summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-s3c2410/include/mach/map.h80
-rw-r--r--arch/arm/mach-s3c24a0/include/mach/map.h5
-rw-r--r--arch/arm/plat-s3c/include/plat/map-base.h (renamed from arch/arm/plat-s3c/include/plat/map.h)0
-rw-r--r--arch/arm/plat-s3c24xx/devs.c8
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/map.h99
5 files changed, 111 insertions, 81 deletions
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 6e08594d7162..6b30361a0805 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,34 +13,20 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H
+#include <plat/map-base.h>
#include <plat/map.h>
#define S3C2410_ADDR(x) S3C_ADDR(x)
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
/* DMA controller */
#define S3C2410_PA_DMA (0x4B000000)
#define S3C24XX_SZ_DMA SZ_1M
/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
#define S3C2410_PA_CLKPWR (0x4C000000)
-#define S3C24XX_SZ_CLKPWR SZ_1M
/* LCD controller */
#define S3C2410_PA_LCD (0x4D000000)
@@ -48,48 +34,12 @@
/* NAND flash controller */
#define S3C2410_PA_NAND (0x4E000000)
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
/* IIC hardware controller */
#define S3C2410_PA_IIC (0x54000000)
-#define S3C24XX_SZ_IIC SZ_1M
/* IIS controller */
#define S3C2410_PA_IIS (0x55000000)
-#define S3C24XX_SZ_IIS SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
/* RTC */
#define S3C2410_PA_RTC (0x57000000)
@@ -97,15 +47,12 @@
/* ADC */
#define S3C2410_PA_ADC (0x58000000)
-#define S3C24XX_SZ_ADC SZ_1M
/* SPI */
#define S3C2410_PA_SPI (0x59000000)
-#define S3C24XX_SZ_SPI SZ_1M
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
-#define S3C24XX_SZ_SDI SZ_1M
/* CAMIF */
#define S3C2440_PA_CAMIF (0x4F000000)
@@ -120,13 +67,6 @@
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2443_SZ_HSMMC (256)
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
/* physical addresses of all the chip-select areas */
#define S3C2410_CS0 (0x00000000)
@@ -158,21 +98,7 @@
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C24XX_PA_SDI S3C2410_PA_SDI
+#define S3C24XX_PA_NAND S3C2410_PA_NAND
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 65a146fd78ec..2ce1839de4ee 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -14,6 +14,9 @@
#ifndef __ASM_ARCH_24A0_MAP_H
#define __ASM_ARCH_24A0_MAP_H __FILE__
+#include <plat/map-base.h>
+#include <plat/map.h>
+
#define S3C24A0_PA_IO_BASE (0x40000000)
#define S3C24A0_PA_CLKPWR (0x40000000)
#define S3C24A0_PA_IRQ (0x40200000)
@@ -74,5 +77,7 @@
#define S3C24XX_PA_RTC S3C24A0_PA_RTC
#define S3C24XX_PA_ADC S3C24A0_PA_ADC
#define S3C24XX_PA_SPI S3C24A0_PA_SPI
+#define S3C24XX_PA_SDI S3C24A0_PA_SDI
+#define S3C24XX_PA_NAND S3C24A0_PA_NAND
#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a54..b84289d32a54 100644
--- a/arch/arm/plat-s3c/include/plat/map.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index adf535aaf43a..ea445850ff47 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -192,8 +192,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
static struct resource s3c_nand_resource[] = {
[0] = {
- .start = S3C2410_PA_NAND,
- .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
+ .start = S3C24XX_PA_NAND,
+ .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -382,8 +382,8 @@ struct platform_device s3c_device_adc = {
static struct resource s3c_sdi_resource[] = {
[0] = {
- .start = S3C2410_PA_SDI,
- .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
+ .start = S3C24XX_PA_SDI,
+ .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
new file mode 100644
index 000000000000..6222ba8341d4
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -0,0 +1,99 @@
+/* linux/include/asm-arm/plat-s3c24xx/map.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S3C24XX_MAP_H
+#define __ASM_PLAT_S3C24XX_MAP_H
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART S3C_VA_UART
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_SZ_UART SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_IIC SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO SZ_1M
+
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_PLAT_S3C24XX_MAP_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 12:40:46 +0000