summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt29
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt39
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt36
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-pxa2xx.txt24
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rspi.txt4
-rw-r--r--Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt32
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sprd.txt26
-rw-r--r--Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt44
-rw-r--r--MAINTAINERS9
-rw-r--r--drivers/soc/qcom/qcom-geni-se.c41
-rw-r--r--drivers/spi/Kconfig45
-rw-r--r--drivers/spi/Makefile5
-rw-r--r--drivers/spi/spi-atmel.c10
-rw-r--r--drivers/spi/spi-bcm-qspi.c4
-rw-r--r--drivers/spi/spi-bcm63xx-hsspi.c20
-rw-r--r--drivers/spi/spi-davinci.c19
-rw-r--r--drivers/spi/spi-dw-mmio.c38
-rw-r--r--drivers/spi/spi-dw.c28
-rw-r--r--drivers/spi/spi-dw.h2
-rw-r--r--drivers/spi/spi-ep93xx.c36
-rw-r--r--drivers/spi/spi-fsl-espi.c4
-rw-r--r--drivers/spi/spi-fsl-lpspi.c2
-rw-r--r--drivers/spi/spi-geni-qcom.c703
-rw-r--r--drivers/spi/spi-gpio.c12
-rw-r--r--drivers/spi/spi-imx.c53
-rw-r--r--drivers/spi/spi-mem.c69
-rw-r--r--drivers/spi/spi-mt65xx.c37
-rw-r--r--drivers/spi/spi-omap2-mcspi.c177
-rw-r--r--drivers/spi/spi-orion.c22
-rw-r--r--drivers/spi/spi-pic32-sqi.c4
-rw-r--r--drivers/spi/spi-pic32.c6
-rw-r--r--drivers/spi/spi-pl022.c10
-rw-r--r--drivers/spi/spi-pxa2xx.c100
-rw-r--r--drivers/spi/spi-qcom-qspi.c581
-rw-r--r--drivers/spi/spi-rb4xx.c2
-rw-r--r--drivers/spi/spi-rockchip.c62
-rw-r--r--drivers/spi/spi-rspi.c10
-rw-r--r--drivers/spi/spi-sh-hspi.c12
-rw-r--r--drivers/spi/spi-sh-msiof.c10
-rw-r--r--drivers/spi/spi-sh.c12
-rw-r--r--drivers/spi/spi-slave-mt27xx.c554
-rw-r--r--drivers/spi/spi-slave-system-control.c1
-rw-r--r--drivers/spi/spi-sprd.c745
-rw-r--r--drivers/spi/spi-stm32-qspi.c512
-rw-r--r--drivers/spi/spi.c106
-rw-r--r--drivers/spi/spidev.c9
-rw-r--r--include/linux/pci.h4
-rw-r--r--include/linux/platform_data/spi-davinci.h4
-rw-r--r--include/linux/pxa2xx_ssp.h3
-rw-r--r--include/linux/qcom-geni-se.h13
-rw-r--r--include/linux/spi/spi.h36
-rw-r--r--tools/spi/spidev_test.c6
55 files changed, 3979 insertions, 404 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index ff92e5a41bed..dab7ca9f250c 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -53,20 +53,8 @@ Required properties:
- clocks: Serial engine core clock needed by the device.
Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
-
-Required properties:
-- compatible: Must contain "qcom,geni-spi".
-- reg: Must contain SPI register location and length.
-- interrupts: Must contain SPI controller interrupts.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-- spi-max-frequency: Specifies maximum SPI clock frequency, units - Hz.
-- #address-cells: Must be <1> to define a chip select address on
- the SPI bus.
-- #size-cells: Must be <0>.
-
-SPI slave nodes must be children of the SPI master node and conform to SPI bus
-binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+node binding is described in
+Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
Example:
geniqup@8c0000 {
@@ -103,17 +91,4 @@ Example:
pinctrl-1 = <&qup_1_uart_3_sleep>;
};
- spi0: spi@a84000 {
- compatible = "qcom,geni-spi";
- reg = <0xa84000 0x4000>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_spi_2_active>;
- pinctrl-1 = <&qup_1_spi_2_sleep>;
- spi-max-frequency = <19200000>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
}
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
new file mode 100644
index 000000000000..790311a42bf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
@@ -0,0 +1,39 @@
+GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP v3 core is a GENI based AHB slave that provides a common data path
+(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+mini-core.
+
+SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+data path from 4 bits to 32 bits and numerous protocol variants.
+
+Required properties:
+- compatible: Must contain "qcom,geni-spi".
+- reg: Must contain SPI register location and length.
+- interrupts: Must contain SPI controller interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- #address-cells: Must be <1> to define a chip select address on
+ the SPI bus.
+- #size-cells: Must be <0>.
+
+SPI Controller nodes must be child of GENI based Qualcomm Universal
+Peripharal. Please refer GENI based QUP wrapper controller node bindings
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+
+SPI slave nodes must be children of the SPI master node and conform to SPI bus
+binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+ spi0: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0xa84000 0x4000>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_spi_2_active>;
+ pinctrl-1 = <&qup_1_spi_2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
new file mode 100644
index 000000000000..1d64b61f5171
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
@@ -0,0 +1,36 @@
+Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+The QSPI controller allows SPI protocol communication in single, dual, or quad
+wire transmission modes for read/write access to slaves such as NOR flash.
+
+Required properties:
+- compatible: An SoC specific identifier followed by "qcom,qspi-v1", such as
+ "qcom,sdm845-qspi", "qcom,qspi-v1"
+- reg: Should contain the base register location and length.
+- interrupts: Interrupt number used by the controller.
+- clocks: Should contain the core and AHB clock.
+- clock-names: Should be "core" for core clock and "iface" for AHB clock.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ qspi: spi@88df000 {
+ compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+ reg = <0x88df000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <&gcc GCC_QSPI_CORE_CLK>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index bfbc2035fb6b..4b836ad17b19 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -2,7 +2,9 @@ Renesas MSIOF spi controller
Required properties:
- compatible : "renesas,msiof-r8a7743" (RZ/G1M)
+ "renesas,msiof-r8a7744" (RZ/G1N)
"renesas,msiof-r8a7745" (RZ/G1E)
+ "renesas,msiof-r8a774a1" (RZ/G2M)
"renesas,msiof-r8a7790" (R-Car H2)
"renesas,msiof-r8a7791" (R-Car M2-W)
"renesas,msiof-r8a7792" (R-Car V2H)
@@ -11,10 +13,14 @@ Required properties:
"renesas,msiof-r8a7795" (R-Car H3)
"renesas,msiof-r8a7796" (R-Car M3-W)
"renesas,msiof-r8a77965" (R-Car M3-N)
+ "renesas,msiof-r8a77970" (R-Car V3M)
+ "renesas,msiof-r8a77980" (R-Car V3H)
+ "renesas,msiof-r8a77990" (R-Car E3)
+ "renesas,msiof-r8a77995" (R-Car D3)
"renesas,msiof-sh73a0" (SH-Mobile AG5)
"renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
"renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device)
- "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+ "renesas,rcar-gen3-msiof" (generic R-Car Gen3 and RZ/G2 compatible device)
"renesas,sh-msiof" (deprecated)
When compatible with the generic version, nodes
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 642d3fb1ef85..2864bc6b659c 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -2,7 +2,7 @@ Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
Required properties:
- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
- "jaguar2"
+ "jaguar2", or "amazon,alpine-dw-apb-ssi"
- reg : The register base for the controller. For "mscc,<soc>-spi", a second
register set is required (named ICPU_CFG:SPI_MST)
- interrupts : One interrupt, used by the controller.
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
index 4af132606b37..8d178a4503cf 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt
@@ -3,6 +3,7 @@
Required properties:
- compatible :
- "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
+ - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc
- reg : address and length of the lpspi master registers
- interrupts : lpspi interrupt
- clocks : lpspi clock specifier
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
new file mode 100644
index 000000000000..0335a9bd2e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
@@ -0,0 +1,24 @@
+PXA2xx SSP SPI Controller
+
+Required properties:
+- compatible: Must be "marvell,mmp2-ssp".
+- reg: Offset and length of the device's register set.
+- interrupts: Should be the interrupt number.
+- clocks: Should contain a single entry describing the clock input.
+- #address-cells: Number of cells required to define a chip select address.
+- #size-cells: Should be zero.
+
+Optional properties:
+- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Child nodes represent devices on the SPI bus
+ See ../spi/spi-bus.txt
+
+Example:
+ ssp1: spi@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
index 96fd58548f69..fc97ad64fbf2 100644
--- a/Documentation/devicetree/bindings/spi/spi-rspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -3,7 +3,7 @@ Device tree configuration for Renesas RSPI/QSPI driver
Required properties:
- compatible : For Renesas Serial Peripheral Interface on legacy SH:
"renesas,rspi-<soctype>", "renesas,rspi" as fallback.
- For Renesas Serial Peripheral Interface on RZ/A1H:
+ For Renesas Serial Peripheral Interface on RZ/A:
"renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
For Quad Serial Peripheral Interface on R-Car Gen2 and
RZ/G1 devices:
@@ -11,7 +11,9 @@ Required properties:
Examples with soctypes are:
- "renesas,rspi-sh7757" (SH)
- "renesas,rspi-r7s72100" (RZ/A1H)
+ - "renesas,rspi-r7s9210" (RZ/A2)
- "renesas,qspi-r8a7743" (RZ/G1M)
+ - "renesas,qspi-r8a7744" (RZ/G1N)
- "renesas,qspi-r8a7745" (RZ/G1E)
- "renesas,qspi-r8a7790" (R-Car H2)
- "renesas,qspi-r8a7791" (R-Car M2-W)
diff --git a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
new file mode 100644
index 000000000000..c37e5a179b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
@@ -0,0 +1,32 @@
+Binding for MTK SPI Slave controller
+
+Required properties:
+- compatible: should be one of the following.
+ - mediatek,mt2712-spi-slave: for mt2712 platforms
+- reg: Address and length of the register set for the device.
+- interrupts: Should contain spi interrupt.
+- clocks: phandles to input clocks.
+ It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>.
+- clock-names: should be "spi" for the clock gate.
+
+Optional properties:
+- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>.
+- assigned-clock-parents: parent of mux clock.
+ It's PLL, and should be one of the following.
+ - <&topckgen CLK_TOP_UNIVPLL1_D2>: specify parent clock 312MHZ.
+ It's the default one.
+ - <&topckgen CLK_TOP_UNIVPLL1_D4>: specify parent clock 156MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+ - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+
+Example:
+- SoC Specific Portion:
+spis1: spi@10013000 {
+ compatible = "mediatek,mt2712-spi-slave";
+ reg = <0 0x10013000 0 0x100>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd.txt b/Documentation/devicetree/bindings/spi/spi-sprd.txt
new file mode 100644
index 000000000000..bad211a19da4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sprd.txt
@@ -0,0 +1,26 @@
+Spreadtrum SPI Controller
+
+Required properties:
+- compatible: Should be "sprd,sc9860-spi".
+- reg: Offset and length of SPI controller register space.
+- interrupts: Should contain SPI interrupt.
+- clock-names: Should contain following entries:
+ "spi" for SPI clock,
+ "source" for SPI source (parent) clock,
+ "enable" for SPI module enable clock.
+- clocks: List of clock input name strings sorted in the same order
+ as the clock-names property.
+- #address-cells: The number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be set to 0.
+
+Example:
+spi0: spi@70a00000{
+ compatible = "sprd,sc9860-spi";
+ reg = <0 0x70a00000 0 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "spi", "source","enable";
+ clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
new file mode 100644
index 000000000000..adeeb63e84b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
@@ -0,0 +1,44 @@
+* STMicroelectronics Quad Serial Peripheral Interface(QSPI)
+
+Required properties:
+- compatible: should be "st,stm32f469-qspi"
+- reg: the first contains the register location and length.
+ the second contains the memory mapping address and length
+- reg-names: should contain the reg names "qspi" "qspi_mm"
+- interrupts: should contain the interrupt for the device
+- clocks: the phandle of the clock needed by the QSPI controller
+- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
+
+Optional properties:
+- resets: must contain the phandle to the reset controller.
+
+A spi flash (NOR/NAND) must be a child of spi node and could have some
+properties. Also see jedec,spi-nor.txt.
+
+Required properties:
+- reg: chip-Select number (QSPI controller may connect 2 flashes)
+- spi-max-frequency: max frequency of spi bus
+
+Optional property:
+- spi-rx-bus-width: see ./spi-bus.txt for the description
+
+Example:
+
+qspi: spi@a0001000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <91>;
+ resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
+ clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ ...
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index c742c517f95c..40f5ec061896 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3121,6 +3121,15 @@ S: Maintained
F: Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
F: drivers/memory/brcmstb_dpfe.c
+BROADCOM SPI DRIVER
+M: Kamal Dasu <kdasu.kdev@gmail.com>
+M: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+F: drivers/spi/spi-bcm-qspi.*
+F: drivers/spi/spi-brcmstb-qspi.c
+F: drivers/spi/spi-iproc-qspi.c
+
BROADCOM SYSTEMPORT ETHERNET DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index feed3db21c10..ee89ffb6dde8 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -513,7 +513,7 @@ EXPORT_SYMBOL(geni_se_resources_on);
*/
int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
{
- unsigned long freq = 0;
+ long freq = 0;
int i;
if (se->clk_perf_tbl) {
@@ -529,7 +529,7 @@ int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) {
freq = clk_round_rate(se->clk, freq + 1);
- if (!freq || freq == se->clk_perf_tbl[i - 1])
+ if (freq <= 0 || freq == se->clk_perf_tbl[i - 1])
break;
se->clk_perf_tbl[i] = freq;
}
@@ -544,16 +544,17 @@ EXPORT_SYMBOL(geni_se_clk_tbl_get);
* @se: Pointer to the concerned serial engine.
* @req_freq: Requested clock frequency.
* @index: Index of the resultant frequency in the table.
- * @res_freq: Resultant frequency which matches or is closer to the
- * requested frequency.
+ * @res_freq: Resultant frequency of the source clock.
* @exact: Flag to indicate exact multiple requirement of the requested
* frequency.
*
- * This function is called by the protocol drivers to determine the matching
- * or exact multiple of the requested frequency, as provided by the serial
- * engine clock in order to meet the performance requirements. If there is
- * no matching or exact multiple of the requested frequency found, then it
- * selects the closest floor frequency, if exact flag is not set.
+ * This function is called by the protocol drivers to determine the best match
+ * of the requested frequency as provided by the serial engine clock in order
+ * to meet the performance requirements.
+ *
+ * If we return success:
+ * - if @exact is true then @res_freq / <an_integer> == @req_freq
+ * - if @exact is false then @res_freq / <an_integer> <= @req_freq
*
* Return: 0 on success, standard Linux error codes on failure.
*/
@@ -564,6 +565,9 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
unsigned long *tbl;
int num_clk_levels;
int i;
+ unsigned long best_delta;
+ unsigned long new_delta;
+ unsigned int divider;
num_clk_levels = geni_se_clk_tbl_get(se, &tbl);
if (num_clk_levels < 0)
@@ -572,18 +576,21 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
if (num_clk_levels == 0)
return -EINVAL;
- *res_freq = 0;
+ best_delta = ULONG_MAX;
for (i = 0; i < num_clk_levels; i++) {
- if (!(tbl[i] % req_freq)) {
+ divider = DIV_ROUND_UP(tbl[i], req_freq);
+ new_delta = req_freq - tbl[i] / divider;
+ if (new_delta < best_delta) {
+ /* We have a new best! */
*index = i;
*res_freq = tbl[i];
- return 0;
- }
- if (!(*res_freq) || ((tbl[i] > *res_freq) &&
- (tbl[i] < req_freq))) {
- *index = i;
- *res_freq = tbl[i];
+ /* If the new best is exact then we're done */
+ if (new_delta == 0)
+ return 0;
+
+ /* Record how close we got */
+ best_delta = new_delta;
}
}
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 671d078349cc..f756450a8914 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -129,7 +129,7 @@ config SPI_BCM63XX
config SPI_BCM63XX_HSSPI
tristate "Broadcom BCM63XX HS SPI controller driver"
- depends on BCM63XX || COMPILE_TEST
+ depends on BCM63XX || ARCH_BCM_63XX || COMPILE_TEST
help
This enables support for the High Speed SPI controller present on
newer Broadcom BCM63XX SoCs.
@@ -520,6 +520,12 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI and QSPI blocks.
+config SPI_QCOM_QSPI
+ tristate "QTI QSPI controller"
+ depends on ARCH_QCOM
+ help
+ QSPI(Quad SPI) driver for Qualcomm QSPI controller.
+
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
depends on ARCH_QCOM || (ARM && COMPILE_TEST)
@@ -533,6 +539,18 @@ config SPI_QUP
This driver can also be built as a module. If so, the module
will be called spi_qup.
+config SPI_QCOM_GENI
+ tristate "Qualcomm GENI based SPI controller"
+ depends on QCOM_GENI_SE
+ help
+ This driver supports GENI serial engine based SPI controller in
+ master mode on the Qualcomm Technologies Inc.'s SoCs. If you say
+ yes to this option, support will be included for the built-in SPI
+ interface on the Qualcomm Technologies Inc.'s SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called spi-geni-qcom.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
@@ -596,6 +614,22 @@ config SPI_SIRF
help
SPI driver for CSR SiRFprimaII SoCs
+config SPI_SLAVE_MT27XX
+ tristate "MediaTek SPI slave device"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on SPI_SLAVE
+ help
+ This selects the MediaTek(R) SPI slave device driver.
+ If you want to use MediaTek(R) SPI slave interface,
+ say Y or M here.If you are not sure, say N.
+ SPI slave drivers for Mediatek MT27XX series ARM SoCs.
+
+config SPI_SPRD
+ tristate "Spreadtrum SPI controller"
+ depends on ARCH_SPRD || COMPILE_TEST
+ help
+ SPI driver for Spreadtrum SoCs.
+
config SPI_SPRD_ADI
tristate "Spreadtrum ADI controller"
depends on ARCH_SPRD || COMPILE_TEST
@@ -613,6 +647,15 @@ config SPI_STM32
is not available, the driver automatically falls back to
PIO mode.
+config SPI_STM32_QSPI
+ tristate "STMicroelectronics STM32 QUAD SPI controller"
+ depends on ARCH_STM32 || COMPILE_TEST
+ depends on OF
+ help
+ This enables support for the Quad SPI controller in master mode.
+ This driver does not support generic SPI. The implementation only
+ supports spi-mem interface.
+
config SPI_ST_SSC4
tristate "STMicroelectronics SPI SSC-based driver"
depends on ARCH_STI || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index a90d55970036..df04dfbe7d70 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -74,6 +74,8 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o
+obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
@@ -88,8 +90,11 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
+obj-$(CONFIG_SPI_SLAVE_MT27XX) += spi-slave-mt27xx.o
+obj-$(CONFIG_SPI_SPRD) += spi-sprd.o
obj-$(CONFIG_SPI_SPRD_ADI) += spi-sprd-adi.o
obj-$(CONFIG_SPI_STM32) += spi-stm32.o
+obj-$(CONFIG_SPI_STM32_QSPI) += spi-stm32-qspi.o
obj-$(CONFIG_SPI_ST_SSC4) += spi-st-ssc4.o
obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 3f890d162934..74fddcd3282b 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1767,10 +1767,8 @@ static int atmel_spi_suspend(struct device *dev)
/* Stop the queue running */
ret = spi_master_suspend(master);
- if (ret) {
- dev_warn(dev, "cannot suspend master\n");
+ if (ret)
return ret;
- }
if (!pm_runtime_suspended(dev))
atmel_spi_runtime_suspend(dev);
@@ -1799,11 +1797,7 @@ static int atmel_spi_resume(struct device *dev)
}
/* Start the queue running */
- ret = spi_master_resume(master);
- if (ret)
- dev_err(dev, "problem starting queue (%d)\n", ret);
-
- return ret;
+ return spi_master_resume(master);
}
#endif
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 8612525fa4e3..584bcb018a62 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -89,7 +89,7 @@
#define BSPI_BPP_MODE_SELECT_MASK BIT(8)
#define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
-#define BSPI_READ_LENGTH 512
+#define BSPI_READ_LENGTH 256
/* MSPI register offsets */
#define MSPI_SPCR0_LSB 0x000
@@ -355,7 +355,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
int bpc = 0, bpp = 0;
u8 command = op->cmd.opcode;
int width = op->cmd.buswidth ? op->cmd.buswidth : SPI_NBITS_SINGLE;
- int addrlen = op->addr.nbytes * 8;
+ int addrlen = op->addr.nbytes;
int flex_mode = 1;
dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index c23849f7aa7b..9a06ffdb73b8 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -101,6 +101,7 @@ struct bcm63xx_hsspi {
struct platform_device *pdev;
struct clk *clk;
+ struct clk *pll_clk;
void __iomem *regs;
u8 __iomem *fifo;
@@ -332,7 +333,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
struct resource *res_mem;
void __iomem *regs;
struct device *dev = &pdev->dev;
- struct clk *clk;
+ struct clk *clk, *pll_clk = NULL;
int irq, ret;
u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS;
@@ -358,7 +359,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
rate = clk_get_rate(clk);
if (!rate) {
- struct clk *pll_clk = devm_clk_get(dev, "pll");
+ pll_clk = devm_clk_get(dev, "pll");
if (IS_ERR(pll_clk)) {
ret = PTR_ERR(pll_clk);
@@ -373,19 +374,20 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
clk_disable_unprepare(pll_clk);
if (!rate) {
ret = -EINVAL;
- goto out_disable_clk;
+ goto out_disable_pll_clk;
}
}
master = spi_alloc_master(&pdev->dev, sizeof(*bs));
if (!master) {
ret = -ENOMEM;
- goto out_disable_clk;
+ goto out_disable_pll_clk;
}
bs = spi_master_get_devdata(master);
bs->pdev = pdev;
bs->clk = clk;
+ bs->pll_clk = pll_clk;
bs->regs = regs;
bs->speed_hz = rate;
bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
@@ -440,6 +442,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
out_put_master:
spi_master_put(master);
+out_disable_pll_clk:
+ clk_disable_unprepare(pll_clk);
out_disable_clk:
clk_disable_unprepare(clk);
return ret;
@@ -453,6 +457,7 @@ static int bcm63xx_hsspi_remove(struct platform_device *pdev)
/* reset the hardware and block queue progress */
__raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
+ clk_disable_unprepare(bs->pll_clk);
clk_disable_unprepare(bs->clk);
return 0;
@@ -465,6 +470,7 @@ static int bcm63xx_hsspi_suspend(struct device *dev)
struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
spi_master_suspend(master);
+ clk_disable_unprepare(bs->pll_clk);
clk_disable_unprepare(bs->clk);
return 0;
@@ -480,6 +486,12 @@ static int bcm63xx_hsspi_resume(struct device *dev)
if (ret)
return ret;
+ if (bs->pll_clk) {
+ ret = clk_prepare_enable(bs->pll_clk);
+ if (ret)
+ return ret;
+ }
+
spi_master_resume(master);
return 0;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index a02099c90c5c..56adec83f8fc 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -208,13 +208,11 @@ static inline void clear_io_bits(void __iomem *addr, u32 bits)
static void davinci_spi_chipselect(struct spi_device *spi, int value)
{
struct davinci_spi *dspi;
- struct davinci_spi_platform_data *pdata;
struct davinci_spi_config *spicfg = spi->controller_data;
u8 chip_sel = spi->chip_select;
u16 spidat1 = CS_DEFAULT;
dspi = spi_master_get_devdata(spi->master);
- pdata = &dspi->pdata;
/* program delay transfers if tx_delay is non zero */
if (spicfg && spicfg->wdelay)
@@ -232,7 +230,8 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
!(spi->mode & SPI_CS_HIGH));
} else {
if (value == BITBANG_CS_ACTIVE) {
- spidat1 |= SPIDAT1_CSHOLD_MASK;
+ if (!(spi->mode & SPI_CS_WORD))
+ spidat1 |= SPIDAT1_CSHOLD_MASK;
spidat1 &= ~(0x1 << chip_sel);
}
}
@@ -421,26 +420,17 @@ static int davinci_spi_setup(struct spi_device *spi)
{
int retval = 0;
struct davinci_spi *dspi;
- struct davinci_spi_platform_data *pdata;
struct spi_master *master = spi->master;
struct device_node *np = spi->dev.of_node;
bool internal_cs = true;
dspi = spi_master_get_devdata(spi->master);
- pdata = &dspi->pdata;
if (!(spi->mode & SPI_NO_CS)) {
if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
retval = gpio_direction_output(
spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
internal_cs = false;
- } else if (pdata->chip_sel &&
- spi->chip_select < pdata->num_chipselect &&
- pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
- spi->cs_gpio = pdata->chip_sel[spi->chip_select];
- retval = gpio_direction_output(
- spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
- internal_cs = false;
}
if (retval) {
@@ -449,8 +439,9 @@ static int davinci_spi_setup(struct spi_device *spi)
return retval;
}
- if (internal_cs)
+ if (internal_cs) {
set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
+ }
}
if (spi->mode & SPI_READY)
@@ -985,7 +976,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
dspi->prescaler_limit = pdata->prescaler_limit;
dspi->version = pdata->version;
- dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
+ dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_WORD;
if (dspi->version == SPI_VERSION_2)
dspi->bitbang.flags |= SPI_READY;
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index e80f60ed6fdf..3ffb6a40fe0c 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -34,8 +34,9 @@ struct dw_spi_mmio {
};
#define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL 0x24
-#define OCELOT_IF_SI_OWNER_MASK GENMASK(5, 4)
#define OCELOT_IF_SI_OWNER_OFFSET 4
+#define JAGUAR2_IF_SI_OWNER_OFFSET 6
+#define MSCC_IF_SI_OWNER_MASK GENMASK(1, 0)
#define MSCC_IF_SI_OWNER_SISL 0
#define MSCC_IF_SI_OWNER_SIBM 1
#define MSCC_IF_SI_OWNER_SIMC 2
@@ -76,7 +77,8 @@ static void dw_spi_mscc_set_cs(struct spi_device *spi, bool enable)
}
static int dw_spi_mscc_init(struct platform_device *pdev,
- struct dw_spi_mmio *dwsmmio)
+ struct dw_spi_mmio *dwsmmio,
+ const char *cpu_syscon, u32 if_si_owner_offset)
{
struct dw_spi_mscc *dwsmscc;
struct resource *res;
@@ -92,7 +94,7 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
return PTR_ERR(dwsmscc->spi_mst);
}
- dwsmscc->syscon = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
+ dwsmscc->syscon = syscon_regmap_lookup_by_compatible(cpu_syscon);
if (IS_ERR(dwsmscc->syscon))
return PTR_ERR(dwsmscc->syscon);
@@ -101,8 +103,8 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
/* Select the owner of the SI interface */
regmap_update_bits(dwsmscc->syscon, MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL,
- OCELOT_IF_SI_OWNER_MASK,
- MSCC_IF_SI_OWNER_SIMC << OCELOT_IF_SI_OWNER_OFFSET);
+ MSCC_IF_SI_OWNER_MASK << if_si_owner_offset,
+ MSCC_IF_SI_OWNER_SIMC << if_si_owner_offset);
dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
dwsmmio->priv = dwsmscc;
@@ -110,6 +112,28 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
return 0;
}
+static int dw_spi_mscc_ocelot_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ return dw_spi_mscc_init(pdev, dwsmmio, "mscc,ocelot-cpu-syscon",
+ OCELOT_IF_SI_OWNER_OFFSET);
+}
+
+static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ return dw_spi_mscc_init(pdev, dwsmmio, "mscc,jaguar2-cpu-syscon",
+ JAGUAR2_IF_SI_OWNER_OFFSET);
+}
+
+static int dw_spi_alpine_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ dwsmmio->dws.cs_override = 1;
+
+ return 0;
+}
+
static int dw_spi_mmio_probe(struct platform_device *pdev)
{
int (*init_func)(struct platform_device *pdev,
@@ -212,7 +236,9 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "snps,dw-apb-ssi", },
- { .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_init},
+ { .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
+ { .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
+ { .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index ac2eb89ef7a5..b705f2bdb8b9 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -144,6 +144,8 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
if (!enable)
dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
+ else if (dws->cs_override)
+ dw_writel(dws, DW_SPI_SER, 0);
}
EXPORT_SYMBOL_GPL(dw_spi_set_cs);
@@ -308,15 +310,10 @@ static int dw_spi_transfer_one(struct spi_controller *master,
dws->current_freq = transfer->speed_hz;
spi_set_clk(dws, chip->clk_div);
}
- if (transfer->bits_per_word == 8) {
- dws->n_bytes = 1;
- dws->dma_width = 1;
- } else if (transfer->bits_per_word == 16) {
- dws->n_bytes = 2;
- dws->dma_width = 2;
- } else {
- return -EINVAL;
- }
+
+ dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
+ dws->dma_width = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
+
/* Default SPI mode is SCPOL = 0, SCPH = 0 */
cr0 = (transfer->bits_per_word - 1)
| (chip->type << SPI_FRF_OFFSET)
@@ -468,6 +465,10 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
dws->fifo_len = (fifo == 1) ? 0 : fifo;
dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
}
+
+ /* enable HW fixup for explicit CS deselect for Amazon's alpine chip */
+ if (dws->cs_override)
+ dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF);
}
int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
@@ -496,7 +497,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
}
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
- master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
master->bus_num = dws->bus_num;
master->num_chipselect = dws->num_cs;
master->setup = dw_spi_setup;
@@ -572,13 +573,8 @@ EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
int dw_spi_resume_host(struct dw_spi *dws)
{
- int ret;
-
spi_hw_init(&dws->master->dev, dws);
- ret = spi_controller_resume(dws->master);
- if (ret)
- dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
- return ret;
+ return spi_controller_resume(dws->master);
}
EXPORT_SYMBOL_GPL(dw_spi_resume_host);
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 0168b08364d5..c9c15881e982 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -32,6 +32,7 @@
#define DW_SPI_IDR 0x58
#define DW_SPI_VERSION 0x5c
#define DW_SPI_DR 0x60
+#define DW_SPI_CS_OVERRIDE 0xf4
/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET 0
@@ -109,6 +110,7 @@ struct dw_spi {
u32 fifo_len; /* depth of the FIFO buffer */
u32 max_freq; /* max bus freq supported */
+ int cs_override;
u32 reg_io_width; /* DR I/O width in bytes */
u16 bus_num;
u16 num_cs; /* supported slave numbers */
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index f1526757aaf6..79fc3940245a 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -246,6 +246,19 @@ static int ep93xx_spi_read_write(struct spi_master *master)
return -EINPROGRESS;
}
+static enum dma_transfer_direction
+ep93xx_dma_data_to_trans_dir(enum dma_data_direction dir)
+{
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ return DMA_MEM_TO_DEV;
+ case DMA_FROM_DEVICE:
+ return DMA_DEV_TO_MEM;
+ default:
+ return DMA_TRANS_NONE;
+ }
+}
+
/**
* ep93xx_spi_dma_prepare() - prepares a DMA transfer
* @master: SPI master
@@ -257,7 +270,7 @@ static int ep93xx_spi_read_write(struct spi_master *master)
*/
static struct dma_async_tx_descriptor *
ep93xx_spi_dma_prepare(struct spi_master *master,
- enum dma_transfer_direction dir)
+ enum dma_data_direction dir)
{
struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct spi_transfer *xfer = master->cur_msg->state;
@@ -277,9 +290,9 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
memset(&conf, 0, sizeof(conf));
- conf.direction = dir;
+ conf.direction = ep93xx_dma_data_to_trans_dir(dir);
- if (dir == DMA_DEV_TO_MEM) {
+ if (dir == DMA_FROM_DEVICE) {
chan = espi->dma_rx;
buf = xfer->rx_buf;
sgt = &espi->rx_sgt;
@@ -343,7 +356,8 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
if (!nents)
return ERR_PTR(-ENOMEM);
- txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK);
+ txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, conf.direction,
+ DMA_CTRL_ACK);
if (!txd) {
dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
return ERR_PTR(-ENOMEM);
@@ -360,13 +374,13 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
* unmapped.
*/
static void ep93xx_spi_dma_finish(struct spi_master *master,
- enum dma_transfer_direction dir)
+ enum dma_data_direction dir)
{
struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_chan *chan;
struct sg_table *sgt;
- if (dir == DMA_DEV_TO_MEM) {
+ if (dir == DMA_FROM_DEVICE) {
chan = espi->dma_rx;
sgt = &espi->rx_sgt;
} else {
@@ -381,8 +395,8 @@ static void ep93xx_spi_dma_callback(void *callback_param)
{
struct spi_master *master = callback_param;
- ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV);
- ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+ ep93xx_spi_dma_finish(master, DMA_TO_DEVICE);
+ ep93xx_spi_dma_finish(master, DMA_FROM_DEVICE);
spi_finalize_current_transfer(master);
}
@@ -392,15 +406,15 @@ static int ep93xx_spi_dma_transfer(struct spi_master *master)
struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_async_tx_descriptor *rxd, *txd;
- rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM);
+ rxd = ep93xx_spi_dma_prepare(master, DMA_FROM_DEVICE);
if (IS_ERR(rxd)) {
dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
return PTR_ERR(rxd);
}
- txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV);
+ txd = ep93xx_spi_dma_prepare(master, DMA_TO_DEVICE);
if (IS_ERR(txd)) {
- ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+ ep93xx_spi_dma_finish(master, DMA_FROM_DEVICE);
dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
return PTR_ERR(txd);
}
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 1e8ff6256079..cf2118dc91f4 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -798,10 +798,8 @@ static int of_fsl_espi_suspend(struct device *dev)
int ret;
ret = spi_master_suspend(master);
- if (ret) {
- dev_warn(dev, "cannot suspend master\n");
+ if (ret)
return ret;
- }
return pm_runtime_force_suspend(dev);
}
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index e6d5cc6ab108..51670976faa3 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -276,7 +276,7 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi)
fsl_lpspi_set_watermark(fsl_lpspi);
- temp = CFGR1_PCSCFG | CFGR1_MASTER | CFGR1_NOSTALL;
+ temp = CFGR1_PCSCFG | CFGR1_MASTER;
if (fsl_lpspi->config.mode & SPI_CS_HIGH)
temp |= CFGR1_PCSPOL;
writel(temp, fsl_lpspi->base + IMX7ULP_CFGR1);
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
new file mode 100644
index 000000000000..6432ecc4e2ca
--- /dev/null
+++ b/drivers/spi/spi-geni-qcom.c
@@ -0,0 +1,703 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/qcom-geni-se.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+
+/* SPI SE specific registers and respective register fields */
+#define SE_SPI_CPHA 0x224
+#define CPHA BIT(0)
+
+#define SE_SPI_LOOPBACK 0x22c
+#define LOOPBACK_ENABLE 0x1
+#define NORMAL_MODE 0x0
+#define LOOPBACK_MSK GENMASK(1, 0)
+
+#define SE_SPI_CPOL 0x230
+#define CPOL BIT(2)
+
+#define SE_SPI_DEMUX_OUTPUT_INV 0x24c
+#define CS_DEMUX_OUTPUT_INV_MSK GENMASK(3, 0)
+
+#define SE_SPI_DEMUX_SEL 0x250
+#define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0)
+
+#define SE_SPI_TRANS_CFG 0x25c
+#define CS_TOGGLE BIT(0)
+
+#define SE_SPI_WORD_LEN 0x268
+#define WORD_LEN_MSK GENMASK(9, 0)
+#define MIN_WORD_LEN 4
+
+#define SE_SPI_TX_TRANS_LEN 0x26c
+#define SE_SPI_RX_TRANS_LEN 0x270
+#define TRANS_LEN_MSK GENMASK(23, 0)
+
+#define SE_SPI_PRE_POST_CMD_DLY 0x274
+
+#define SE_SPI_DELAY_COUNTERS 0x278
+#define SPI_INTER_WORDS_DELAY_MSK GENMASK(9, 0)
+#define SPI_CS_CLK_DELAY_MSK GENMASK(19, 10)
+#define SPI_CS_CLK_DELAY_SHFT 10
+
+/* M_CMD OP codes for SPI */
+#define SPI_TX_ONLY 1
+#define SPI_RX_ONLY 2
+#define SPI_FULL_DUPLEX 3
+#define SPI_TX_RX 7
+#define SPI_CS_ASSERT 8
+#define SPI_CS_DEASSERT 9
+#define SPI_SCK_ONLY 10
+/* M_CMD params for SPI */
+#define SPI_PRE_CMD_DELAY BIT(0)
+#define TIMESTAMP_BEFORE BIT(1)
+#define FRAGMENTATION BIT(2)
+#define TIMESTAMP_AFTER BIT(3)
+#define POST_CMD_DELAY BIT(4)
+
+/* SPI M_COMMAND OPCODE */
+enum spi_mcmd_code {
+ CMD_NONE,
+ CMD_XFER,
+ CMD_CS,
+ CMD_CANCEL,
+};
+
+
+struct spi_geni_master {
+ struct geni_se se;
+ struct device *dev;
+ u32 tx_fifo_depth;
+ u32 fifo_width_bits;
+ u32 tx_wm;
+ unsigned long cur_speed_hz;
+ unsigned int cur_bits_per_word;
+ unsigned int tx_rem_bytes;
+ unsigned int rx_rem_bytes;
+ const struct spi_transfer *cur_xfer;
+ struct completion xfer_done;
+ unsigned int oversampling;
+ spinlock_t lock;
+ unsigned int cur_mcmd;
+ int irq;
+};
+
+static void handle_fifo_timeout(struct spi_master *spi,
+ struct spi_message *msg);
+
+static int get_spi_clk_cfg(unsigned int speed_hz,
+ struct spi_geni_master *mas,
+ unsigned int *clk_idx,
+ unsigned int *clk_div)
+{
+ unsigned long sclk_freq;
+ unsigned int actual_hz;
+ struct geni_se *se = &mas->se;
+ int ret;
+
+ ret = geni_se_clk_freq_match(&mas->se,
+ speed_hz * mas->oversampling,
+ clk_idx, &sclk_freq, false);
+ if (ret) {
+ dev_err(mas->dev, "Failed(%d) to find src clk for %dHz\n",
+ ret, speed_hz);
+ return ret;
+ }
+
+ *clk_div = DIV_ROUND_UP(sclk_freq, mas->oversampling * speed_hz);
+ actual_hz = sclk_freq / (mas->oversampling * *clk_div);
+
+ dev_dbg(mas->dev, "req %u=>%u sclk %lu, idx %d, div %d\n", speed_hz,
+ actual_hz, sclk_freq, *clk_idx, *clk_div);
+ ret = clk_set_rate(se->clk, sclk_freq);
+ if (ret)
+ dev_err(mas->dev, "clk_set_rate failed %d\n", ret);
+ return ret;
+}
+
+static void spi_geni_set_cs(struct spi_device *slv, bool set_flag)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(slv->master);
+ struct spi_master *spi = dev_get_drvdata(mas->dev);
+ struct geni_se *se = &mas->se;
+ unsigned long timeout;
+
+ reinit_completion(&mas->xfer_done);
+ pm_runtime_get_sync(mas->dev);
+ if (!(slv->mode & SPI_CS_HIGH))
+ set_flag = !set_flag;
+
+ mas->cur_mcmd = CMD_CS;
+ if (set_flag)
+ geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0);
+ else
+ geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0);
+
+ timeout = wait_for_completion_timeout(&mas->xfer_done, HZ);
+ if (!timeout)
+ handle_fifo_timeout(spi, NULL);
+
+ pm_runtime_put(mas->dev);
+}
+
+static void spi_setup_word_len(struct spi_geni_master *mas, u16 mode,
+ unsigned int bits_per_word)
+{
+ unsigned int pack_words;
+ bool msb_first = (mode & SPI_LSB_FIRST) ? false : true;
+ struct geni_se *se = &mas->se;
+ u32 word_len;
+
+ word_len = readl(se->base + SE_SPI_WORD_LEN);
+
+ /*
+ * If bits_per_word isn't a byte aligned value, set the packing to be
+ * 1 SPI word per FIFO word.
+ */
+ if (!(mas->fifo_width_bits % bits_per_word))
+ pack_words = mas->fifo_width_bits / bits_per_word;
+ else
+ pack_words = 1;
+ word_len &= ~WORD_LEN_MSK;
+ word_len |= ((bits_per_word - MIN_WORD_LEN) & WORD_LEN_MSK);
+ geni_se_config_packing(&mas->se, bits_per_word, pack_words, msb_first,
+ true, true);
+ writel(word_len, se->base + SE_SPI_WORD_LEN);
+}
+
+static int setup_fifo_params(struct spi_device *spi_slv,
+ struct spi_master *spi)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ struct geni_se *se = &mas->se;
+ u32 loopback_cfg, cpol, cpha, demux_output_inv;
+ u32 demux_sel, clk_sel, m_clk_cfg, idx, div;
+ int ret;
+
+ loopback_cfg = readl(se->base + SE_SPI_LOOPBACK);
+ cpol = readl(se->base + SE_SPI_CPOL);
+ cpha = readl(se->base + SE_SPI_CPHA);
+ demux_output_inv = 0;
+ loopback_cfg &= ~LOOPBACK_MSK;
+ cpol &= ~CPOL;
+ cpha &= ~CPHA;
+
+ if (spi_slv->mode & SPI_LOOP)
+ loopback_cfg |= LOOPBACK_ENABLE;
+
+ if (spi_slv->mode & SPI_CPOL)
+ cpol |= CPOL;
+
+ if (spi_slv->mode & SPI_CPHA)
+ cpha |= CPHA;
+
+ if (spi_slv->mode & SPI_CS_HIGH)
+ demux_output_inv = BIT(spi_slv->chip_select);
+
+ demux_sel = spi_slv->chip_select;
+ mas->cur_speed_hz = spi_slv->max_speed_hz;
+ mas->cur_bits_per_word = spi_slv->bits_per_word;
+
+ ret = get_spi_clk_cfg(mas->cur_speed_hz, mas, &idx, &div);
+ if (ret) {
+ dev_err(mas->dev, "Err setting clks ret(%d) for %ld\n",
+ ret, mas->cur_speed_hz);
+ return ret;
+ }
+
+ clk_sel = idx & CLK_SEL_MSK;
+ m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
+ spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
+ writel(loopback_cfg, se->base + SE_SPI_LOOPBACK);
+ writel(demux_sel, se->base + SE_SPI_DEMUX_SEL);
+ writel(cpha, se->base + SE_SPI_CPHA);
+ writel(cpol, se->base + SE_SPI_CPOL);
+ writel(demux_output_inv, se->base + SE_SPI_DEMUX_OUTPUT_INV);
+ writel(clk_sel, se->base + SE_GENI_CLK_SEL);
+ writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
+ return 0;
+}
+
+static int spi_geni_prepare_message(struct spi_master *spi,
+ struct spi_message *spi_msg)
+{
+ int ret;
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ struct geni_se *se = &mas->se;
+
+ geni_se_select_mode(se, GENI_SE_FIFO);
+ reinit_completion(&mas->xfer_done);
+ ret = setup_fifo_params(spi_msg->spi, spi);
+ if (ret)
+ dev_err(mas->dev, "Couldn't select mode %d\n", ret);
+ return ret;
+}
+
+static int spi_geni_init(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+ unsigned int proto, major, minor, ver;
+
+ pm_runtime_get_sync(mas->dev);
+
+ proto = geni_se_read_proto(se);
+ if (proto != GENI_SE_SPI) {
+ dev_err(mas->dev, "Invalid proto %d\n", proto);
+ pm_runtime_put(mas->dev);
+ return -ENXIO;
+ }
+ mas->tx_fifo_depth = geni_se_get_tx_fifo_depth(se);
+
+ /* Width of Tx and Rx FIFO is same */
+ mas->fifo_width_bits = geni_se_get_tx_fifo_width(se);
+
+ /*
+ * Hardware programming guide suggests to configure
+ * RX FIFO RFR level to fifo_depth-2.
+ */
+ geni_se_init(se, 0x0, mas->tx_fifo_depth - 2);
+ /* Transmit an entire FIFO worth of data per IRQ */
+ mas->tx_wm = 1;
+ ver = geni_se_get_qup_hw_version(se);
+ major = GENI_SE_VERSION_MAJOR(ver);
+ minor = GENI_SE_VERSION_MINOR(ver);
+
+ if (major == 1 && minor == 0)
+ mas->oversampling = 2;
+ else
+ mas->oversampling = 1;
+
+ pm_runtime_put(mas->dev);
+ return 0;
+}
+
+static void setup_fifo_xfer(struct spi_transfer *xfer,
+ struct spi_geni_master *mas,
+ u16 mode, struct spi_master *spi)
+{
+ u32 m_cmd = 0;
+ u32 spi_tx_cfg, len;
+ struct geni_se *se = &mas->se;
+
+ spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
+ if (xfer->bits_per_word != mas->cur_bits_per_word) {
+ spi_setup_word_len(mas, mode, xfer->bits_per_word);
+ mas->cur_bits_per_word = xfer->bits_per_word;
+ }
+
+ /* Speed and bits per word can be overridden per transfer */
+ if (xfer->speed_hz != mas->cur_speed_hz) {
+ int ret;
+ u32 clk_sel, m_clk_cfg;
+ unsigned int idx, div;
+
+ ret = get_spi_clk_cfg(xfer->speed_hz, mas, &idx, &div);
+ if (ret) {
+ dev_err(mas->dev, "Err setting clks:%d\n", ret);
+ return;
+ }
+ /*
+ * SPI core clock gets configured with the requested frequency
+ * or the frequency closer to the requested frequency.
+ * For that reason requested frequency is stored in the
+ * cur_speed_hz and referred in the consecutive transfer instead
+ * of calling clk_get_rate() API.
+ */
+ mas->cur_speed_hz = xfer->speed_hz;
+ clk_sel = idx & CLK_SEL_MSK;
+ m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
+ writel(clk_sel, se->base + SE_GENI_CLK_SEL);
+ writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
+ }
+
+ mas->tx_rem_bytes = 0;
+ mas->rx_rem_bytes = 0;
+ if (xfer->tx_buf && xfer->rx_buf)
+ m_cmd = SPI_FULL_DUPLEX;
+ else if (xfer->tx_buf)
+ m_cmd = SPI_TX_ONLY;
+ else if (xfer->rx_buf)
+ m_cmd = SPI_RX_ONLY;
+
+ spi_tx_cfg &= ~CS_TOGGLE;
+
+ if (!(mas->cur_bits_per_word % MIN_WORD_LEN))
+ len = xfer->len * BITS_PER_BYTE / mas->cur_bits_per_word;
+ else
+ len = xfer->len / (mas->cur_bits_per_word / BITS_PER_BYTE + 1);
+ len &= TRANS_LEN_MSK;
+
+ mas->cur_xfer = xfer;
+ if (m_cmd & SPI_TX_ONLY) {
+ mas->tx_rem_bytes = xfer->len;
+ writel(len, se->base + SE_SPI_TX_TRANS_LEN);
+ }
+
+ if (m_cmd & SPI_RX_ONLY) {
+ writel(len, se->base + SE_SPI_RX_TRANS_LEN);
+ mas->rx_rem_bytes = xfer->len;
+ }
+ writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
+ mas->cur_mcmd = CMD_XFER;
+ geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION);
+
+ /*
+ * TX_WATERMARK_REG should be set after SPI configuration and
+ * setting up GENI SE engine, as driver starts data transfer
+ * for the watermark interrupt.
+ */
+ if (m_cmd & SPI_TX_ONLY)
+ writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
+}
+
+static void handle_fifo_timeout(struct spi_master *spi,
+ struct spi_message *msg)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ unsigned long time_left, flags;
+ struct geni_se *se = &mas->se;
+
+ spin_lock_irqsave(&mas->lock, flags);
+ reinit_completion(&mas->xfer_done);
+ mas->cur_mcmd = CMD_CANCEL;
+ geni_se_cancel_m_cmd(se);
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+ spin_unlock_irqrestore(&mas->lock, flags);
+ time_left = wait_for_completion_timeout(&mas->xfer_done, HZ);
+ if (time_left)
+ return;
+
+ spin_lock_irqsave(&mas->lock, flags);
+ reinit_completion(&mas->xfer_done);
+ geni_se_abort_m_cmd(se);
+ spin_unlock_irqrestore(&mas->lock, flags);
+ time_left = wait_for_completion_timeout(&mas->xfer_done, HZ);
+ if (!time_left)
+ dev_err(mas->dev, "Failed to cancel/abort m_cmd\n");
+}
+
+static int spi_geni_transfer_one(struct spi_master *spi,
+ struct spi_device *slv,
+ struct spi_transfer *xfer)
+{
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ /* Terminate and return success for 0 byte length transfer */
+ if (!xfer->len)
+ return 0;
+
+ setup_fifo_xfer(xfer, mas, slv->mode, spi);
+ return 1;
+}
+
+static unsigned int geni_byte_per_fifo_word(struct spi_geni_master *mas)
+{
+ /*
+ * Calculate how many bytes we'll put in each FIFO word. If the
+ * transfer words don't pack cleanly into a FIFO word we'll just put
+ * one transfer word in each FIFO word. If they do pack we'll pack 'em.
+ */
+ if (mas->fifo_width_bits % mas->cur_bits_per_word)
+ return roundup_pow_of_two(DIV_ROUND_UP(mas->cur_bits_per_word,
+ BITS_PER_BYTE));
+
+ return mas->fifo_width_bits / BITS_PER_BYTE;
+}
+
+static void geni_spi_handle_tx(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+ unsigned int max_bytes;
+ const u8 *tx_buf;
+ unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+ unsigned int i = 0;
+
+ max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
+ if (mas->tx_rem_bytes < max_bytes)
+ max_bytes = mas->tx_rem_bytes;
+
+ tx_buf = mas->cur_xfer->tx_buf + mas->cur_xfer->len - mas->tx_rem_bytes;
+ while (i < max_bytes) {
+ unsigned int j;
+ unsigned int bytes_to_write;
+ u32 fifo_word = 0;
+ u8 *fifo_byte = (u8 *)&fifo_word;
+
+ bytes_to_write = min(bytes_per_fifo_word, max_bytes - i);
+ for (j = 0; j < bytes_to_write; j++)
+ fifo_byte[j] = tx_buf[i++];
+ iowrite32_rep(se->base + SE_GENI_TX_FIFOn, &fifo_word, 1);
+ }
+ mas->tx_rem_bytes -= max_bytes;
+ if (!mas->tx_rem_bytes)
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+}
+
+static void geni_spi_handle_rx(struct spi_geni_master *mas)
+{
+ struct geni_se *se = &mas->se;
+ u32 rx_fifo_status;
+ unsigned int rx_bytes;
+ unsigned int rx_last_byte_valid;
+ u8 *rx_buf;
+ unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+ unsigned int i = 0;
+
+ rx_fifo_status = readl(se->base + SE_GENI_RX_FIFO_STATUS);
+ rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * bytes_per_fifo_word;
+ if (rx_fifo_status & RX_LAST) {
+ rx_last_byte_valid = rx_fifo_status & RX_LAST_BYTE_VALID_MSK;
+ rx_last_byte_valid >>= RX_LAST_BYTE_VALID_SHFT;
+ if (rx_last_byte_valid && rx_last_byte_valid < 4)
+ rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
+ }
+ if (mas->rx_rem_bytes < rx_bytes)
+ rx_bytes = mas->rx_rem_bytes;
+
+ rx_buf = mas->cur_xfer->rx_buf + mas->cur_xfer->len - mas->rx_rem_bytes;
+ while (i < rx_bytes) {
+ u32 fifo_word = 0;
+ u8 *fifo_byte = (u8 *)&fifo_word;
+ unsigned int bytes_to_read;
+ unsigned int j;
+
+ bytes_to_read = min(bytes_per_fifo_word, rx_bytes - i);
+ ioread32_rep(se->base + SE_GENI_RX_FIFOn, &fifo_word, 1);
+ for (j = 0; j < bytes_to_read; j++)
+ rx_buf[i++] = fifo_byte[j];
+ }
+ mas->rx_rem_bytes -= rx_bytes;
+}
+
+static irqreturn_t geni_spi_isr(int irq, void *data)
+{
+ struct spi_master *spi = data;
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ struct geni_se *se = &mas->se;
+ u32 m_irq;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_HANDLED;
+
+ if (mas->cur_mcmd == CMD_NONE)
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&mas->lock, flags);
+ m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS);
+
+ if ((m_irq & M_RX_FIFO_WATERMARK_EN) || (m_irq & M_RX_FIFO_LAST_EN))
+ geni_spi_handle_rx(mas);
+
+ if (m_irq & M_TX_FIFO_WATERMARK_EN)
+ geni_spi_handle_tx(mas);
+
+ if (m_irq & M_CMD_DONE_EN) {
+ if (mas->cur_mcmd == CMD_XFER)
+ spi_finalize_current_transfer(spi);
+ else if (mas->cur_mcmd == CMD_CS)
+ complete(&mas->xfer_done);
+ mas->cur_mcmd = CMD_NONE;
+ /*
+ * If this happens, then a CMD_DONE came before all the Tx
+ * buffer bytes were sent out. This is unusual, log this
+ * condition and disable the WM interrupt to prevent the
+ * system from stalling due an interrupt storm.
+ * If this happens when all Rx bytes haven't been received, log
+ * the condition.
+ * The only known time this can happen is if bits_per_word != 8
+ * and some registers that expect xfer lengths in num spi_words
+ * weren't written correctly.
+ */
+ if (mas->tx_rem_bytes) {
+ writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+ dev_err(mas->dev, "Premature done. tx_rem = %d bpw%d\n",
+ mas->tx_rem_bytes, mas->cur_bits_per_word);
+ }
+ if (mas->rx_rem_bytes)
+ dev_err(mas->dev, "Premature done. rx_rem = %d bpw%d\n",
+ mas->rx_rem_bytes, mas->cur_bits_per_word);
+ }
+
+ if ((m_irq & M_CMD_CANCEL_EN) || (m_irq & M_CMD_ABORT_EN)) {
+ mas->cur_mcmd = CMD_NONE;
+ complete(&mas->xfer_done);
+ }
+
+ writel(m_irq, se->base + SE_GENI_M_IRQ_CLEAR);
+ spin_unlock_irqrestore(&mas->lock, flags);
+ return ret;
+}
+
+static int spi_geni_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct spi_master *spi;
+ struct spi_geni_master *mas;
+ struct resource *res;
+ struct geni_se *se;
+
+ spi = spi_alloc_master(&pdev->dev, sizeof(*mas));
+ if (!spi)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, spi);
+ mas = spi_master_get_devdata(spi);
+ mas->dev = &pdev->dev;
+ mas->se.dev = &pdev->dev;
+ mas->se.wrapper = dev_get_drvdata(pdev->dev.parent);
+ se = &mas->se;
+
+ spi->bus_num = -1;
+ spi->dev.of_node = pdev->dev.of_node;
+ mas->se.clk = devm_clk_get(&pdev->dev, "se");
+ if (IS_ERR(mas->se.clk)) {
+ ret = PTR_ERR(mas->se.clk);
+ dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
+ goto spi_geni_probe_err;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ se->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(se->base)) {
+ ret = PTR_ERR(se->base);
+ goto spi_geni_probe_err;
+ }
+
+ spi->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
+ spi->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
+ spi->num_chipselect = 4;
+ spi->max_speed_hz = 50000000;
+ spi->prepare_message = spi_geni_prepare_message;
+ spi->transfer_one = spi_geni_transfer_one;
+ spi->auto_runtime_pm = true;
+ spi->handle_err = handle_fifo_timeout;
+ spi->set_cs = spi_geni_set_cs;
+
+ init_completion(&mas->xfer_done);
+ spin_lock_init(&mas->lock);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = spi_geni_init(mas);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+
+ mas->irq = platform_get_irq(pdev, 0);
+ if (mas->irq < 0) {
+ ret = mas->irq;
+ dev_err(&pdev->dev, "Err getting IRQ %d\n", ret);
+ goto spi_geni_probe_runtime_disable;
+ }
+
+ ret = request_irq(mas->irq, geni_spi_isr,
+ IRQF_TRIGGER_HIGH, "spi_geni", spi);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+
+ ret = spi_register_master(spi);
+ if (ret)
+ goto spi_geni_probe_free_irq;
+
+ return 0;
+spi_geni_probe_free_irq:
+ free_irq(mas->irq, spi);
+spi_geni_probe_runtime_disable:
+ pm_runtime_disable(&pdev->dev);
+spi_geni_probe_err:
+ spi_master_put(spi);
+ return ret;
+}
+
+static int spi_geni_remove(struct platform_device *pdev)
+{
+ struct spi_master *spi = platform_get_drvdata(pdev);
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ /* Unregister _before_ disabling pm_runtime() so we stop transfers */
+ spi_unregister_master(spi);
+
+ free_irq(mas->irq, spi);
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
+static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ return geni_se_resources_off(&mas->se);
+}
+
+static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+ return geni_se_resources_on(&mas->se);
+}
+
+static int __maybe_unused spi_geni_suspend(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ int ret;
+
+ ret = spi_master_suspend(spi);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ spi_master_resume(spi);
+
+ return ret;
+}
+
+static int __maybe_unused spi_geni_resume(struct device *dev)
+{
+ struct spi_master *spi = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ ret = spi_master_resume(spi);
+ if (ret)
+ pm_runtime_force_suspend(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops spi_geni_pm_ops = {
+ SET_RUNTIME_PM_OPS(spi_geni_runtime_suspend,
+ spi_geni_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(spi_geni_suspend, spi_geni_resume)
+};
+
+static const struct of_device_id spi_geni_dt_match[] = {
+ { .compatible = "qcom,geni-spi" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spi_geni_dt_match);
+
+static struct platform_driver spi_geni_driver = {
+ .probe = spi_geni_probe,
+ .remove = spi_geni_remove,
+ .driver = {
+ .name = "geni_spi",
+ .pm = &spi_geni_pm_ops,
+ .of_match_table = spi_geni_dt_match,
+ },
+};
+module_platform_driver(spi_geni_driver);
+
+MODULE_DESCRIPTION("SPI driver for GENI based QUP cores");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 421bfc7dda67..45973ee3ae11 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -295,9 +295,11 @@ static int spi_gpio_request(struct device *dev,
spi_gpio->miso = devm_gpiod_get_optional(dev, "miso", GPIOD_IN);
if (IS_ERR(spi_gpio->miso))
return PTR_ERR(spi_gpio->miso);
- if (!spi_gpio->miso)
- /* HW configuration without MISO pin */
- *mflags |= SPI_MASTER_NO_RX;
+ /*
+ * No setting SPI_MASTER_NO_RX here - if there is only a MOSI
+ * pin connected the host can still do RX by changing the
+ * direction of the line.
+ */
spi_gpio->sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW);
if (IS_ERR(spi_gpio->sck))
@@ -423,7 +425,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
spi_gpio->bitbang.set_line_direction = spi_gpio_set_direction;
- if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
+ if ((master_flags & SPI_MASTER_NO_TX) == 0) {
spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
@@ -447,10 +449,8 @@ static int spi_gpio_probe(struct platform_device *pdev)
static int spi_gpio_remove(struct platform_device *pdev)
{
struct spi_gpio *spi_gpio;
- struct spi_gpio_platform_data *pdata;
spi_gpio = platform_get_drvdata(pdev);
- pdata = dev_get_platdata(&pdev->dev);
/* stop() unregisters child devices too */
spi_bitbang_stop(&spi_gpio->bitbang);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 08dd3a31a3e5..dd1ce12aa386 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -63,6 +63,7 @@ struct spi_imx_devtype_data {
void (*trigger)(struct spi_imx_data *);
int (*rx_available)(struct spi_imx_data *);
void (*reset)(struct spi_imx_data *);
+ void (*setup_wml)(struct spi_imx_data *);
void (*disable)(struct spi_imx_data *);
bool has_dmamode;
bool has_slavemode;
@@ -216,7 +217,6 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *transfer)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
- unsigned int bytes_per_word, i;
if (!master->dma_rx)
return false;
@@ -224,14 +224,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
if (spi_imx->slave_mode)
return false;
- bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
-
- for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
- if (!(transfer->len % (i * bytes_per_word)))
- break;
- }
+ if (transfer->len < spi_imx->devtype_data->fifo_size)
+ return false;
- spi_imx->wml = i;
spi_imx->dynamic_burst = 0;
return true;
@@ -583,18 +578,21 @@ static int mx51_ecspi_config(struct spi_device *spi)
else /* SCLK is _very_ slow */
usleep_range(delay, delay + 10);
+ return 0;
+}
+
+static void mx51_setup_wml(struct spi_imx_data *spi_imx)
+{
/*
* Configure the DMA register: setup the watermark
* and enable DMA request.
*/
- writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml) |
+ writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
-
- return 0;
}
static int mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
@@ -931,6 +929,7 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
.trigger = mx51_ecspi_trigger,
.rx_available = mx51_ecspi_rx_available,
.reset = mx51_ecspi_reset,
+ .setup_wml = mx51_setup_wml,
.fifo_size = 64,
.has_dmamode = true,
.dynamic_burst = true,
@@ -1138,7 +1137,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
- int ret;
if (!t)
return 0;
@@ -1179,12 +1177,6 @@ static int spi_imx_setupxfer(struct spi_device *spi,
else
spi_imx->usedma = 0;
- if (spi_imx->usedma) {
- ret = spi_imx_dma_configure(spi->master);
- if (ret)
- return ret;
- }
-
if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) {
spi_imx->rx = mx53_ecspi_rx_slave;
spi_imx->tx = mx53_ecspi_tx_slave;
@@ -1289,6 +1281,31 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
unsigned long timeout;
struct spi_master *master = spi_imx->bitbang.master;
struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
+ struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents);
+ unsigned int bytes_per_word, i;
+ int ret;
+
+ /* Get the right burst length from the last sg to ensure no tail data */
+ bytes_per_word = spi_imx_bytes_per_word(transfer->bits_per_word);
+ for (i = spi_imx->devtype_data->fifo_size / 2; i > 0; i--) {
+ if (!(sg_dma_len(last_sg) % (i * bytes_per_word)))
+ break;
+ }
+ /* Use 1 as wml in case no available burst length got */
+ if (i == 0)
+ i = 1;
+
+ spi_imx->wml = i;
+
+ ret = spi_imx_dma_configure(master);
+ if (ret)
+ return ret;
+
+ if (!spi_imx->devtype_data->setup_wml) {
+ dev_err(spi_imx->dev, "No setup_wml()?\n");
+ return -EINVAL;
+ }
+ spi_imx->devtype_data->setup_wml(spi_imx);
/*
* The TX DMA setup starts the transfer, so make sure RX is configured
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index e43842c7a31a..62a7b80801d2 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -12,6 +12,8 @@
#include "internals.h"
+#define SPI_MEM_MAX_BUSWIDTH 4
+
/**
* spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
* memory operation
@@ -149,6 +151,44 @@ static bool spi_mem_default_supports_op(struct spi_mem *mem,
}
EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
+static bool spi_mem_buswidth_is_valid(u8 buswidth)
+{
+ if (hweight8(buswidth) > 1 || buswidth > SPI_MEM_MAX_BUSWIDTH)
+ return false;
+
+ return true;
+}
+
+static int spi_mem_check_op(const struct spi_mem_op *op)
+{
+ if (!op->cmd.buswidth)
+ return -EINVAL;
+
+ if ((op->addr.nbytes && !op->addr.buswidth) ||
+ (op->dummy.nbytes && !op->dummy.buswidth) ||
+ (op->data.nbytes && !op->data.buswidth))
+ return -EINVAL;
+
+ if (!spi_mem_buswidth_is_valid(op->cmd.buswidth) ||
+ !spi_mem_buswidth_is_valid(op->addr.buswidth) ||
+ !spi_mem_buswidth_is_valid(op->dummy.buswidth) ||
+ !spi_mem_buswidth_is_valid(op->data.buswidth))
+ return -EINVAL;
+
+ return 0;
+}
+
+static bool spi_mem_internal_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ if (ctlr->mem_ops && ctlr->mem_ops->supports_op)
+ return ctlr->mem_ops->supports_op(mem, op);
+
+ return spi_mem_default_supports_op(mem, op);
+}
+
/**
* spi_mem_supports_op() - Check if a memory device and the controller it is
* connected to support a specific memory operation
@@ -166,12 +206,10 @@ EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
*/
bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
{
- struct spi_controller *ctlr = mem->spi->controller;
-
- if (ctlr->mem_ops && ctlr->mem_ops->supports_op)
- return ctlr->mem_ops->supports_op(mem, op);
+ if (spi_mem_check_op(op))
+ return false;
- return spi_mem_default_supports_op(mem, op);
+ return spi_mem_internal_supports_op(mem, op);
}
EXPORT_SYMBOL_GPL(spi_mem_supports_op);
@@ -196,7 +234,11 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
u8 *tmpbuf;
int ret;
- if (!spi_mem_supports_op(mem, op))
+ ret = spi_mem_check_op(op);
+ if (ret)
+ return ret;
+
+ if (!spi_mem_internal_supports_op(mem, op))
return -ENOTSUPP;
if (ctlr->mem_ops) {
@@ -346,10 +388,25 @@ EXPORT_SYMBOL_GPL(spi_mem_get_name);
int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
{
struct spi_controller *ctlr = mem->spi->controller;
+ size_t len;
+
+ len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
return ctlr->mem_ops->adjust_op_size(mem, op);
+ if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
+ if (len > spi_max_transfer_size(mem->spi))
+ return -EINVAL;
+
+ op->data.nbytes = min3((size_t)op->data.nbytes,
+ spi_max_transfer_size(mem->spi),
+ spi_max_message_size(mem->spi) -
+ len);
+ if (!op->data.nbytes)
+ return -EINVAL;
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 86bf45667a04..3dc31627c655 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -98,6 +98,7 @@ struct mtk_spi {
struct clk *parent_clk, *sel_clk, *spi_clk;
struct spi_transfer *cur_transfer;
u32 xfer_len;
+ u32 num_xfered;
struct scatterlist *tx_sgl, *rx_sgl;
u32 tx_sgl_len, rx_sgl_len;
const struct mtk_spi_compatible *dev_comp;
@@ -385,6 +386,7 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
mdata->cur_transfer = xfer;
mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, xfer->len);
+ mdata->num_xfered = 0;
mtk_spi_prepare_transfer(master, xfer);
mtk_spi_setup_packet(master);
@@ -415,6 +417,7 @@ static int mtk_spi_dma_transfer(struct spi_master *master,
mdata->tx_sgl_len = 0;
mdata->rx_sgl_len = 0;
mdata->cur_transfer = xfer;
+ mdata->num_xfered = 0;
mtk_spi_prepare_transfer(master, xfer);
@@ -482,7 +485,7 @@ static int mtk_spi_setup(struct spi_device *spi)
static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
{
- u32 cmd, reg_val, cnt, remainder;
+ u32 cmd, reg_val, cnt, remainder, len;
struct spi_master *master = dev_id;
struct mtk_spi *mdata = spi_master_get_devdata(master);
struct spi_transfer *trans = mdata->cur_transfer;
@@ -497,36 +500,38 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
if (trans->rx_buf) {
cnt = mdata->xfer_len / 4;
ioread32_rep(mdata->base + SPI_RX_DATA_REG,
- trans->rx_buf, cnt);
+ trans->rx_buf + mdata->num_xfered, cnt);
remainder = mdata->xfer_len % 4;
if (remainder > 0) {
reg_val = readl(mdata->base + SPI_RX_DATA_REG);
- memcpy(trans->rx_buf + (cnt * 4),
- &reg_val, remainder);
+ memcpy(trans->rx_buf +
+ mdata->num_xfered +
+ (cnt * 4),
+ &reg_val,
+ remainder);
}
}
- trans->len -= mdata->xfer_len;
- if (!trans->len) {
+ mdata->num_xfered += mdata->xfer_len;
+ if (mdata->num_xfered == trans->len) {
spi_finalize_current_transfer(master);
return IRQ_HANDLED;
}
- if (trans->tx_buf)
- trans->tx_buf += mdata->xfer_len;
- if (trans->rx_buf)
- trans->rx_buf += mdata->xfer_len;
-
- mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, trans->len);
+ len = trans->len - mdata->num_xfered;
+ mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
mtk_spi_setup_packet(master);
- cnt = trans->len / 4;
- iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf, cnt);
+ cnt = len / 4;
+ iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
+ trans->tx_buf + mdata->num_xfered, cnt);
- remainder = trans->len % 4;
+ remainder = len % 4;
if (remainder > 0) {
reg_val = 0;
- memcpy(&reg_val, trans->tx_buf + (cnt * 4), remainder);
+ memcpy(&reg_val,
+ trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+ remainder);
writel(reg_val, mdata->base + SPI_TX_DATA_REG);
}
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 508c61c669e7..f024c3fc3679 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -33,6 +33,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/gcd.h>
+#include <linux/iopoll.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
@@ -126,6 +127,7 @@ struct omap2_mcspi_regs {
};
struct omap2_mcspi {
+ struct completion txdone;
struct spi_master *master;
/* Virtual base address of the controller */
void __iomem *base;
@@ -135,6 +137,7 @@ struct omap2_mcspi {
struct device *dev;
struct omap2_mcspi_regs ctx;
int fifo_depth;
+ bool slave_aborted;
unsigned int pin_dir:1;
};
@@ -274,19 +277,23 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
}
}
-static void omap2_mcspi_set_master_mode(struct spi_master *master)
+static void omap2_mcspi_set_mode(struct spi_master *master)
{
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
u32 l;
/*
- * Setup when switching from (reset default) slave mode
- * to single-channel master mode
+ * Choose master or slave mode
*/
l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL);
- l &= ~(OMAP2_MCSPI_MODULCTRL_STEST | OMAP2_MCSPI_MODULCTRL_MS);
- l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
+ l &= ~(OMAP2_MCSPI_MODULCTRL_STEST);
+ if (spi_controller_is_slave(master)) {
+ l |= (OMAP2_MCSPI_MODULCTRL_MS);
+ } else {
+ l &= ~(OMAP2_MCSPI_MODULCTRL_MS);
+ l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
+ }
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l);
ctx->modulctrl = l;
@@ -299,7 +306,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
struct omap2_mcspi_cs *cs = spi->controller_state;
struct omap2_mcspi *mcspi;
unsigned int wcnt;
- int max_fifo_depth, fifo_depth, bytes_per_word;
+ int max_fifo_depth, bytes_per_word;
u32 chconf, xferlevel;
mcspi = spi_master_get_devdata(master);
@@ -315,10 +322,6 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
else
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
- fifo_depth = gcd(t->len, max_fifo_depth);
- if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
- goto disable_fifo;
-
wcnt = t->len / bytes_per_word;
if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
goto disable_fifo;
@@ -326,16 +329,17 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
xferlevel = wcnt << 16;
if (t->rx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFER;
- xferlevel |= (fifo_depth - 1) << 8;
+ xferlevel |= (bytes_per_word - 1) << 8;
}
+
if (t->tx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFET;
- xferlevel |= fifo_depth - 1;
+ xferlevel |= bytes_per_word - 1;
}
mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
mcspi_write_chconf0(spi, chconf);
- mcspi->fifo_depth = fifo_depth;
+ mcspi->fifo_depth = max_fifo_depth;
return;
}
@@ -353,18 +357,22 @@ disable_fifo:
static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
{
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!(readl_relaxed(reg) & bit)) {
- if (time_after(jiffies, timeout)) {
- if (!(readl_relaxed(reg) & bit))
- return -ETIMEDOUT;
- else
- return 0;
- }
- cpu_relax();
+ u32 val;
+
+ return readl_poll_timeout(reg, val, val & bit, 1, MSEC_PER_SEC);
+}
+
+static int mcspi_wait_for_completion(struct omap2_mcspi *mcspi,
+ struct completion *x)
+{
+ if (spi_controller_is_slave(mcspi->master)) {
+ if (wait_for_completion_interruptible(x) ||
+ mcspi->slave_aborted)
+ return -EINTR;
+ } else {
+ wait_for_completion(x);
}
+
return 0;
}
@@ -517,7 +525,12 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
dma_async_issue_pending(mcspi_dma->dma_rx);
omap2_mcspi_set_dma_req(spi, 1, 1);
- wait_for_completion(&mcspi_dma->dma_rx_completion);
+ ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_rx_completion);
+ if (ret || mcspi->slave_aborted) {
+ dmaengine_terminate_sync(mcspi_dma->dma_rx);
+ omap2_mcspi_set_dma_req(spi, 1, 0);
+ return 0;
+ }
for (x = 0; x < nb_sizes; x++)
kfree(sg_out[x]);
@@ -585,7 +598,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
struct dma_slave_config cfg;
enum dma_slave_buswidth width;
unsigned es;
- u32 burst;
void __iomem *chstat_reg;
void __iomem *irqstat_reg;
int wait_res;
@@ -605,34 +617,49 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
}
count = xfer->len;
- burst = 1;
-
- if (mcspi->fifo_depth > 0) {
- if (count > mcspi->fifo_depth)
- burst = mcspi->fifo_depth / es;
- else
- burst = count / es;
- }
memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
cfg.src_addr_width = width;
cfg.dst_addr_width = width;
- cfg.src_maxburst = burst;
- cfg.dst_maxburst = burst;
+ cfg.src_maxburst = es;
+ cfg.dst_maxburst = es;
rx = xfer->rx_buf;
tx = xfer->tx_buf;
- if (tx != NULL)
+ mcspi->slave_aborted = false;
+ reinit_completion(&mcspi_dma->dma_tx_completion);
+ reinit_completion(&mcspi_dma->dma_rx_completion);
+ reinit_completion(&mcspi->txdone);
+ if (tx) {
+ /* Enable EOW IRQ to know end of tx in slave mode */
+ if (spi_controller_is_slave(spi->master))
+ mcspi_write_reg(spi->master,
+ OMAP2_MCSPI_IRQENABLE,
+ OMAP2_MCSPI_IRQSTATUS_EOW);
omap2_mcspi_tx_dma(spi, xfer, cfg);
+ }
if (rx != NULL)
count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
if (tx != NULL) {
- wait_for_completion(&mcspi_dma->dma_tx_completion);
+ int ret;
+
+ ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_tx_completion);
+ if (ret || mcspi->slave_aborted) {
+ dmaengine_terminate_sync(mcspi_dma->dma_tx);
+ omap2_mcspi_set_dma_req(spi, 0, 0);
+ return 0;
+ }
+
+ if (spi_controller_is_slave(mcspi->master)) {
+ ret = mcspi_wait_for_completion(mcspi, &mcspi->txdone);
+ if (ret || mcspi->slave_aborted)
+ return 0;
+ }
if (mcspi->fifo_depth > 0) {
irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS;
@@ -1089,6 +1116,36 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
gpio_free(spi->cs_gpio);
}
+static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
+{
+ struct omap2_mcspi *mcspi = data;
+ u32 irqstat;
+
+ irqstat = mcspi_read_reg(mcspi->master, OMAP2_MCSPI_IRQSTATUS);
+ if (!irqstat)
+ return IRQ_NONE;
+
+ /* Disable IRQ and wakeup slave xfer task */
+ mcspi_write_reg(mcspi->master, OMAP2_MCSPI_IRQENABLE, 0);
+ if (irqstat & OMAP2_MCSPI_IRQSTATUS_EOW)
+ complete(&mcspi->txdone);
+
+ return IRQ_HANDLED;
+}
+
+static int omap2_mcspi_slave_abort(struct spi_master *master)
+{
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+ struct omap2_mcspi_dma *mcspi_dma = mcspi->dma_channels;
+
+ mcspi->slave_aborted = true;
+ complete(&mcspi_dma->dma_rx_completion);
+ complete(&mcspi_dma->dma_tx_completion);
+ complete(&mcspi->txdone);
+
+ return 0;
+}
+
static int omap2_mcspi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *t)
@@ -1255,10 +1312,20 @@ static bool omap2_mcspi_can_dma(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
+ struct omap2_mcspi_dma *mcspi_dma =
+ &mcspi->dma_channels[spi->chip_select];
+
+ if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx)
+ return false;
+
+ if (spi_controller_is_slave(master))
+ return true;
+
return (xfer->len >= DMA_MIN_BYTES);
}
-static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
+static int omap2_mcspi_controller_setup(struct omap2_mcspi *mcspi)
{
struct spi_master *master = mcspi->master;
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
@@ -1275,7 +1342,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
- omap2_mcspi_set_master_mode(master);
+ omap2_mcspi_set_mode(master);
pm_runtime_mark_last_busy(mcspi->dev);
pm_runtime_put_autosuspend(mcspi->dev);
return 0;
@@ -1350,11 +1417,12 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
- master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
- if (master == NULL) {
- dev_dbg(&pdev->dev, "master allocation failed\n");
+ if (of_property_read_bool(node, "spi-slave"))
+ master = spi_alloc_slave(&pdev->dev, sizeof(*mcspi));
+ else
+ master = spi_alloc_master(&pdev->dev, sizeof(*mcspi));
+ if (!master)
return -ENOMEM;
- }
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
@@ -1366,6 +1434,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
master->transfer_one = omap2_mcspi_transfer_one;
master->set_cs = omap2_mcspi_set_cs;
master->cleanup = omap2_mcspi_cleanup;
+ master->slave_abort = omap2_mcspi_slave_abort;
master->dev.of_node = node;
master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;
master->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15;
@@ -1417,15 +1486,31 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
sprintf(mcspi->dma_channels[i].dma_tx_ch_name, "tx%d", i);
}
+ status = platform_get_irq(pdev, 0);
+ if (status == -EPROBE_DEFER)
+ goto free_master;
+ if (status < 0) {
+ dev_err(&pdev->dev, "no irq resource found\n");
+ goto free_master;
+ }
+ init_completion(&mcspi->txdone);
+ status = devm_request_irq(&pdev->dev, status,
+ omap2_mcspi_irq_handler, 0, pdev->name,
+ mcspi);
+ if (status) {
+ dev_err(&pdev->dev, "Cannot request IRQ");
+ goto free_master;
+ }
+
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_enable(&pdev->dev);
- status = omap2_mcspi_master_setup(mcspi);
+ status = omap2_mcspi_controller_setup(mcspi);
if (status < 0)
goto disable_pm;
- status = devm_spi_register_master(&pdev->dev, master);
+ status = devm_spi_register_controller(&pdev->dev, master);
if (status < 0)
goto disable_pm;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 47ef6b1a2e76..7f280567093e 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -431,6 +431,7 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
int word_len;
struct orion_spi *orion_spi;
int cs = spi->chip_select;
+ void __iomem *vaddr;
word_len = spi->bits_per_word;
count = xfer->len;
@@ -441,8 +442,9 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
* Use SPI direct write mode if base address is available. Otherwise
* fall back to PIO mode for this transfer.
*/
- if ((orion_spi->child[cs].direct_access.vaddr) && (xfer->tx_buf) &&
- (word_len == 8)) {
+ vaddr = orion_spi->child[cs].direct_access.vaddr;
+
+ if (vaddr && xfer->tx_buf && word_len == 8) {
unsigned int cnt = count / 4;
unsigned int rem = count % 4;
@@ -450,13 +452,11 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
* Send the TX-data to the SPI device via the direct
* mapped address window
*/
- iowrite32_rep(orion_spi->child[cs].direct_access.vaddr,
- xfer->tx_buf, cnt);
+ iowrite32_rep(vaddr, xfer->tx_buf, cnt);
if (rem) {
u32 *buf = (u32 *)xfer->tx_buf;
- iowrite8_rep(orion_spi->child[cs].direct_access.vaddr,
- &buf[cnt], rem);
+ iowrite8_rep(vaddr, &buf[cnt], rem);
}
return count;
@@ -683,6 +683,7 @@ static int orion_spi_probe(struct platform_device *pdev)
}
for_each_available_child_of_node(pdev->dev.of_node, np) {
+ struct orion_direct_acc *dir_acc;
u32 cs;
int cs_gpio;
@@ -750,14 +751,13 @@ static int orion_spi_probe(struct platform_device *pdev)
* This needs to get extended for the direct SPI-NOR / SPI-NAND
* support, once this gets implemented.
*/
- spi->child[cs].direct_access.vaddr = devm_ioremap(&pdev->dev,
- r->start,
- PAGE_SIZE);
- if (!spi->child[cs].direct_access.vaddr) {
+ dir_acc = &spi->child[cs].direct_access;
+ dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE);
+ if (!dir_acc->vaddr) {
status = -ENOMEM;
goto out_rel_axi_clk;
}
- spi->child[cs].direct_access.size = PAGE_SIZE;
+ dir_acc->size = PAGE_SIZE;
dev_info(&pdev->dev, "CS%d configured for direct access\n", cs);
}
diff --git a/drivers/spi/spi-pic32-sqi.c b/drivers/spi/spi-pic32-sqi.c
index bd1c6b53283f..d7e4e18ec3df 100644
--- a/drivers/spi/spi-pic32-sqi.c
+++ b/drivers/spi/spi-pic32-sqi.c
@@ -468,7 +468,7 @@ static int ring_desc_ring_alloc(struct pic32_sqi *sqi)
/* allocate coherent DMAable memory for hardware buffer descriptors. */
sqi->bd = dma_zalloc_coherent(&sqi->master->dev,
sizeof(*bd) * PESQI_BD_COUNT,
- &sqi->bd_dma, GFP_DMA32);
+ &sqi->bd_dma, GFP_KERNEL);
if (!sqi->bd) {
dev_err(&sqi->master->dev, "failed allocating dma buffer\n");
return -ENOMEM;
@@ -656,7 +656,7 @@ static int pic32_sqi_probe(struct platform_device *pdev)
master->max_speed_hz = clk_get_rate(sqi->base_clk);
master->dma_alignment = 32;
master->max_dma_len = PESQI_BD_BUF_LEN_MAX;
- master->dev.of_node = of_node_get(pdev->dev.of_node);
+ master->dev.of_node = pdev->dev.of_node;
master->mode_bits = SPI_MODE_3 | SPI_MODE_0 | SPI_TX_DUAL |
SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD;
master->flags = SPI_MASTER_HALF_DUPLEX;
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index f8a45af1fa9f..131849adc570 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -320,7 +320,7 @@ static int pic32_spi_dma_transfer(struct pic32_spi *pic32s,
desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
xfer->rx_sg.sgl,
xfer->rx_sg.nents,
- DMA_FROM_DEVICE,
+ DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_rx) {
ret = -EINVAL;
@@ -330,7 +330,7 @@ static int pic32_spi_dma_transfer(struct pic32_spi *pic32s,
desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
xfer->tx_sg.sgl,
xfer->tx_sg.nents,
- DMA_TO_DEVICE,
+ DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_tx) {
ret = -EINVAL;
@@ -774,7 +774,7 @@ static int pic32_spi_probe(struct platform_device *pdev)
if (ret)
goto err_master;
- master->dev.of_node = of_node_get(pdev->dev.of_node);
+ master->dev.of_node = pdev->dev.of_node;
master->mode_bits = SPI_MODE_3 | SPI_MODE_0 | SPI_CS_HIGH;
master->num_chipselect = 1; /* single chip-select */
master->max_speed_hz = clk_get_rate(pic32s->clk);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 1af8c96b940e..6120e6abcd96 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1490,10 +1490,8 @@ static void do_polling_transfer(struct pl022 *pl022)
struct spi_message *message = NULL;
struct spi_transfer *transfer = NULL;
struct spi_transfer *previous = NULL;
- struct chip_data *chip;
unsigned long time, timeout;
- chip = pl022->cur_chip;
message = pl022->cur_msg;
while (message->state != STATE_DONE) {
@@ -2325,10 +2323,8 @@ static int pl022_suspend(struct device *dev)
int ret;
ret = spi_master_suspend(pl022->master);
- if (ret) {
- dev_warn(dev, "cannot suspend master\n");
+ if (ret)
return ret;
- }
ret = pm_runtime_force_suspend(dev);
if (ret) {
@@ -2353,9 +2349,7 @@ static int pl022_resume(struct device *dev)
/* Start the queue running */
ret = spi_master_resume(pl022->master);
- if (ret)
- dev_err(dev, "problem starting queue (%d)\n", ret);
- else
+ if (!ret)
dev_dbg(dev, "resumed\n");
return ret;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 14f4ea59caff..612cc49db28f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -33,6 +33,7 @@
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/acpi.h>
+#include <linux/of_device.h>
#include "spi-pxa2xx.h"
@@ -665,9 +666,11 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
bytes_left = drv_data->rx_end - drv_data->rx;
switch (drv_data->n_bytes) {
case 4:
- bytes_left >>= 1;
+ bytes_left >>= 2;
+ break;
case 2:
bytes_left >>= 1;
+ break;
}
rx_thre = pxa2xx_spi_get_rx_default_thre(drv_data);
@@ -1333,9 +1336,6 @@ static void cleanup(struct spi_device *spi)
kfree(chip);
}
-#ifdef CONFIG_PCI
-#ifdef CONFIG_ACPI
-
static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT33C0", LPSS_LPT_SSP },
{ "INT33C1", LPSS_LPT_SSP },
@@ -1347,23 +1347,6 @@ static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
-static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
-{
- unsigned int devid;
- int port_id = -1;
-
- if (adev && adev->pnp.unique_id &&
- !kstrtouint(adev->pnp.unique_id, 0, &devid))
- port_id = devid;
- return port_id;
-}
-#else /* !CONFIG_ACPI */
-static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
-{
- return -1;
-}
-#endif
-
/*
* PCI IDs of compound devices that integrate both host controller and private
* integrated DMA engine. Please note these are not used in module
@@ -1410,6 +1393,37 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
{ },
};
+static const struct of_device_id pxa2xx_spi_of_match[] = {
+ { .compatible = "marvell,mmp2-ssp", .data = (void *)MMP2_SSP },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match);
+
+#ifdef CONFIG_ACPI
+
+static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
+{
+ unsigned int devid;
+ int port_id = -1;
+
+ if (adev && adev->pnp.unique_id &&
+ !kstrtouint(adev->pnp.unique_id, 0, &devid))
+ port_id = devid;
+ return port_id;
+}
+
+#else /* !CONFIG_ACPI */
+
+static int pxa2xx_spi_get_port_id(struct acpi_device *adev)
+{
+ return -1;
+}
+
+#endif /* CONFIG_ACPI */
+
+
+#ifdef CONFIG_PCI
+
static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param)
{
struct device *dev = param;
@@ -1420,6 +1434,8 @@ static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param)
return true;
}
+#endif /* CONFIG_PCI */
+
static struct pxa2xx_spi_master *
pxa2xx_spi_init_pdata(struct platform_device *pdev)
{
@@ -1429,11 +1445,15 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
struct resource *res;
const struct acpi_device_id *adev_id = NULL;
const struct pci_device_id *pcidev_id = NULL;
- int type;
+ const struct of_device_id *of_id = NULL;
+ enum pxa_ssp_type type;
adev = ACPI_COMPANION(&pdev->dev);
- if (dev_is_pci(pdev->dev.parent))
+ if (pdev->dev.of_node)
+ of_id = of_match_device(pdev->dev.driver->of_match_table,
+ &pdev->dev);
+ else if (dev_is_pci(pdev->dev.parent))
pcidev_id = pci_match_id(pxa2xx_spi_pci_compound_match,
to_pci_dev(pdev->dev.parent));
else if (adev)
@@ -1443,9 +1463,11 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
return NULL;
if (adev_id)
- type = (int)adev_id->driver_data;
+ type = (enum pxa_ssp_type)adev_id->driver_data;
else if (pcidev_id)
- type = (int)pcidev_id->driver_data;
+ type = (enum pxa_ssp_type)pcidev_id->driver_data;
+ else if (of_id)
+ type = (enum pxa_ssp_type)of_id->data;
else
return NULL;
@@ -1464,11 +1486,13 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
if (IS_ERR(ssp->mmio_base))
return NULL;
+#ifdef CONFIG_PCI
if (pcidev_id) {
pdata->tx_param = pdev->dev.parent;
pdata->rx_param = pdev->dev.parent;
pdata->dma_filter = pxa2xx_spi_idma_filter;
}
+#endif
ssp->clk = devm_clk_get(&pdev->dev, NULL);
ssp->irq = platform_get_irq(pdev, 0);
@@ -1482,14 +1506,6 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
return pdata;
}
-#else /* !CONFIG_PCI */
-static inline struct pxa2xx_spi_master *
-pxa2xx_spi_init_pdata(struct platform_device *pdev)
-{
- return NULL;
-}
-#endif
-
static int pxa2xx_spi_fw_translate_cs(struct spi_controller *master,
unsigned int cs)
{
@@ -1764,14 +1780,6 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
return 0;
}
-static void pxa2xx_spi_shutdown(struct platform_device *pdev)
-{
- int status = 0;
-
- if ((status = pxa2xx_spi_remove(pdev)) != 0)
- dev_err(&pdev->dev, "shutdown failed with %d\n", status);
-}
-
#ifdef CONFIG_PM_SLEEP
static int pxa2xx_spi_suspend(struct device *dev)
{
@@ -1808,13 +1816,7 @@ static int pxa2xx_spi_resume(struct device *dev)
lpss_ssp_setup(drv_data);
/* Start the queue running */
- status = spi_controller_resume(drv_data->master);
- if (status != 0) {
- dev_err(dev, "problem starting queue (%d)\n", status);
- return status;
- }
-
- return 0;
+ return spi_controller_resume(drv_data->master);
}
#endif
@@ -1848,10 +1850,10 @@ static struct platform_driver driver = {
.name = "pxa2xx-spi",
.pm = &pxa2xx_spi_pm_ops,
.acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match),
+ .of_match_table = of_match_ptr(pxa2xx_spi_of_match),
},
.probe = pxa2xx_spi_probe,
.remove = pxa2xx_spi_remove,
- .shutdown = pxa2xx_spi_shutdown,
};
static int __init pxa2xx_spi_init(void)
diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
new file mode 100644
index 000000000000..b8163b40bb92
--- /dev/null
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+
+#define QSPI_NUM_CS 2
+#define QSPI_BYTES_PER_WORD 4
+
+#define MSTR_CONFIG 0x0000
+#define FULL_CYCLE_MODE BIT(3)
+#define FB_CLK_EN BIT(4)
+#define PIN_HOLDN BIT(6)
+#define PIN_WPN BIT(7)
+#define DMA_ENABLE BIT(8)
+#define BIG_ENDIAN_MODE BIT(9)
+#define SPI_MODE_MSK 0xc00
+#define SPI_MODE_SHFT 10
+#define CHIP_SELECT_NUM BIT(12)
+#define SBL_EN BIT(13)
+#define LPA_BASE_MSK 0x3c000
+#define LPA_BASE_SHFT 14
+#define TX_DATA_DELAY_MSK 0xc0000
+#define TX_DATA_DELAY_SHFT 18
+#define TX_CLK_DELAY_MSK 0x300000
+#define TX_CLK_DELAY_SHFT 20
+#define TX_CS_N_DELAY_MSK 0xc00000
+#define TX_CS_N_DELAY_SHFT 22
+#define TX_DATA_OE_DELAY_MSK 0x3000000
+#define TX_DATA_OE_DELAY_SHFT 24
+
+#define AHB_MASTER_CFG 0x0004
+#define HMEM_TYPE_START_MID_TRANS_MSK 0x7
+#define HMEM_TYPE_START_MID_TRANS_SHFT 0
+#define HMEM_TYPE_LAST_TRANS_MSK 0x38
+#define HMEM_TYPE_LAST_TRANS_SHFT 3
+#define USE_HMEMTYPE_LAST_ON_DESC_OR_CHAIN_MSK 0xc0
+#define USE_HMEMTYPE_LAST_ON_DESC_OR_CHAIN_SHFT 6
+#define HMEMTYPE_READ_TRANS_MSK 0x700
+#define HMEMTYPE_READ_TRANS_SHFT 8
+#define HSHARED BIT(11)
+#define HINNERSHARED BIT(12)
+
+#define MSTR_INT_EN 0x000C
+#define MSTR_INT_STATUS 0x0010
+#define RESP_FIFO_UNDERRUN BIT(0)
+#define RESP_FIFO_NOT_EMPTY BIT(1)
+#define RESP_FIFO_RDY BIT(2)
+#define HRESP_FROM_NOC_ERR BIT(3)
+#define WR_FIFO_EMPTY BIT(9)
+#define WR_FIFO_FULL BIT(10)
+#define WR_FIFO_OVERRUN BIT(11)
+#define TRANSACTION_DONE BIT(16)
+#define QSPI_ERR_IRQS (RESP_FIFO_UNDERRUN | HRESP_FROM_NOC_ERR | \
+ WR_FIFO_OVERRUN)
+#define QSPI_ALL_IRQS (QSPI_ERR_IRQS | RESP_FIFO_RDY | \
+ WR_FIFO_EMPTY | WR_FIFO_FULL | \
+ TRANSACTION_DONE)
+
+#define PIO_XFER_CTRL 0x0014
+#define REQUEST_COUNT_MSK 0xffff
+
+#define PIO_XFER_CFG 0x0018
+#define TRANSFER_DIRECTION BIT(0)
+#define MULTI_IO_MODE_MSK 0xe
+#define MULTI_IO_MODE_SHFT 1
+#define TRANSFER_FRAGMENT BIT(8)
+#define SDR_1BIT 1
+#define SDR_2BIT 2
+#define SDR_4BIT 3
+#define DDR_1BIT 5
+#define DDR_2BIT 6
+#define DDR_4BIT 7
+#define DMA_DESC_SINGLE_SPI 1
+#define DMA_DESC_DUAL_SPI 2
+#define DMA_DESC_QUAD_SPI 3
+
+#define PIO_XFER_STATUS 0x001c
+#define WR_FIFO_BYTES_MSK 0xffff0000
+#define WR_FIFO_BYTES_SHFT 16
+
+#define PIO_DATAOUT_1B 0x0020
+#define PIO_DATAOUT_4B 0x0024
+
+#define RD_FIFO_STATUS 0x002c
+#define FIFO_EMPTY BIT(11)
+#define WR_CNTS_MSK 0x7f0
+#define WR_CNTS_SHFT 4
+#define RDY_64BYTE BIT(3)
+#define RDY_32BYTE BIT(2)
+#define RDY_16BYTE BIT(1)
+#define FIFO_RDY BIT(0)
+
+#define RD_FIFO_CFG 0x0028
+#define CONTINUOUS_MODE BIT(0)
+
+#define RD_FIFO_RESET 0x0030
+#define RESET_FIFO BIT(0)
+
+#define CUR_MEM_ADDR 0x0048
+#define HW_VERSION 0x004c
+#define RD_FIFO 0x0050
+#define SAMPLING_CLK_CFG 0x0090
+#define SAMPLING_CLK_STATUS 0x0094
+
+
+enum qspi_dir {
+ QSPI_READ,
+ QSPI_WRITE,
+};
+
+struct qspi_xfer {
+ union {
+ const void *tx_buf;
+ void *rx_buf;
+ };
+ unsigned int rem_bytes;
+ unsigned int buswidth;
+ enum qspi_dir dir;
+ bool is_last;
+};
+
+enum qspi_clocks {
+ QSPI_CLK_CORE,
+ QSPI_CLK_IFACE,
+ QSPI_NUM_CLKS
+};
+
+struct qcom_qspi {
+ void __iomem *base;
+ struct device *dev;
+ struct clk_bulk_data clks[QSPI_NUM_CLKS];
+ struct qspi_xfer xfer;
+ /* Lock to protect data accessed by IRQs */
+ spinlock_t lock;
+};
+
+static u32 qspi_buswidth_to_iomode(struct qcom_qspi *ctrl,
+ unsigned int buswidth)
+{
+ switch (buswidth) {
+ case 1:
+ return SDR_1BIT << MULTI_IO_MODE_SHFT;
+ case 2:
+ return SDR_2BIT << MULTI_IO_MODE_SHFT;
+ case 4:
+ return SDR_4BIT << MULTI_IO_MODE_SHFT;
+ default:
+ dev_warn_once(ctrl->dev,
+ "Unexpected bus width: %u\n", buswidth);
+ return SDR_1BIT << MULTI_IO_MODE_SHFT;
+ }
+}
+
+static void qcom_qspi_pio_xfer_cfg(struct qcom_qspi *ctrl)
+{
+ u32 pio_xfer_cfg;
+ const struct qspi_xfer *xfer;
+
+ xfer = &ctrl->xfer;
+ pio_xfer_cfg = readl(ctrl->base + PIO_XFER_CFG);
+ pio_xfer_cfg &= ~TRANSFER_DIRECTION;
+ pio_xfer_cfg |= xfer->dir;
+ if (xfer->is_last)
+ pio_xfer_cfg &= ~TRANSFER_FRAGMENT;
+ else
+ pio_xfer_cfg |= TRANSFER_FRAGMENT;
+ pio_xfer_cfg &= ~MULTI_IO_MODE_MSK;
+ pio_xfer_cfg |= qspi_buswidth_to_iomode(ctrl, xfer->buswidth);
+
+ writel(pio_xfer_cfg, ctrl->base + PIO_XFER_CFG);
+}
+
+static void qcom_qspi_pio_xfer_ctrl(struct qcom_qspi *ctrl)
+{
+ u32 pio_xfer_ctrl;
+
+ pio_xfer_ctrl = readl(ctrl->base + PIO_XFER_CTRL);
+ pio_xfer_ctrl &= ~REQUEST_COUNT_MSK;
+ pio_xfer_ctrl |= ctrl->xfer.rem_bytes;
+ writel(pio_xfer_ctrl, ctrl->base + PIO_XFER_CTRL);
+}
+
+static void qcom_qspi_pio_xfer(struct qcom_qspi *ctrl)
+{
+ u32 ints;
+
+ qcom_qspi_pio_xfer_cfg(ctrl);
+
+ /* Ack any previous interrupts that might be hanging around */
+ writel(QSPI_ALL_IRQS, ctrl->base + MSTR_INT_STATUS);
+
+ /* Setup new interrupts */
+ if (ctrl->xfer.dir == QSPI_WRITE)
+ ints = QSPI_ERR_IRQS | WR_FIFO_EMPTY;
+ else
+ ints = QSPI_ERR_IRQS | RESP_FIFO_RDY;
+ writel(ints, ctrl->base + MSTR_INT_EN);
+
+ /* Kick off the transfer */
+ qcom_qspi_pio_xfer_ctrl(ctrl);
+}
+
+static void qcom_qspi_handle_err(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl->lock, flags);
+ writel(0, ctrl->base + MSTR_INT_EN);
+ ctrl->xfer.rem_bytes = 0;
+ spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static int qcom_qspi_transfer_one(struct spi_master *master,
+ struct spi_device *slv,
+ struct spi_transfer *xfer)
+{
+ struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+ int ret;
+ unsigned long speed_hz;
+ unsigned long flags;
+
+ speed_hz = slv->max_speed_hz;
+ if (xfer->speed_hz)
+ speed_hz = xfer->speed_hz;
+
+ /* In regular operation (SBL_EN=1) core must be 4x transfer clock */
+ ret = clk_set_rate(ctrl->clks[QSPI_CLK_CORE].clk, speed_hz * 4);
+ if (ret) {
+ dev_err(ctrl->dev, "Failed to set core clk %d\n", ret);
+ return ret;
+ }
+
+ spin_lock_irqsave(&ctrl->lock, flags);
+
+ /* We are half duplex, so either rx or tx will be set */
+ if (xfer->rx_buf) {
+ ctrl->xfer.dir = QSPI_READ;
+ ctrl->xfer.buswidth = xfer->rx_nbits;
+ ctrl->xfer.rx_buf = xfer->rx_buf;
+ } else {
+ ctrl->xfer.dir = QSPI_WRITE;
+ ctrl->xfer.buswidth = xfer->tx_nbits;
+ ctrl->xfer.tx_buf = xfer->tx_buf;
+ }
+ ctrl->xfer.is_last = list_is_last(&xfer->transfer_list,
+ &master->cur_msg->transfers);
+ ctrl->xfer.rem_bytes = xfer->len;
+ qcom_qspi_pio_xfer(ctrl);
+
+ spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ /* We'll call spi_finalize_current_transfer() when done */
+ return 1;
+}
+
+static int qcom_qspi_prepare_message(struct spi_master *master,
+ struct spi_message *message)
+{
+ u32 mstr_cfg;
+ struct qcom_qspi *ctrl;
+ int tx_data_oe_delay = 1;
+ int tx_data_delay = 1;
+ unsigned long flags;
+
+ ctrl = spi_master_get_devdata(master);
+ spin_lock_irqsave(&ctrl->lock, flags);
+
+ mstr_cfg = readl(ctrl->base + MSTR_CONFIG);
+ mstr_cfg &= ~CHIP_SELECT_NUM;
+ if (message->spi->chip_select)
+ mstr_cfg |= CHIP_SELECT_NUM;
+
+ mstr_cfg |= FB_CLK_EN | PIN_WPN | PIN_HOLDN | SBL_EN | FULL_CYCLE_MODE;
+ mstr_cfg &= ~(SPI_MODE_MSK | TX_DATA_OE_DELAY_MSK | TX_DATA_DELAY_MSK);
+ mstr_cfg |= message->spi->mode << SPI_MODE_SHFT;
+ mstr_cfg |= tx_data_oe_delay << TX_DATA_OE_DELAY_SHFT;
+ mstr_cfg |= tx_data_delay << TX_DATA_DELAY_SHFT;
+ mstr_cfg &= ~DMA_ENABLE;
+
+ writel(mstr_cfg, ctrl->base + MSTR_CONFIG);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ return 0;
+}
+
+static irqreturn_t pio_read(struct qcom_qspi *ctrl)
+{
+ u32 rd_fifo_status;
+ u32 rd_fifo;
+ unsigned int wr_cnts;
+ unsigned int bytes_to_read;
+ unsigned int words_to_read;
+ u32 *word_buf;
+ u8 *byte_buf;
+ int i;
+
+ rd_fifo_status = readl(ctrl->base + RD_FIFO_STATUS);
+
+ if (!(rd_fifo_status & FIFO_RDY)) {
+ dev_dbg(ctrl->dev, "Spurious IRQ %#x\n", rd_fifo_status);
+ return IRQ_NONE;
+ }
+
+ wr_cnts = (rd_fifo_status & WR_CNTS_MSK) >> WR_CNTS_SHFT;
+ wr_cnts = min(wr_cnts, ctrl->xfer.rem_bytes);
+
+ words_to_read = wr_cnts / QSPI_BYTES_PER_WORD;
+ bytes_to_read = wr_cnts % QSPI_BYTES_PER_WORD;
+
+ if (words_to_read) {
+ word_buf = ctrl->xfer.rx_buf;
+ ctrl->xfer.rem_bytes -= words_to_read * QSPI_BYTES_PER_WORD;
+ ioread32_rep(ctrl->base + RD_FIFO, word_buf, words_to_read);
+ ctrl->xfer.rx_buf = word_buf + words_to_read;
+ }
+
+ if (bytes_to_read) {
+ byte_buf = ctrl->xfer.rx_buf;
+ rd_fifo = readl(ctrl->base + RD_FIFO);
+ ctrl->xfer.rem_bytes -= bytes_to_read;
+ for (i = 0; i < bytes_to_read; i++)
+ *byte_buf++ = rd_fifo >> (i * BITS_PER_BYTE);
+ ctrl->xfer.rx_buf = byte_buf;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pio_write(struct qcom_qspi *ctrl)
+{
+ const void *xfer_buf = ctrl->xfer.tx_buf;
+ const int *word_buf;
+ const char *byte_buf;
+ unsigned int wr_fifo_bytes;
+ unsigned int wr_fifo_words;
+ unsigned int wr_size;
+ unsigned int rem_words;
+
+ wr_fifo_bytes = readl(ctrl->base + PIO_XFER_STATUS);
+ wr_fifo_bytes >>= WR_FIFO_BYTES_SHFT;
+
+ if (ctrl->xfer.rem_bytes < QSPI_BYTES_PER_WORD) {
+ /* Process the last 1-3 bytes */
+ wr_size = min(wr_fifo_bytes, ctrl->xfer.rem_bytes);
+ ctrl->xfer.rem_bytes -= wr_size;
+
+ byte_buf = xfer_buf;
+ while (wr_size--)
+ writel(*byte_buf++,
+ ctrl->base + PIO_DATAOUT_1B);
+ ctrl->xfer.tx_buf = byte_buf;
+ } else {
+ /*
+ * Process all the whole words; to keep things simple we'll
+ * just wait for the next interrupt to handle the last 1-3
+ * bytes if we don't have an even number of words.
+ */
+ rem_words = ctrl->xfer.rem_bytes / QSPI_BYTES_PER_WORD;
+ wr_fifo_words = wr_fifo_bytes / QSPI_BYTES_PER_WORD;
+
+ wr_size = min(rem_words, wr_fifo_words);
+ ctrl->xfer.rem_bytes -= wr_size * QSPI_BYTES_PER_WORD;
+
+ word_buf = xfer_buf;
+ iowrite32_rep(ctrl->base + PIO_DATAOUT_4B, word_buf, wr_size);
+ ctrl->xfer.tx_buf = word_buf + wr_size;
+
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
+{
+ u32 int_status;
+ struct qcom_qspi *ctrl = dev_id;
+ irqreturn_t ret = IRQ_NONE;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl->lock, flags);
+
+ int_status = readl(ctrl->base + MSTR_INT_STATUS);
+ writel(int_status, ctrl->base + MSTR_INT_STATUS);
+
+ if (ctrl->xfer.dir == QSPI_WRITE) {
+ if (int_status & WR_FIFO_EMPTY)
+ ret = pio_write(ctrl);
+ } else {
+ if (int_status & RESP_FIFO_RDY)
+ ret = pio_read(ctrl);
+ }
+
+ if (int_status & QSPI_ERR_IRQS) {
+ if (int_status & RESP_FIFO_UNDERRUN)
+ dev_err(ctrl->dev, "IRQ error: FIFO underrun\n");
+ if (int_status & WR_FIFO_OVERRUN)
+ dev_err(ctrl->dev, "IRQ error: FIFO overrun\n");
+ if (int_status & HRESP_FROM_NOC_ERR)
+ dev_err(ctrl->dev, "IRQ error: NOC response error\n");
+ ret = IRQ_HANDLED;
+ }
+
+ if (!ctrl->xfer.rem_bytes) {
+ writel(0, ctrl->base + MSTR_INT_EN);
+ spi_finalize_current_transfer(dev_get_drvdata(ctrl->dev));
+ }
+
+ spin_unlock_irqrestore(&ctrl->lock, flags);
+ return ret;
+}
+
+static int qcom_qspi_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev;
+ struct resource *res;
+ struct spi_master *master;
+ struct qcom_qspi *ctrl;
+
+ dev = &pdev->dev;
+
+ master = spi_alloc_master(dev, sizeof(*ctrl));
+ if (!master)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, master);
+
+ ctrl = spi_master_get_devdata(master);
+
+ spin_lock_init(&ctrl->lock);
+ ctrl->dev = dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctrl->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctrl->base)) {
+ ret = PTR_ERR(ctrl->base);
+ goto exit_probe_master_put;
+ }
+
+ ctrl->clks[QSPI_CLK_CORE].id = "core";
+ ctrl->clks[QSPI_CLK_IFACE].id = "iface";
+ ret = devm_clk_bulk_get(dev, QSPI_NUM_CLKS, ctrl->clks);
+ if (ret)
+ goto exit_probe_master_put;
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get irq %d\n", ret);
+ goto exit_probe_master_put;
+ }
+ ret = devm_request_irq(dev, ret, qcom_qspi_irq,
+ IRQF_TRIGGER_HIGH, dev_name(dev), ctrl);
+ if (ret) {
+ dev_err(dev, "Failed to request irq %d\n", ret);
+ goto exit_probe_master_put;
+ }
+
+ master->max_speed_hz = 300000000;
+ master->num_chipselect = QSPI_NUM_CS;
+ master->bus_num = -1;
+ master->dev.of_node = pdev->dev.of_node;
+ master->mode_bits = SPI_MODE_0 |
+ SPI_TX_DUAL | SPI_RX_DUAL |
+ SPI_TX_QUAD | SPI_RX_QUAD;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->prepare_message = qcom_qspi_prepare_message;
+ master->transfer_one = qcom_qspi_transfer_one;
+ master->handle_err = qcom_qspi_handle_err;
+ master->auto_runtime_pm = true;
+
+ pm_runtime_enable(dev);
+
+ ret = spi_register_master(master);
+ if (!ret)
+ return 0;
+
+ pm_runtime_disable(dev);
+
+exit_probe_master_put:
+ spi_master_put(master);
+
+ return ret;
+}
+
+static int qcom_qspi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+
+ /* Unregister _before_ disabling pm_runtime() so we stop transfers */
+ spi_unregister_master(master);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qspi_runtime_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+
+ clk_bulk_disable_unprepare(QSPI_NUM_CLKS, ctrl->clks);
+
+ return 0;
+}
+
+static int __maybe_unused qcom_qspi_runtime_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+
+ return clk_bulk_prepare_enable(QSPI_NUM_CLKS, ctrl->clks);
+}
+
+static int __maybe_unused qcom_qspi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ int ret;
+
+ ret = spi_master_suspend(master);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_force_suspend(dev);
+ if (ret)
+ spi_master_resume(master);
+
+ return ret;
+}
+
+static int __maybe_unused qcom_qspi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ ret = spi_master_resume(master);
+ if (ret)
+ pm_runtime_force_suspend(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops qcom_qspi_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_qspi_runtime_suspend,
+ qcom_qspi_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(qcom_qspi_suspend, qcom_qspi_resume)
+};
+
+static const struct of_device_id qcom_qspi_dt_match[] = {
+ { .compatible = "qcom,qspi-v1", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_qspi_dt_match);
+
+static struct platform_driver qcom_qspi_driver = {
+ .driver = {
+ .name = "qcom_qspi",
+ .pm = &qcom_qspi_dev_pm_ops,
+ .of_match_table = qcom_qspi_dt_match,
+ },
+ .probe = qcom_qspi_probe,
+ .remove = qcom_qspi_remove,
+};
+module_platform_driver(qcom_qspi_driver);
+
+MODULE_DESCRIPTION("SPI driver for QSPI cores");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-rb4xx.c b/drivers/spi/spi-rb4xx.c
index 3641d0e20135..fbbf9a188247 100644
--- a/drivers/spi/spi-rb4xx.c
+++ b/drivers/spi/spi-rb4xx.c
@@ -159,7 +159,7 @@ static int rb4xx_spi_probe(struct platform_device *pdev)
master->bus_num = 0;
master->num_chipselect = 3;
master->mode_bits = SPI_TX_DUAL;
- master->bits_per_word_mask = BIT(7);
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
master->flags = SPI_MASTER_MUST_TX;
master->transfer_one = rb4xx_transfer_one;
master->set_cs = rb4xx_set_cs;
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index fdcf3076681b..51ef632bca52 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -164,7 +164,6 @@ enum rockchip_ssi_type {
struct rockchip_spi_dma_data {
struct dma_chan *ch;
- enum dma_transfer_direction direction;
dma_addr_t addr;
};
@@ -202,12 +201,11 @@ struct rockchip_spi {
bool cs_asserted[ROCKCHIP_SPI_MAX_CS_NUM];
- u32 use_dma;
+ bool use_dma;
struct sg_table tx_sg;
struct sg_table rx_sg;
struct rockchip_spi_dma_data dma_rx;
struct rockchip_spi_dma_data dma_tx;
- struct dma_slave_caps dma_caps;
};
static inline void spi_enable_chip(struct rockchip_spi *rs, int enable)
@@ -381,6 +379,8 @@ static int rockchip_spi_pio_transfer(struct rockchip_spi *rs)
{
int remain = 0;
+ spi_enable_chip(rs, 1);
+
do {
if (rs->tx) {
remain = rs->tx_end - rs->tx;
@@ -445,6 +445,9 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
struct dma_slave_config rxconf, txconf;
struct dma_async_tx_descriptor *rxdesc, *txdesc;
+ memset(&rxconf, 0, sizeof(rxconf));
+ memset(&txconf, 0, sizeof(txconf));
+
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
rs->state &= ~TXBUSY;
@@ -452,19 +455,16 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
rxdesc = NULL;
if (rs->rx) {
- rxconf.direction = rs->dma_rx.direction;
+ rxconf.direction = DMA_DEV_TO_MEM;
rxconf.src_addr = rs->dma_rx.addr;
rxconf.src_addr_width = rs->n_bytes;
- if (rs->dma_caps.max_burst > 4)
- rxconf.src_maxburst = 4;
- else
- rxconf.src_maxburst = 1;
+ rxconf.src_maxburst = 1;
dmaengine_slave_config(rs->dma_rx.ch, &rxconf);
rxdesc = dmaengine_prep_slave_sg(
rs->dma_rx.ch,
rs->rx_sg.sgl, rs->rx_sg.nents,
- rs->dma_rx.direction, DMA_PREP_INTERRUPT);
+ DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
if (!rxdesc)
return -EINVAL;
@@ -474,19 +474,16 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
txdesc = NULL;
if (rs->tx) {
- txconf.direction = rs->dma_tx.direction;
+ txconf.direction = DMA_MEM_TO_DEV;
txconf.dst_addr = rs->dma_tx.addr;
txconf.dst_addr_width = rs->n_bytes;
- if (rs->dma_caps.max_burst > 4)
- txconf.dst_maxburst = 4;
- else
- txconf.dst_maxburst = 1;
+ txconf.dst_maxburst = rs->fifo_len / 2;
dmaengine_slave_config(rs->dma_tx.ch, &txconf);
txdesc = dmaengine_prep_slave_sg(
rs->dma_tx.ch,
rs->tx_sg.sgl, rs->tx_sg.nents,
- rs->dma_tx.direction, DMA_PREP_INTERRUPT);
+ DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
if (!txdesc) {
if (rxdesc)
dmaengine_terminate_sync(rs->dma_rx.ch);
@@ -506,6 +503,8 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
dma_async_issue_pending(rs->dma_rx.ch);
}
+ spi_enable_chip(rs, 1);
+
if (txdesc) {
spin_lock_irqsave(&rs->lock, flags);
rs->state |= TXBUSY;
@@ -514,7 +513,8 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
dma_async_issue_pending(rs->dma_tx.ch);
}
- return 0;
+ /* 1 means the transfer is in progress */
+ return 1;
}
static void rockchip_spi_config(struct rockchip_spi *rs)
@@ -578,7 +578,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_TXFTLR);
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
- writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMATDLR);
+ writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
@@ -597,7 +597,6 @@ static int rockchip_spi_transfer_one(
struct spi_device *spi,
struct spi_transfer *xfer)
{
- int ret = 0;
struct rockchip_spi *rs = spi_master_get_devdata(master);
WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) &&
@@ -635,30 +634,16 @@ static int rockchip_spi_transfer_one(
/* we need prepare dma before spi was enabled */
if (master->can_dma && master->can_dma(master, spi, xfer))
- rs->use_dma = 1;
+ rs->use_dma = true;
else
- rs->use_dma = 0;
+ rs->use_dma = false;
rockchip_spi_config(rs);
- if (rs->use_dma) {
- if (rs->tmode == CR0_XFM_RO) {
- /* rx: dma must be prepared first */
- ret = rockchip_spi_prepare_dma(rs);
- spi_enable_chip(rs, 1);
- } else {
- /* tx or tr: spi must be enabled first */
- spi_enable_chip(rs, 1);
- ret = rockchip_spi_prepare_dma(rs);
- }
- /* successful DMA prepare means the transfer is in progress */
- ret = ret ? ret : 1;
- } else {
- spi_enable_chip(rs, 1);
- ret = rockchip_spi_pio_transfer(rs);
- }
+ if (rs->use_dma)
+ return rockchip_spi_prepare_dma(rs);
- return ret;
+ return rockchip_spi_pio_transfer(rs);
}
static bool rockchip_spi_can_dma(struct spi_master *master,
@@ -780,11 +765,8 @@ static int rockchip_spi_probe(struct platform_device *pdev)
}
if (rs->dma_tx.ch && rs->dma_rx.ch) {
- dma_get_slave_caps(rs->dma_rx.ch, &(rs->dma_caps));
rs->dma_tx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_TXDR);
rs->dma_rx.addr = (dma_addr_t)(mem->start + ROCKCHIP_SPI_RXDR);
- rs->dma_tx.direction = DMA_MEM_TO_DEV;
- rs->dma_rx.direction = DMA_DEV_TO_MEM;
master->can_dma = rockchip_spi_can_dma;
master->dma_tx = rs->dma_tx.ch;
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index b37de1d991d6..55f8e55327b3 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SH RSPI driver
*
@@ -6,15 +7,6 @@
*
* Based on spi-sh.c:
* Copyright (C) 2011 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/module.h>
diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c
index 20e800e70442..dc0926e43665 100644
--- a/drivers/spi/spi-sh-hspi.c
+++ b/drivers/spi/spi-sh-hspi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SuperH HSPI bus driver
*
@@ -7,15 +8,6 @@
* Based on pxa2xx_spi.c:
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/clk.h>
@@ -316,6 +308,6 @@ static struct platform_driver hspi_driver = {
module_platform_driver(hspi_driver);
MODULE_DESCRIPTION("SuperH HSPI bus driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
MODULE_ALIAS("platform:sh-hspi");
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 101cd6aae2ea..adf384323934 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SuperH MSIOF SPI Master Interface
*
* Copyright (c) 2009 Magnus Damm
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2014-2017 Glider bvba
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/bitmap.h>
@@ -1343,8 +1339,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
i = platform_get_irq(pdev, 0);
if (i < 0) {
- dev_err(&pdev->dev, "cannot get platform IRQ\n");
- ret = -ENOENT;
+ dev_err(&pdev->dev, "cannot get IRQ\n");
+ ret = i;
goto err1;
}
diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
index 50e0ea9acf8b..f1ee58208216 100644
--- a/drivers/spi/spi-sh.c
+++ b/drivers/spi/spi-sh.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SH SPI bus driver
*
@@ -5,15 +6,6 @@
*
* Based on pxa2xx_spi.c:
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/module.h>
@@ -522,6 +514,6 @@ static struct platform_driver spi_sh_driver = {
module_platform_driver(spi_sh_driver);
MODULE_DESCRIPTION("SH SPI bus driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Yoshihiro Shimoda");
MODULE_ALIAS("platform:sh_spi");
diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c
new file mode 100644
index 000000000000..d1075433f6a6
--- /dev/null
+++ b/drivers/spi/spi-slave-mt27xx.c
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 MediaTek Inc.
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+
+#define SPIS_IRQ_EN_REG 0x0
+#define SPIS_IRQ_CLR_REG 0x4
+#define SPIS_IRQ_ST_REG 0x8
+#define SPIS_IRQ_MASK_REG 0xc
+#define SPIS_CFG_REG 0x10
+#define SPIS_RX_DATA_REG 0x14
+#define SPIS_TX_DATA_REG 0x18
+#define SPIS_RX_DST_REG 0x1c
+#define SPIS_TX_SRC_REG 0x20
+#define SPIS_DMA_CFG_REG 0x30
+#define SPIS_SOFT_RST_REG 0x40
+
+/* SPIS_IRQ_EN_REG */
+#define DMA_DONE_EN BIT(7)
+#define DATA_DONE_EN BIT(2)
+#define RSTA_DONE_EN BIT(1)
+#define CMD_INVALID_EN BIT(0)
+
+/* SPIS_IRQ_ST_REG */
+#define DMA_DONE_ST BIT(7)
+#define DATA_DONE_ST BIT(2)
+#define RSTA_DONE_ST BIT(1)
+#define CMD_INVALID_ST BIT(0)
+
+/* SPIS_IRQ_MASK_REG */
+#define DMA_DONE_MASK BIT(7)
+#define DATA_DONE_MASK BIT(2)
+#define RSTA_DONE_MASK BIT(1)
+#define CMD_INVALID_MASK BIT(0)
+
+/* SPIS_CFG_REG */
+#define SPIS_TX_ENDIAN BIT(7)
+#define SPIS_RX_ENDIAN BIT(6)
+#define SPIS_TXMSBF BIT(5)
+#define SPIS_RXMSBF BIT(4)
+#define SPIS_CPHA BIT(3)
+#define SPIS_CPOL BIT(2)
+#define SPIS_TX_EN BIT(1)
+#define SPIS_RX_EN BIT(0)
+
+/* SPIS_DMA_CFG_REG */
+#define TX_DMA_TRIG_EN BIT(31)
+#define TX_DMA_EN BIT(30)
+#define RX_DMA_EN BIT(29)
+#define TX_DMA_LEN 0xfffff
+
+/* SPIS_SOFT_RST_REG */
+#define SPIS_DMA_ADDR_EN BIT(1)
+#define SPIS_SOFT_RST BIT(0)
+
+#define MTK_SPI_SLAVE_MAX_FIFO_SIZE 512U
+
+struct mtk_spi_slave {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *spi_clk;
+ struct completion xfer_done;
+ struct spi_transfer *cur_transfer;
+ bool slave_aborted;
+};
+
+static const struct of_device_id mtk_spi_slave_of_match[] = {
+ { .compatible = "mediatek,mt2712-spi-slave", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mtk_spi_slave_of_match);
+
+static void mtk_spi_slave_disable_dma(struct mtk_spi_slave *mdata)
+{
+ u32 reg_val;
+
+ reg_val = readl(mdata->base + SPIS_DMA_CFG_REG);
+ reg_val &= ~RX_DMA_EN;
+ reg_val &= ~TX_DMA_EN;
+ writel(reg_val, mdata->base + SPIS_DMA_CFG_REG);
+}
+
+static void mtk_spi_slave_disable_xfer(struct mtk_spi_slave *mdata)
+{
+ u32 reg_val;
+
+ reg_val = readl(mdata->base + SPIS_CFG_REG);
+ reg_val &= ~SPIS_TX_EN;
+ reg_val &= ~SPIS_RX_EN;
+ writel(reg_val, mdata->base + SPIS_CFG_REG);
+}
+
+static int mtk_spi_slave_wait_for_completion(struct mtk_spi_slave *mdata)
+{
+ if (wait_for_completion_interruptible(&mdata->xfer_done) ||
+ mdata->slave_aborted) {
+ dev_err(mdata->dev, "interrupted\n");
+ return -EINTR;
+ }
+
+ return 0;
+}
+
+static int mtk_spi_slave_prepare_message(struct spi_controller *ctlr,
+ struct spi_message *msg)
+{
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ struct spi_device *spi = msg->spi;
+ bool cpha, cpol;
+ u32 reg_val;
+
+ cpha = spi->mode & SPI_CPHA ? 1 : 0;
+ cpol = spi->mode & SPI_CPOL ? 1 : 0;
+
+ reg_val = readl(mdata->base + SPIS_CFG_REG);
+ if (cpha)
+ reg_val |= SPIS_CPHA;
+ else
+ reg_val &= ~SPIS_CPHA;
+ if (cpol)
+ reg_val |= SPIS_CPOL;
+ else
+ reg_val &= ~SPIS_CPOL;
+
+ if (spi->mode & SPI_LSB_FIRST)
+ reg_val &= ~(SPIS_TXMSBF | SPIS_RXMSBF);
+ else
+ reg_val |= SPIS_TXMSBF | SPIS_RXMSBF;
+
+ reg_val &= ~SPIS_TX_ENDIAN;
+ reg_val &= ~SPIS_RX_ENDIAN;
+ writel(reg_val, mdata->base + SPIS_CFG_REG);
+
+ return 0;
+}
+
+static int mtk_spi_slave_fifo_transfer(struct spi_controller *ctlr,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ int reg_val, cnt, remainder, ret;
+
+ writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG);
+
+ reg_val = readl(mdata->base + SPIS_CFG_REG);
+ if (xfer->rx_buf)
+ reg_val |= SPIS_RX_EN;
+ if (xfer->tx_buf)
+ reg_val |= SPIS_TX_EN;
+ writel(reg_val, mdata->base + SPIS_CFG_REG);
+
+ cnt = xfer->len / 4;
+ if (xfer->tx_buf)
+ iowrite32_rep(mdata->base + SPIS_TX_DATA_REG,
+ xfer->tx_buf, cnt);
+
+ remainder = xfer->len % 4;
+ if (xfer->tx_buf && remainder > 0) {
+ reg_val = 0;
+ memcpy(&reg_val, xfer->tx_buf + cnt * 4, remainder);
+ writel(reg_val, mdata->base + SPIS_TX_DATA_REG);
+ }
+
+ ret = mtk_spi_slave_wait_for_completion(mdata);
+ if (ret) {
+ mtk_spi_slave_disable_xfer(mdata);
+ writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG);
+ }
+
+ return ret;
+}
+
+static int mtk_spi_slave_dma_transfer(struct spi_controller *ctlr,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ struct device *dev = mdata->dev;
+ int reg_val, ret;
+
+ writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG);
+
+ if (xfer->tx_buf) {
+ /* tx_buf is a const void* where we need a void * for
+ * the dma mapping
+ */
+ void *nonconst_tx = (void *)xfer->tx_buf;
+
+ xfer->tx_dma = dma_map_single(dev, nonconst_tx,
+ xfer->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, xfer->tx_dma)) {
+ ret = -ENOMEM;
+ goto disable_transfer;
+ }
+ }
+
+ if (xfer->rx_buf) {
+ xfer->rx_dma = dma_map_single(dev, xfer->rx_buf,
+ xfer->len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, xfer->rx_dma)) {
+ ret = -ENOMEM;
+ goto unmap_txdma;
+ }
+ }
+
+ writel(xfer->tx_dma, mdata->base + SPIS_TX_SRC_REG);
+ writel(xfer->rx_dma, mdata->base + SPIS_RX_DST_REG);
+
+ writel(SPIS_DMA_ADDR_EN, mdata->base + SPIS_SOFT_RST_REG);
+
+ /* enable config reg tx rx_enable */
+ reg_val = readl(mdata->base + SPIS_CFG_REG);
+ if (xfer->tx_buf)
+ reg_val |= SPIS_TX_EN;
+ if (xfer->rx_buf)
+ reg_val |= SPIS_RX_EN;
+ writel(reg_val, mdata->base + SPIS_CFG_REG);
+
+ /* config dma */
+ reg_val = 0;
+ reg_val |= (xfer->len - 1) & TX_DMA_LEN;
+ writel(reg_val, mdata->base + SPIS_DMA_CFG_REG);
+
+ reg_val = readl(mdata->base + SPIS_DMA_CFG_REG);
+ if (xfer->tx_buf)
+ reg_val |= TX_DMA_EN;
+ if (xfer->rx_buf)
+ reg_val |= RX_DMA_EN;
+ reg_val |= TX_DMA_TRIG_EN;
+ writel(reg_val, mdata->base + SPIS_DMA_CFG_REG);
+
+ ret = mtk_spi_slave_wait_for_completion(mdata);
+ if (ret)
+ goto unmap_rxdma;
+
+ return 0;
+
+unmap_rxdma:
+ if (xfer->rx_buf)
+ dma_unmap_single(dev, xfer->rx_dma,
+ xfer->len, DMA_FROM_DEVICE);
+
+unmap_txdma:
+ if (xfer->tx_buf)
+ dma_unmap_single(dev, xfer->tx_dma,
+ xfer->len, DMA_TO_DEVICE);
+
+disable_transfer:
+ mtk_spi_slave_disable_dma(mdata);
+ mtk_spi_slave_disable_xfer(mdata);
+ writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG);
+
+ return ret;
+}
+
+static int mtk_spi_slave_transfer_one(struct spi_controller *ctlr,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+
+ reinit_completion(&mdata->xfer_done);
+ mdata->slave_aborted = false;
+ mdata->cur_transfer = xfer;
+
+ if (xfer->len > MTK_SPI_SLAVE_MAX_FIFO_SIZE)
+ return mtk_spi_slave_dma_transfer(ctlr, spi, xfer);
+ else
+ return mtk_spi_slave_fifo_transfer(ctlr, spi, xfer);
+}
+
+static int mtk_spi_slave_setup(struct spi_device *spi)
+{
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(spi->master);
+ u32 reg_val;
+
+ reg_val = DMA_DONE_EN | DATA_DONE_EN |
+ RSTA_DONE_EN | CMD_INVALID_EN;
+ writel(reg_val, mdata->base + SPIS_IRQ_EN_REG);
+
+ reg_val = DMA_DONE_MASK | DATA_DONE_MASK |
+ RSTA_DONE_MASK | CMD_INVALID_MASK;
+ writel(reg_val, mdata->base + SPIS_IRQ_MASK_REG);
+
+ mtk_spi_slave_disable_dma(mdata);
+ mtk_spi_slave_disable_xfer(mdata);
+
+ return 0;
+}
+
+static int mtk_slave_abort(struct spi_controller *ctlr)
+{
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+
+ mdata->slave_aborted = true;
+ complete(&mdata->xfer_done);
+
+ return 0;
+}
+
+static irqreturn_t mtk_spi_slave_interrupt(int irq, void *dev_id)
+{
+ struct spi_controller *ctlr = dev_id;
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ struct spi_transfer *trans = mdata->cur_transfer;
+ u32 int_status, reg_val, cnt, remainder;
+
+ int_status = readl(mdata->base + SPIS_IRQ_ST_REG);
+ writel(int_status, mdata->base + SPIS_IRQ_CLR_REG);
+
+ if (!trans)
+ return IRQ_NONE;
+
+ if ((int_status & DMA_DONE_ST) &&
+ ((int_status & DATA_DONE_ST) ||
+ (int_status & RSTA_DONE_ST))) {
+ writel(SPIS_SOFT_RST, mdata->base + SPIS_SOFT_RST_REG);
+
+ if (trans->tx_buf)
+ dma_unmap_single(mdata->dev, trans->tx_dma,
+ trans->len, DMA_TO_DEVICE);
+ if (trans->rx_buf)
+ dma_unmap_single(mdata->dev, trans->rx_dma,
+ trans->len, DMA_FROM_DEVICE);
+
+ mtk_spi_slave_disable_dma(mdata);
+ mtk_spi_slave_disable_xfer(mdata);
+ }
+
+ if ((!(int_status & DMA_DONE_ST)) &&
+ ((int_status & DATA_DONE_ST) ||
+ (int_status & RSTA_DONE_ST))) {
+ cnt = trans->len / 4;
+ if (trans->rx_buf)
+ ioread32_rep(mdata->base + SPIS_RX_DATA_REG,
+ trans->rx_buf, cnt);
+ remainder = trans->len % 4;
+ if (trans->rx_buf && remainder > 0) {
+ reg_val = readl(mdata->base + SPIS_RX_DATA_REG);
+ memcpy(trans->rx_buf + (cnt * 4),
+ &reg_val, remainder);
+ }
+
+ mtk_spi_slave_disable_xfer(mdata);
+ }
+
+ if (int_status & CMD_INVALID_ST) {
+ dev_warn(&ctlr->dev, "cmd invalid\n");
+ return IRQ_NONE;
+ }
+
+ mdata->cur_transfer = NULL;
+ complete(&mdata->xfer_done);
+
+ return IRQ_HANDLED;
+}
+
+static int mtk_spi_slave_probe(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr;
+ struct mtk_spi_slave *mdata;
+ struct resource *res;
+ int irq, ret;
+
+ ctlr = spi_alloc_slave(&pdev->dev, sizeof(*mdata));
+ if (!ctlr) {
+ dev_err(&pdev->dev, "failed to alloc spi slave\n");
+ return -ENOMEM;
+ }
+
+ ctlr->auto_runtime_pm = true;
+ ctlr->dev.of_node = pdev->dev.of_node;
+ ctlr->mode_bits = SPI_CPOL | SPI_CPHA;
+ ctlr->mode_bits |= SPI_LSB_FIRST;
+
+ ctlr->prepare_message = mtk_spi_slave_prepare_message;
+ ctlr->transfer_one = mtk_spi_slave_transfer_one;
+ ctlr->setup = mtk_spi_slave_setup;
+ ctlr->slave_abort = mtk_slave_abort;
+
+ mdata = spi_controller_get_devdata(ctlr);
+
+ platform_set_drvdata(pdev, ctlr);
+
+ init_completion(&mdata->xfer_done);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ dev_err(&pdev->dev, "failed to determine base address\n");
+ goto err_put_ctlr;
+ }
+
+ mdata->dev = &pdev->dev;
+
+ mdata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mdata->base)) {
+ ret = PTR_ERR(mdata->base);
+ goto err_put_ctlr;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq (%d)\n", irq);
+ ret = irq;
+ goto err_put_ctlr;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, mtk_spi_slave_interrupt,
+ IRQF_TRIGGER_NONE, dev_name(&pdev->dev), ctlr);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register irq (%d)\n", ret);
+ goto err_put_ctlr;
+ }
+
+ mdata->spi_clk = devm_clk_get(&pdev->dev, "spi");
+ if (IS_ERR(mdata->spi_clk)) {
+ ret = PTR_ERR(mdata->spi_clk);
+ dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret);
+ goto err_put_ctlr;
+ }
+
+ ret = clk_prepare_enable(mdata->spi_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to enable spi_clk (%d)\n", ret);
+ goto err_put_ctlr;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = devm_spi_register_controller(&pdev->dev, ctlr);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to register slave controller(%d)\n", ret);
+ clk_disable_unprepare(mdata->spi_clk);
+ goto err_disable_runtime_pm;
+ }
+
+ clk_disable_unprepare(mdata->spi_clk);
+
+ return 0;
+
+err_disable_runtime_pm:
+ pm_runtime_disable(&pdev->dev);
+err_put_ctlr:
+ spi_controller_put(ctlr);
+
+ return ret;
+}
+
+static int mtk_spi_slave_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_spi_slave_suspend(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ int ret;
+
+ ret = spi_controller_suspend(ctlr);
+ if (ret)
+ return ret;
+
+ if (!pm_runtime_suspended(dev))
+ clk_disable_unprepare(mdata->spi_clk);
+
+ return ret;
+}
+
+static int mtk_spi_slave_resume(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ int ret;
+
+ if (!pm_runtime_suspended(dev)) {
+ ret = clk_prepare_enable(mdata->spi_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable spi_clk (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ ret = spi_controller_resume(ctlr);
+ if (ret < 0)
+ clk_disable_unprepare(mdata->spi_clk);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int mtk_spi_slave_runtime_suspend(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+
+ clk_disable_unprepare(mdata->spi_clk);
+
+ return 0;
+}
+
+static int mtk_spi_slave_runtime_resume(struct device *dev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(dev);
+ struct mtk_spi_slave *mdata = spi_controller_get_devdata(ctlr);
+ int ret;
+
+ ret = clk_prepare_enable(mdata->spi_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable spi_clk (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops mtk_spi_slave_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(mtk_spi_slave_suspend, mtk_spi_slave_resume)
+ SET_RUNTIME_PM_OPS(mtk_spi_slave_runtime_suspend,
+ mtk_spi_slave_runtime_resume, NULL)
+};
+
+static struct platform_driver mtk_spi_slave_driver = {
+ .driver = {
+ .name = "mtk-spi-slave",
+ .pm = &mtk_spi_slave_pm,
+ .of_match_table = mtk_spi_slave_of_match,
+ },
+ .probe = mtk_spi_slave_probe,
+ .remove = mtk_spi_slave_remove,
+};
+
+module_platform_driver(mtk_spi_slave_driver);
+
+MODULE_DESCRIPTION("MTK SPI Slave Controller driver");
+MODULE_AUTHOR("Leilk Liu <leilk.liu@mediatek.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:mtk-spi-slave");
diff --git a/drivers/spi/spi-slave-system-control.c b/drivers/spi/spi-slave-system-control.c
index c0257e937995..169f3d595f60 100644
--- a/drivers/spi/spi-slave-system-control.c
+++ b/drivers/spi/spi-slave-system-control.c
@@ -60,6 +60,7 @@ static void spi_slave_system_control_complete(void *arg)
case CMD_REBOOT:
dev_info(&priv->spi->dev, "Rebooting system...\n");
kernel_restart(NULL);
+ break;
case CMD_POWEROFF:
dev_info(&priv->spi->dev, "Powering off system...\n");
diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c
new file mode 100644
index 000000000000..8daa24eec624
--- /dev/null
+++ b/drivers/spi/spi-sprd.c
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+
+#define SPRD_SPI_TXD 0x0
+#define SPRD_SPI_CLKD 0x4
+#define SPRD_SPI_CTL0 0x8
+#define SPRD_SPI_CTL1 0xc
+#define SPRD_SPI_CTL2 0x10
+#define SPRD_SPI_CTL3 0x14
+#define SPRD_SPI_CTL4 0x18
+#define SPRD_SPI_CTL5 0x1c
+#define SPRD_SPI_INT_EN 0x20
+#define SPRD_SPI_INT_CLR 0x24
+#define SPRD_SPI_INT_RAW_STS 0x28
+#define SPRD_SPI_INT_MASK_STS 0x2c
+#define SPRD_SPI_STS1 0x30
+#define SPRD_SPI_STS2 0x34
+#define SPRD_SPI_DSP_WAIT 0x38
+#define SPRD_SPI_STS3 0x3c
+#define SPRD_SPI_CTL6 0x40
+#define SPRD_SPI_STS4 0x44
+#define SPRD_SPI_FIFO_RST 0x48
+#define SPRD_SPI_CTL7 0x4c
+#define SPRD_SPI_STS5 0x50
+#define SPRD_SPI_CTL8 0x54
+#define SPRD_SPI_CTL9 0x58
+#define SPRD_SPI_CTL10 0x5c
+#define SPRD_SPI_CTL11 0x60
+#define SPRD_SPI_CTL12 0x64
+#define SPRD_SPI_STS6 0x68
+#define SPRD_SPI_STS7 0x6c
+#define SPRD_SPI_STS8 0x70
+#define SPRD_SPI_STS9 0x74
+
+/* Bits & mask definition for register CTL0 */
+#define SPRD_SPI_SCK_REV BIT(13)
+#define SPRD_SPI_NG_TX BIT(1)
+#define SPRD_SPI_NG_RX BIT(0)
+#define SPRD_SPI_CHNL_LEN_MASK GENMASK(4, 0)
+#define SPRD_SPI_CSN_MASK GENMASK(11, 8)
+#define SPRD_SPI_CS0_VALID BIT(8)
+
+/* Bits & mask definition for register SPI_INT_EN */
+#define SPRD_SPI_TX_END_INT_EN BIT(8)
+#define SPRD_SPI_RX_END_INT_EN BIT(9)
+
+/* Bits & mask definition for register SPI_INT_RAW_STS */
+#define SPRD_SPI_TX_END_RAW BIT(8)
+#define SPRD_SPI_RX_END_RAW BIT(9)
+
+/* Bits & mask definition for register SPI_INT_CLR */
+#define SPRD_SPI_TX_END_CLR BIT(8)
+#define SPRD_SPI_RX_END_CLR BIT(9)
+
+/* Bits & mask definition for register INT_MASK_STS */
+#define SPRD_SPI_MASK_RX_END BIT(9)
+#define SPRD_SPI_MASK_TX_END BIT(8)
+
+/* Bits & mask definition for register STS2 */
+#define SPRD_SPI_TX_BUSY BIT(8)
+
+/* Bits & mask definition for register CTL1 */
+#define SPRD_SPI_RX_MODE BIT(12)
+#define SPRD_SPI_TX_MODE BIT(13)
+#define SPRD_SPI_RTX_MD_MASK GENMASK(13, 12)
+
+/* Bits & mask definition for register CTL2 */
+#define SPRD_SPI_DMA_EN BIT(6)
+
+/* Bits & mask definition for register CTL4 */
+#define SPRD_SPI_START_RX BIT(9)
+#define SPRD_SPI_ONLY_RECV_MASK GENMASK(8, 0)
+
+/* Bits & mask definition for register SPI_INT_CLR */
+#define SPRD_SPI_RX_END_INT_CLR BIT(9)
+#define SPRD_SPI_TX_END_INT_CLR BIT(8)
+
+/* Bits & mask definition for register SPI_INT_RAW */
+#define SPRD_SPI_RX_END_IRQ BIT(9)
+#define SPRD_SPI_TX_END_IRQ BIT(8)
+
+/* Bits & mask definition for register CTL12 */
+#define SPRD_SPI_SW_RX_REQ BIT(0)
+#define SPRD_SPI_SW_TX_REQ BIT(1)
+
+/* Bits & mask definition for register CTL7 */
+#define SPRD_SPI_DATA_LINE2_EN BIT(15)
+#define SPRD_SPI_MODE_MASK GENMASK(5, 3)
+#define SPRD_SPI_MODE_OFFSET 3
+#define SPRD_SPI_3WIRE_MODE 4
+#define SPRD_SPI_4WIRE_MODE 0
+
+/* Bits & mask definition for register CTL8 */
+#define SPRD_SPI_TX_MAX_LEN_MASK GENMASK(19, 0)
+#define SPRD_SPI_TX_LEN_H_MASK GENMASK(3, 0)
+#define SPRD_SPI_TX_LEN_H_OFFSET 16
+
+/* Bits & mask definition for register CTL9 */
+#define SPRD_SPI_TX_LEN_L_MASK GENMASK(15, 0)
+
+/* Bits & mask definition for register CTL10 */
+#define SPRD_SPI_RX_MAX_LEN_MASK GENMASK(19, 0)
+#define SPRD_SPI_RX_LEN_H_MASK GENMASK(3, 0)
+#define SPRD_SPI_RX_LEN_H_OFFSET 16
+
+/* Bits & mask definition for register CTL11 */
+#define SPRD_SPI_RX_LEN_L_MASK GENMASK(15, 0)
+
+/* Default & maximum word delay cycles */
+#define SPRD_SPI_MIN_DELAY_CYCLE 14
+#define SPRD_SPI_MAX_DELAY_CYCLE 130
+
+#define SPRD_SPI_FIFO_SIZE 32
+#define SPRD_SPI_CHIP_CS_NUM 0x4
+#define SPRD_SPI_CHNL_LEN 2
+#define SPRD_SPI_DEFAULT_SOURCE 26000000
+#define SPRD_SPI_MAX_SPEED_HZ 48000000
+#define SPRD_SPI_AUTOSUSPEND_DELAY 100
+
+struct sprd_spi {
+ void __iomem *base;
+ struct device *dev;
+ struct clk *clk;
+ u32 src_clk;
+ u32 hw_mode;
+ u32 trans_len;
+ u32 trans_mode;
+ u32 word_delay;
+ u32 hw_speed_hz;
+ u32 len;
+ int status;
+ const void *tx_buf;
+ void *rx_buf;
+ int (*read_bufs)(struct sprd_spi *ss, u32 len);
+ int (*write_bufs)(struct sprd_spi *ss, u32 len);
+};
+
+static u32 sprd_spi_transfer_max_timeout(struct sprd_spi *ss,
+ struct spi_transfer *t)
+{
+ /*
+ * The time spent on transmission of the full FIFO data is the maximum
+ * SPI transmission time.
+ */
+ u32 size = t->bits_per_word * SPRD_SPI_FIFO_SIZE;
+ u32 bit_time_us = DIV_ROUND_UP(USEC_PER_SEC, ss->hw_speed_hz);
+ u32 total_time_us = size * bit_time_us;
+ /*
+ * There is an interval between data and the data in our SPI hardware,
+ * so the total transmission time need add the interval time.
+ */
+ u32 interval_cycle = SPRD_SPI_FIFO_SIZE * ss->word_delay;
+ u32 interval_time_us = DIV_ROUND_UP(interval_cycle * USEC_PER_SEC,
+ ss->src_clk);
+
+ return total_time_us + interval_time_us;
+}
+
+static int sprd_spi_wait_for_tx_end(struct sprd_spi *ss, struct spi_transfer *t)
+{
+ u32 val, us;
+ int ret;
+
+ us = sprd_spi_transfer_max_timeout(ss, t);
+ ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_INT_RAW_STS, val,
+ val & SPRD_SPI_TX_END_IRQ, 0, us);
+ if (ret) {
+ dev_err(ss->dev, "SPI error, spi send timeout!\n");
+ return ret;
+ }
+
+ ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_STS2, val,
+ !(val & SPRD_SPI_TX_BUSY), 0, us);
+ if (ret) {
+ dev_err(ss->dev, "SPI error, spi busy timeout!\n");
+ return ret;
+ }
+
+ writel_relaxed(SPRD_SPI_TX_END_INT_CLR, ss->base + SPRD_SPI_INT_CLR);
+
+ return 0;
+}
+
+static int sprd_spi_wait_for_rx_end(struct sprd_spi *ss, struct spi_transfer *t)
+{
+ u32 val, us;
+ int ret;
+
+ us = sprd_spi_transfer_max_timeout(ss, t);
+ ret = readl_relaxed_poll_timeout(ss->base + SPRD_SPI_INT_RAW_STS, val,
+ val & SPRD_SPI_RX_END_IRQ, 0, us);
+ if (ret) {
+ dev_err(ss->dev, "SPI error, spi rx timeout!\n");
+ return ret;
+ }
+
+ writel_relaxed(SPRD_SPI_RX_END_INT_CLR, ss->base + SPRD_SPI_INT_CLR);
+
+ return 0;
+}
+
+static void sprd_spi_tx_req(struct sprd_spi *ss)
+{
+ writel_relaxed(SPRD_SPI_SW_TX_REQ, ss->base + SPRD_SPI_CTL12);
+}
+
+static void sprd_spi_rx_req(struct sprd_spi *ss)
+{
+ writel_relaxed(SPRD_SPI_SW_RX_REQ, ss->base + SPRD_SPI_CTL12);
+}
+
+static void sprd_spi_enter_idle(struct sprd_spi *ss)
+{
+ u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL1);
+
+ val &= ~SPRD_SPI_RTX_MD_MASK;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL1);
+}
+
+static void sprd_spi_set_transfer_bits(struct sprd_spi *ss, u32 bits)
+{
+ u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL0);
+
+ /* Set the valid bits for every transaction */
+ val &= ~(SPRD_SPI_CHNL_LEN_MASK << SPRD_SPI_CHNL_LEN);
+ val |= bits << SPRD_SPI_CHNL_LEN;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
+}
+
+static void sprd_spi_set_tx_length(struct sprd_spi *ss, u32 length)
+{
+ u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL8);
+
+ length &= SPRD_SPI_TX_MAX_LEN_MASK;
+ val &= ~SPRD_SPI_TX_LEN_H_MASK;
+ val |= length >> SPRD_SPI_TX_LEN_H_OFFSET;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL8);
+
+ val = length & SPRD_SPI_TX_LEN_L_MASK;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL9);
+}
+
+static void sprd_spi_set_rx_length(struct sprd_spi *ss, u32 length)
+{
+ u32 val = readl_relaxed(ss->base + SPRD_SPI_CTL10);
+
+ length &= SPRD_SPI_RX_MAX_LEN_MASK;
+ val &= ~SPRD_SPI_RX_LEN_H_MASK;
+ val |= length >> SPRD_SPI_RX_LEN_H_OFFSET;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL10);
+
+ val = length & SPRD_SPI_RX_LEN_L_MASK;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL11);
+}
+
+static void sprd_spi_chipselect(struct spi_device *sdev, bool cs)
+{
+ struct spi_controller *sctlr = sdev->controller;
+ struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
+ u32 val;
+
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL0);
+ /* The SPI controller will pull down CS pin if cs is 0 */
+ if (!cs) {
+ val &= ~SPRD_SPI_CS0_VALID;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
+ } else {
+ val |= SPRD_SPI_CSN_MASK;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
+ }
+}
+
+static int sprd_spi_write_only_receive(struct sprd_spi *ss, u32 len)
+{
+ u32 val;
+
+ /* Clear the start receive bit and reset receive data number */
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL4);
+ val &= ~(SPRD_SPI_START_RX | SPRD_SPI_ONLY_RECV_MASK);
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL4);
+
+ /* Set the receive data length */
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL4);
+ val |= len & SPRD_SPI_ONLY_RECV_MASK;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL4);
+
+ /* Trigger to receive data */
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL4);
+ val |= SPRD_SPI_START_RX;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL4);
+
+ return len;
+}
+
+static int sprd_spi_write_bufs_u8(struct sprd_spi *ss, u32 len)
+{
+ u8 *tx_p = (u8 *)ss->tx_buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ writeb_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD);
+
+ ss->tx_buf += i;
+ return i;
+}
+
+static int sprd_spi_write_bufs_u16(struct sprd_spi *ss, u32 len)
+{
+ u16 *tx_p = (u16 *)ss->tx_buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ writew_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD);
+
+ ss->tx_buf += i << 1;
+ return i << 1;
+}
+
+static int sprd_spi_write_bufs_u32(struct sprd_spi *ss, u32 len)
+{
+ u32 *tx_p = (u32 *)ss->tx_buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ writel_relaxed(tx_p[i], ss->base + SPRD_SPI_TXD);
+
+ ss->tx_buf += i << 2;
+ return i << 2;
+}
+
+static int sprd_spi_read_bufs_u8(struct sprd_spi *ss, u32 len)
+{
+ u8 *rx_p = (u8 *)ss->rx_buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ rx_p[i] = readb_relaxed(ss->base + SPRD_SPI_TXD);
+
+ ss->rx_buf += i;
+ return i;
+}
+
+static int sprd_spi_read_bufs_u16(struct sprd_spi *ss, u32 len)
+{
+ u16 *rx_p = (u16 *)ss->rx_buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ rx_p[i] = readw_relaxed(ss->base + SPRD_SPI_TXD);
+
+ ss->rx_buf += i << 1;
+ return i << 1;
+}
+
+static int sprd_spi_read_bufs_u32(struct sprd_spi *ss, u32 len)
+{
+ u32 *rx_p = (u32 *)ss->rx_buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ rx_p[i] = readl_relaxed(ss->base + SPRD_SPI_TXD);
+
+ ss->rx_buf += i << 2;
+ return i << 2;
+}
+
+static int sprd_spi_txrx_bufs(struct spi_device *sdev, struct spi_transfer *t)
+{
+ struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller);
+ u32 trans_len = ss->trans_len, len;
+ int ret, write_size = 0;
+
+ while (trans_len) {
+ len = trans_len > SPRD_SPI_FIFO_SIZE ? SPRD_SPI_FIFO_SIZE :
+ trans_len;
+ if (ss->trans_mode & SPRD_SPI_TX_MODE) {
+ sprd_spi_set_tx_length(ss, len);
+ write_size += ss->write_bufs(ss, len);
+
+ /*
+ * For our 3 wires mode or dual TX line mode, we need
+ * to request the controller to transfer.
+ */
+ if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL)
+ sprd_spi_tx_req(ss);
+
+ ret = sprd_spi_wait_for_tx_end(ss, t);
+ } else {
+ sprd_spi_set_rx_length(ss, len);
+
+ /*
+ * For our 3 wires mode or dual TX line mode, we need
+ * to request the controller to read.
+ */
+ if (ss->hw_mode & SPI_3WIRE || ss->hw_mode & SPI_TX_DUAL)
+ sprd_spi_rx_req(ss);
+ else
+ write_size += ss->write_bufs(ss, len);
+
+ ret = sprd_spi_wait_for_rx_end(ss, t);
+ }
+
+ if (ret)
+ goto complete;
+
+ if (ss->trans_mode & SPRD_SPI_RX_MODE)
+ ss->read_bufs(ss, len);
+
+ trans_len -= len;
+ }
+
+ ret = write_size;
+
+complete:
+ sprd_spi_enter_idle(ss);
+
+ return ret;
+}
+
+static void sprd_spi_set_speed(struct sprd_spi *ss, u32 speed_hz)
+{
+ /*
+ * From SPI datasheet, the prescale calculation formula:
+ * prescale = SPI source clock / (2 * SPI_freq) - 1;
+ */
+ u32 clk_div = DIV_ROUND_UP(ss->src_clk, speed_hz << 1) - 1;
+
+ /* Save the real hardware speed */
+ ss->hw_speed_hz = (ss->src_clk >> 1) / (clk_div + 1);
+ writel_relaxed(clk_div, ss->base + SPRD_SPI_CLKD);
+}
+
+static void sprd_spi_init_hw(struct sprd_spi *ss, struct spi_transfer *t)
+{
+ u16 word_delay, interval;
+ u32 val;
+
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
+ val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX);
+ /* Set default chip selection, clock phase and clock polarity */
+ val |= ss->hw_mode & SPI_CPHA ? SPRD_SPI_NG_RX : SPRD_SPI_NG_TX;
+ val |= ss->hw_mode & SPI_CPOL ? SPRD_SPI_SCK_REV : 0;
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL0);
+
+ /*
+ * Set the intervals of two SPI frames, and the inteval calculation
+ * formula as below per datasheet:
+ * interval time (source clock cycles) = interval * 4 + 10.
+ */
+ word_delay = clamp_t(u16, t->word_delay, SPRD_SPI_MIN_DELAY_CYCLE,
+ SPRD_SPI_MAX_DELAY_CYCLE);
+ interval = DIV_ROUND_UP(word_delay - 10, 4);
+ ss->word_delay = interval * 4 + 10;
+ writel_relaxed(interval, ss->base + SPRD_SPI_CTL5);
+
+ /* Reset SPI fifo */
+ writel_relaxed(1, ss->base + SPRD_SPI_FIFO_RST);
+ writel_relaxed(0, ss->base + SPRD_SPI_FIFO_RST);
+
+ /* Set SPI work mode */
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
+ val &= ~SPRD_SPI_MODE_MASK;
+
+ if (ss->hw_mode & SPI_3WIRE)
+ val |= SPRD_SPI_3WIRE_MODE << SPRD_SPI_MODE_OFFSET;
+ else
+ val |= SPRD_SPI_4WIRE_MODE << SPRD_SPI_MODE_OFFSET;
+
+ if (ss->hw_mode & SPI_TX_DUAL)
+ val |= SPRD_SPI_DATA_LINE2_EN;
+ else
+ val &= ~SPRD_SPI_DATA_LINE2_EN;
+
+ writel_relaxed(val, ss->base + SPRD_SPI_CTL7);
+}
+
+static int sprd_spi_setup_transfer(struct spi_device *sdev,
+ struct spi_transfer *t)
+{
+ struct sprd_spi *ss = spi_controller_get_devdata(sdev->controller);
+ u8 bits_per_word = t->bits_per_word;
+ u32 val, mode = 0;
+
+ ss->len = t->len;
+ ss->tx_buf = t->tx_buf;
+ ss->rx_buf = t->rx_buf;
+
+ ss->hw_mode = sdev->mode;
+ sprd_spi_init_hw(ss, t);
+
+ /* Set tansfer speed and valid bits */
+ sprd_spi_set_speed(ss, t->speed_hz);
+ sprd_spi_set_transfer_bits(ss, bits_per_word);
+
+ if (bits_per_word > 16)
+ bits_per_word = round_up(bits_per_word, 16);
+ else
+ bits_per_word = round_up(bits_per_word, 8);
+
+ switch (bits_per_word) {
+ case 8:
+ ss->trans_len = t->len;
+ ss->read_bufs = sprd_spi_read_bufs_u8;
+ ss->write_bufs = sprd_spi_write_bufs_u8;
+ break;
+ case 16:
+ ss->trans_len = t->len >> 1;
+ ss->read_bufs = sprd_spi_read_bufs_u16;
+ ss->write_bufs = sprd_spi_write_bufs_u16;
+ break;
+ case 32:
+ ss->trans_len = t->len >> 2;
+ ss->read_bufs = sprd_spi_read_bufs_u32;
+ ss->write_bufs = sprd_spi_write_bufs_u32;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Set transfer read or write mode */
+ val = readl_relaxed(ss->base + SPRD_SPI_CTL1);
+ val &= ~SPRD_SPI_RTX_MD_MASK;
+ if (t->tx_buf)
+ mode |= SPRD_SPI_TX_MODE;
+ if (t->rx_buf)
+ mode |= SPRD_SPI_RX_MODE;
+
+ writel_relaxed(val | mode, ss->base + SPRD_SPI_CTL1);
+
+ ss->trans_mode = mode;
+
+ /*
+ * If in only receive mode, we need to trigger the SPI controller to
+ * receive data automatically.
+ */
+ if (ss->trans_mode == SPRD_SPI_RX_MODE)
+ ss->write_bufs = sprd_spi_write_only_receive;
+
+ return 0;
+}
+
+static int sprd_spi_transfer_one(struct spi_controller *sctlr,
+ struct spi_device *sdev,
+ struct spi_transfer *t)
+{
+ int ret;
+
+ ret = sprd_spi_setup_transfer(sdev, t);
+ if (ret)
+ goto setup_err;
+
+ ret = sprd_spi_txrx_bufs(sdev, t);
+ if (ret == t->len)
+ ret = 0;
+ else if (ret >= 0)
+ ret = -EREMOTEIO;
+
+setup_err:
+ spi_finalize_current_transfer(sctlr);
+
+ return ret;
+}
+
+static int sprd_spi_clk_init(struct platform_device *pdev, struct sprd_spi *ss)
+{
+ struct clk *clk_spi, *clk_parent;
+
+ clk_spi = devm_clk_get(&pdev->dev, "spi");
+ if (IS_ERR(clk_spi)) {
+ dev_warn(&pdev->dev, "can't get the spi clock\n");
+ clk_spi = NULL;
+ }
+
+ clk_parent = devm_clk_get(&pdev->dev, "source");
+ if (IS_ERR(clk_parent)) {
+ dev_warn(&pdev->dev, "can't get the source clock\n");
+ clk_parent = NULL;
+ }
+
+ ss->clk = devm_clk_get(&pdev->dev, "enable");
+ if (IS_ERR(ss->clk)) {
+ dev_err(&pdev->dev, "can't get the enable clock\n");
+ return PTR_ERR(ss->clk);
+ }
+
+ if (!clk_set_parent(clk_spi, clk_parent))
+ ss->src_clk = clk_get_rate(clk_spi);
+ else
+ ss->src_clk = SPRD_SPI_DEFAULT_SOURCE;
+
+ return 0;
+}
+
+static int sprd_spi_probe(struct platform_device *pdev)
+{
+ struct spi_controller *sctlr;
+ struct resource *res;
+ struct sprd_spi *ss;
+ int ret;
+
+ pdev->id = of_alias_get_id(pdev->dev.of_node, "spi");
+ sctlr = spi_alloc_master(&pdev->dev, sizeof(*ss));
+ if (!sctlr)
+ return -ENOMEM;
+
+ ss = spi_controller_get_devdata(sctlr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ss->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ss->base)) {
+ ret = PTR_ERR(ss->base);
+ goto free_controller;
+ }
+
+ ss->dev = &pdev->dev;
+ sctlr->dev.of_node = pdev->dev.of_node;
+ sctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE | SPI_TX_DUAL;
+ sctlr->bus_num = pdev->id;
+ sctlr->set_cs = sprd_spi_chipselect;
+ sctlr->transfer_one = sprd_spi_transfer_one;
+ sctlr->auto_runtime_pm = true;
+ sctlr->max_speed_hz = min_t(u32, ss->src_clk >> 1,
+ SPRD_SPI_MAX_SPEED_HZ);
+
+ platform_set_drvdata(pdev, sctlr);
+ ret = sprd_spi_clk_init(pdev, ss);
+ if (ret)
+ goto free_controller;
+
+ ret = clk_prepare_enable(ss->clk);
+ if (ret)
+ goto free_controller;
+
+ ret = pm_runtime_set_active(&pdev->dev);
+ if (ret < 0)
+ goto disable_clk;
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ SPRD_SPI_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to resume SPI controller\n");
+ goto err_rpm_put;
+ }
+
+ ret = devm_spi_register_controller(&pdev->dev, sctlr);
+ if (ret)
+ goto err_rpm_put;
+
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
+ return 0;
+
+err_rpm_put:
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+disable_clk:
+ clk_disable_unprepare(ss->clk);
+free_controller:
+ spi_controller_put(sctlr);
+
+ return ret;
+}
+
+static int sprd_spi_remove(struct platform_device *pdev)
+{
+ struct spi_controller *sctlr = platform_get_drvdata(pdev);
+ struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
+ int ret;
+
+ ret = pm_runtime_get_sync(ss->dev);
+ if (ret < 0) {
+ dev_err(ss->dev, "failed to resume SPI controller\n");
+ return ret;
+ }
+
+ clk_disable_unprepare(ss->clk);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static int __maybe_unused sprd_spi_runtime_suspend(struct device *dev)
+{
+ struct spi_controller *sctlr = dev_get_drvdata(dev);
+ struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
+
+ clk_disable_unprepare(ss->clk);
+
+ return 0;
+}
+
+static int __maybe_unused sprd_spi_runtime_resume(struct device *dev)
+{
+ struct spi_controller *sctlr = dev_get_drvdata(dev);
+ struct sprd_spi *ss = spi_controller_get_devdata(sctlr);
+ int ret;
+
+ ret = clk_prepare_enable(ss->clk);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct dev_pm_ops sprd_spi_pm_ops = {
+ SET_RUNTIME_PM_OPS(sprd_spi_runtime_suspend,
+ sprd_spi_runtime_resume, NULL)
+};
+
+static const struct of_device_id sprd_spi_of_match[] = {
+ { .compatible = "sprd,sc9860-spi", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver sprd_spi_driver = {
+ .driver = {
+ .name = "sprd-spi",
+ .of_match_table = sprd_spi_of_match,
+ .pm = &sprd_spi_pm_ops,
+ },
+ .probe = sprd_spi_probe,
+ .remove = sprd_spi_remove,
+};
+
+module_platform_driver(sprd_spi_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SPI Controller driver");
+MODULE_AUTHOR("Lanqing Liu <lanqing.liu@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
new file mode 100644
index 000000000000..3b2a9a6b990d
--- /dev/null
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/sizes.h>
+#include <linux/spi/spi-mem.h>
+
+#define QSPI_CR 0x00
+#define CR_EN BIT(0)
+#define CR_ABORT BIT(1)
+#define CR_DMAEN BIT(2)
+#define CR_TCEN BIT(3)
+#define CR_SSHIFT BIT(4)
+#define CR_DFM BIT(6)
+#define CR_FSEL BIT(7)
+#define CR_FTHRES_MASK GENMASK(12, 8)
+#define CR_TEIE BIT(16)
+#define CR_TCIE BIT(17)
+#define CR_FTIE BIT(18)
+#define CR_SMIE BIT(19)
+#define CR_TOIE BIT(20)
+#define CR_PRESC_MASK GENMASK(31, 24)
+
+#define QSPI_DCR 0x04
+#define DCR_FSIZE_MASK GENMASK(20, 16)
+
+#define QSPI_SR 0x08
+#define SR_TEF BIT(0)
+#define SR_TCF BIT(1)
+#define SR_FTF BIT(2)
+#define SR_SMF BIT(3)
+#define SR_TOF BIT(4)
+#define SR_BUSY BIT(5)
+#define SR_FLEVEL_MASK GENMASK(13, 8)
+
+#define QSPI_FCR 0x0c
+#define FCR_CTEF BIT(0)
+#define FCR_CTCF BIT(1)
+
+#define QSPI_DLR 0x10
+
+#define QSPI_CCR 0x14
+#define CCR_INST_MASK GENMASK(7, 0)
+#define CCR_IMODE_MASK GENMASK(9, 8)
+#define CCR_ADMODE_MASK GENMASK(11, 10)
+#define CCR_ADSIZE_MASK GENMASK(13, 12)
+#define CCR_DCYC_MASK GENMASK(22, 18)
+#define CCR_DMODE_MASK GENMASK(25, 24)
+#define CCR_FMODE_MASK GENMASK(27, 26)
+#define CCR_FMODE_INDW (0U << 26)
+#define CCR_FMODE_INDR (1U << 26)
+#define CCR_FMODE_APM (2U << 26)
+#define CCR_FMODE_MM (3U << 26)
+#define CCR_BUSWIDTH_0 0x0
+#define CCR_BUSWIDTH_1 0x1
+#define CCR_BUSWIDTH_2 0x2
+#define CCR_BUSWIDTH_4 0x3
+
+#define QSPI_AR 0x18
+#define QSPI_ABR 0x1c
+#define QSPI_DR 0x20
+#define QSPI_PSMKR 0x24
+#define QSPI_PSMAR 0x28
+#define QSPI_PIR 0x2c
+#define QSPI_LPTR 0x30
+#define LPTR_DFT_TIMEOUT 0x10
+
+#define STM32_QSPI_MAX_MMAP_SZ SZ_256M
+#define STM32_QSPI_MAX_NORCHIP 2
+
+#define STM32_FIFO_TIMEOUT_US 30000
+#define STM32_BUSY_TIMEOUT_US 100000
+#define STM32_ABT_TIMEOUT_US 100000
+
+struct stm32_qspi_flash {
+ struct stm32_qspi *qspi;
+ u32 cs;
+ u32 presc;
+};
+
+struct stm32_qspi {
+ struct device *dev;
+ void __iomem *io_base;
+ void __iomem *mm_base;
+ resource_size_t mm_size;
+ struct clk *clk;
+ u32 clk_rate;
+ struct stm32_qspi_flash flash[STM32_QSPI_MAX_NORCHIP];
+ struct completion data_completion;
+ u32 fmode;
+
+ /*
+ * to protect device configuration, could be different between
+ * 2 flash access (bk1, bk2)
+ */
+ struct mutex lock;
+};
+
+static irqreturn_t stm32_qspi_irq(int irq, void *dev_id)
+{
+ struct stm32_qspi *qspi = (struct stm32_qspi *)dev_id;
+ u32 cr, sr;
+
+ sr = readl_relaxed(qspi->io_base + QSPI_SR);
+
+ if (sr & (SR_TEF | SR_TCF)) {
+ /* disable irq */
+ cr = readl_relaxed(qspi->io_base + QSPI_CR);
+ cr &= ~CR_TCIE & ~CR_TEIE;
+ writel_relaxed(cr, qspi->io_base + QSPI_CR);
+ complete(&qspi->data_completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void stm32_qspi_read_fifo(u8 *val, void __iomem *addr)
+{
+ *val = readb_relaxed(addr);
+}
+
+static void stm32_qspi_write_fifo(u8 *val, void __iomem *addr)
+{
+ writeb_relaxed(*val, addr);
+}
+
+static int stm32_qspi_tx_poll(struct stm32_qspi *qspi,
+ const struct spi_mem_op *op)
+{
+ void (*tx_fifo)(u8 *val, void __iomem *addr);
+ u32 len = op->data.nbytes, sr;
+ u8 *buf;
+ int ret;
+
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ tx_fifo = stm32_qspi_read_fifo;
+ buf = op->data.buf.in;
+
+ } else {
+ tx_fifo = stm32_qspi_write_fifo;
+ buf = (u8 *)op->data.buf.out;
+ }
+
+ while (len--) {
+ ret = readl_relaxed_poll_timeout_atomic(qspi->io_base + QSPI_SR,
+ sr, (sr & SR_FTF), 1,
+ STM32_FIFO_TIMEOUT_US);
+ if (ret) {
+ dev_err(qspi->dev, "fifo timeout (len:%d stat:%#x)\n",
+ len, sr);
+ return ret;
+ }
+ tx_fifo(buf++, qspi->io_base + QSPI_DR);
+ }
+
+ return 0;
+}
+
+static int stm32_qspi_tx_mm(struct stm32_qspi *qspi,
+ const struct spi_mem_op *op)
+{
+ memcpy_fromio(op->data.buf.in, qspi->mm_base + op->addr.val,
+ op->data.nbytes);
+ return 0;
+}
+
+static int stm32_qspi_tx(struct stm32_qspi *qspi, const struct spi_mem_op *op)
+{
+ if (!op->data.nbytes)
+ return 0;
+
+ if (qspi->fmode == CCR_FMODE_MM)
+ return stm32_qspi_tx_mm(qspi, op);
+
+ return stm32_qspi_tx_poll(qspi, op);
+}
+
+static int stm32_qspi_wait_nobusy(struct stm32_qspi *qspi)
+{
+ u32 sr;
+
+ return readl_relaxed_poll_timeout_atomic(qspi->io_base + QSPI_SR, sr,
+ !(sr & SR_BUSY), 1,
+ STM32_BUSY_TIMEOUT_US);
+}
+
+static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
+ const struct spi_mem_op *op)
+{
+ u32 cr, sr;
+ int err = 0;
+
+ if (!op->data.nbytes)
+ return stm32_qspi_wait_nobusy(qspi);
+
+ if (readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF)
+ goto out;
+
+ reinit_completion(&qspi->data_completion);
+ cr = readl_relaxed(qspi->io_base + QSPI_CR);
+ writel_relaxed(cr | CR_TCIE | CR_TEIE, qspi->io_base + QSPI_CR);
+
+ if (!wait_for_completion_interruptible_timeout(&qspi->data_completion,
+ msecs_to_jiffies(1000))) {
+ err = -ETIMEDOUT;
+ } else {
+ sr = readl_relaxed(qspi->io_base + QSPI_SR);
+ if (sr & SR_TEF)
+ err = -EIO;
+ }
+
+out:
+ /* clear flags */
+ writel_relaxed(FCR_CTCF | FCR_CTEF, qspi->io_base + QSPI_FCR);
+
+ return err;
+}
+
+static int stm32_qspi_get_mode(struct stm32_qspi *qspi, u8 buswidth)
+{
+ if (buswidth == 4)
+ return CCR_BUSWIDTH_4;
+
+ return buswidth;
+}
+
+static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
+ struct stm32_qspi_flash *flash = &qspi->flash[mem->spi->chip_select];
+ u32 ccr, cr, addr_max;
+ int timeout, err = 0;
+
+ dev_dbg(qspi->dev, "cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n",
+ op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
+ op->dummy.buswidth, op->data.buswidth,
+ op->addr.val, op->data.nbytes);
+
+ err = stm32_qspi_wait_nobusy(qspi);
+ if (err)
+ goto abort;
+
+ addr_max = op->addr.val + op->data.nbytes + 1;
+
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ if (addr_max < qspi->mm_size &&
+ op->addr.buswidth)
+ qspi->fmode = CCR_FMODE_MM;
+ else
+ qspi->fmode = CCR_FMODE_INDR;
+ } else {
+ qspi->fmode = CCR_FMODE_INDW;
+ }
+
+ cr = readl_relaxed(qspi->io_base + QSPI_CR);
+ cr &= ~CR_PRESC_MASK & ~CR_FSEL;
+ cr |= FIELD_PREP(CR_PRESC_MASK, flash->presc);
+ cr |= FIELD_PREP(CR_FSEL, flash->cs);
+ writel_relaxed(cr, qspi->io_base + QSPI_CR);
+
+ if (op->data.nbytes)
+ writel_relaxed(op->data.nbytes - 1,
+ qspi->io_base + QSPI_DLR);
+ else
+ qspi->fmode = CCR_FMODE_INDW;
+
+ ccr = qspi->fmode;
+ ccr |= FIELD_PREP(CCR_INST_MASK, op->cmd.opcode);
+ ccr |= FIELD_PREP(CCR_IMODE_MASK,
+ stm32_qspi_get_mode(qspi, op->cmd.buswidth));
+
+ if (op->addr.nbytes) {
+ ccr |= FIELD_PREP(CCR_ADMODE_MASK,
+ stm32_qspi_get_mode(qspi, op->addr.buswidth));
+ ccr |= FIELD_PREP(CCR_ADSIZE_MASK, op->addr.nbytes - 1);
+ }
+
+ if (op->dummy.buswidth && op->dummy.nbytes)
+ ccr |= FIELD_PREP(CCR_DCYC_MASK,
+ op->dummy.nbytes * 8 / op->dummy.buswidth);
+
+ if (op->data.nbytes) {
+ ccr |= FIELD_PREP(CCR_DMODE_MASK,
+ stm32_qspi_get_mode(qspi, op->data.buswidth));
+ }
+
+ writel_relaxed(ccr, qspi->io_base + QSPI_CCR);
+
+ if (op->addr.nbytes && qspi->fmode != CCR_FMODE_MM)
+ writel_relaxed(op->addr.val, qspi->io_base + QSPI_AR);
+
+ err = stm32_qspi_tx(qspi, op);
+
+ /*
+ * Abort in:
+ * -error case
+ * -read memory map: prefetching must be stopped if we read the last
+ * byte of device (device size - fifo size). like device size is not
+ * knows, the prefetching is always stop.
+ */
+ if (err || qspi->fmode == CCR_FMODE_MM)
+ goto abort;
+
+ /* wait end of tx in indirect mode */
+ err = stm32_qspi_wait_cmd(qspi, op);
+ if (err)
+ goto abort;
+
+ return 0;
+
+abort:
+ cr = readl_relaxed(qspi->io_base + QSPI_CR) | CR_ABORT;
+ writel_relaxed(cr, qspi->io_base + QSPI_CR);
+
+ /* wait clear of abort bit by hw */
+ timeout = readl_relaxed_poll_timeout_atomic(qspi->io_base + QSPI_CR,
+ cr, !(cr & CR_ABORT), 1,
+ STM32_ABT_TIMEOUT_US);
+
+ writel_relaxed(FCR_CTCF, qspi->io_base + QSPI_FCR);
+
+ if (err || timeout)
+ dev_err(qspi->dev, "%s err:%d abort timeout:%d\n",
+ __func__, err, timeout);
+
+ return err;
+}
+
+static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
+ int ret;
+
+ mutex_lock(&qspi->lock);
+ ret = stm32_qspi_send(mem, op);
+ mutex_unlock(&qspi->lock);
+
+ return ret;
+}
+
+static int stm32_qspi_setup(struct spi_device *spi)
+{
+ struct spi_controller *ctrl = spi->master;
+ struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl);
+ struct stm32_qspi_flash *flash;
+ u32 cr, presc;
+
+ if (ctrl->busy)
+ return -EBUSY;
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ presc = DIV_ROUND_UP(qspi->clk_rate, spi->max_speed_hz) - 1;
+
+ flash = &qspi->flash[spi->chip_select];
+ flash->qspi = qspi;
+ flash->cs = spi->chip_select;
+ flash->presc = presc;
+
+ mutex_lock(&qspi->lock);
+ writel_relaxed(LPTR_DFT_TIMEOUT, qspi->io_base + QSPI_LPTR);
+ cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_TCEN | CR_SSHIFT | CR_EN;
+ writel_relaxed(cr, qspi->io_base + QSPI_CR);
+
+ /* set dcr fsize to max address */
+ writel_relaxed(DCR_FSIZE_MASK, qspi->io_base + QSPI_DCR);
+ mutex_unlock(&qspi->lock);
+
+ return 0;
+}
+
+/*
+ * no special host constraint, so use default spi_mem_default_supports_op
+ * to check supported mode.
+ */
+static const struct spi_controller_mem_ops stm32_qspi_mem_ops = {
+ .exec_op = stm32_qspi_exec_op,
+};
+
+static void stm32_qspi_release(struct stm32_qspi *qspi)
+{
+ /* disable qspi */
+ writel_relaxed(0, qspi->io_base + QSPI_CR);
+ mutex_destroy(&qspi->lock);
+ clk_disable_unprepare(qspi->clk);
+}
+
+static int stm32_qspi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_controller *ctrl;
+ struct reset_control *rstc;
+ struct stm32_qspi *qspi;
+ struct resource *res;
+ int ret, irq;
+
+ ctrl = spi_alloc_master(dev, sizeof(*qspi));
+ if (!ctrl)
+ return -ENOMEM;
+
+ qspi = spi_controller_get_devdata(ctrl);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi");
+ qspi->io_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(qspi->io_base))
+ return PTR_ERR(qspi->io_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm");
+ qspi->mm_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(qspi->mm_base))
+ return PTR_ERR(qspi->mm_base);
+
+ qspi->mm_size = resource_size(res);
+ if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
+ dev_name(dev), qspi);
+ if (ret) {
+ dev_err(dev, "failed to request irq\n");
+ return ret;
+ }
+
+ init_completion(&qspi->data_completion);
+
+ qspi->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(qspi->clk))
+ return PTR_ERR(qspi->clk);
+
+ qspi->clk_rate = clk_get_rate(qspi->clk);
+ if (!qspi->clk_rate)
+ return -EINVAL;
+
+ ret = clk_prepare_enable(qspi->clk);
+ if (ret) {
+ dev_err(dev, "can not enable the clock\n");
+ return ret;
+ }
+
+ rstc = devm_reset_control_get_exclusive(dev, NULL);
+ if (!IS_ERR(rstc)) {
+ reset_control_assert(rstc);
+ udelay(2);
+ reset_control_deassert(rstc);
+ }
+
+ qspi->dev = dev;
+ platform_set_drvdata(pdev, qspi);
+ mutex_init(&qspi->lock);
+
+ ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD
+ | SPI_TX_DUAL | SPI_TX_QUAD;
+ ctrl->setup = stm32_qspi_setup;
+ ctrl->bus_num = -1;
+ ctrl->mem_ops = &stm32_qspi_mem_ops;
+ ctrl->num_chipselect = STM32_QSPI_MAX_NORCHIP;
+ ctrl->dev.of_node = dev->of_node;
+
+ ret = devm_spi_register_master(dev, ctrl);
+ if (ret)
+ goto err_spi_register;
+
+ return 0;
+
+err_spi_register:
+ stm32_qspi_release(qspi);
+
+ return ret;
+}
+
+static int stm32_qspi_remove(struct platform_device *pdev)
+{
+ struct stm32_qspi *qspi = platform_get_drvdata(pdev);
+
+ stm32_qspi_release(qspi);
+ return 0;
+}
+
+static const struct of_device_id stm32_qspi_match[] = {
+ {.compatible = "st,stm32f469-qspi"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, stm32_qspi_match);
+
+static struct platform_driver stm32_qspi_driver = {
+ .probe = stm32_qspi_probe,
+ .remove = stm32_qspi_remove,
+ .driver = {
+ .name = "stm32-qspi",
+ .of_match_table = stm32_qspi_match,
+ },
+};
+module_platform_driver(stm32_qspi_driver);
+
+MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 quad spi driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 9da0bc5a036c..6ca59406b0b7 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* SPI init/core code
*
* Copyright (C) 2005 David Brownell
* Copyright (C) 2008 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/kernel.h>
@@ -60,6 +51,7 @@ static void spidev_release(struct device *dev)
spi->controller->cleanup(spi);
spi_controller_put(spi->controller);
+ kfree(spi->driver_override);
kfree(spi);
}
@@ -77,6 +69,51 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
}
static DEVICE_ATTR_RO(modalias);
+static ssize_t driver_override_store(struct device *dev,
+ struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ const char *end = memchr(buf, '\n', count);
+ const size_t len = end ? end - buf : count;
+ const char *driver_override, *old;
+
+ /* We need to keep extra room for a newline when displaying value */
+ if (len >= (PAGE_SIZE - 1))
+ return -EINVAL;
+
+ driver_override = kstrndup(buf, len, GFP_KERNEL);
+ if (!driver_override)
+ return -ENOMEM;
+
+ device_lock(dev);
+ old = spi->driver_override;
+ if (len) {
+ spi->driver_override = driver_override;
+ } else {
+ /* Emptry string, disable driver override */
+ spi->driver_override = NULL;
+ kfree(driver_override);
+ }
+ device_unlock(dev);
+ kfree(old);
+
+ return count;
+}
+
+static ssize_t driver_override_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ const struct spi_device *spi = to_spi_device(dev);
+ ssize_t len;
+
+ device_lock(dev);
+ len = snprintf(buf, PAGE_SIZE, "%s\n", spi->driver_override ? : "");
+ device_unlock(dev);
+ return len;
+}
+static DEVICE_ATTR_RW(driver_override);
+
#define SPI_STATISTICS_ATTRS(field, file) \
static ssize_t spi_controller_##field##_show(struct device *dev, \
struct device_attribute *attr, \
@@ -158,6 +195,7 @@ SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
static struct attribute *spi_dev_attrs[] = {
&dev_attr_modalias.attr,
+ &dev_attr_driver_override.attr,
NULL,
};
@@ -305,6 +343,10 @@ static int spi_match_device(struct device *dev, struct device_driver *drv)
const struct spi_device *spi = to_spi_device(dev);
const struct spi_driver *sdrv = to_spi_driver(drv);
+ /* Check override first, and if set, only use the named driver */
+ if (spi->driver_override)
+ return strcmp(spi->driver_override, drv->name) == 0;
+
/* Attempt an OF style match */
if (of_driver_match_device(dev, drv))
return 1;
@@ -733,7 +775,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
enable = !enable;
if (gpio_is_valid(spi->cs_gpio)) {
- gpio_set_value(spi->cs_gpio, !enable);
+ /* Honour the SPI_NO_CS flag */
+ if (!(spi->mode & SPI_NO_CS))
+ gpio_set_value(spi->cs_gpio, !enable);
/* Some SPI masters need both GPIO CS & slave_select */
if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
spi->controller->set_cs)
@@ -2783,8 +2827,10 @@ int spi_setup(struct spi_device *spi)
return -EINVAL;
/* help drivers fail *cleanly* when they need options
* that aren't supported with their current controller
+ * SPI_CS_WORD has a fallback software implementation,
+ * so it is ignored here.
*/
- bad_bits = spi->mode & ~spi->controller->mode_bits;
+ bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD);
ugly_bits = bad_bits &
(SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
if (ugly_bits) {
@@ -2838,6 +2884,35 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
if (list_empty(&message->transfers))
return -EINVAL;
+ /* If an SPI controller does not support toggling the CS line on each
+ * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO
+ * for the CS line, we can emulate the CS-per-word hardware function by
+ * splitting transfers into one-word transfers and ensuring that
+ * cs_change is set for each transfer.
+ */
+ if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) ||
+ gpio_is_valid(spi->cs_gpio))) {
+ size_t maxsize;
+ int ret;
+
+ maxsize = (spi->bits_per_word + 7) / 8;
+
+ /* spi_split_transfers_maxsize() requires message->spi */
+ message->spi = spi;
+
+ ret = spi_split_transfers_maxsize(ctlr, message, maxsize,
+ GFP_KERNEL);
+ if (ret)
+ return ret;
+
+ list_for_each_entry(xfer, &message->transfers, transfer_list) {
+ /* don't change cs_change on the last entry in the list */
+ if (list_is_last(&xfer->transfer_list, &message->transfers))
+ break;
+ xfer->cs_change = 1;
+ }
+ }
+
/* Half-duplex links include original MicroWire, and ones with
* only one data pin like SPI_3WIRE (switches direction) or where
* either MOSI or MISO is missing. They can also be caused by
@@ -3323,20 +3398,23 @@ EXPORT_SYMBOL_GPL(spi_write_then_read);
/*-------------------------------------------------------------------------*/
-#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+#if IS_ENABLED(CONFIG_OF)
static int __spi_of_device_match(struct device *dev, void *data)
{
return dev->of_node == data;
}
/* must call put_device() when done with returned spi_device device */
-static struct spi_device *of_find_spi_device_by_node(struct device_node *node)
+struct spi_device *of_find_spi_device_by_node(struct device_node *node)
{
struct device *dev = bus_find_device(&spi_bus_type, NULL, node,
__spi_of_device_match);
return dev ? to_spi_device(dev) : NULL;
}
+EXPORT_SYMBOL_GPL(of_find_spi_device_by_node);
+#endif /* IS_ENABLED(CONFIG_OF) */
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
static int __spi_of_controller_match(struct device *dev, const void *data)
{
return dev->of_node == data;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index cda10719d1d1..b0c76e2626ce 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -669,6 +669,7 @@ static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "lineartechnology,ltc2488" },
{ .compatible = "ge,achc" },
{ .compatible = "semtech,sx1301" },
+ { .compatible = "lwn,bk4" },
{},
};
MODULE_DEVICE_TABLE(of, spidev_dt_ids);
@@ -724,11 +725,9 @@ static int spidev_probe(struct spi_device *spi)
* compatible string, it is a Linux implementation thing
* rather than a description of the hardware.
*/
- if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) {
- dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n");
- WARN_ON(spi->dev.of_node &&
- !of_match_device(spidev_dt_ids, &spi->dev));
- }
+ WARN(spi->dev.of_node &&
+ of_device_is_compatible(spi->dev.of_node, "spidev"),
+ "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node);
spidev_probe_acpi(spi);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6925828f9f25..2c4755032475 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1705,6 +1705,10 @@ static inline int pci_irqd_intx_xlate(struct irq_domain *d,
unsigned long *out_hwirq,
unsigned int *out_type)
{ return -EINVAL; }
+
+static inline const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
+ struct pci_dev *dev)
+{ return NULL; }
#endif /* CONFIG_PCI */
/* Include architecture-dependent settings and functions */
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
index f4edcb03c40c..0638fb6353bc 100644
--- a/include/linux/platform_data/spi-davinci.h
+++ b/include/linux/platform_data/spi-davinci.h
@@ -36,9 +36,6 @@ enum {
* @num_chipselect: number of chipselects supported by this SPI master
* @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
* controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
- * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- * to populate if all chip-selects are internal.
* @cshold_bug: set this to true if the SPI controller on your chip requires
* a write to CSHOLD bit in between transfers (like in DM355).
* @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
@@ -48,7 +45,6 @@ struct davinci_spi_platform_data {
u8 version;
u8 num_chipselect;
u8 intr_line;
- u8 *chip_sel;
u8 prescaler_limit;
bool cshold_bug;
enum dma_event_q dma_event_q;
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 13b4244d44c1..979087e021f3 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -196,6 +196,7 @@ enum pxa_ssp_type {
PXA27x_SSP,
PXA3xx_SSP,
PXA168_SSP,
+ MMP2_SSP,
PXA910_SSP,
CE4100_SSP,
QUARK_X1000_SSP,
@@ -217,7 +218,7 @@ struct ssp_device {
const char *label;
int port_id;
- int type;
+ enum pxa_ssp_type type;
int use_count;
int irq;
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 5d6144977828..3bcd67fd5548 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -225,19 +225,14 @@ struct geni_se {
#define HW_VER_MINOR_SHFT 16
#define HW_VER_STEP_MASK GENMASK(15, 0)
+#define GENI_SE_VERSION_MAJOR(ver) ((ver & HW_VER_MAJOR_MASK) >> HW_VER_MAJOR_SHFT)
+#define GENI_SE_VERSION_MINOR(ver) ((ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT)
+#define GENI_SE_VERSION_STEP(ver) (ver & HW_VER_STEP_MASK)
+
#if IS_ENABLED(CONFIG_QCOM_GENI_SE)
u32 geni_se_get_qup_hw_version(struct geni_se *se);
-#define geni_se_get_wrapper_version(se, major, minor, step) do { \
- u32 ver; \
-\
- ver = geni_se_get_qup_hw_version(se); \
- major = (ver & HW_VER_MAJOR_MASK) >> HW_VER_MAJOR_SHFT; \
- minor = (ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT; \
- step = version & HW_VER_STEP_MASK; \
-} while (0)
-
/**
* geni_se_read_proto() - Read the protocol configured for a serial engine
* @se: Pointer to the concerned serial engine.
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a64235e05321..6be77fa5ab90 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -1,15 +1,6 @@
-/*
- * Copyright (C) 2005 David Brownell
+/* SPDX-License-Identifier: GPL-2.0-or-later
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright (C) 2005 David Brownell
*/
#ifndef __LINUX_SPI_H
@@ -163,10 +154,12 @@ struct spi_device {
#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
#define SPI_RX_DUAL 0x400 /* receive with 2 wires */
#define SPI_RX_QUAD 0x800 /* receive with 4 wires */
+#define SPI_CS_WORD 0x1000 /* toggle cs after each word */
int irq;
void *controller_state;
void *controller_data;
char modalias[SPI_NAME_SIZE];
+ const char *driver_override;
int cs_gpio; /* chip select gpio */
/* the statistics */
@@ -177,7 +170,6 @@ struct spi_device {
* the controller talks to each chip, like:
* - memory packing (12 bit samples into low bits, others zeroed)
* - priority
- * - drop chipselect after each word
* - chipselect delays
* - ...
*/
@@ -711,6 +703,8 @@ extern void spi_res_release(struct spi_controller *ctlr,
* @delay_usecs: microseconds to delay after this transfer before
* (optionally) changing the chipselect status, then starting
* the next transfer or completing this @spi_message.
+ * @word_delay: clock cycles to inter word delay after each word size
+ * (set by bits_per_word) transmission.
* @transfer_list: transfers are sequenced through @spi_message.transfers
* @tx_sg: Scatterlist for transmit, currently not for client use
* @rx_sg: Scatterlist for receive, currently not for client use
@@ -793,6 +787,7 @@ struct spi_transfer {
u8 bits_per_word;
u16 delay_usecs;
u32 speed_hz;
+ u16 word_delay;
struct list_head transfer_list;
};
@@ -1277,7 +1272,6 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
{ return 0; }
#endif
-
/* If you're hotplugging an adapter with devices (parport, usb, etc)
* use spi_new_device() to describe each device. You can also call
* spi_unregister_device() to start making that device vanish, but
@@ -1309,6 +1303,22 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer)
return list_is_last(&xfer->transfer_list, &ctlr->cur_msg->transfers);
}
+/* OF support code */
+#if IS_ENABLED(CONFIG_OF)
+
+/* must call put_device() when done with returned spi_device device */
+extern struct spi_device *
+of_find_spi_device_by_node(struct device_node *node);
+
+#else
+
+static inline struct spi_device *
+of_find_spi_device_by_node(struct device_node *node)
+{
+ return NULL;
+}
+
+#endif /* IS_ENABLED(CONFIG_OF) */
/* Compatibility layer */
#define spi_master spi_controller
diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c
index 8c590cd1171a..4c12e6aea5d5 100644
--- a/tools/spi/spidev_test.c
+++ b/tools/spi/spidev_test.c
@@ -73,12 +73,12 @@ static void hex_dump(const void *src, size_t length, size_t line_size,
while (i++ % line_size)
printf("__ ");
}
- printf(" | "); /* right close */
+ printf(" |");
while (line < address) {
c = *line++;
- printf("%c", (c < 33 || c == 255) ? 0x2E : c);
+ printf("%c", (c < 32 || c > 126) ? '.' : c);
}
- printf("\n");
+ printf("|\n");
if (length > 0)
printf("%s | ", prefix);
}