diff options
| -rw-r--r-- | arch/x86/boot/video-bios.c | 27 | ||||
| -rw-r--r-- | arch/x86/boot/video-vesa.c | 137 | ||||
| -rw-r--r-- | arch/x86/boot/video-vga.c | 95 | ||||
| -rw-r--r-- | arch/x86/boot/video.c | 42 | ||||
| -rw-r--r-- | arch/x86/boot/video.h | 14 |
5 files changed, 151 insertions, 164 deletions
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c index 3fa979c9c363..d660be492363 100644 --- a/arch/x86/boot/video-bios.c +++ b/arch/x86/boot/video-bios.c @@ -2,6 +2,7 @@ * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin * * This file is part of the Linux kernel, and is made available under * the terms of the GNU General Public License version 2. @@ -29,21 +30,21 @@ static int bios_set_mode(struct mode_info *mi) static int set_bios_mode(u8 mode) { - u16 ax; + struct biosregs ireg, oreg; u8 new_mode; - ax = mode; /* AH=0x00 Set Video Mode */ - asm volatile(INT10 - : "+a" (ax) - : : "ebx", "ecx", "edx", "esi", "edi"); + initregs(&ireg); + ireg.al = mode; /* AH=0x00 Set Video Mode */ + intcall(0x10, &ireg, NULL); - ax = 0x0f00; /* Get Current Video Mode */ - asm volatile(INT10 - : "+a" (ax) - : : "ebx", "ecx", "edx", "esi", "edi"); + + ireg.ah = 0x0f; /* Get Current Video Mode */ + intcall(0x10, &ireg, &oreg); do_restore = 1; /* Assume video contents were lost */ - new_mode = ax & 0x7f; /* Not all BIOSes are clean with the top bit */ + + /* Not all BIOSes are clean with the top bit */ + new_mode = ireg.al & 0x7f; if (new_mode == mode) return 0; /* Mode change OK */ @@ -53,10 +54,8 @@ static int set_bios_mode(u8 mode) /* Mode setting failed, but we didn't end up where we started. That's bad. Try to revert to the original video mode. */ - ax = boot_params.screen_info.orig_video_mode; - asm volatile(INT10 - : "+a" (ax) - : : "ebx", "ecx", "edx", "esi", "edi"); + ireg.ax = boot_params.screen_info.orig_video_mode; + intcall(0x10, &ireg, NULL); } #endif return -1; diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 4a58c8ce3f69..c700147d6ffb 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -2,6 +2,7 @@ * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin * * This file is part of the Linux kernel, and is made available under * the terms of the GNU General Public License version 2. @@ -31,7 +32,7 @@ static inline void vesa_store_mode_params_graphics(void) {} static int vesa_probe(void) { #if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID) - u16 ax, cx, di; + struct biosregs ireg, oreg; u16 mode; addr_t mode_ptr; struct mode_info *mi; @@ -39,13 +40,12 @@ static int vesa_probe(void) video_vesa.modes = GET_HEAP(struct mode_info, 0); - ax = 0x4f00; - di = (size_t)&vginfo; - asm(INT10 - : "+a" (ax), "+D" (di), "=m" (vginfo) - : : "ebx", "ecx", "edx", "esi"); + initregs(&ireg); + ireg.ax = 0x4f00; + ireg.di = (size_t)&vginfo; + intcall(0x10, &ireg, &oreg); - if (ax != 0x004f || + if (ireg.ax != 0x004f || vginfo.signature != VESA_MAGIC || vginfo.version < 0x0102) return 0; /* Not present */ @@ -65,14 +65,12 @@ static int vesa_probe(void) memset(&vminfo, 0, sizeof vminfo); /* Just in case... */ - ax = 0x4f01; - cx = mode; - di = (size_t)&vminfo; - asm(INT10 - : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo) - : : "ebx", "edx", "esi"); + ireg.ax = 0x4f01; + ireg.cx = mode; + ireg.di = (size_t)&vminfo; + intcall(0x10, &ireg, &oreg); - if (ax != 0x004f) + if (ireg.ax != 0x004f) continue; if ((vminfo.mode_attr & 0x15) == 0x05) { @@ -111,20 +109,19 @@ static int vesa_probe(void) static int vesa_set_mode(struct mode_info *mode) { - u16 ax, bx, cx, di; + struct biosregs ireg, oreg; int is_graphic; u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA; memset(&vminfo, 0, sizeof vminfo); /* Just in case... */ - ax = 0x4f01; - cx = vesa_mode; - di = (size_t)&vminfo; - asm(INT10 - : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo) - : : "ebx", "edx", "esi"); + initregs(&ireg); + ireg.ax = 0x4f01; + ireg.cx = vesa_mode; + ireg.di = (size_t)&vminfo; + intcall(0x10, &ireg, &oreg); - if (ax != 0x004f) + if (oreg.ax != 0x004f) return -1; if ((vminfo.mode_attr & 0x15) == 0x05) { @@ -141,14 +138,12 @@ static int vesa_set_mode(struct mode_info *mode) } - ax = 0x4f02; - bx = vesa_mode; - di = 0; - asm volatile(INT10 - : "+a" (ax), "+b" (bx), "+D" (di) - : : "ecx", "edx", "esi"); + initregs(&ireg); + ireg.ax = 0x4f02; + ireg.bx = vesa_mode; + intcall(0x10, &ireg, &oreg); - if (ax != 0x004f) + if (oreg.ax != 0x004f) return -1; graphic_mode = is_graphic; @@ -171,50 +166,45 @@ static int vesa_set_mode(struct mode_info *mode) /* Switch DAC to 8-bit mode */ static void vesa_dac_set_8bits(void) { + struct biosregs ireg, oreg; u8 dac_size = 6; /* If possible, switch the DAC to 8-bit mode */ if (vginfo.capabilities & 1) { - u16 ax, bx; - - ax = 0x4f08; - bx = 0x0800; - asm volatile(INT10 - : "+a" (ax), "+b" (bx) - : : "ecx", "edx", "esi", "edi"); - - if (ax == 0x004f) - dac_size = bx >> 8; + initregs(&ireg); + ireg.ax = 0x4f08; + ireg.bh = 0x08; + intcall(0x10, &ireg, &oreg); + if (oreg.ax == 0x004f) + dac_size = oreg.bh; } /* Set the color sizes to the DAC size, and offsets to 0 */ - boot_params.screen_info.red_size = dac_size; + boot_params.screen_info.red_size = dac_size; boot_params.screen_info.green_size = dac_size; - boot_params.screen_info.blue_size = dac_size; - boot_params.screen_info.rsvd_size = dac_size; + boot_params.screen_info.blue_size = dac_size; + boot_params.screen_info.rsvd_size = dac_size; - boot_params.screen_info.red_pos = 0; - boot_params.screen_info.green_pos = 0; - boot_params.screen_info.blue_pos = 0; - boot_params.screen_info.rsvd_pos = 0; + boot_params.screen_info.red_pos = 0; + boot_params.screen_info.green_pos = 0; + boot_params.screen_info.blue_pos = 0; + boot_params.screen_info.rsvd_pos = 0; } /* Save the VESA protected mode info */ static void vesa_store_pm_info(void) { - u16 ax, bx, di, es; + struct biosregs ireg, oreg; - ax = 0x4f0a; - bx = di = 0; - asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es" - : "=d" (es), "+a" (ax), "+b" (bx), "+D" (di) - : : "ecx", "esi"); + initregs(&ireg); + ireg.ax = 0x4f0a; + intcall(0x10, &ireg, &oreg); - if (ax != 0x004f) + if (oreg.ax != 0x004f) return; - boot_params.screen_info.vesapm_seg = es; - boot_params.screen_info.vesapm_off = di; + boot_params.screen_info.vesapm_seg = oreg.es; + boot_params.screen_info.vesapm_off = oreg.di; } /* @@ -252,7 +242,7 @@ static void vesa_store_mode_params_graphics(void) void vesa_store_edid(void) { #ifdef CONFIG_FIRMWARE_EDID - u16 ax, bx, cx, dx, di; + struct biosregs ireg, oreg; /* Apparently used as a nonsense token... */ memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info); @@ -260,33 +250,26 @@ void vesa_store_edid(void) if (vginfo.version < 0x0200) return; /* EDID requires VBE 2.0+ */ - ax = 0x4f15; /* VBE DDC */ - bx = 0x0000; /* Report DDC capabilities */ - cx = 0; /* Controller 0 */ - di = 0; /* ES:DI must be 0 by spec */ - - /* Note: The VBE DDC spec is different from the main VESA spec; - we genuinely have to assume all registers are destroyed here. */ - - asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es" - : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di) - : : "esi", "edx"); + initregs(&ireg); + ireg.ax = 0x4f15; /* VBE DDC */ + /* ireg.bx = 0x0000; */ /* Report DDC capabilities */ + /* ireg.cx = 0; */ /* Controller 0 */ + ireg.es = 0; /* ES:DI must be 0 by spec */ + intcall(0x10, &ireg, &oreg); - if (ax != 0x004f) + if (oreg.ax != 0x004f) return; /* No EDID */ /* BH = time in seconds to transfer EDD information */ /* BL = DDC level supported */ - ax = 0x4f15; /* VBE DDC */ - bx = 0x0001; /* Read EDID */ - cx = 0; /* Controller 0 */ - dx = 0; /* EDID block number */ - di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */ - asm(INT10 - : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info), - "+c" (cx), "+D" (di) - : : "esi"); + ireg.ax = 0x4f15; /* VBE DDC */ + ireg.bx = 0x0001; /* Read EDID */ + /* ireg.cx = 0; */ /* Controller 0 */ + /* ireg.dx = 0; */ /* EDID block number */ + ireg.es = ds(); + ireg.di =(size_t)&boot_params.edid_info; /* (ES:)Pointer to block */ + intcall(0x10, &ireg, &oreg); #endif /* CONFIG_FIRMWARE_EDID */ } diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 9e0587a37768..8f8d827e254d 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -2,6 +2,7 @@ * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin * * This file is part of the Linux kernel, and is made available under * the terms of the GNU General Public License version 2. @@ -39,30 +40,30 @@ static __videocard video_vga; /* Set basic 80x25 mode */ static u8 vga_set_basic_mode(void) { + struct biosregs ireg, oreg; u16 ax; u8 rows; u8 mode; + initregs(&ireg); + #ifdef CONFIG_VIDEO_400_HACK if (adapter >= ADAPTER_VGA) { - asm volatile(INT10 - : : "a" (0x1202), "b" (0x0030) - : "ecx", "edx", "esi", "edi"); + ireg.ax = 0x1202; + ireg.bx = 0x0030; + intcall(0x10, &ireg, NULL); } #endif ax = 0x0f00; - asm volatile(INT10 - : "+a" (ax) - : : "ebx", "ecx", "edx", "esi", "edi"); - - mode = (u8)ax; + intcall(0x10, &ireg, &oreg); + mode = oreg.al; set_fs(0); rows = rdfs8(0x484); /* rows minus one */ #ifndef CONFIG_VIDEO_400_HACK - if ((ax == 0x5003 || ax == 0x5007) && + if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) && (rows == 0 || rows == 24)) return mode; #endif @@ -71,10 +72,8 @@ static u8 vga_set_basic_mode(void) mode = 3; /* Set the mode */ - ax = mode; - asm volatile(INT10 - : "+a" (ax) - : : "ebx", "ecx", "edx", "esi", "edi"); + ireg.ax = mode; /* AH=0: set mode */ + intcall(0x10, &ireg, NULL); do_restore = 1; return mode; } @@ -82,43 +81,69 @@ static u8 vga_set_basic_mode(void) static void vga_set_8font(void) { /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */ + struct biosregs ireg; + + initregs(&ireg); /* Set 8x8 font */ - asm volatile(INT10 : : "a" (0x1112), "b" (0)); + ireg.ax = 0x1112; + /* ireg.bl = 0; */ + intcall(0x10, &ireg, NULL); /* Use alternate print screen */ - asm volatile(INT10 : : "a" (0x1200), "b" (0x20)); + ireg.ax = 0x1200; + ireg.bl = 0x20; + intcall(0x10, &ireg, NULL); /* Turn off cursor emulation */ - asm volatile(INT10 : : "a" (0x1201), "b" (0x34)); + ireg.ax = 0x1201; + ireg.bl = 0x34; + intcall(0x10, &ireg, NULL); /* Cursor is scan lines 6-7 */ - asm volatile(INT10 : : "a" (0x0100), "c" (0x0607)); + ireg.ax = 0x0100; + ireg.cx = 0x0607; + intcall(0x10, &ireg, NULL); } static void vga_set_14font(void) { /* Set 9x14 font - 80x28 on VGA */ + struct biosregs ireg; + + initregs(&ireg); /* Set 9x14 font */ - asm volatile(INT10 : : "a" (0x1111), "b" (0)); + ireg.ax = 0x1111; + /* ireg.bl = 0; */ + intcall(0x10, &ireg, NULL); /* Turn off cursor emulation */ - asm volatile(INT10 : : "a" (0x1201), "b" (0x34)); + ireg.ax = 0x1201; + ireg.bl = 0x34; + intcall(0x10, &ireg, NULL); /* Cursor is scan lines 11-12 */ - asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c)); + ireg.ax = 0x0100; + ireg.cx = 0x0b0c; + intcall(0x10, &ireg, NULL); } static void vga_set_80x43(void) { /* Set 80x43 mode on VGA (not EGA) */ + struct biosregs ireg; + + initregs(&ireg); /* Set 350 scans */ - asm volatile(INT10 : : "a" (0x1201), "b" (0x30)); + ireg.ax = 0x1201; + ireg.bl = 0x30; + intcall(0x10, &ireg, NULL); /* Reset video mode */ - asm volatile(INT10 : : "a" (0x0003)); + ireg.ax = 0x0003; + intcall(0x10, &ireg, NULL); vga_set_8font(); } @@ -225,8 +250,6 @@ static int vga_set_mode(struct mode_info *mode) */ static int vga_probe(void) { - u16 ega_bx; - static const char *card_name[] = { "CGA/MDA/HGC", "EGA", "VGA" }; @@ -240,26 +263,26 @@ static int vga_probe(void) sizeof(ega_modes)/sizeof(struct mode_info), sizeof(vga_modes)/sizeof(struct mode_info), }; - u8 vga_flag; - asm(INT10 - : "=b" (ega_bx) - : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */ - : "ecx", "edx", "esi", "edi"); + struct biosregs ireg, oreg; + + initregs(&ireg); + + ireg.ax = 0x1200; + ireg.bl = 0x10; /* Check EGA/VGA */ + intcall(0x10, &ireg, &oreg); #ifndef _WAKEUP - boot_params.screen_info.orig_video_ega_bx = ega_bx; + boot_params.screen_info.orig_video_ega_bx = oreg.bx; #endif /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */ - if ((u8)ega_bx != 0x10) { + if (oreg.bl != 0x10) { /* EGA/VGA */ - asm(INT10 - : "=a" (vga_flag) - : "a" (0x1a00) - : "ebx", "ecx", "edx", "esi", "edi"); + ireg.ax = 0x1a00; + intcall(0x10, &ireg, &oreg); - if (vga_flag == 0x1a) { + if (oreg.al == 0x1a) { adapter = ADAPTER_VGA; #ifndef _WAKEUP boot_params.screen_info.orig_video_isVGA = 1; diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c index 3bef2c1febe9..bad728b76fc2 100644 --- a/arch/x86/boot/video.c +++ b/arch/x86/boot/video.c @@ -2,6 +2,7 @@ * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin * * This file is part of the Linux kernel, and is made available under * the terms of the GNU General Public License version 2. @@ -18,33 +19,29 @@ static void store_cursor_position(void) { - u16 curpos; - u16 ax, bx; + struct biosregs ireg, oreg; - ax = 0x0300; - bx = 0; - asm(INT10 - : "=d" (curpos), "+a" (ax), "+b" (bx) - : : "ecx", "esi", "edi"); + initregs(&ireg); + ireg.ah = 0x03; + intcall(0x10, &ireg, &oreg); - boot_params.screen_info.orig_x = curpos; - boot_params.screen_info.orig_y = curpos >> 8; + boot_params.screen_info.orig_x = oreg.dl; + boot_params.screen_info.orig_y = oreg.dh; } static void store_video_mode(void) { - u16 ax, page; + struct biosregs ireg, oreg; /* N.B.: the saving of the video page here is a bit silly, since we pretty much assume page 0 everywhere. */ - ax = 0x0f00; - asm(INT10 - : "+a" (ax), "=b" (page) - : : "ecx", "edx", "esi", "edi"); + initregs(&ireg); + ireg.ah = 0x0f; + intcall(0x10, &ireg, &oreg); /* Not all BIOSes are clean with respect to the top bit */ - boot_params.screen_info.orig_video_mode = ax & 0x7f; - boot_params.screen_info.orig_video_page = page >> 8; + boot_params.screen_info.orig_video_mode = oreg.al & 0x7f; + boot_params.screen_info.orig_video_page = oreg.bh; } /* @@ -257,7 +254,7 @@ static void restore_screen(void) int y; addr_t dst = 0; u16 *src = saved.data; - u16 ax, bx, dx; + struct biosregs ireg; if (graphic_mode) return; /* Can't restore onto a graphic mode */ @@ -296,12 +293,11 @@ static void restore_screen(void) } /* Restore cursor position */ - ax = 0x0200; /* Set cursor position */ - bx = 0; /* Page number (<< 8) */ - dx = (saved.cury << 8)+saved.curx; - asm volatile(INT10 - : "+a" (ax), "+b" (bx), "+d" (dx) - : : "ecx", "esi", "edi"); + initregs(&ireg); + ireg.ah = 0x02; /* Set cursor position */ + ireg.dh = saved.cury; + ireg.dl = saved.curx; + intcall(0x10, &ireg, NULL); } #else #define save_screen() ((void)0) diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h index ee63f5d14461..5bb174a997fc 100644 --- a/arch/x86/boot/video.h +++ b/arch/x86/boot/video.h @@ -112,20 +112,6 @@ extern int force_x, force_y; /* Don't query the BIOS for cols/rows */ extern int do_restore; /* Restore screen contents */ extern int graphic_mode; /* Graphics mode with linear frame buffer */ -/* - * int $0x10 is notorious for touching registers it shouldn't. - * gcc doesn't like %ebp being clobbered, so define it as a push/pop - * sequence here. - * - * A number of systems, including the original PC can clobber %bp in - * certain circumstances, like when scrolling. There exists at least - * one Trident video card which could clobber DS under a set of - * circumstances that we are unlikely to encounter (scrolling when - * using an extended graphics mode of more than 800x600 pixels), but - * it's cheap insurance to deal with that here. - */ -#define INT10 "pushl %%ebp; pushw %%ds; int $0x10; popw %%ds; popl %%ebp" - /* Accessing VGA indexed registers */ static inline u8 in_idx(u16 port, u8 index) { |