diff options
| -rw-r--r-- | drivers/net/wireless/p54/net2280.h | 451 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54usb.h | 13 |
2 files changed, 12 insertions, 452 deletions
diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h deleted file mode 100644 index aedfaf24f386..000000000000 --- a/drivers/net/wireless/p54/net2280.h +++ /dev/null @@ -1,451 +0,0 @@ -#ifndef NET2280_H -#define NET2280_H -/* - * NetChip 2280 high/full speed USB device controller. - * Unlike many such controllers, this one talks PCI. - */ - -/* - * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) - * Copyright (C) 2003 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -/*-------------------------------------------------------------------------*/ - -/* NET2280 MEMORY MAPPED REGISTERS - * - * The register layout came from the chip documentation, and the bit - * number definitions were extracted from chip specification. - * - * Use the shift operator ('<<') to build bit masks, with readl/writel - * to access the registers through PCI. - */ - -/* main registers, BAR0 + 0x0000 */ -struct net2280_regs { - /* offset 0x0000 */ - __le32 devinit; -#define LOCAL_CLOCK_FREQUENCY 8 -#define FORCE_PCI_RESET 7 -#define PCI_ID 6 -#define PCI_ENABLE 5 -#define FIFO_SOFT_RESET 4 -#define CFG_SOFT_RESET 3 -#define PCI_SOFT_RESET 2 -#define USB_SOFT_RESET 1 -#define M8051_RESET 0 - __le32 eectl; -#define EEPROM_ADDRESS_WIDTH 23 -#define EEPROM_CHIP_SELECT_ACTIVE 22 -#define EEPROM_PRESENT 21 -#define EEPROM_VALID 20 -#define EEPROM_BUSY 19 -#define EEPROM_CHIP_SELECT_ENABLE 18 -#define EEPROM_BYTE_READ_START 17 -#define EEPROM_BYTE_WRITE_START 16 -#define EEPROM_READ_DATA 8 -#define EEPROM_WRITE_DATA 0 - __le32 eeclkfreq; - u32 _unused0; - /* offset 0x0010 */ - - __le32 pciirqenb0; /* interrupt PCI master ... */ -#define SETUP_PACKET_INTERRUPT_ENABLE 7 -#define ENDPOINT_F_INTERRUPT_ENABLE 6 -#define ENDPOINT_E_INTERRUPT_ENABLE 5 -#define ENDPOINT_D_INTERRUPT_ENABLE 4 -#define ENDPOINT_C_INTERRUPT_ENABLE 3 -#define ENDPOINT_B_INTERRUPT_ENABLE 2 -#define ENDPOINT_A_INTERRUPT_ENABLE 1 -#define ENDPOINT_0_INTERRUPT_ENABLE 0 - __le32 pciirqenb1; -#define PCI_INTERRUPT_ENABLE 31 -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 -#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18 -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 -#define GPIO_INTERRUPT_ENABLE 13 -#define DMA_D_INTERRUPT_ENABLE 12 -#define DMA_C_INTERRUPT_ENABLE 11 -#define DMA_B_INTERRUPT_ENABLE 10 -#define DMA_A_INTERRUPT_ENABLE 9 -#define EEPROM_DONE_INTERRUPT_ENABLE 8 -#define VBUS_INTERRUPT_ENABLE 7 -#define CONTROL_STATUS_INTERRUPT_ENABLE 6 -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 -#define RESUME_INTERRUPT_ENABLE 1 -#define SOF_INTERRUPT_ENABLE 0 - __le32 cpu_irqenb0; /* ... or onboard 8051 */ -#define SETUP_PACKET_INTERRUPT_ENABLE 7 -#define ENDPOINT_F_INTERRUPT_ENABLE 6 -#define ENDPOINT_E_INTERRUPT_ENABLE 5 -#define ENDPOINT_D_INTERRUPT_ENABLE 4 -#define ENDPOINT_C_INTERRUPT_ENABLE 3 -#define ENDPOINT_B_INTERRUPT_ENABLE 2 -#define ENDPOINT_A_INTERRUPT_ENABLE 1 -#define ENDPOINT_0_INTERRUPT_ENABLE 0 - __le32 cpu_irqenb1; -#define CPU_INTERRUPT_ENABLE 31 -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 -#define PCI_INTA_INTERRUPT_ENABLE 24 -#define PCI_PME_INTERRUPT_ENABLE 23 -#define PCI_SERR_INTERRUPT_ENABLE 22 -#define PCI_PERR_INTERRUPT_ENABLE 21 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 -#define GPIO_INTERRUPT_ENABLE 13 -#define DMA_D_INTERRUPT_ENABLE 12 -#define DMA_C_INTERRUPT_ENABLE 11 -#define DMA_B_INTERRUPT_ENABLE 10 -#define DMA_A_INTERRUPT_ENABLE 9 -#define EEPROM_DONE_INTERRUPT_ENABLE 8 -#define VBUS_INTERRUPT_ENABLE 7 -#define CONTROL_STATUS_INTERRUPT_ENABLE 6 -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 -#define RESUME_INTERRUPT_ENABLE 1 -#define SOF_INTERRUPT_ENABLE 0 - - /* offset 0x0020 */ - u32 _unused1; - __le32 usbirqenb1; -#define USB_INTERRUPT_ENABLE 31 -#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 -#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 -#define PCI_INTA_INTERRUPT_ENABLE 24 -#define PCI_PME_INTERRUPT_ENABLE 23 -#define PCI_SERR_INTERRUPT_ENABLE 22 -#define PCI_PERR_INTERRUPT_ENABLE 21 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 -#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 -#define GPIO_INTERRUPT_ENABLE 13 -#define DMA_D_INTERRUPT_ENABLE 12 -#define DMA_C_INTERRUPT_ENABLE 11 -#define DMA_B_INTERRUPT_ENABLE 10 -#define DMA_A_INTERRUPT_ENABLE 9 -#define EEPROM_DONE_INTERRUPT_ENABLE 8 -#define VBUS_INTERRUPT_ENABLE 7 -#define CONTROL_STATUS_INTERRUPT_ENABLE 6 -#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 -#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 -#define RESUME_INTERRUPT_ENABLE 1 -#define SOF_INTERRUPT_ENABLE 0 - __le32 irqstat0; -#define INTA_ASSERTED 12 -#define SETUP_PACKET_INTERRUPT 7 -#define ENDPOINT_F_INTERRUPT 6 -#define ENDPOINT_E_INTERRUPT 5 -#define ENDPOINT_D_INTERRUPT 4 -#define ENDPOINT_C_INTERRUPT 3 -#define ENDPOINT_B_INTERRUPT 2 -#define ENDPOINT_A_INTERRUPT 1 -#define ENDPOINT_0_INTERRUPT 0 - __le32 irqstat1; -#define POWER_STATE_CHANGE_INTERRUPT 27 -#define PCI_ARBITER_TIMEOUT_INTERRUPT 26 -#define PCI_PARITY_ERROR_INTERRUPT 25 -#define PCI_INTA_INTERRUPT 24 -#define PCI_PME_INTERRUPT 23 -#define PCI_SERR_INTERRUPT 22 -#define PCI_PERR_INTERRUPT 21 -#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20 -#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19 -#define PCI_RETRY_ABORT_INTERRUPT 17 -#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16 -#define GPIO_INTERRUPT 13 -#define DMA_D_INTERRUPT 12 -#define DMA_C_INTERRUPT 11 -#define DMA_B_INTERRUPT 10 -#define DMA_A_INTERRUPT 9 -#define EEPROM_DONE_INTERRUPT 8 -#define VBUS_INTERRUPT 7 -#define CONTROL_STATUS_INTERRUPT 6 -#define ROOT_PORT_RESET_INTERRUPT 4 -#define SUSPEND_REQUEST_INTERRUPT 3 -#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2 -#define RESUME_INTERRUPT 1 -#define SOF_INTERRUPT 0 - /* offset 0x0030 */ - __le32 idxaddr; - __le32 idxdata; - __le32 fifoctl; -#define PCI_BASE2_RANGE 16 -#define IGNORE_FIFO_AVAILABILITY 3 -#define PCI_BASE2_SELECT 2 -#define FIFO_CONFIGURATION_SELECT 0 - u32 _unused2; - /* offset 0x0040 */ - __le32 memaddr; -#define START 28 -#define DIRECTION 27 -#define FIFO_DIAGNOSTIC_SELECT 24 -#define MEMORY_ADDRESS 0 - __le32 memdata0; - __le32 memdata1; - u32 _unused3; - /* offset 0x0050 */ - __le32 gpioctl; -#define GPIO3_LED_SELECT 12 -#define GPIO3_INTERRUPT_ENABLE 11 -#define GPIO2_INTERRUPT_ENABLE 10 -#define GPIO1_INTERRUPT_ENABLE 9 -#define GPIO0_INTERRUPT_ENABLE 8 -#define GPIO3_OUTPUT_ENABLE 7 -#define GPIO2_OUTPUT_ENABLE 6 -#define GPIO1_OUTPUT_ENABLE 5 -#define GPIO0_OUTPUT_ENABLE 4 -#define GPIO3_DATA 3 -#define GPIO2_DATA 2 -#define GPIO1_DATA 1 -#define GPIO0_DATA 0 - __le32 gpiostat; -#define GPIO3_INTERRUPT 3 -#define GPIO2_INTERRUPT 2 -#define GPIO1_INTERRUPT 1 -#define GPIO0_INTERRUPT 0 -} __packed; - -/* usb control, BAR0 + 0x0080 */ -struct net2280_usb_regs { - /* offset 0x0080 */ - __le32 stdrsp; -#define STALL_UNSUPPORTED_REQUESTS 31 -#define SET_TEST_MODE 16 -#define GET_OTHER_SPEED_CONFIGURATION 15 -#define GET_DEVICE_QUALIFIER 14 -#define SET_ADDRESS 13 -#define ENDPOINT_SET_CLEAR_HALT 12 -#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11 -#define GET_STRING_DESCRIPTOR_2 10 -#define GET_STRING_DESCRIPTOR_1 9 -#define GET_STRING_DESCRIPTOR_0 8 -#define GET_SET_INTERFACE 6 -#define GET_SET_CONFIGURATION 5 -#define GET_CONFIGURATION_DESCRIPTOR 4 -#define GET_DEVICE_DESCRIPTOR 3 -#define GET_ENDPOINT_STATUS 2 -#define GET_INTERFACE_STATUS 1 -#define GET_DEVICE_STATUS 0 - __le32 prodvendid; -#define PRODUCT_ID 16 -#define VENDOR_ID 0 - __le32 relnum; - __le32 usbctl; -#define SERIAL_NUMBER_INDEX 16 -#define PRODUCT_ID_STRING_ENABLE 13 -#define VENDOR_ID_STRING_ENABLE 12 -#define USB_ROOT_PORT_WAKEUP_ENABLE 11 -#define VBUS_PIN 10 -#define TIMED_DISCONNECT 9 -#define SUSPEND_IMMEDIATELY 7 -#define SELF_POWERED_USB_DEVICE 6 -#define REMOTE_WAKEUP_SUPPORT 5 -#define PME_POLARITY 4 -#define USB_DETECT_ENABLE 3 -#define PME_WAKEUP_ENABLE 2 -#define DEVICE_REMOTE_WAKEUP_ENABLE 1 -#define SELF_POWERED_STATUS 0 - /* offset 0x0090 */ - __le32 usbstat; -#define HIGH_SPEED 7 -#define FULL_SPEED 6 -#define GENERATE_RESUME 5 -#define GENERATE_DEVICE_REMOTE_WAKEUP 4 - __le32 xcvrdiag; -#define FORCE_HIGH_SPEED_MODE 31 -#define FORCE_FULL_SPEED_MODE 30 -#define USB_TEST_MODE 24 -#define LINE_STATE 16 -#define TRANSCEIVER_OPERATION_MODE 2 -#define TRANSCEIVER_SELECT 1 -#define TERMINATION_SELECT 0 - __le32 setup0123; - __le32 setup4567; - /* offset 0x0090 */ - u32 _unused0; - __le32 ouraddr; -#define FORCE_IMMEDIATE 7 -#define OUR_USB_ADDRESS 0 - __le32 ourconfig; -} __packed; - -/* pci control, BAR0 + 0x0100 */ -struct net2280_pci_regs { - /* offset 0x0100 */ - __le32 pcimstctl; -#define PCI_ARBITER_PARK_SELECT 13 -#define PCI_MULTI LEVEL_ARBITER 12 -#define PCI_RETRY_ABORT_ENABLE 11 -#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10 -#define DMA_READ_MULTIPLE_ENABLE 9 -#define DMA_READ_LINE_ENABLE 8 -#define PCI_MASTER_COMMAND_SELECT 6 -#define MEM_READ_OR_WRITE 0 -#define IO_READ_OR_WRITE 1 -#define CFG_READ_OR_WRITE 2 -#define PCI_MASTER_START 5 -#define PCI_MASTER_READ_WRITE 4 -#define PCI_MASTER_WRITE 0 -#define PCI_MASTER_READ 1 -#define PCI_MASTER_BYTE_WRITE_ENABLES 0 - __le32 pcimstaddr; - __le32 pcimstdata; - __le32 pcimststat; -#define PCI_ARBITER_CLEAR 2 -#define PCI_EXTERNAL_ARBITER 1 -#define PCI_HOST_MODE 0 -} __packed; - -/* dma control, BAR0 + 0x0180 ... array of four structs like this, - * for channels 0..3. see also struct net2280_dma: descriptor - * that can be loaded into some of these registers. - */ -struct net2280_dma_regs { /* [11.7] */ - /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */ - __le32 dmactl; -#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25 -#define DMA_CLEAR_COUNT_ENABLE 21 -#define DESCRIPTOR_POLLING_RATE 19 -#define POLL_CONTINUOUS 0 -#define POLL_1_USEC 1 -#define POLL_100_USEC 2 -#define POLL_1_MSEC 3 -#define DMA_VALID_BIT_POLLING_ENABLE 18 -#define DMA_VALID_BIT_ENABLE 17 -#define DMA_SCATTER_GATHER_ENABLE 16 -#define DMA_OUT_AUTO_START_ENABLE 4 -#define DMA_PREEMPT_ENABLE 3 -#define DMA_FIFO_VALIDATE 2 -#define DMA_ENABLE 1 -#define DMA_ADDRESS_HOLD 0 - __le32 dmastat; -#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25 -#define DMA_TRANSACTION_DONE_INTERRUPT 24 -#define DMA_ABORT 1 -#define DMA_START 0 - u32 _unused0[2]; - /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */ - __le32 dmacount; -#define VALID_BIT 31 -#define DMA_DIRECTION 30 -#define DMA_DONE_INTERRUPT_ENABLE 29 -#define END_OF_CHAIN 28 -#define DMA_BYTE_COUNT_MASK ((1<<24)-1) -#define DMA_BYTE_COUNT 0 - __le32 dmaaddr; - __le32 dmadesc; - u32 _unused1; -} __packed; - -/* dedicated endpoint registers, BAR0 + 0x0200 */ - -struct net2280_dep_regs { /* [11.8] */ - /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */ - __le32 dep_cfg; - /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */ - __le32 dep_rsp; - u32 _unused[2]; -} __packed; - -/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs - * like this, for ep0 then the configurable endpoints A..F - * ep0 reserved for control; E and F have only 64 bytes of fifo - */ -struct net2280_ep_regs { /* [11.9] */ - /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */ - __le32 ep_cfg; -#define ENDPOINT_BYTE_COUNT 16 -#define ENDPOINT_ENABLE 10 -#define ENDPOINT_TYPE 8 -#define ENDPOINT_DIRECTION 7 -#define ENDPOINT_NUMBER 0 - __le32 ep_rsp; -#define SET_NAK_OUT_PACKETS 15 -#define SET_EP_HIDE_STATUS_PHASE 14 -#define SET_EP_FORCE_CRC_ERROR 13 -#define SET_INTERRUPT_MODE 12 -#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11 -#define SET_NAK_OUT_PACKETS_MODE 10 -#define SET_ENDPOINT_TOGGLE 9 -#define SET_ENDPOINT_HALT 8 -#define CLEAR_NAK_OUT_PACKETS 7 -#define CLEAR_EP_HIDE_STATUS_PHASE 6 -#define CLEAR_EP_FORCE_CRC_ERROR 5 -#define CLEAR_INTERRUPT_MODE 4 -#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3 -#define CLEAR_NAK_OUT_PACKETS_MODE 2 -#define CLEAR_ENDPOINT_TOGGLE 1 -#define CLEAR_ENDPOINT_HALT 0 - __le32 ep_irqenb; -#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6 -#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5 -#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3 -#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2 -#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1 -#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0 - __le32 ep_stat; -#define FIFO_VALID_COUNT 24 -#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22 -#define TIMEOUT 21 -#define USB_STALL_SENT 20 -#define USB_IN_NAK_SENT 19 -#define USB_IN_ACK_RCVD 18 -#define USB_OUT_PING_NAK_SENT 17 -#define USB_OUT_ACK_SENT 16 -#define FIFO_OVERFLOW 13 -#define FIFO_UNDERFLOW 12 -#define FIFO_FULL 11 -#define FIFO_EMPTY 10 -#define FIFO_FLUSH 9 -#define SHORT_PACKET_OUT_DONE_INTERRUPT 6 -#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5 -#define NAK_OUT_PACKETS 4 -#define DATA_PACKET_RECEIVED_INTERRUPT 3 -#define DATA_PACKET_TRANSMITTED_INTERRUPT 2 -#define DATA_OUT_PING_TOKEN_INTERRUPT 1 -#define DATA_IN_TOKEN_INTERRUPT 0 - /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */ - __le32 ep_avail; - __le32 ep_data; - u32 _unused0[2]; -} __packed; - -struct net2280_reg_write { - __le16 port; - __le32 addr; - __le32 val; -} __packed; - -struct net2280_reg_read { - __le16 port; - __le32 addr; -} __packed; -#endif /* NET2280_H */ diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h index d273be7272b9..a5f5f0fea3bd 100644 --- a/drivers/net/wireless/p54/p54usb.h +++ b/drivers/net/wireless/p54/p54usb.h @@ -16,7 +16,7 @@ /* for isl3886 register definitions used on ver 1 devices */ #include "p54pci.h" -#include "net2280.h" +#include <linux/usb/net2280.h> /* pci */ #define NET2280_BASE 0x10000000 @@ -93,6 +93,17 @@ enum net2280_op_type { NET2280_DEV_CFG_U16 = 0x0883 }; +struct net2280_reg_write { + __le16 port; + __le32 addr; + __le32 val; +} __packed; + +struct net2280_reg_read { + __le16 port; + __le32 addr; +} __packed; + #define P54U_FW_BLOCK 2048 #define X2_SIGNATURE "x2 " |