diff options
| -rw-r--r-- | drivers/acpi/acpica/Makefile | 1 | ||||
| -rw-r--r-- | drivers/acpi/acpica/exconcat.c | 439 | ||||
| -rw-r--r-- | drivers/acpi/acpica/exmisc.c | 290 |
3 files changed, 440 insertions, 290 deletions
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index f682374c19f4..188597fface7 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -43,6 +43,7 @@ acpi-y += \ evxfregn.o acpi-y += \ + exconcat.o \ exconfig.o \ exconvrt.o \ excreate.o \ diff --git a/drivers/acpi/acpica/exconcat.c b/drivers/acpi/acpica/exconcat.c new file mode 100644 index 000000000000..553e0146338e --- /dev/null +++ b/drivers/acpi/acpica/exconcat.c @@ -0,0 +1,439 @@ +/****************************************************************************** + * + * Module Name: exconcat - Concatenate-type AML operators + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2016, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acinterp.h" +#include "amlresrc.h" + +#define _COMPONENT ACPI_EXECUTER +ACPI_MODULE_NAME("exconcat") + +/* Local Prototypes */ +static acpi_status +acpi_ex_convert_to_object_type_string(union acpi_operand_object *obj_desc, + union acpi_operand_object **result_desc); + +/******************************************************************************* + * + * FUNCTION: acpi_ex_do_concatenate + * + * PARAMETERS: operand0 - First source object + * operand1 - Second source object + * actual_return_desc - Where to place the return object + * walk_state - Current walk state + * + * RETURN: Status + * + * DESCRIPTION: Concatenate two objects with the ACPI-defined conversion + * rules as necessary. + * NOTE: + * Per the ACPI spec (up to 6.1), Concatenate only supports Integer, + * String, and Buffer objects. However, we support all objects here + * as an extension. This improves the usefulness of both Concatenate + * and the Printf/Fprintf macros. The extension returns a string + * describing the object type for the other objects. + * 02/2016. + * + ******************************************************************************/ + +acpi_status +acpi_ex_do_concatenate(union acpi_operand_object *operand0, + union acpi_operand_object *operand1, + union acpi_operand_object **actual_return_desc, + struct acpi_walk_state *walk_state) +{ + union acpi_operand_object *local_operand0 = operand0; + union acpi_operand_object *local_operand1 = operand1; + union acpi_operand_object *temp_operand1 = NULL; + union acpi_operand_object *return_desc; + char *buffer; + acpi_object_type operand0_type; + acpi_object_type operand1_type; + acpi_status status; + + ACPI_FUNCTION_TRACE(ex_do_concatenate); + + /* Operand 0 preprocessing */ + + switch (operand0->common.type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_BUFFER: + + operand0_type = operand0->common.type; + break; + + default: + + /* For all other types, get the "object type" string */ + + status = + acpi_ex_convert_to_object_type_string(operand0, + &local_operand0); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + operand0_type = ACPI_TYPE_STRING; + break; + } + + /* Operand 1 preprocessing */ + + switch (operand1->common.type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_BUFFER: + + operand1_type = operand1->common.type; + break; + + default: + + /* For all other types, get the "object type" string */ + + status = + acpi_ex_convert_to_object_type_string(operand1, + &local_operand1); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + operand1_type = ACPI_TYPE_STRING; + break; + } + + /* + * Convert the second operand if necessary. The first operand (0) + * determines the type of the second operand (1) (See the Data Types + * section of the ACPI specification). Both object types are + * guaranteed to be either Integer/String/Buffer by the operand + * resolution mechanism. + */ + switch (operand0_type) { + case ACPI_TYPE_INTEGER: + + status = + acpi_ex_convert_to_integer(local_operand1, &temp_operand1, + 16); + break; + + case ACPI_TYPE_BUFFER: + + status = + acpi_ex_convert_to_buffer(local_operand1, &temp_operand1); + break; + + case ACPI_TYPE_STRING: + + switch (operand1_type) { + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_BUFFER: + + /* Other types have already been converted to string */ + + status = + acpi_ex_convert_to_string(local_operand1, + &temp_operand1, + ACPI_IMPLICIT_CONVERT_HEX); + break; + + default: + + status = AE_OK; + break; + } + break; + + default: + + ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X", + operand0->common.type)); + status = AE_AML_INTERNAL; + } + + if (ACPI_FAILURE(status)) { + goto cleanup; + } + + /* Take care with any newly created operand objects */ + + if ((local_operand1 != operand1) && (local_operand1 != temp_operand1)) { + acpi_ut_remove_reference(local_operand1); + } + + local_operand1 = temp_operand1; + + /* + * Both operands are now known to be the same object type + * (Both are Integer, String, or Buffer), and we can now perform + * the concatenation. + * + * There are three cases to handle, as per the ACPI spec: + * + * 1) Two Integers concatenated to produce a new Buffer + * 2) Two Strings concatenated to produce a new String + * 3) Two Buffers concatenated to produce a new Buffer + */ + switch (operand0_type) { + case ACPI_TYPE_INTEGER: + + /* Result of two Integers is a Buffer */ + /* Need enough buffer space for two integers */ + + return_desc = acpi_ut_create_buffer_object((acpi_size) + ACPI_MUL_2 + (acpi_gbl_integer_byte_width)); + if (!return_desc) { + status = AE_NO_MEMORY; + goto cleanup; + } + + buffer = (char *)return_desc->buffer.pointer; + + /* Copy the first integer, LSB first */ + + memcpy(buffer, &operand0->integer.value, + acpi_gbl_integer_byte_width); + + /* Copy the second integer (LSB first) after the first */ + + memcpy(buffer + acpi_gbl_integer_byte_width, + &local_operand1->integer.value, + acpi_gbl_integer_byte_width); + break; + + case ACPI_TYPE_STRING: + + /* Result of two Strings is a String */ + + return_desc = acpi_ut_create_string_object(((acpi_size) + local_operand0-> + string.length + + local_operand1-> + string.length)); + if (!return_desc) { + status = AE_NO_MEMORY; + goto cleanup; + } + + buffer = return_desc->string.pointer; + + /* Concatenate the strings */ + + strcpy(buffer, local_operand0->string.pointer); + strcat(buffer, local_operand1->string.pointer); + break; + + case ACPI_TYPE_BUFFER: + + /* Result of two Buffers is a Buffer */ + + return_desc = acpi_ut_create_buffer_object(((acpi_size) + operand0->buffer. + length + + local_operand1-> + buffer.length)); + if (!return_desc) { + status = AE_NO_MEMORY; + goto cleanup; + } + + buffer = (char *)return_desc->buffer.pointer; + + /* Concatenate the buffers */ + + memcpy(buffer, operand0->buffer.pointer, + operand0->buffer.length); + memcpy(buffer + operand0->buffer.length, + local_operand1->buffer.pointer, + local_operand1->buffer.length); + break; + + default: + + /* Invalid object type, should not happen here */ + + ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X", + operand0->common.type)); + status = AE_AML_INTERNAL; + goto cleanup; + } + + *actual_return_desc = return_desc; + +cleanup: + if (local_operand0 != operand0) { + acpi_ut_remove_reference(local_operand0); + } + + if (local_operand1 != operand1) { + acpi_ut_remove_reference(local_operand1); + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_convert_to_object_type_string + * + * PARAMETERS: obj_desc - Object to be converted + * return_desc - Where to place the return object + * + * RETURN: Status + * + * DESCRIPTION: Convert an object of arbitrary type to a string object that + * contains the namestring for the object. Used for the + * concatenate operator. + * + ******************************************************************************/ + +static acpi_status +acpi_ex_convert_to_object_type_string(union acpi_operand_object *obj_desc, + union acpi_operand_object **result_desc) +{ + union acpi_operand_object *return_desc; + const char *type_string; + + type_string = acpi_ut_get_type_name(obj_desc->common.type); + + return_desc = acpi_ut_create_string_object(((acpi_size) strlen(type_string) + 9)); /* 9 For "[ Object]" */ + if (!return_desc) { + return (AE_NO_MEMORY); + } + + strcpy(return_desc->string.pointer, "["); + strcat(return_desc->string.pointer, type_string); + strcat(return_desc->string.pointer, " Object]"); + + *result_desc = return_desc; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_concat_template + * + * PARAMETERS: operand0 - First source object + * operand1 - Second source object + * actual_return_desc - Where to place the return object + * walk_state - Current walk state + * + * RETURN: Status + * + * DESCRIPTION: Concatenate two resource templates + * + ******************************************************************************/ + +acpi_status +acpi_ex_concat_template(union acpi_operand_object *operand0, + union acpi_operand_object *operand1, + union acpi_operand_object **actual_return_desc, + struct acpi_walk_state * walk_state) +{ + acpi_status status; + union acpi_operand_object *return_desc; + u8 *new_buf; + u8 *end_tag; + acpi_size length0; + acpi_size length1; + acpi_size new_length; + + ACPI_FUNCTION_TRACE(ex_concat_template); + + /* + * Find the end_tag descriptor in each resource template. + * Note1: returned pointers point TO the end_tag, not past it. + * Note2: zero-length buffers are allowed; treated like one end_tag + */ + + /* Get the length of the first resource template */ + + status = acpi_ut_get_resource_end_tag(operand0, &end_tag); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + length0 = ACPI_PTR_DIFF(end_tag, operand0->buffer.pointer); + + /* Get the length of the second resource template */ + + status = acpi_ut_get_resource_end_tag(operand1, &end_tag); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + length1 = ACPI_PTR_DIFF(end_tag, operand1->buffer.pointer); + + /* Combine both lengths, minimum size will be 2 for end_tag */ + + new_length = length0 + length1 + sizeof(struct aml_resource_end_tag); + + /* Create a new buffer object for the result (with one end_tag) */ + + return_desc = acpi_ut_create_buffer_object(new_length); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + /* + * Copy the templates to the new buffer, 0 first, then 1 follows. One + * end_tag descriptor is copied from Operand1. + */ + new_buf = return_desc->buffer.pointer; + memcpy(new_buf, operand0->buffer.pointer, length0); + memcpy(new_buf + length0, operand1->buffer.pointer, length1); + + /* Insert end_tag and set the checksum to zero, means "ignore checksum" */ + + new_buf[new_length - 1] = 0; + new_buf[new_length - 2] = ACPI_RESOURCE_NAME_END_TAG | 1; + + /* Return the completed resource template */ + + *actual_return_desc = return_desc; + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index db30ae43ddd8..4f7e667624b3 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -45,7 +45,6 @@ #include "accommon.h" #include "acinterp.h" #include "amlcode.h" -#include "amlresrc.h" #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("exmisc") @@ -140,295 +139,6 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc, /******************************************************************************* * - * FUNCTION: acpi_ex_concat_template - * - * PARAMETERS: operand0 - First source object - * operand1 - Second source object - * actual_return_desc - Where to place the return object - * walk_state - Current walk state - * - * RETURN: Status - * - * DESCRIPTION: Concatenate two resource templates - * - ******************************************************************************/ - -acpi_status -acpi_ex_concat_template(union acpi_operand_object *operand0, - union acpi_operand_object *operand1, - union acpi_operand_object **actual_return_desc, - struct acpi_walk_state *walk_state) -{ - acpi_status status; - union acpi_operand_object *return_desc; - u8 *new_buf; - u8 *end_tag; - acpi_size length0; - acpi_size length1; - acpi_size new_length; - - ACPI_FUNCTION_TRACE(ex_concat_template); - - /* - * Find the end_tag descriptor in each resource template. - * Note1: returned pointers point TO the end_tag, not past it. - * Note2: zero-length buffers are allowed; treated like one end_tag - */ - - /* Get the length of the first resource template */ - - status = acpi_ut_get_resource_end_tag(operand0, &end_tag); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - length0 = ACPI_PTR_DIFF(end_tag, operand0->buffer.pointer); - - /* Get the length of the second resource template */ - - status = acpi_ut_get_resource_end_tag(operand1, &end_tag); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - length1 = ACPI_PTR_DIFF(end_tag, operand1->buffer.pointer); - - /* Combine both lengths, minimum size will be 2 for end_tag */ - - new_length = length0 + length1 + sizeof(struct aml_resource_end_tag); - - /* Create a new buffer object for the result (with one end_tag) */ - - return_desc = acpi_ut_create_buffer_object(new_length); - if (!return_desc) { - return_ACPI_STATUS(AE_NO_MEMORY); - } - - /* - * Copy the templates to the new buffer, 0 first, then 1 follows. One - * end_tag descriptor is copied from Operand1. - */ - new_buf = return_desc->buffer.pointer; - memcpy(new_buf, operand0->buffer.pointer, length0); - memcpy(new_buf + length0, operand1->buffer.pointer, length1); - - /* Insert end_tag and set the checksum to zero, means "ignore checksum" */ - - new_buf[new_length - 1] = 0; - new_buf[new_length - 2] = ACPI_RESOURCE_NAME_END_TAG | 1; - - /* Return the completed resource template */ - - *actual_return_desc = return_desc; - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_do_concatenate - * - * PARAMETERS: operand0 - First source object - * operand1 - Second source object - * actual_return_desc - Where to place the return object - * walk_state - Current walk state - * - * RETURN: Status - * - * DESCRIPTION: Concatenate two objects OF THE SAME TYPE. - * - ******************************************************************************/ - -acpi_status -acpi_ex_do_concatenate(union acpi_operand_object *operand0, - union acpi_operand_object *operand1, - union acpi_operand_object **actual_return_desc, - struct acpi_walk_state *walk_state) -{ - union acpi_operand_object *local_operand1 = operand1; - union acpi_operand_object *return_desc; - char *new_buf; - const char *type_string; - acpi_status status; - - ACPI_FUNCTION_TRACE(ex_do_concatenate); - - /* - * Convert the second operand if necessary. The first operand - * determines the type of the second operand, (See the Data Types - * section of the ACPI specification.) Both object types are - * guaranteed to be either Integer/String/Buffer by the operand - * resolution mechanism. - */ - switch (operand0->common.type) { - case ACPI_TYPE_INTEGER: - - status = - acpi_ex_convert_to_integer(operand1, &local_operand1, 16); - break; - - case ACPI_TYPE_STRING: - /* - * Per the ACPI spec, Concatenate only supports int/str/buf. - * However, we support all objects here as an extension. - * This improves the usefulness of the Printf() macro. - * 12/2015. - */ - switch (operand1->common.type) { - case ACPI_TYPE_INTEGER: - case ACPI_TYPE_STRING: - case ACPI_TYPE_BUFFER: - - status = - acpi_ex_convert_to_string(operand1, &local_operand1, - ACPI_IMPLICIT_CONVERT_HEX); - break; - - default: - /* - * Just emit a string containing the object type. - */ - type_string = - acpi_ut_get_type_name(operand1->common.type); - - local_operand1 = acpi_ut_create_string_object(((acpi_size) strlen(type_string) + 9)); /* 9 For "[Object]" */ - if (!local_operand1) { - status = AE_NO_MEMORY; - goto cleanup; - } - - strcpy(local_operand1->string.pointer, "["); - strcat(local_operand1->string.pointer, type_string); - strcat(local_operand1->string.pointer, " Object]"); - status = AE_OK; - break; - } - break; - - case ACPI_TYPE_BUFFER: - - status = acpi_ex_convert_to_buffer(operand1, &local_operand1); - break; - - default: - - ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X", - operand0->common.type)); - status = AE_AML_INTERNAL; - } - - if (ACPI_FAILURE(status)) { - goto cleanup; - } - - /* - * Both operands are now known to be the same object type - * (Both are Integer, String, or Buffer), and we can now perform the - * concatenation. - */ - - /* - * There are three cases to handle: - * - * 1) Two Integers concatenated to produce a new Buffer - * 2) Two Strings concatenated to produce a new String - * 3) Two Buffers concatenated to produce a new Buffer - */ - switch (operand0->common.type) { - case ACPI_TYPE_INTEGER: - - /* Result of two Integers is a Buffer */ - /* Need enough buffer space for two integers */ - - return_desc = acpi_ut_create_buffer_object((acpi_size) - ACPI_MUL_2 - (acpi_gbl_integer_byte_width)); - if (!return_desc) { - status = AE_NO_MEMORY; - goto cleanup; - } - - new_buf = (char *)return_desc->buffer.pointer; - - /* Copy the first integer, LSB first */ - - memcpy(new_buf, &operand0->integer.value, - acpi_gbl_integer_byte_width); - - /* Copy the second integer (LSB first) after the first */ - - memcpy(new_buf + acpi_gbl_integer_byte_width, - &local_operand1->integer.value, - acpi_gbl_integer_byte_width); - break; - - case ACPI_TYPE_STRING: - - /* Result of two Strings is a String */ - - return_desc = acpi_ut_create_string_object(((acpi_size) - operand0->string. - length + - local_operand1-> - string.length)); - if (!return_desc) { - status = AE_NO_MEMORY; - goto cleanup; - } - - new_buf = return_desc->string.pointer; - - /* Concatenate the strings */ - - strcpy(new_buf, operand0->string.pointer); - strcat(new_buf, local_operand1->string.pointer); - break; - - case ACPI_TYPE_BUFFER: - - /* Result of two Buffers is a Buffer */ - - return_desc = acpi_ut_create_buffer_object(((acpi_size) - operand0->buffer. - length + - local_operand1-> - buffer.length)); - if (!return_desc) { - status = AE_NO_MEMORY; - goto cleanup; - } - - new_buf = (char *)return_desc->buffer.pointer; - - /* Concatenate the buffers */ - - memcpy(new_buf, operand0->buffer.pointer, - operand0->buffer.length); - memcpy(new_buf + operand0->buffer.length, - local_operand1->buffer.pointer, - local_operand1->buffer.length); - break; - - default: - - /* Invalid object type, should not happen here */ - - ACPI_ERROR((AE_INFO, "Invalid object type: 0x%X", - operand0->common.type)); - status = AE_AML_INTERNAL; - goto cleanup; - } - - *actual_return_desc = return_desc; - -cleanup: - if (local_operand1 != operand1) { - acpi_ut_remove_reference(local_operand1); - } - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * * FUNCTION: acpi_ex_do_math_op * * PARAMETERS: opcode - AML opcode |