diff options
| -rw-r--r-- | arch/arc/plat-arcfpga/Kconfig | 32 | ||||
| -rw-r--r-- | arch/arc/plat-arcfpga/platform.c | 55 |
2 files changed, 0 insertions, 87 deletions
diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig index 33058aa40e77..e27bb5cc3c1e 100644 --- a/arch/arc/plat-arcfpga/Kconfig +++ b/arch/arc/plat-arcfpga/Kconfig @@ -48,36 +48,4 @@ config ARC_SERIAL_BAUD help Baud rate for the ARC UART -menuconfig ARC_HAS_BVCI_LAT_UNIT - bool "BVCI Bus Latency Unit" - depends on ARC_BOARD_ML509 || ARC_BOARD_ANGEL4 - help - IP to add artificial latency to BVCI Bus Based FPGA builds. - The default latency (even worst case) for FPGA is non-realistic - (~10 SDRAM, ~5 SSRAM). - -config BVCI_LAT_UNITS - hex "Latency Unit(s) Bitmap" - default "0x0" - depends on ARC_HAS_BVCI_LAT_UNIT - help - There are multiple Latency Units corresponding to the many - interfaces of the system bus arbiter (both CPU side as well as - the peripheral side). - To add latency to ALL memory transaction, choose Unit 0, otherwise - for finer grainer - interface wise latency, specify a bitmap (1 bit - per unit) of all units. e.g. 1,2,12 will be 0x1003 - - Unit 0 - System Arb and Mem Controller - Unit 1 - I$ and System Bus - Unit 2 - D$ and System Bus - .. - Unit 12 - IDE Disk controller and System Bus - -config BVCI_LAT_CYCLES - int "Latency Value in cycles" - range 0 63 - default "30" - depends on ARC_HAS_BVCI_LAT_UNIT - endif diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 213394a15cd2..f09e771b4bbd 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -22,59 +22,6 @@ #include <plat/smp.h> #include <plat/irq.h> -/*-----------------------BVCI Latency Unit -----------------------------*/ - -#ifdef CONFIG_ARC_HAS_BVCI_LAT_UNIT - -int lat_cycles = CONFIG_BVCI_LAT_CYCLES; - -/* BVCI Bus Profiler: Latency Unit */ -static void __init setup_bvci_lat_unit(void) -{ -#define MAX_BVCI_UNITS 12 - - unsigned int i; - unsigned int *base = (unsigned int *)BVCI_LAT_UNIT_BASE; - const unsigned long units_req = CONFIG_BVCI_LAT_UNITS; - const unsigned int REG_UNIT = 21; - const unsigned int REG_VAL = 22; - - /* - * There are multiple Latency Units corresponding to the many - * interfaces of the system bus arbiter (both CPU side as well as - * the peripheral side). - * - * Unit 0 - System Arb and Mem Controller - adds latency to all - * memory trasactions - * Unit 1 - I$ and System Bus - * Unit 2 - D$ and System Bus - * .. - * Unit 12 - IDE Disk controller and System Bus - * - * The programmers model requires writing to lat_unit reg first - * and then the latency value (cycles) to lat_value reg - */ - - if (CONFIG_BVCI_LAT_UNITS == 0) { - writel(0, base + REG_UNIT); - writel(lat_cycles, base + REG_VAL); - pr_info("BVCI Latency for all Memory Transactions %d cycles\n", - lat_cycles); - } else { - for_each_set_bit(i, &units_req, MAX_BVCI_UNITS) { - writel(i + 1, base + REG_UNIT); /* loop is 0 based */ - writel(lat_cycles, base + REG_VAL); - pr_info("BVCI Latency for Unit[%d] = %d cycles\n", - (i + 1), lat_cycles); - } - } -} -#else -static void __init setup_bvci_lat_unit(void) -{ -} -#endif - /*----------------------- Platform Devices -----------------------------*/ #if IS_ENABLED(CONFIG_SERIAL_ARC) @@ -165,8 +112,6 @@ static void __init plat_fpga_early_init(void) { pr_info("[plat-arcfpga]: registering early dev resources\n"); - setup_bvci_lat_unit(); - arc_fpga_serial_init(); #ifdef CONFIG_ISS_SMP_EXTN |