diff options
| -rw-r--r-- | drivers/hwmon/it87.c | 162 |
1 files changed, 124 insertions, 38 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index aebac1334ff6..bef8732f08b1 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -234,6 +234,7 @@ struct it87_sio_data { u8 beep_pin; u8 internal; /* Internal sensors can be labeled */ /* Features skipped based on config or DMI */ + u16 skip_in; u8 skip_vid; u8 skip_fan; u8 skip_pwm; @@ -1371,41 +1372,73 @@ static ssize_t show_name(struct device *dev, struct device_attribute } static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -static struct attribute *it87_attributes[] = { +static struct attribute *it87_attributes_in[9][5] = { +{ &sensor_dev_attr_in0_input.dev_attr.attr, - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in3_input.dev_attr.attr, - &sensor_dev_attr_in4_input.dev_attr.attr, - &sensor_dev_attr_in5_input.dev_attr.attr, - &sensor_dev_attr_in6_input.dev_attr.attr, - &sensor_dev_attr_in7_input.dev_attr.attr, - &sensor_dev_attr_in8_input.dev_attr.attr, &sensor_dev_attr_in0_min.dev_attr.attr, - &sensor_dev_attr_in1_min.dev_attr.attr, - &sensor_dev_attr_in2_min.dev_attr.attr, - &sensor_dev_attr_in3_min.dev_attr.attr, - &sensor_dev_attr_in4_min.dev_attr.attr, - &sensor_dev_attr_in5_min.dev_attr.attr, - &sensor_dev_attr_in6_min.dev_attr.attr, - &sensor_dev_attr_in7_min.dev_attr.attr, &sensor_dev_attr_in0_max.dev_attr.attr, - &sensor_dev_attr_in1_max.dev_attr.attr, - &sensor_dev_attr_in2_max.dev_attr.attr, - &sensor_dev_attr_in3_max.dev_attr.attr, - &sensor_dev_attr_in4_max.dev_attr.attr, - &sensor_dev_attr_in5_max.dev_attr.attr, - &sensor_dev_attr_in6_max.dev_attr.attr, - &sensor_dev_attr_in7_max.dev_attr.attr, &sensor_dev_attr_in0_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, &sensor_dev_attr_in1_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, &sensor_dev_attr_in2_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, &sensor_dev_attr_in3_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, &sensor_dev_attr_in4_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, &sensor_dev_attr_in5_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, &sensor_dev_attr_in6_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, &sensor_dev_attr_in7_alarm.dev_attr.attr, + NULL +}, { + &sensor_dev_attr_in8_input.dev_attr.attr, + NULL +} }; + +static const struct attribute_group it87_group_in[9] = { + { .attrs = it87_attributes_in[0] }, + { .attrs = it87_attributes_in[1] }, + { .attrs = it87_attributes_in[2] }, + { .attrs = it87_attributes_in[3] }, + { .attrs = it87_attributes_in[4] }, + { .attrs = it87_attributes_in[5] }, + { .attrs = it87_attributes_in[6] }, + { .attrs = it87_attributes_in[7] }, + { .attrs = it87_attributes_in[8] }, +}; +static struct attribute *it87_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, @@ -1432,7 +1465,7 @@ static const struct attribute_group it87_group = { .attrs = it87_attributes, }; -static struct attribute *it87_attributes_beep[] = { +static struct attribute *it87_attributes_in_beep[] = { &sensor_dev_attr_in0_beep.dev_attr.attr, &sensor_dev_attr_in1_beep.dev_attr.attr, &sensor_dev_attr_in2_beep.dev_attr.attr, @@ -1441,7 +1474,10 @@ static struct attribute *it87_attributes_beep[] = { &sensor_dev_attr_in5_beep.dev_attr.attr, &sensor_dev_attr_in6_beep.dev_attr.attr, &sensor_dev_attr_in7_beep.dev_attr.attr, + NULL +}; +static struct attribute *it87_attributes_beep[] = { &sensor_dev_attr_temp1_beep.dev_attr.attr, &sensor_dev_attr_temp2_beep.dev_attr.attr, &sensor_dev_attr_temp3_beep.dev_attr.attr, @@ -1696,7 +1732,6 @@ static int __init it87_find(unsigned short *address, sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f; } else if (sio_data->type == it8783) { int reg25, reg27, reg2A, reg2C, regEF; - bool uart6; sio_data->skip_vid = 1; /* No VID */ @@ -1708,10 +1743,8 @@ static int __init it87_find(unsigned short *address, reg2C = superio_inb(IT87_SIO_PINX2_REG); regEF = superio_inb(IT87_SIO_SPI_REG); - uart6 = reg2C & (1 << 2); - /* Check if fan3 is there or not */ - if ((reg27 & (1 << 0)) || !uart6) + if ((reg27 & (1 << 0)) || !(reg2C & (1 << 2))) sio_data->skip_fan |= (1 << 2); if ((reg25 & (1 << 4)) || (!(reg2A & (1 << 1)) && (regEF & (1 << 0)))) @@ -1724,19 +1757,39 @@ static int __init it87_find(unsigned short *address, sio_data->skip_pwm |= (1 << 1); /* VIN5 */ - if ((reg27 & (1 << 0)) || uart6) - ; /* No VIN5 */ + if ((reg27 & (1 << 0)) || (reg2C & (1 << 2))) + sio_data->skip_in |= (1 << 5); /* No VIN5 */ /* VIN6 */ - if ((reg27 & (1 << 1)) || uart6) - ; /* No VIN6 */ + if (reg27 & (1 << 1)) + sio_data->skip_in |= (1 << 6); /* No VIN6 */ /* * VIN7 * Does not depend on bit 2 of Reg2C, contrary to datasheet. */ - if (reg27 & (1 << 2)) - ; /* No VIN7 (unless internal) */ + if (reg27 & (1 << 2)) { + /* + * The data sheet is a bit unclear regarding the + * internal voltage divider for VCCH5V. It says + * "This bit enables and switches VIN7 (pin 91) to the + * internal voltage divider for VCCH5V". + * This is different to other chips, where the internal + * voltage divider would connect VIN7 to an internal + * voltage source. Maybe that is the case here as well. + * + * Since we don't know for sure, re-route it if that is + * not the case, and ask the user to report if the + * resulting voltage is sane. + */ + if (!(reg2C & (1 << 1))) { + reg2C |= (1 << 1); + superio_outb(IT87_SIO_PINX2_REG, reg2C); + pr_notice("Routing internal VCCH5V to in7.\n"); + } + pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n"); + pr_notice("Please report if it displays a reasonable voltage.\n"); + } if (reg2C & (1 << 0)) sio_data->internal |= (1 << 0); @@ -1747,6 +1800,7 @@ static int __init it87_find(unsigned short *address, } else { int reg; + bool uart6; superio_select(GPIO); @@ -1784,6 +1838,9 @@ static int __init it87_find(unsigned short *address, sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); + + uart6 = sio_data->type == it8782 && (reg & (1 << 2)); + /* * The IT8720F has no VIN7 pin, so VCCH should always be * routed internally to VIN7 with an internal divider. @@ -1795,11 +1852,10 @@ static int __init it87_find(unsigned short *address, * setting. So we force the internal routing in this case. * * On IT8782F, VIN7 is multiplexed with one of the UART6 pins. - * If UART6 is enabled, re-route VIN7 to the internal divider. + * If UART6 is enabled, re-route VIN7 to the internal divider + * if that is not already the case. */ - if ((sio_data->type == it8720 || - (sio_data->type == it8782 && (reg & (1 << 2)))) - && !(reg & (1 << 1))) { + if ((sio_data->type == it8720 || uart6) && !(reg & (1 << 1))) { reg |= (1 << 1); superio_outb(IT87_SIO_PINX2_REG, reg); pr_notice("Routing internal VCCH to in7\n"); @@ -1810,6 +1866,14 @@ static int __init it87_find(unsigned short *address, sio_data->type == it8728) sio_data->internal |= (1 << 1); + /* + * On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7. + * While VIN7 can be routed to the internal voltage divider, + * VIN5 and VIN6 are not available if UART6 is enabled. + */ + if (uart6) + sio_data->skip_in |= (1 << 5) | (1 << 6); + sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f; } if (sio_data->beep_pin) @@ -1847,6 +1911,14 @@ static void it87_remove_files(struct device *dev) int i; sysfs_remove_group(&dev->kobj, &it87_group); + for (i = 0; i < 9; i++) { + if (sio_data->skip_in & (1 << i)) + continue; + sysfs_remove_group(&dev->kobj, &it87_group_in[i]); + if (it87_attributes_in_beep[i]) + sysfs_remove_file(&dev->kobj, + it87_attributes_in_beep[i]); + } if (sio_data->beep_pin) sysfs_remove_group(&dev->kobj, &it87_group_beep); for (i = 0; i < 5; i++) { @@ -1949,6 +2021,20 @@ static int __devinit it87_probe(struct platform_device *pdev) if (err) goto ERROR2; + for (i = 0; i < 9; i++) { + if (sio_data->skip_in & (1 << i)) + continue; + err = sysfs_create_group(&dev->kobj, &it87_group_in[i]); + if (err) + goto ERROR4; + if (sio_data->beep_pin && it87_attributes_in_beep[i]) { + err = sysfs_create_file(&dev->kobj, + it87_attributes_in_beep[i]); + if (err) + goto ERROR4; + } + } + if (sio_data->beep_pin) { err = sysfs_create_group(&dev->kobj, &it87_group_beep); if (err) |