diff options
| -rw-r--r-- | drivers/mmc/host/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 36 |
2 files changed, 35 insertions, 7 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index c226d549fd2f..87d5067ba629 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -130,13 +130,13 @@ config MMC_SDHCI_CNS3XXX If unsure, say N. config MMC_SDHCI_ESDHC_IMX - tristate "SDHCI platform support for the Freescale eSDHC i.MX controller" + tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller" depends on ARCH_MXC depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS help - This selects the Freescale eSDHC controller support on the platform - bus, found on i.MX25, i.MX35 and i.MX5x. + This selects the Freescale eSDHC/uSDHC controller support + found on i.MX25, i.MX35 i.MX5x and i.MX6x. If you have a controller with this interface, say Y or M here. diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4557aa1567a5..ae57769ba50d 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -32,6 +32,7 @@ /* VENDOR SPEC register */ #define SDHCI_VENDOR_SPEC 0xC0 #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 +#define SDHCI_MIX_CTRL 0x48 /* * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC: @@ -59,6 +60,7 @@ enum imx_esdhc_type { IMX35_ESDHC, IMX51_ESDHC, IMX53_ESDHC, + IMX6Q_USDHC, }; struct pltfm_imx_data { @@ -82,6 +84,9 @@ static struct platform_device_id imx_esdhc_devtype[] = { .name = "sdhci-esdhc-imx53", .driver_data = IMX53_ESDHC, }, { + .name = "sdhci-usdhc-imx6q", + .driver_data = IMX6Q_USDHC, + }, { /* sentinel */ } }; @@ -92,6 +97,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], }, { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], }, { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], }, + { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); @@ -116,6 +122,11 @@ static inline int is_imx53_esdhc(struct pltfm_imx_data *data) return data->devtype == IMX53_ESDHC; } +static inline int is_imx6q_usdhc(struct pltfm_imx_data *data) +{ + return data->devtype == IMX6Q_USDHC; +} + static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~0x3); @@ -220,8 +231,16 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) static u16 esdhc_readw_le(struct sdhci_host *host, int reg) { - if (unlikely(reg == SDHCI_HOST_VERSION)) - reg ^= 2; + if (unlikely(reg == SDHCI_HOST_VERSION)) { + u16 val = readw(host->ioaddr + (reg ^ 2)); + /* + * uSDHC supports SDHCI v3.0, but it's encoded as value + * 0x3 in host controller version register, which violates + * SDHCI_SPEC_300 definition. Work it around here. + */ + if ((val & SDHCI_SPEC_VER_MASK) == 3) + return --val; + } return readw(host->ioaddr + reg); } @@ -252,8 +271,17 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; - writel(val << 16 | imx_data->scratchpad, - host->ioaddr + SDHCI_TRANSFER_MODE); + + if (is_imx6q_usdhc(imx_data)) { + u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL); + m = imx_data->scratchpad | (m & 0xffff0000); + writel(m, host->ioaddr + SDHCI_MIX_CTRL); + writel(val << 16, + host->ioaddr + SDHCI_TRANSFER_MODE); + } else { + writel(val << 16 | imx_data->scratchpad, + host->ioaddr + SDHCI_TRANSFER_MODE); + } return; case SDHCI_BLOCK_SIZE: val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); |