diff options
| -rw-r--r-- | Documentation/networking/multiqueue.txt | 79 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/cpmac.c | 14 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 6 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 40 | ||||
| -rw-r--r-- | drivers/net/s2io.c | 47 | ||||
| -rw-r--r-- | include/linux/netdevice.h | 14 | ||||
| -rw-r--r-- | include/linux/skbuff.h | 10 | ||||
| -rw-r--r-- | net/mac80211/Kconfig | 3 |
9 files changed, 9 insertions, 212 deletions
diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt index ea5a42e8f79f..e6dc1ee9e8f1 100644 --- a/Documentation/networking/multiqueue.txt +++ b/Documentation/networking/multiqueue.txt @@ -3,19 +3,11 @@ =========================================== Section 1: Base driver requirements for implementing multiqueue support -Section 2: Qdisc support for multiqueue devices -Section 3: Brief howto using PRIO or RR for multiqueue devices - Intro: Kernel support for multiqueue devices --------------------------------------------------------- -Kernel support for multiqueue devices is only an API that is presented to the -netdevice layer for base drivers to implement. This feature is part of the -core networking stack, and all network devices will be running on the -multiqueue-aware stack. If a base driver only has one queue, then these -changes are transparent to that driver. - +Kernel support for multiqueue devices is always present. Section 1: Base driver requirements for implementing multiqueue support ----------------------------------------------------------------------- @@ -43,73 +35,4 @@ bitmap on device initialization. Below is an example from e1000: netdev->features |= NETIF_F_MULTI_QUEUE; #endif - -Section 2: Qdisc support for multiqueue devices ------------------------------------------------ - -Currently two qdiscs support multiqueue devices. A new round-robin qdisc, -sch_rr, and sch_prio. The qdisc is responsible for classifying the skb's to -bands and queues, and will store the queue mapping into skb->queue_mapping. -Use this field in the base driver to determine which queue to send the skb -to. - -sch_rr has been added for hardware that doesn't want scheduling policies from -software, so it's a straight round-robin qdisc. It uses the same syntax and -classification priomap that sch_prio uses, so it should be intuitive to -configure for people who've used sch_prio. - -In order to utilitize the multiqueue features of the qdiscs, the network -device layer needs to enable multiple queue support. This can be done by -selecting NETDEVICES_MULTIQUEUE under Drivers. - -The PRIO qdisc naturally plugs into a multiqueue device. If -NETDEVICES_MULTIQUEUE is selected, then on qdisc load, the number of -bands requested is compared to the number of queues on the hardware. If they -are equal, it sets a one-to-one mapping up between the queues and bands. If -they're not equal, it will not load the qdisc. This is the same behavior -for RR. Once the association is made, any skb that is classified will have -skb->queue_mapping set, which will allow the driver to properly queue skb's -to multiple queues. - - -Section 3: Brief howto using PRIO and RR for multiqueue devices ---------------------------------------------------------------- - -The userspace command 'tc,' part of the iproute2 package, is used to configure -qdiscs. To add the PRIO qdisc to your network device, assuming the device is -called eth0, run the following command: - -# tc qdisc add dev eth0 root handle 1: prio bands 4 multiqueue - -This will create 4 bands, 0 being highest priority, and associate those bands -to the queues on your NIC. Assuming eth0 has 4 Tx queues, the band mapping -would look like: - -band 0 => queue 0 -band 1 => queue 1 -band 2 => queue 2 -band 3 => queue 3 - -Traffic will begin flowing through each queue if your TOS values are assigning -traffic across the various bands. For example, ssh traffic will always try to -go out band 0 based on TOS -> Linux priority conversion (realtime traffic), -so it will be sent out queue 0. ICMP traffic (pings) fall into the "normal" -traffic classification, which is band 1. Therefore pings will be send out -queue 1 on the NIC. - -Note the use of the multiqueue keyword. This is only in versions of iproute2 -that support multiqueue networking devices; if this is omitted when loading -a qdisc onto a multiqueue device, the qdisc will load and operate the same -if it were loaded onto a single-queue device (i.e. - sends all traffic to -queue 0). - -Another alternative to multiqueue band allocation can be done by using the -multiqueue option and specify 0 bands. If this is the case, the qdisc will -allocate the number of bands to equal the number of queues that the device -reports, and bring the qdisc online. - -The behavior of tc filters remains the same, where it will override TOS priority -classification. - - Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ef733abc857d..4675c1bd6fb9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -26,14 +26,6 @@ menuconfig NETDEVICES # that for each of the symbols. if NETDEVICES -config NETDEVICES_MULTIQUEUE - bool "Netdevice multiple hardware queue support" - ---help--- - Say Y here if you want to allow the network stack to use multiple - hardware TX queues on an ethernet device. - - Most people will say N here. - config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 7f3f62e1b113..d630e2a72f42 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -569,11 +569,7 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) len = max(skb->len, ETH_ZLEN); queue = skb_get_queue_mapping(skb); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE netif_stop_subqueue(dev, queue); -#else - netif_stop_queue(dev); -#endif desc = &priv->desc_ring[queue]; if (unlikely(desc->dataflags & CPMAC_OWN)) { @@ -626,24 +622,14 @@ static void cpmac_end_xmit(struct net_device *dev, int queue) dev_kfree_skb_irq(desc->skb); desc->skb = NULL; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (netif_subqueue_stopped(dev, queue)) netif_wake_subqueue(dev, queue); -#else - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); -#endif } else { if (netif_msg_tx_err(priv) && net_ratelimit()) printk(KERN_WARNING "%s: end_xmit: spurious interrupt\n", dev->name); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (netif_subqueue_stopped(dev, queue)) netif_wake_subqueue(dev, queue); -#else - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); -#endif } } diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 12990b1fe7e4..81b769093d22 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -252,21 +252,15 @@ static int ixgbe_set_tso(struct net_device *netdev, u32 data) netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; } else { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE struct ixgbe_adapter *adapter = netdev_priv(netdev); int i; -#endif netif_stop_queue(netdev); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE for (i = 0; i < adapter->num_tx_queues; i++) netif_stop_subqueue(netdev, i); -#endif netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO6; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE for (i = 0; i < adapter->num_tx_queues; i++) netif_start_subqueue(netdev, i); -#endif netif_start_queue(netdev); } return 0; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index b37d618d8e2a..10a1c8c5cda1 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -266,28 +266,16 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_adapter *adapter, * sees the new next_to_clean. */ smp_mb(); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) && !test_bit(__IXGBE_DOWN, &adapter->state)) { netif_wake_subqueue(netdev, tx_ring->queue_index); adapter->restart_queue++; } -#else - if (netif_queue_stopped(netdev) && - !test_bit(__IXGBE_DOWN, &adapter->state)) { - netif_wake_queue(netdev); - adapter->restart_queue++; - } -#endif } if (adapter->detect_tx_hung) if (ixgbe_check_tx_hang(adapter, tx_ring, eop, eop_desc)) -#ifdef CONFIG_NETDEVICES_MULTIQUEUE netif_stop_subqueue(netdev, tx_ring->queue_index); -#else - netif_stop_queue(netdev); -#endif if (total_tx_packets >= tx_ring->work_limit) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, tx_ring->eims_value); @@ -2192,11 +2180,7 @@ static void __devinit ixgbe_set_num_queues(struct ixgbe_adapter *adapter) case (IXGBE_FLAG_RSS_ENABLED): rss_m = 0xF; nrq = rss_i; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE ntq = rss_i; -#else - ntq = 1; -#endif break; case 0: default: @@ -2370,10 +2354,8 @@ try_msi: } out: -#ifdef CONFIG_NETDEVICES_MULTIQUEUE /* Notify the stack of the (possibly) reduced Tx Queue count. */ adapter->netdev->egress_subqueue_count = adapter->num_tx_queues; -#endif return err; } @@ -2910,9 +2892,7 @@ static void ixgbe_watchdog(unsigned long data) struct net_device *netdev = adapter->netdev; bool link_up; u32 link_speed = 0; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE int i; -#endif adapter->hw.mac.ops.check_link(&adapter->hw, &(link_speed), &link_up); @@ -2934,10 +2914,8 @@ static void ixgbe_watchdog(unsigned long data) netif_carrier_on(netdev); netif_wake_queue(netdev); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE for (i = 0; i < adapter->num_tx_queues; i++) netif_wake_subqueue(netdev, i); -#endif } else { /* Force detection of hung controller */ adapter->detect_tx_hung = true; @@ -3264,11 +3242,7 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE netif_stop_subqueue(netdev, tx_ring->queue_index); -#else - netif_stop_queue(netdev); -#endif /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); * but since that doesn't exist yet, just open code it. */ @@ -3280,11 +3254,7 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev, return -EBUSY; /* A reprieve! - use start_queue because it doesn't call schedule */ -#ifdef CONFIG_NETDEVICES_MULTIQUEUE netif_wake_subqueue(netdev, tx_ring->queue_index); -#else - netif_wake_queue(netdev); -#endif ++adapter->restart_queue; return 0; } @@ -3312,9 +3282,7 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; unsigned int nr_frags = skb_shinfo(skb)->nr_frags; len -= skb->data_len; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping; -#endif tx_ring = &adapter->tx_ring[r_idx]; @@ -3502,11 +3470,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_save_state(pdev); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES); -#else - netdev = alloc_etherdev(sizeof(struct ixgbe_adapter)); -#endif if (!netdev) { err = -ENOMEM; goto err_alloc_etherdev; @@ -3598,9 +3562,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE netdev->features |= NETIF_F_MULTI_QUEUE; -#endif /* make sure the EEPROM is good */ if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) { @@ -3668,10 +3630,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netif_carrier_off(netdev); netif_stop_queue(netdev); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE for (i = 0; i < adapter->num_tx_queues; i++) netif_stop_subqueue(netdev, i); -#endif ixgbe_napi_add_all(adapter); diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e7a3dbec674c..51a91154125d 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -546,13 +546,10 @@ static struct pci_driver s2io_driver = { static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp) { int i; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) { for (i = 0; i < sp->config.tx_fifo_num; i++) netif_stop_subqueue(sp->dev, i); - } else -#endif - { + } else { for (i = 0; i < sp->config.tx_fifo_num; i++) sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP; netif_stop_queue(sp->dev); @@ -561,12 +558,9 @@ static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp) static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) netif_stop_subqueue(sp->dev, fifo_no); - else -#endif - { + else { sp->mac_control.fifos[fifo_no].queue_state = FIFO_QUEUE_STOP; netif_stop_queue(sp->dev); @@ -576,13 +570,10 @@ static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no) static inline void s2io_start_all_tx_queue(struct s2io_nic *sp) { int i; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) { for (i = 0; i < sp->config.tx_fifo_num; i++) netif_start_subqueue(sp->dev, i); - } else -#endif - { + } else { for (i = 0; i < sp->config.tx_fifo_num; i++) sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; netif_start_queue(sp->dev); @@ -591,12 +582,9 @@ static inline void s2io_start_all_tx_queue(struct s2io_nic *sp) static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) netif_start_subqueue(sp->dev, fifo_no); - else -#endif - { + else { sp->mac_control.fifos[fifo_no].queue_state = FIFO_QUEUE_START; netif_start_queue(sp->dev); @@ -606,13 +594,10 @@ static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no) static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp) { int i; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) { for (i = 0; i < sp->config.tx_fifo_num; i++) netif_wake_subqueue(sp->dev, i); - } else -#endif - { + } else { for (i = 0; i < sp->config.tx_fifo_num; i++) sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; netif_wake_queue(sp->dev); @@ -623,13 +608,10 @@ static inline void s2io_wake_tx_queue( struct fifo_info *fifo, int cnt, u8 multiq) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (multiq) { if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no)) netif_wake_subqueue(fifo->dev, fifo->fifo_no); - } else -#endif - if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) { + } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) { if (netif_queue_stopped(fifo->dev)) { fifo->queue_state = FIFO_QUEUE_START; netif_wake_queue(fifo->dev); @@ -4189,15 +4171,12 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_LOCKED; } -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) { if (__netif_subqueue_stopped(dev, fifo->fifo_no)) { spin_unlock_irqrestore(&fifo->tx_lock, flags); return NETDEV_TX_BUSY; } - } else -#endif - if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) { + } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) { if (netif_queue_stopped(dev)) { spin_unlock_irqrestore(&fifo->tx_lock, flags); return NETDEV_TX_BUSY; @@ -7633,12 +7612,6 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, DBG_PRINT(ERR_DBG, "tx fifos\n"); } -#ifndef CONFIG_NETDEVICES_MULTIQUEUE - if (multiq) { - DBG_PRINT(ERR_DBG, "s2io: Multiqueue support not enabled\n"); - multiq = 0; - } -#endif if (multiq) *dev_multiq = multiq; @@ -7783,12 +7756,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) pci_disable_device(pdev); return -ENODEV; } -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (dev_multiq) dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num); else -#endif - dev = alloc_etherdev(sizeof(struct s2io_nic)); + dev = alloc_etherdev(sizeof(struct s2io_nic)); if (dev == NULL) { DBG_PRINT(ERR_DBG, "Device allocation failed\n"); pci_disable_device(pdev); @@ -7979,10 +7950,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->features |= NETIF_F_UFO; dev->features |= NETIF_F_HW_CSUM; } -#ifdef CONFIG_NETDEVICES_MULTIQUEUE if (config->multiq) dev->features |= NETIF_F_MULTI_QUEUE; -#endif dev->tx_timeout = &s2io_tx_watchdog; dev->watchdog_timeo = WATCH_DOG_TIMEOUT; INIT_WORK(&sp->rst_timer_task, s2io_restart_nic); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c8d5f128858d..e2d931f9b700 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1043,9 +1043,7 @@ static inline int netif_running(const struct net_device *dev) */ static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE clear_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state); -#endif } /** @@ -1057,13 +1055,11 @@ static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index) */ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif set_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state); -#endif } /** @@ -1076,12 +1072,8 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index) static inline int __netif_subqueue_stopped(const struct net_device *dev, u16 queue_index) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE return test_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state); -#else - return 0; -#endif } static inline int netif_subqueue_stopped(const struct net_device *dev, @@ -1099,7 +1091,6 @@ static inline int netif_subqueue_stopped(const struct net_device *dev, */ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; @@ -1107,7 +1098,6 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index) if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state)) __netif_schedule(&dev->tx_queue); -#endif } /** @@ -1119,11 +1109,7 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index) */ static inline int netif_is_multiqueue(const struct net_device *dev) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE return (!!(NETIF_F_MULTI_QUEUE & dev->features)); -#else - return 0; -#endif } /* Use this variant when it is known for sure that it diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2220b9e2dab0..8f10e3d08fd9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -305,9 +305,7 @@ struct sk_buff { #endif int iif; -#ifdef CONFIG_NETDEVICES_MULTIQUEUE __u16 queue_mapping; -#endif #ifdef CONFIG_NET_SCHED __u16 tc_index; /* traffic control index */ #ifdef CONFIG_NET_CLS_ACT @@ -1671,25 +1669,17 @@ static inline void skb_init_secmark(struct sk_buff *skb) static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE skb->queue_mapping = queue_mapping; -#endif } static inline u16 skb_get_queue_mapping(struct sk_buff *skb) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE return skb->queue_mapping; -#else - return 0; -#endif } static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from) { -#ifdef CONFIG_NETDEVICES_MULTIQUEUE to->queue_mapping = from->queue_mapping; -#endif } static inline int skb_is_gso(const struct sk_buff *skb) diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 40f1add17753..d2038418e2bd 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -15,14 +15,11 @@ config MAC80211_QOS def_bool y depends on MAC80211 depends on NET_SCHED - depends on NETDEVICES_MULTIQUEUE comment "QoS/HT support disabled" depends on MAC80211 && !MAC80211_QOS comment "QoS/HT support needs CONFIG_NET_SCHED" depends on MAC80211 && !NET_SCHED -comment "QoS/HT support needs CONFIG_NETDEVICES_MULTIQUEUE" - depends on MAC80211 && !NETDEVICES_MULTIQUEUE menu "Rate control algorithm selection" depends on MAC80211 != n |