summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bma180.txt7
-rw-r--r--drivers/iio/accel/Kconfig4
-rw-r--r--drivers/iio/accel/bma180.c108
3 files changed, 100 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index 3b25b4c4d446..f53237270b32 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -1,11 +1,14 @@
-* Bosch BMA180 / BMA250 triaxial acceleration sensor
+* Bosch BMA180 / BMA25x triaxial acceleration sensor
http://omapworld.com/BMA180_111_1002839.pdf
http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
Required properties:
- - compatible : should be "bosch,bma180" or "bosch,bma250"
+ - compatible : should be one of:
+ "bosch,bma180"
+ "bosch,bma250"
+ "bosch,bma254"
- reg : the I2C address of the sensor
Optional properties:
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 670e60568033..5d91a6dda894 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -89,13 +89,13 @@ config ADXL372_I2C
module will be called adxl372_i2c.
config BMA180
- tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
+ tristate "Bosch BMA180/BMA25x 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Bosch BMA180 or
- BMA250 triaxial acceleration sensor.
+ BMA25x triaxial acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma180.
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 45dd096c0220..fcd91d5f05fd 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -9,6 +9,7 @@
* SPI is not supported by driver
* BMA180: 7-bit I2C slave address 0x40 or 0x41
* BMA250: 7-bit I2C slave address 0x18 or 0x19
+ * BMA254: 7-bit I2C slave address 0x18 or 0x19
*/
#include <linux/module.h>
@@ -34,17 +35,20 @@
enum chip_ids {
BMA180,
BMA250,
+ BMA254,
};
struct bma180_data;
struct bma180_part_info {
+ u8 chip_id;
const struct iio_chan_spec *channels;
unsigned int num_channels;
const int *scale_table;
unsigned int num_scales;
const int *bw_table;
unsigned int num_bw;
+ int center_temp;
u8 int_reset_reg, int_reset_mask;
u8 sleep_reg, sleep_mask;
@@ -52,6 +56,7 @@ struct bma180_part_info {
u8 scale_reg, scale_mask;
u8 power_reg, power_mask, lowpower_val;
u8 int_enable_reg, int_enable_mask;
+ u8 int_map_reg, int_enable_dataready_int1_mask;
u8 softreset_reg;
int (*chip_config)(struct bma180_data *data);
@@ -90,6 +95,8 @@ struct bma180_part_info {
#define BMA180_RESET_VAL 0xb6
#define BMA180_ID_REG_VAL 0x03
+#define BMA250_ID_REG_VAL 0x03
+#define BMA254_ID_REG_VAL 0xfa /* 250 decimal */
/* Chip power modes */
#define BMA180_LOW_POWER 0x03
@@ -110,6 +117,23 @@ struct bma180_part_info {
#define BMA250_INT1_DATA_MASK BIT(0)
#define BMA250_INT_RESET_MASK BIT(7) /* Reset pending interrupts */
+#define BMA254_RANGE_REG 0x0f
+#define BMA254_BW_REG 0x10
+#define BMA254_POWER_REG 0x11
+#define BMA254_RESET_REG 0x14
+#define BMA254_INT_ENABLE_REG 0x17
+#define BMA254_INT_MAP_REG 0x1a
+#define BMA254_INT_RESET_REG 0x21
+
+#define BMA254_RANGE_MASK GENMASK(3, 0) /* Range of accel values */
+#define BMA254_BW_MASK GENMASK(4, 0) /* Accel bandwidth */
+#define BMA254_SUSPEND_MASK BIT(7) /* chip will sleep */
+#define BMA254_LOWPOWER_MASK BIT(6)
+#define BMA254_DATA_INTEN_MASK BIT(4)
+#define BMA254_INT2_DATA_MASK BIT(7)
+#define BMA254_INT1_DATA_MASK BIT(0)
+#define BMA254_INT_RESET_MASK BIT(7) /* Reset pending interrupts */
+
struct bma180_data {
struct regulator *vdd_supply;
struct regulator *vddio_supply;
@@ -135,8 +159,8 @@ enum bma180_chan {
static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
-static int bma250_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
-static int bma250_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
+static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
+static int bma25x_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
0, 0, 306458 };
static int bma180_get_data_reg(struct bma180_data *data, enum bma180_chan chan)
@@ -310,8 +334,11 @@ static int bma180_chip_init(struct bma180_data *data)
if (ret < 0)
return ret;
- if (ret != BMA180_ID_REG_VAL)
+ if (ret != data->part_info->chip_id) {
+ dev_err(&data->client->dev, "wrong chip ID %d expected %d\n",
+ ret, data->part_info->chip_id);
return -ENODEV;
+ }
ret = bma180_soft_reset(data);
if (ret)
@@ -358,7 +385,7 @@ err:
return ret;
}
-static int bma250_chip_config(struct bma180_data *data)
+static int bma25x_chip_config(struct bma180_data *data)
{
int ret = bma180_chip_init(data);
@@ -370,8 +397,12 @@ static int bma250_chip_config(struct bma180_data *data)
ret = bma180_set_scale(data, 38344); /* 2 G */
if (ret)
goto err;
- ret = bma180_set_bits(data, BMA250_INT_MAP_REG,
- BMA250_INT1_DATA_MASK, 1);
+ /*
+ * This enables dataready interrupt on the INT1 pin
+ * FIXME: support using the INT2 pin
+ */
+ ret = bma180_set_bits(data, data->part_info->int_map_reg,
+ data->part_info->int_enable_dataready_int1_mask, 1);
if (ret)
goto err;
@@ -397,7 +428,7 @@ err:
dev_err(&data->client->dev, "failed to disable the chip\n");
}
-static void bma250_chip_disable(struct bma180_data *data)
+static void bma25x_chip_disable(struct bma180_data *data)
{
if (bma180_set_new_data_intr_state(data, false))
goto err;
@@ -500,7 +531,7 @@ static int bma180_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
- *val = 48; /* 0 LSB @ 24 degree C */
+ *val = data->part_info->center_temp;
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -630,14 +661,24 @@ static const struct iio_chan_spec bma250_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(4),
};
+static const struct iio_chan_spec bma254_channels[] = {
+ BMA180_ACC_CHANNEL(X, 12),
+ BMA180_ACC_CHANNEL(Y, 12),
+ BMA180_ACC_CHANNEL(Z, 12),
+ BMA180_TEMP_CHANNEL,
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
static const struct bma180_part_info bma180_part_info[] = {
[BMA180] = {
+ .chip_id = BMA180_ID_REG_VAL,
.channels = bma180_channels,
.num_channels = ARRAY_SIZE(bma180_channels),
.scale_table = bma180_scale_table,
.num_scales = ARRAY_SIZE(bma180_scale_table),
.bw_table = bma180_bw_table,
.num_bw = ARRAY_SIZE(bma180_bw_table),
+ .center_temp = 48, /* 0 LSB @ 24 degree C */
.int_reset_reg = BMA180_CTRL_REG0,
.int_reset_mask = BMA180_RESET_INT,
.sleep_reg = BMA180_CTRL_REG0,
@@ -656,12 +697,14 @@ static const struct bma180_part_info bma180_part_info[] = {
.chip_disable = bma180_chip_disable,
},
[BMA250] = {
+ .chip_id = BMA250_ID_REG_VAL,
.channels = bma250_channels,
.num_channels = ARRAY_SIZE(bma250_channels),
- .scale_table = bma250_scale_table,
- .num_scales = ARRAY_SIZE(bma250_scale_table),
- .bw_table = bma250_bw_table,
- .num_bw = ARRAY_SIZE(bma250_bw_table),
+ .scale_table = bma25x_scale_table,
+ .num_scales = ARRAY_SIZE(bma25x_scale_table),
+ .bw_table = bma25x_bw_table,
+ .num_bw = ARRAY_SIZE(bma25x_bw_table),
+ .center_temp = 48, /* 0 LSB @ 24 degree C */
.int_reset_reg = BMA250_INT_RESET_REG,
.int_reset_mask = BMA250_INT_RESET_MASK,
.sleep_reg = BMA250_POWER_REG,
@@ -675,9 +718,39 @@ static const struct bma180_part_info bma180_part_info[] = {
.lowpower_val = 1,
.int_enable_reg = BMA250_INT_ENABLE_REG,
.int_enable_mask = BMA250_DATA_INTEN_MASK,
+ .int_map_reg = BMA250_INT_MAP_REG,
+ .int_enable_dataready_int1_mask = BMA250_INT1_DATA_MASK,
.softreset_reg = BMA250_RESET_REG,
- .chip_config = bma250_chip_config,
- .chip_disable = bma250_chip_disable,
+ .chip_config = bma25x_chip_config,
+ .chip_disable = bma25x_chip_disable,
+ },
+ [BMA254] = {
+ .chip_id = BMA254_ID_REG_VAL,
+ .channels = bma254_channels,
+ .num_channels = ARRAY_SIZE(bma254_channels),
+ .scale_table = bma25x_scale_table,
+ .num_scales = ARRAY_SIZE(bma25x_scale_table),
+ .bw_table = bma25x_bw_table,
+ .num_bw = ARRAY_SIZE(bma25x_bw_table),
+ .center_temp = 46, /* 0 LSB @ 23 degree C */
+ .int_reset_reg = BMA254_INT_RESET_REG,
+ .int_reset_mask = BMA254_INT_RESET_MASK,
+ .sleep_reg = BMA254_POWER_REG,
+ .sleep_mask = BMA254_SUSPEND_MASK,
+ .bw_reg = BMA254_BW_REG,
+ .bw_mask = BMA254_BW_MASK,
+ .scale_reg = BMA254_RANGE_REG,
+ .scale_mask = BMA254_RANGE_MASK,
+ .power_reg = BMA254_POWER_REG,
+ .power_mask = BMA254_LOWPOWER_MASK,
+ .lowpower_val = 1,
+ .int_enable_reg = BMA254_INT_ENABLE_REG,
+ .int_enable_mask = BMA254_DATA_INTEN_MASK,
+ .int_map_reg = BMA254_INT_MAP_REG,
+ .int_enable_dataready_int1_mask = BMA254_INT1_DATA_MASK,
+ .softreset_reg = BMA254_RESET_REG,
+ .chip_config = bma25x_chip_config,
+ .chip_disable = bma25x_chip_disable,
},
};
@@ -919,6 +992,7 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
static const struct i2c_device_id bma180_ids[] = {
{ "bma180", BMA180 },
{ "bma250", BMA250 },
+ { "bma254", BMA254 },
{ }
};
@@ -933,6 +1007,10 @@ static const struct of_device_id bma180_of_match[] = {
.compatible = "bosch,bma250",
.data = (void *)BMA250
},
+ {
+ .compatible = "bosch,bma254",
+ .data = (void *)BMA254
+ },
{ }
};
MODULE_DEVICE_TABLE(of, bma180_of_match);
@@ -952,5 +1030,5 @@ module_i2c_driver(bma180_driver);
MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@ti.com>");
MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("Bosch BMA180/BMA250 triaxial acceleration sensor");
+MODULE_DESCRIPTION("Bosch BMA180/BMA25x triaxial acceleration sensor");
MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 01:51:06 +0000