diff options
| -rw-r--r-- | drivers/message/fusion/mptsas.c | 119 |
1 files changed, 63 insertions, 56 deletions
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index e0a65a348502..85285ba8e817 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -86,7 +86,7 @@ MODULE_PARM_DESC(mpt_pt_clear, " Clear persistency table: enable=1 " "(default=MPTSCSIH_PT_CLEAR=0)"); -/* scsi-mid layer global parmeter is max_report_luns, which is 511 */ +/* scsi-mid layer global parameter is max_report_luns, which is 511 */ #define MPTSAS_MAX_LUN (16895) static int max_lun = MPTSAS_MAX_LUN; module_param(max_lun, int, 0); @@ -420,12 +420,14 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle) } /** - * mptsas_find_portinfo_by_sas_address - + * mptsas_find_portinfo_by_sas_address - find and return portinfo for + * this sas_address * @ioc: Pointer to MPT_ADAPTER structure - * @handle: + * @sas_address: expander sas address * - * This function should be called with the sas_topology_mutex already held + * This function should be called with the sas_topology_mutex already held. * + * Return: %NULL if not found. **/ static struct mptsas_portinfo * mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) @@ -567,12 +569,14 @@ starget) } /** - * mptsas_add_device_component - + * mptsas_add_device_component - adds a new device component to our lists * @ioc: Pointer to MPT_ADAPTER structure - * @channel: fw mapped id's - * @id: - * @sas_address: - * @device_info: + * @channel: channel number + * @id: Logical Target ID for reset (if appropriate) + * @sas_address: expander sas address + * @device_info: specific bits (flags) for devices + * @slot: enclosure slot ID + * @enclosure_logical_id: enclosure WWN * **/ static void @@ -634,10 +638,10 @@ mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id, } /** - * mptsas_add_device_component_by_fw - + * mptsas_add_device_component_by_fw - adds a new device component by FW ID * @ioc: Pointer to MPT_ADAPTER structure - * @channel: fw mapped id's - * @id: + * @channel: channel number + * @id: Logical Target ID * **/ static void @@ -668,8 +672,7 @@ mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id) /** * mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list * @ioc: Pointer to MPT_ADAPTER structure - * @channel: fw mapped id's - * @id: + * @starget: SCSI target for this SCSI device * **/ static void @@ -771,9 +774,9 @@ mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc, } /** - * mptsas_add_device_component_starget - + * mptsas_add_device_component_starget - adds a SCSI target device component * @ioc: Pointer to MPT_ADAPTER structure - * @starget: + * @starget: SCSI target for this SCSI device * **/ static void @@ -806,7 +809,7 @@ mptsas_add_device_component_starget(MPT_ADAPTER *ioc, * mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached * @ioc: Pointer to MPT_ADAPTER structure * @channel: os mapped id's - * @id: + * @id: Logical Target ID * **/ static void @@ -978,11 +981,12 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) } /** - * csmisas_find_vtarget + * mptsas_find_vtarget - find a virtual target device (FC LUN device or + * SCSI target device) * - * @ioc - * @volume_id - * @volume_bus + * @ioc: Pointer to MPT_ADAPTER structure + * @channel: channel number + * @id: Logical Target ID * **/ static VirtTarget * @@ -1047,15 +1051,14 @@ mptsas_queue_rescan(MPT_ADAPTER *ioc) /** - * mptsas_target_reset - * - * Issues TARGET_RESET to end device using handshaking method + * mptsas_target_reset - Issues TARGET_RESET to end device using + * handshaking method * - * @ioc - * @channel - * @id + * @ioc: Pointer to MPT_ADAPTER structure + * @channel: channel number + * @id: Logical Target ID for reset * - * Returns (1) success + * Return: (1) success * (0) failure * **/ @@ -1119,15 +1122,15 @@ mptsas_block_io_starget(struct scsi_target *starget) } /** - * mptsas_target_reset_queue + * mptsas_target_reset_queue - queue a target reset * - * Receive request for TARGET_RESET after receiving an firmware + * @ioc: Pointer to MPT_ADAPTER structure + * @sas_event_data: SAS Device Status Change Event data + * + * Receive request for TARGET_RESET after receiving a firmware * event NOT_RESPONDING_EVENT, then put command in link list * and queue if task_queue already in use. * - * @ioc - * @sas_event_data - * **/ static void mptsas_target_reset_queue(MPT_ADAPTER *ioc, @@ -1207,9 +1210,11 @@ mptsas_schedule_target_reset(void *iocp) /** * mptsas_taskmgmt_complete - complete SAS task management function * @ioc: Pointer to MPT_ADAPTER structure + * @mf: MPT message frame + * @mr: SCSI Task Management Reply structure ptr (may be %NULL) * * Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work - * queue to finish off removing device from upper layers. then send next + * queue to finish off removing device from upper layers, then send next * TARGET_RESET in the queue. **/ static int @@ -1300,10 +1305,10 @@ mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) } /** - * mptscsih_ioc_reset + * mptsas_ioc_reset - issue an IOC reset for this reset phase * - * @ioc - * @reset_phase + * @ioc: Pointer to MPT_ADAPTER structure + * @reset_phase: id of phase of reset * **/ static int @@ -1350,7 +1355,7 @@ mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) /** - * enum device_state - + * enum device_state - TUR device state * @DEVICE_RETRY: need to retry the TUR * @DEVICE_ERROR: TUR return error, don't add device * @DEVICE_READY: device can be added @@ -1941,7 +1946,7 @@ mptsas_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt) } /** - * mptsas_mptsas_eh_timed_out - resets the scsi_cmnd timeout + * mptsas_eh_timed_out - resets the scsi_cmnd timeout * if the device under question is currently in the * device removal delay. * @sc: scsi command that the midlayer is about to time out @@ -2839,14 +2844,15 @@ struct rep_manu_reply{ }; /** - * mptsas_exp_repmanufacture_info - + * mptsas_exp_repmanufacture_info - sets expander manufacturer info * @ioc: per adapter object * @sas_address: expander sas address * @edev: the sas_expander_device object * - * Fills in the sas_expander_device object when SMP port is created. + * For an edge expander or a fanout expander: + * fills in the sas_expander_device object when SMP port is created. * - * Returns 0 for success, non-zero for failure. + * Return: 0 for success, non-zero for failure. */ static int mptsas_exp_repmanufacture_info(MPT_ADAPTER *ioc, @@ -3284,7 +3290,7 @@ static int mptsas_probe_one_phy(struct device *dev, rphy_to_expander_device(rphy)); } - /* If the device exists,verify it wasn't previously flagged + /* If the device exists, verify it wasn't previously flagged as a missing device. If so, clear it */ vtarget = mptsas_find_vtarget(ioc, phy_info->attached.channel, @@ -3611,8 +3617,7 @@ static void mptsas_expander_delete(MPT_ADAPTER *ioc, /** * mptsas_send_expander_event - expanders events - * @ioc: Pointer to MPT_ADAPTER structure - * @expander_data: event data + * @fw_event: event data * * * This function handles adding, removing, and refreshing @@ -3657,9 +3662,9 @@ mptsas_send_expander_event(struct fw_event_work *fw_event) /** - * mptsas_expander_add - + * mptsas_expander_add - adds a newly discovered expander * @ioc: Pointer to MPT_ADAPTER structure - * @handle: + * @handle: device handle * */ static struct mptsas_portinfo * @@ -4000,9 +4005,9 @@ mptsas_probe_devices(MPT_ADAPTER *ioc) } /** - * mptsas_scan_sas_topology - + * mptsas_scan_sas_topology - scans new SAS topology + * (part of probe or rescan) * @ioc: Pointer to MPT_ADAPTER structure - * @sas_address: * **/ static void @@ -4150,11 +4155,12 @@ mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) } /** - * mptsas_find_phyinfo_by_phys_disk_num - + * mptsas_find_phyinfo_by_phys_disk_num - find phyinfo for the + * specified @phys_disk_num * @ioc: Pointer to MPT_ADAPTER structure - * @phys_disk_num: - * @channel: - * @id: + * @phys_disk_num: (hot plug) physical disk number (for RAID support) + * @channel: channel number + * @id: Logical Target ID * **/ static struct mptsas_phyinfo * @@ -4773,8 +4779,9 @@ mptsas_send_raid_event(struct fw_event_work *fw_event) * @lun: Logical unit for reset (if appropriate) * @task_context: Context for the task to be aborted * @timeout: timeout for task management control + * @issue_reset: set to 1 on return if reset is needed, else 0 * - * return 0 on success and -1 on failure: + * Return: 0 on success or -1 on failure. * */ static int @@ -4847,9 +4854,9 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun, /** * mptsas_broadcast_primitive_work - Handle broadcast primitives - * @work: work queue payload containing info describing the event + * @fw_event: work queue payload containing info describing the event * - * this will be handled in workqueue context. + * This will be handled in workqueue context. */ static void mptsas_broadcast_primitive_work(struct fw_event_work *fw_event) |