diff options
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_ddi.c | 21 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_dp.c | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_hdmi.c | 28 |
3 files changed, 55 insertions, 1 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index c89d0c7543dc..18bc0f2690c9 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -4075,6 +4075,7 @@ intel_ddi_hotplug(struct intel_encoder *encoder, struct intel_connector *connector, bool irq_received) { + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); struct drm_modeset_acquire_ctx ctx; enum intel_hotplug_state state; int ret; @@ -4101,6 +4102,26 @@ intel_ddi_hotplug(struct intel_encoder *encoder, drm_modeset_acquire_fini(&ctx); WARN(ret, "Acquiring modeset locks failed with %i\n", ret); + /* + * Unpowered type-c dongles can take some time to boot and be + * responsible, so here giving some time to those dongles to power up + * and then retrying the probe. + * + * On many platforms the HDMI live state signal is known to be + * unreliable, so we can't use it to detect if a sink is connected or + * not. Instead we detect if it's connected based on whether we can + * read the EDID or not. That in turn has a problem during disconnect, + * since the HPD interrupt may be raised before the DDC lines get + * disconnected (due to how the required length of DDC vs. HPD + * connector pins are specified) and so we'll still be able to get a + * valid EDID. To solve this schedule another detection cycle if this + * time around we didn't detect any change in the sink's connection + * status. + */ + if (state == INTEL_HOTPLUG_UNCHANGED && irq_received && + !dig_port->dp.is_mst) + state = INTEL_HOTPLUG_RETRY; + return state; } diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 14c191d9c147..0eb5d66f87a7 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -4891,6 +4891,13 @@ intel_dp_hotplug(struct intel_encoder *encoder, drm_modeset_acquire_fini(&ctx); WARN(ret, "Acquiring modeset locks failed with %i\n", ret); + /* + * Keeping it consistent with intel_ddi_hotplug() and + * intel_hdmi_hotplug(). + */ + if (state == INTEL_HOTPLUG_UNCHANGED && irq_received) + state = INTEL_HOTPLUG_RETRY; + return state; } diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index 098ea2c5d831..9bf28de10401 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -3126,6 +3126,32 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, DRM_DEBUG_KMS("CEC notifier get failed\n"); } +static enum intel_hotplug_state +intel_hdmi_hotplug(struct intel_encoder *encoder, + struct intel_connector *connector, bool irq_received) +{ + enum intel_hotplug_state state; + + state = intel_encoder_hotplug(encoder, connector, irq_received); + + /* + * On many platforms the HDMI live state signal is known to be + * unreliable, so we can't use it to detect if a sink is connected or + * not. Instead we detect if it's connected based on whether we can + * read the EDID or not. That in turn has a problem during disconnect, + * since the HPD interrupt may be raised before the DDC lines get + * disconnected (due to how the required length of DDC vs. HPD + * connector pins are specified) and so we'll still be able to get a + * valid EDID. To solve this schedule another detection cycle if this + * time around we didn't detect any change in the sink's connection + * status. + */ + if (state == INTEL_HOTPLUG_UNCHANGED && irq_received) + state = INTEL_HOTPLUG_RETRY; + + return state; +} + void intel_hdmi_init(struct drm_i915_private *dev_priv, i915_reg_t hdmi_reg, enum port port) { @@ -3149,7 +3175,7 @@ void intel_hdmi_init(struct drm_i915_private *dev_priv, &intel_hdmi_enc_funcs, DRM_MODE_ENCODER_TMDS, "HDMI %c", port_name(port)); - intel_encoder->hotplug = intel_encoder_hotplug; + intel_encoder->hotplug = intel_hdmi_hotplug; intel_encoder->compute_config = intel_hdmi_compute_config; if (HAS_PCH_SPLIT(dev_priv)) { intel_encoder->disable = pch_disable_hdmi; |