summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c43
-rw-r--r--drivers/mtd/devices/elm.c2
-rw-r--r--drivers/mtd/nand/nand_base.c6
3 files changed, 49 insertions, 2 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e4ec355704a6..a7543ba3e190 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -52,6 +52,11 @@
/* Atmel chips */
#define AT49BV640D 0x02de
#define AT49BV640DT 0x02db
+/* Sharp chips */
+#define LH28F640BFHE_PTTL90 0x00b0
+#define LH28F640BFHE_PBTL90 0x00b1
+#define LH28F640BFHE_PTTL70A 0x00b2
+#define LH28F640BFHE_PBTL70A 0x00b3
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -258,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
};
+static int is_LH28F640BF(struct cfi_private *cfi)
+{
+ /* Sharp LH28F640BF Family */
+ if (cfi->mfr == CFI_MFR_SHARP && (
+ cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
+ cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
+ return 1;
+ return 0;
+}
+
+static void fixup_LH28F640BF(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+ /* Reset the Partition Configuration Register on LH28F640BF
+ * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
+ if (is_LH28F640BF(cfi)) {
+ printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
+ map_write(map, CMD(0x60), 0);
+ map_write(map, CMD(0x04), 0);
+
+ /* We have set one single partition thus
+ * Simultaneous Operations are not allowed */
+ printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
+ extp->FeatureSupport &= ~512;
+ }
+}
+
static void fixup_use_point(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -309,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
{ 0, 0, NULL }
};
@@ -1649,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
initial_adr = adr;
cmd_adr = adr & ~(wbufsize-1);
+ /* Sharp LH28F640BF chips need the first address for the
+ * Page Buffer Program command. See Table 5 of
+ * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+ if (is_LH28F640BF(cfi))
+ cmd_adr = adr;
+
/* Let's determine this according to the interleave only once */
write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index 7df86948e6d4..b4f61c7fc161 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -475,6 +475,7 @@ static int elm_context_save(struct elm_info *info)
ELM_SYNDROME_FRAGMENT_1 + offset);
regs->elm_syndrome_fragment_0[i] = elm_read_reg(info,
ELM_SYNDROME_FRAGMENT_0 + offset);
+ break;
default:
return -EINVAL;
}
@@ -520,6 +521,7 @@ static int elm_context_restore(struct elm_info *info)
regs->elm_syndrome_fragment_1[i]);
elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset,
regs->elm_syndrome_fragment_0[i]);
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 41167e9e991e..4f3e80c68a26 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4047,8 +4047,10 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->layout->oobavail += ecc->layout->oobfree[i].length;
mtd->oobavail = ecc->layout->oobavail;
- /* ECC sanity check: warn noisily if it's too weak */
- WARN_ON(!nand_ecc_strength_good(mtd));
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
/*
* Set the number of read / write steps for one page depending on ECC