summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe-phy.txt16
-rw-r--r--drivers/net/phy/amd-xgbe-phy.c159
2 files changed, 152 insertions, 23 deletions
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
index d54fe1af0325..33df3932168e 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
@@ -16,6 +16,18 @@ Optional properties:
0 - 1GbE and 10GbE (default)
1 - 2.5GbE and 10GbE
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed. All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+ 0 - Off
+ 1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+
Example:
xgbe_phy@e1240800 {
compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
@@ -25,4 +37,8 @@ Example:
interrupt-parent = <&gic>;
interrupts = <0 323 4>;
amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <30>;
+ amd,serdes-tx-amp = <15>, <15>, <10>;
};
diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c
index 2f2107436738..9e3af54c9010 100644
--- a/drivers/net/phy/amd-xgbe-phy.c
+++ b/drivers/net/phy/amd-xgbe-phy.c
@@ -88,6 +88,15 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#define XGBE_PHY_MASK 0xfffffff0
#define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set"
+#define XGBE_PHY_BLWC_PROPERTY "amd,serdes-blwc"
+#define XGBE_PHY_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
+#define XGBE_PHY_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
+#define XGBE_PHY_TX_AMP_PROPERTY "amd,serdes-tx-amp"
+
+#define XGBE_PHY_SPEEDS 3
+#define XGBE_PHY_SPEED_1000 0
+#define XGBE_PHY_SPEED_2500 1
+#define XGBE_PHY_SPEED_10000 2
#define XGBE_AN_INT_CMPLT 0x01
#define XGBE_AN_INC_LINK 0x02
@@ -152,10 +161,10 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#define SIR0_STATUS_RX_READY_WIDTH 1
#define SIR0_STATUS_TX_READY_INDEX 8
#define SIR0_STATUS_TX_READY_WIDTH 1
+#define SIR1_SPEED_CDR_RATE_INDEX 12
+#define SIR1_SPEED_CDR_RATE_WIDTH 4
#define SIR1_SPEED_DATARATE_INDEX 4
#define SIR1_SPEED_DATARATE_WIDTH 2
-#define SIR1_SPEED_PI_SPD_SEL_INDEX 12
-#define SIR1_SPEED_PI_SPD_SEL_WIDTH 4
#define SIR1_SPEED_PLLSEL_INDEX 3
#define SIR1_SPEED_PLLSEL_WIDTH 1
#define SIR1_SPEED_RATECHANGE_INDEX 6
@@ -165,20 +174,26 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#define SIR1_SPEED_WORDMODE_INDEX 0
#define SIR1_SPEED_WORDMODE_WIDTH 3
+#define SPEED_10000_BLWC 0
#define SPEED_10000_CDR 0x7
#define SPEED_10000_PLL 0x1
+#define SPEED_10000_PQ 0x1e
#define SPEED_10000_RATE 0x0
#define SPEED_10000_TXAMP 0xa
#define SPEED_10000_WORD 0x7
+#define SPEED_2500_BLWC 1
#define SPEED_2500_CDR 0x2
#define SPEED_2500_PLL 0x0
+#define SPEED_2500_PQ 0xa
#define SPEED_2500_RATE 0x1
#define SPEED_2500_TXAMP 0xf
#define SPEED_2500_WORD 0x1
+#define SPEED_1000_BLWC 1
#define SPEED_1000_CDR 0x2
#define SPEED_1000_PLL 0x0
+#define SPEED_1000_PQ 0xa
#define SPEED_1000_RATE 0x3
#define SPEED_1000_TXAMP 0xf
#define SPEED_1000_WORD 0x1
@@ -193,15 +208,6 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#define RXTX_REG114_PQ_REG_INDEX 9
#define RXTX_REG114_PQ_REG_WIDTH 7
-#define RXTX_10000_BLWC 0
-#define RXTX_10000_PQ 0x1e
-
-#define RXTX_2500_BLWC 1
-#define RXTX_2500_PQ 0xa
-
-#define RXTX_1000_BLWC 1
-#define RXTX_1000_PQ 0xa
-
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
@@ -303,6 +309,30 @@ do { \
XRXTX_IOWRITE((_priv), _reg, reg_val); \
} while (0)
+static const u32 amd_xgbe_phy_serdes_blwc[] = {
+ SPEED_1000_BLWC,
+ SPEED_2500_BLWC,
+ SPEED_10000_BLWC,
+};
+
+static const u32 amd_xgbe_phy_serdes_cdr_rate[] = {
+ SPEED_1000_CDR,
+ SPEED_2500_CDR,
+ SPEED_10000_CDR,
+};
+
+static const u32 amd_xgbe_phy_serdes_pq_skew[] = {
+ SPEED_1000_PQ,
+ SPEED_2500_PQ,
+ SPEED_10000_PQ,
+};
+
+static const u32 amd_xgbe_phy_serdes_tx_amp[] = {
+ SPEED_1000_TXAMP,
+ SPEED_2500_TXAMP,
+ SPEED_10000_TXAMP,
+};
+
enum amd_xgbe_phy_an {
AMD_XGBE_AN_READY = 0,
AMD_XGBE_AN_PAGE_RECEIVED,
@@ -353,6 +383,17 @@ struct amd_xgbe_phy_priv {
unsigned int speed_set;
+ /* SerDes UEFI configurable settings.
+ * Switching between modes/speeds requires new values for some
+ * SerDes settings. The values can be supplied as device
+ * properties in array format. The first array entry is for
+ * 1GbE, second for 2.5GbE and third for 10GbE
+ */
+ u32 serdes_blwc[XGBE_PHY_SPEEDS];
+ u32 serdes_cdr_rate[XGBE_PHY_SPEEDS];
+ u32 serdes_pq_skew[XGBE_PHY_SPEEDS];
+ u32 serdes_tx_amp[XGBE_PHY_SPEEDS];
+
/* Auto-negotiation state machine support */
struct mutex an_mutex;
enum amd_xgbe_phy_an an_result;
@@ -483,12 +524,16 @@ static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE);
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD);
- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_10000_TXAMP);
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL);
- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_10000_CDR);
- XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_10000_BLWC);
- XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_10000_PQ);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,
+ priv->serdes_cdr_rate[XGBE_PHY_SPEED_10000]);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,
+ priv->serdes_tx_amp[XGBE_PHY_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
+ priv->serdes_blwc[XGBE_PHY_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
+ priv->serdes_pq_skew[XGBE_PHY_SPEED_10000]);
amd_xgbe_phy_serdes_complete_ratechange(phydev);
@@ -531,12 +576,16 @@ static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev)
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE);
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD);
- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_2500_TXAMP);
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL);
- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_2500_CDR);
- XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_2500_BLWC);
- XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_2500_PQ);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,
+ priv->serdes_cdr_rate[XGBE_PHY_SPEED_2500]);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,
+ priv->serdes_tx_amp[XGBE_PHY_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
+ priv->serdes_blwc[XGBE_PHY_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
+ priv->serdes_pq_skew[XGBE_PHY_SPEED_2500]);
amd_xgbe_phy_serdes_complete_ratechange(phydev);
@@ -579,12 +628,16 @@ static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev)
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE);
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD);
- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, SPEED_1000_TXAMP);
XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL);
- XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PI_SPD_SEL, SPEED_1000_CDR);
- XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, RXTX_1000_BLWC);
- XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, RXTX_1000_PQ);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,
+ priv->serdes_cdr_rate[XGBE_PHY_SPEED_1000]);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,
+ priv->serdes_tx_amp[XGBE_PHY_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
+ priv->serdes_blwc[XGBE_PHY_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
+ priv->serdes_pq_skew[XGBE_PHY_SPEED_1000]);
amd_xgbe_phy_serdes_complete_ratechange(phydev);
@@ -1555,6 +1608,66 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
goto err_sir1;
}
+ if (device_property_present(phy_dev, XGBE_PHY_BLWC_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_BLWC_PROPERTY,
+ priv->serdes_blwc,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_BLWC_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_blwc, amd_xgbe_phy_serdes_blwc,
+ sizeof(priv->serdes_blwc));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_CDR_RATE_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_CDR_RATE_PROPERTY,
+ priv->serdes_cdr_rate,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_CDR_RATE_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_cdr_rate, amd_xgbe_phy_serdes_cdr_rate,
+ sizeof(priv->serdes_cdr_rate));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_PQ_SKEW_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_PQ_SKEW_PROPERTY,
+ priv->serdes_pq_skew,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_PQ_SKEW_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_pq_skew, amd_xgbe_phy_serdes_pq_skew,
+ sizeof(priv->serdes_pq_skew));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_TX_AMP_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_TX_AMP_PROPERTY,
+ priv->serdes_tx_amp,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_TX_AMP_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_tx_amp, amd_xgbe_phy_serdes_tx_amp,
+ sizeof(priv->serdes_tx_amp));
+ }
+
phydev->priv = priv;
if (!priv->adev || acpi_disabled)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 17:55:17 +0000