config = { }; - struct device_node *np = pdev->dev.of_node; - const struct of_device_id *of_match; - - if (!np) { - dev_err(&pdev->dev, "Device Tree node missing\n"); - return -EINVAL; - } - - drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); - if (!drvdata) - return -ENOMEM; - - of_match = of_match_device(st_pwm_of_match, &pdev->dev); - if (!of_match) { - dev_err(&pdev->dev, "failed to match of device\n"); - return -ENODEV; - } - drvdata->pdata = of_match->data; - - config.init_data = of_get_regulator_init_data(&pdev->dev, np); - if (!config.init_data) - return -ENOMEM; - - config.of_node = np; - config.dev = &pdev->dev; - config.driver_data = drvdata; - - drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); - if (IS_ERR(drvdata->pwm)) { - dev_err(&pdev->dev, "Failed to get PWM\n"); - return PTR_ERR(drvdata->pwm); - } - - regulator = devm_regulator_register(&pdev->dev, - drvdata->pdata->desc, &config); - if (IS_ERR(regulator)) { - dev_err(&pdev->dev, "Failed to register regulator %s\n", - drvdata->pdata->desc->name); - return PTR_ERR(regulator); - } - - return 0; -} - -static struct platform_driver st_pwm_regulator_driver = { - .driver = { - .name = "st-pwm-regulator", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(st_pwm_of_match), - }, - .probe = st_pwm_regulator_probe, -}; - -module_platform_driver(st_pwm_regulator_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>"); -MODULE_DESCRIPTION("ST PWM Regulator Driver"); -MODULE_ALIAS("platform:st_pwm-regulator"); |