summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/pci/controller/dwc/pci-imx6.c10
-rw-r--r--drivers/pci/controller/dwc/pci-layerscape.c2
-rw-r--r--drivers/pci/controller/dwc/pcie-designware-ep.c1
-rw-r--r--drivers/pci/pci.c24
4 files changed, 13 insertions, 24 deletions
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 2cbef2d7c207..88af6bff945f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -81,8 +81,6 @@ struct imx6_pcie {
#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4)
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
#define PCIE_PHY_CTRL_DATA_LOC 0
@@ -711,12 +709,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
return 0;
}
-static int imx6_pcie_link_up(struct dw_pcie *pci)
-{
- return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) &
- PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
-}
-
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
.host_init = imx6_pcie_host_init,
};
@@ -749,7 +741,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
}
static const struct dw_pcie_ops dw_pcie_ops = {
- .link_up = imx6_pcie_link_up,
+ /* No special ops needed, but pcie-designware still expects this struct */
};
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 3724d3ef7008..7aa9a82b7ebd 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -88,7 +88,7 @@ static void ls_pcie_disable_outbound_atus(struct ls_pcie *pcie)
int i;
for (i = 0; i < PCIE_IATU_NUM; i++)
- dw_pcie_disable_atu(pcie->pci, DW_PCIE_REGION_OUTBOUND, i);
+ dw_pcie_disable_atu(pcie->pci, i, DW_PCIE_REGION_OUTBOUND);
}
static int ls1021_pcie_link_up(struct dw_pcie *pci)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 1e7b02221eac..de8635af4cde 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -440,7 +440,6 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
tbl_offset = dw_pcie_readl_dbi(pci, reg);
bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
tbl_offset &= PCI_MSIX_TABLE_OFFSET;
- tbl_offset >>= 3;
reg = PCI_BASE_ADDRESS_0 + (4 * bir);
bar_addr_upper = 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d068f11d08a7..c9d8e3c837de 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5556,9 +5556,13 @@ enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev)
u32 lnkcap2, lnkcap;
/*
- * PCIe r4.0 sec 7.5.3.18 recommends using the Supported Link
- * Speeds Vector in Link Capabilities 2 when supported, falling
- * back to Max Link Speed in Link Capabilities otherwise.
+ * Link Capabilities 2 was added in PCIe r3.0, sec 7.8.18. The
+ * implementation note there recommends using the Supported Link
+ * Speeds Vector in Link Capabilities 2 when supported.
+ *
+ * Without Link Capabilities 2, i.e., prior to PCIe r3.0, software
+ * should use the Supported Link Speeds field in Link Capabilities,
+ * where only 2.5 GT/s and 5.0 GT/s speeds were defined.
*/
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2);
if (lnkcap2) { /* PCIe r3.0-compliant */
@@ -5574,16 +5578,10 @@ enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev)
}
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap);
- if (lnkcap) {
- if (lnkcap & PCI_EXP_LNKCAP_SLS_16_0GB)
- return PCIE_SPEED_16_0GT;
- else if (lnkcap & PCI_EXP_LNKCAP_SLS_8_0GB)
- return PCIE_SPEED_8_0GT;
- else if (lnkcap & PCI_EXP_LNKCAP_SLS_5_0GB)
- return PCIE_SPEED_5_0GT;
- else if (lnkcap & PCI_EXP_LNKCAP_SLS_2_5GB)
- return PCIE_SPEED_2_5GT;
- }
+ if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_5_0GB)
+ return PCIE_SPEED_5_0GT;
+ else if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_2_5GB)
+ return PCIE_SPEED_2_5GT;
return PCI_SPEED_UNKNOWN;
}