diff options
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 327 |
1 files changed, 227 insertions, 100 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index f017c92c731f..f5d3650659ec 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -32,6 +32,7 @@ #include <linux/debugfs.h> #include <linux/vmalloc.h> #include <linux/platform_data/brcmfmac-sdio.h> +#include <linux/moduleparam.h> #include <asm/unaligned.h> #include <defs.h> #include <brcmu_wifi.h> @@ -110,6 +111,8 @@ struct rte_console { #define BRCMF_TXBOUND 20 /* Default for max tx frames in one scheduling */ +#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ + #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ #define MEMBLOCK 2048 /* Block size used for downloading @@ -360,6 +363,8 @@ struct brcmf_sdio_hdrinfo { u16 len_left; u16 len_nxtfrm; u8 dat_offset; + bool lastfrm; + u16 tail_pad; }; /* misc chip info needed by some of the routines */ @@ -455,6 +460,8 @@ struct brcmf_sdio { bool sleeping; /* SDIO bus sleeping */ u8 tx_hdrlen; /* sdio bus header length for tx packet */ + bool txglom; /* host tx glomming enable flag */ + struct sk_buff *txglom_sgpad; /* scatter-gather padding buffer */ }; /* clkstate */ @@ -479,6 +486,10 @@ static const uint max_roundup = 512; #define ALIGNMENT 4 +static int brcmf_sdio_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; +module_param_named(txglomsz, brcmf_sdio_txglomsz, int, 0); +MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]"); + enum brcmf_sdio_frmtype { BRCMF_SDIO_FT_NORMAL, BRCMF_SDIO_FT_SUPER, @@ -1102,10 +1113,18 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) * host and WiFi dongle which contains information needed for SDIO core and * firmware * - * It consists of 2 parts: hw header and software header + * It consists of 3 parts: hardware header, hardware extension header and + * software header * hardware header (frame tag) - 4 bytes * Byte 0~1: Frame length * Byte 2~3: Checksum, bit-wise inverse of frame length + * hardware extension header - 8 bytes + * Tx glom mode only, N/A for Rx or normal Tx + * Byte 0~1: Packet length excluding hw frame tag + * Byte 2: Reserved + * Byte 3: Frame flags, bit 0: last frame indication + * Byte 4~5: Reserved + * Byte 6~7: Tail padding length * software header - 8 bytes * Byte 0: Rx/Tx sequence number * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag @@ -1116,6 +1135,7 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus) * Byte 6~7: Reserved */ #define SDPCM_HWHDR_LEN 4 +#define SDPCM_HWEXT_LEN 8 #define SDPCM_SWHDR_LEN 8 #define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) /* software header */ @@ -1265,18 +1285,28 @@ static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length) static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header, struct brcmf_sdio_hdrinfo *hd_info) { - u32 sw_header; + u32 hdrval; + u8 hdr_offset; brcmf_sdio_update_hwhdr(header, hd_info->len); - - sw_header = bus->tx_seq; - sw_header |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & - SDPCM_CHANNEL_MASK; - sw_header |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & - SDPCM_DOFFSET_MASK; - *(((__le32 *)header) + 1) = cpu_to_le32(sw_header); - *(((__le32 *)header) + 2) = 0; - trace_brcmf_sdpcm_hdr(SDPCM_TX, header); + hdr_offset = SDPCM_HWHDR_LEN; + + if (bus->txglom) { + hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24); + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + hdrval = (u16)hd_info->tail_pad << 16; + *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval); + hdr_offset += SDPCM_HWEXT_LEN; + } + + hdrval = hd_info->seq_num; + hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & + SDPCM_CHANNEL_MASK; + hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & + SDPCM_DOFFSET_MASK; + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + *(((__le32 *)(header + hdr_offset)) + 1) = 0; + trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header); } static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) @@ -1876,6 +1906,34 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) return; } +static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt) +{ + u16 head_align, head_pad; + u8 *dat_buf; + + /* SDIO ADMA requires at least 32 bit alignment */ + head_align = 4; + if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align > 4) + head_align = bus->sdiodev->pdata->sd_head_align; + + dat_buf = (u8 *)(pkt->data); + + /* Check head padding */ + head_pad = ((unsigned long)dat_buf % head_align); + if (head_pad) { + if (skb_headroom(pkt) < head_pad) { + bus->sdiodev->bus_if->tx_realloc++; + head_pad = 0; + if (skb_cow(pkt, head_pad)) + return -ENOMEM; + } + skb_push(pkt, head_pad); + dat_buf = (u8 *)(pkt->data); + memset(dat_buf, 0, head_pad + bus->tx_hdrlen); + } + return head_pad; +} + /** * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage. @@ -1885,16 +1943,18 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) /* bit mask of data length chopped from the previous packet */ #define ALIGN_SKB_CHOP_LEN_MASK 0x7fff -static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, +static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, struct sk_buff_head *pktq, - struct sk_buff *pkt, uint chan) + struct sk_buff *pkt, u16 total_len) { + struct brcmf_sdio_dev *sdiodev; struct sk_buff *pkt_pad; - u16 tail_pad, tail_chop, sg_align; + u16 tail_pad, tail_chop, sg_align, chain_pad; unsigned int blksize; - u8 *dat_buf; - int ntail; + bool lastfrm; + int ntail, ret; + sdiodev = bus->sdiodev; blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize; sg_align = 4; if (sdiodev->pdata && sdiodev->pdata->sd_sgentry_align > 4) @@ -1903,14 +1963,23 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, WARN_ON(blksize % sg_align); /* Check tail padding */ - pkt_pad = NULL; + lastfrm = skb_queue_is_last(pktq, pkt); + tail_pad = 0; tail_chop = pkt->len % sg_align; - tail_pad = sg_align - tail_chop; - tail_pad += blksize - (pkt->len + tail_pad) % blksize; + if (tail_chop) + tail_pad = sg_align - tail_chop; + chain_pad = (total_len + tail_pad) % blksize; + if (lastfrm && chain_pad) + tail_pad += blksize - chain_pad; if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) { - pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop); + pkt_pad = bus->txglom_sgpad; + if (pkt_pad == NULL) + brcmu_pkt_buf_get_skb(tail_pad + tail_chop); if (pkt_pad == NULL) return -ENOMEM; + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad); + if (unlikely(ret < 0)) + return ret; memcpy(pkt_pad->data, pkt->data + pkt->len - tail_chop, tail_chop); @@ -1925,14 +1994,10 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio_dev *sdiodev, return -ENOMEM; if (skb_linearize(pkt)) return -ENOMEM; - dat_buf = (u8 *)(pkt->data); __skb_put(pkt, tail_pad); } - if (pkt_pad) - return pkt->len + tail_chop; - else - return pkt->len - tail_pad; + return tail_pad; } /** @@ -1951,58 +2016,66 @@ static int brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { - u16 head_pad, head_align; + u16 head_pad, total_len; struct sk_buff *pkt_next; - u8 *dat_buf; - int err; + u8 txseq; + int ret; struct brcmf_sdio_hdrinfo hd_info = {0}; - /* SDIO ADMA requires at least 32 bit alignment */ - head_align = 4; - if (bus->sdiodev->pdata && bus->sdiodev->pdata->sd_head_align > 4) - head_align = bus->sdiodev->pdata->sd_head_align; + txseq = bus->tx_seq; + total_len = 0; + skb_queue_walk(pktq, pkt_next) { + /* alignment packet inserted in previous + * loop cycle can be skipped as it is + * already properly aligned and does not + * need an sdpcm header. + */ + if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG) + continue; - pkt_next = pktq->next; - dat_buf = (u8 *)(pkt_next->data); + /* align packet data pointer */ + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next); + if (ret < 0) + return ret; + head_pad = (u16)ret; + if (head_pad) + memset(pkt_next->data, 0, head_pad + bus->tx_hdrlen); - /* Check head padding */ - head_pad = ((unsigned long)dat_buf % head_align); - if (head_pad) { - if (skb_headroom(pkt_next) < head_pad) { - bus->sdiodev->bus_if->tx_realloc++; - head_pad = 0; - if (skb_cow(pkt_next, head_pad)) - return -ENOMEM; - } - skb_push(pkt_next, head_pad); - dat_buf = (u8 *)(pkt_next->data); - memset(dat_buf, 0, head_pad + bus->tx_hdrlen); - } + total_len += pkt_next->len; - if (bus->sdiodev->sg_support && pktq->qlen > 1) { - err = brcmf_sdio_txpkt_prep_sg(bus->sdiodev, pktq, - pkt_next, chan); - if (err < 0) - return err; - hd_info.len = (u16)err; - } else { hd_info.len = pkt_next->len; - } - - hd_info.channel = chan; - hd_info.dat_offset = head_pad + bus->tx_hdrlen; - - /* Now fill the header */ - brcmf_sdio_hdpack(bus, dat_buf, &hd_info); - - if (BRCMF_BYTES_ON() && - ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || - (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) - brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, "Tx Frame:\n"); - else if (BRCMF_HDRS_ON()) - brcmf_dbg_hex_dump(true, pkt_next, head_pad + bus->tx_hdrlen, - "Tx Header:\n"); + hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next); + if (bus->txglom && pktq->qlen > 1) { + ret = brcmf_sdio_txpkt_prep_sg(bus, pktq, + pkt_next, total_len); + if (ret < 0) + return ret; + hd_info.tail_pad = (u16)ret; + total_len += (u16)ret; + } + hd_info.channel = chan; + hd_info.dat_offset = head_pad + bus->tx_hdrlen; + hd_info.seq_num = txseq++; + + /* Now fill the header */ + brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info); + + if (BRCMF_BYTES_ON() && + ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || + (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) + brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, + "Tx Frame:\n"); + else if (BRCMF_HDRS_ON()) + brcmf_dbg_hex_dump(true, pkt_next, + head_pad + bus->tx_hdrlen, + "Tx Header:\n"); + } + /* Hardware length tag of the first packet should be total + * length of the chain (including padding) + */ + if (bus->txglom) + brcmf_sdio_update_hwhdr(pktq->next->data, total_len); return 0; } @@ -2020,6 +2093,7 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) { u8 *hdr; u32 dat_offset; + u16 tail_pad; u32 dummy_flags, chop_len; struct sk_buff *pkt_next, *tmp, *pkt_prev; @@ -2029,42 +2103,42 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; if (chop_len) { pkt_prev = pkt_next->prev; - memcpy(pkt_prev->data + pkt_prev->len, - pkt_next->data, chop_len); skb_put(pkt_prev, chop_len); } __skb_unlink(pkt_next, pktq); brcmu_pkt_buf_free_skb(pkt_next); } else { - hdr = pkt_next->data + SDPCM_HWHDR_LEN; + hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN; dat_offset = le32_to_cpu(*(__le32 *)hdr); dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT; skb_pull(pkt_next, dat_offset); + if (bus->txglom) { + tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2)); + skb_trim(pkt_next, pkt_next->len - tail_pad); + } } } } /* Writes a HW/SW header into the packet and sends it. */ /* Assumes: (a) header space already there, (b) caller holds lock */ -static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, +static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { int ret; int i; - struct sk_buff_head localq; + struct sk_buff *pkt_next, *tmp; brcmf_dbg(TRACE, "Enter\n"); - __skb_queue_head_init(&localq); - __skb_queue_tail(&localq, pkt); - ret = brcmf_sdio_txpkt_prep(bus, &localq, chan); + ret = brcmf_sdio_txpkt_prep(bus, pktq, chan); if (ret) goto done; sdio_claim_host(bus->sdiodev->func[1]); ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad, - SDIO_FUNC_2, F2SYNC, &localq); + SDIO_FUNC_2, F2SYNC, pktq); bus->sdcnt.f2txdata++; if (ret < 0) { @@ -2088,42 +2162,56 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt, if ((hi == 0) && (lo == 0)) break; } - } sdio_release_host(bus->sdiodev->func[1]); - if (ret == 0) - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; done: - brcmf_sdio_txpkt_postp(bus, &localq); - __skb_dequeue_tail(&localq); - brcmf_txcomplete(bus->sdiodev->dev, pkt, ret == 0); + brcmf_sdio_txpkt_postp(bus, pktq); + if (ret == 0) + bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP; + skb_queue_walk_safe(pktq, pkt_next, tmp) { + __skb_unlink(pkt_next, pktq); + brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0); + } return ret; } static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; + struct sk_buff_head pktq; u32 intstatus = 0; - int ret = 0, prec_out; + int ret = 0, prec_out, i; uint cnt = 0; - u8 tx_prec_map; + u8 tx_prec_map, pkt_num; brcmf_dbg(TRACE, "Enter\n"); tx_prec_map = ~bus->flowcontrol; /* Send frames until the limit or some other event */ - for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) { + for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { + pkt_num = 1; + __skb_queue_head_init(&pktq); + if (bus->txglom) + pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, + brcmf_sdio_txglomsz); + pkt_num = min_t(u32, pkt_num, + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); spin_lock_bh(&bus->txqlock); - pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out); - if (pkt == NULL) { - spin_unlock_bh(&bus->txqlock); - break; + for (i = 0; i < pkt_num; i++) { + pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, + &prec_out); + if (pkt == NULL) + break; + __skb_queue_tail(&pktq, pkt); } spin_unlock_bh(&bus->txqlock); + if (i == 0) + break; - ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL); + ret = brcmf_sdbrcm_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); + cnt += i; /* In poll mode, need to check for other events */ if (!bus->intr && cnt) { @@ -2670,7 +2758,7 @@ static int brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { u8 *frame; - u16 len; + u16 len, pad; uint retries = 0; u8 doff = 0; int ret = -1; @@ -2697,13 +2785,15 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) doff += bus->tx_hdrlen; /* Round send length to next SDIO block */ + pad = 0; if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { - u16 pad = bus->blocksize - (len % bus->blocksize); - if ((pad <= bus->roundup) && (pad < bus->blocksize)) - len += pad; + pad = bus->blocksize - (len % bus->blocksize); + if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad = 0; } else if (len % BRCMF_SDALIGN) { - len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN); + pad = BRCMF_SDALIGN - (len % BRCMF_SDALIGN); } + len += pad; /* Satisfy length-alignment requirements */ if (len & (ALIGNMENT - 1)) @@ -2719,8 +2809,16 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) hd_info.len = (u16)msglen; hd_info.channel = SDPCM_CONTROL_CHANNEL; hd_info.dat_offset = doff; + hd_info.seq_num = bus->tx_seq; + if (bus->txglom) { + hd_info.lastfrm = true; + hd_info.tail_pad = pad; + } brcmf_sdio_hdpack(bus, frame, &hd_info); + if (bus->txglom) + brcmf_sdio_update_hwhdr(frame, len); + if (!data_ok(bus)) { brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", bus->tx_max, bus->tx_seq); @@ -3435,11 +3533,15 @@ static int brcmf_sdbrcm_bus_preinit(struct device *dev) struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; + uint pad_size; u32 value; u8 idx; int err; - /* sdio bus core specific dcmd */ + /* the commands below use the terms tx and rx from + * a device perspective, ie. bus:txglom affects the + * bus transfers from device to host. + */ idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); if (bus->ci->c_inf[idx].rev < 12) { /* for sdio core rev < 12, disable txgloming */ @@ -3456,6 +3558,32 @@ static int brcmf_sdbrcm_bus_preinit(struct device *dev) err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, sizeof(u32)); } + + if (err < 0) + goto done; + + bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; + if (sdiodev->sg_support) { + bus->txglom = false; + value = 1; + pad_size = bus->sdiodev->func[2]->cur_blksize << 1; + bus->txglom_sgpad = brcmu_pkt_buf_get_skb(pad_size); + if (!bus->txglom_sgpad) + brcmf_err("allocating txglom padding skb failed, reduced performance\n"); + + err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom", + &value, sizeof(u32)); + if (err < 0) { + /* bus:rxglom is allowed to fail */ + err = 0; + } else { + bus->txglom = true; + bus->tx_hdrlen += SDPCM_HWEXT_LEN; + } + } + brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen); + +done: return err; } @@ -3929,6 +4057,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus) brcmf_sdbrcm_release_dongle(bus); } + brcmu_pkt_buf_free_skb(bus->txglom_sgpad); brcmf_sdbrcm_release_malloc(bus); kfree(bus); @@ -4034,8 +4163,6 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) brcmf_sdio_debugfs_create(bus); brcmf_dbg(INFO, "completed!!\n"); - brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen); - /* if firmware path present try to download and bring up bus */ ret = brcmf_bus_start(bus->sdiodev->dev); if (ret != 0) { |