diff options
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 103 |
3 files changed, 94 insertions, 15 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 35b8c88c3220..738ed689ff69 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -400,7 +400,7 @@ }; pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; reg = <0x0 0x00550 0x0 0x10>; #pwm-cells = <3>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 72c5a9f64ca8..94567eb17875 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -109,8 +109,8 @@ status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; + clocks = <&xtal> , <&xtal>; + clock-names = "clkin0", "clkin1" ; }; &pwm_ef { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 890821d6e52b..266fbcf3e47f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -10,12 +10,20 @@ #include <dt-bindings/input/input.h> -#include "meson-gxl-s905x-p212.dtsi" +#include "meson-gxl-s905x.dtsi" / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Technology CC"; + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -26,6 +34,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -53,6 +66,39 @@ linux,default-trigger = "heartbeat"; }; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-gpio"; + + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cvbs_vdac_port { @@ -61,6 +107,16 @@ }; }; +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -73,20 +129,43 @@ }; }; -/* - * The following devices exists but are exposed on the general - * purpose GPIO header. End user may well decide to use those pins - * for another purpose - */ +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; -&sd_emmc_a { - status = "disabled"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_card>; }; -&uart_A { - status = "disabled"; +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <50000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; }; -&wifi32k { - status = "disabled"; +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; |