summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/mfd/rn5t618.txt4
-rw-r--r--drivers/iio/adc/Kconfig10
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/rn5t618-adc.c256
-rw-r--r--drivers/mfd/Kconfig1
-rw-r--r--drivers/mfd/rn5t618.c109
-rw-r--r--drivers/rtc/Kconfig10
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-rc5t619.c444
-rw-r--r--include/linux/mfd/rn5t618.h26
10 files changed, 851 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index b74e5e94d1cb..16778ea00dbc 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -15,6 +15,8 @@ Required properties:
- reg: the I2C slave address of the device
Optional properties:
+ - interrupts: interrupt mapping for IRQ
+ See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- system-power-controller:
See Documentation/devicetree/bindings/power/power-controller.txt
@@ -32,6 +34,8 @@ Example:
pmic@32 {
compatible = "ricoh,rn5t618";
reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
system-power-controller;
regulators {
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 82e33082958c..300904b93656 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -783,6 +783,16 @@ config RCAR_GYRO_ADC
To compile this driver as a module, choose M here: the
module will be called rcar-gyroadc.
+config RN5T618_ADC
+ tristate "ADC for the RN5T618/RC5T619 family of chips"
+ depends on MFD_RN5T618
+ help
+ Say yes here to build support for the integrated ADC inside the
+ RN5T618/619 series PMICs:
+
+ This driver can also be built as a module. If so, the module
+ will be called rn5t618-adc.
+
config ROCKCHIP_SARADC
tristate "Rockchip SARADC driver"
depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 919228900df9..b182d234f45a 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o
obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
+obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/iio/adc/rn5t618-adc.c b/drivers/iio/adc/rn5t618-adc.c
new file mode 100644
index 000000000000..f21027e4e26a
--- /dev/null
+++ b/drivers/iio/adc/rn5t618-adc.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADC driver for the RICOH RN5T618 power management chip family
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/slab.h>
+
+#define RN5T618_ADC_CONVERSION_TIMEOUT (msecs_to_jiffies(500))
+#define RN5T618_REFERENCE_VOLT 2500
+
+/* mask for selecting channels for single conversion */
+#define RN5T618_ADCCNT3_CHANNEL_MASK 0x7
+/* average 4-time conversion mode */
+#define RN5T618_ADCCNT3_AVG BIT(3)
+/* set for starting a single conversion, gets cleared by hw when done */
+#define RN5T618_ADCCNT3_GODONE BIT(4)
+/* automatic conversion, period is in ADCCNT2, selected channels are
+ * in ADCCNT1
+ */
+#define RN5T618_ADCCNT3_AUTO BIT(5)
+#define RN5T618_ADCEND_IRQ BIT(0)
+
+struct rn5t618_adc_data {
+ struct device *dev;
+ struct rn5t618 *rn5t618;
+ struct completion conv_completion;
+ int irq;
+};
+
+struct rn5t618_channel_ratios {
+ u16 numerator;
+ u16 denominator;
+};
+
+enum rn5t618_channels {
+ LIMMON = 0,
+ VBAT,
+ VADP,
+ VUSB,
+ VSYS,
+ VTHM,
+ AIN1,
+ AIN0
+};
+
+static const struct rn5t618_channel_ratios rn5t618_ratios[8] = {
+ [LIMMON] = {50, 32}, /* measured across 20mOhm, amplified by 32 */
+ [VBAT] = {2, 1},
+ [VADP] = {3, 1},
+ [VUSB] = {3, 1},
+ [VSYS] = {3, 1},
+ [VTHM] = {1, 1},
+ [AIN1] = {1, 1},
+ [AIN0] = {1, 1},
+};
+
+static int rn5t618_read_adc_reg(struct rn5t618 *rn5t618, int reg, u16 *val)
+{
+ u8 data[2];
+ int ret;
+
+ ret = regmap_bulk_read(rn5t618->regmap, reg, data, sizeof(data));
+ if (ret < 0)
+ return ret;
+
+ *val = (data[0] << 4) | (data[1] & 0xF);
+
+ return 0;
+}
+
+static irqreturn_t rn5t618_adc_irq(int irq, void *data)
+{
+ struct rn5t618_adc_data *adc = data;
+ unsigned int r = 0;
+ int ret;
+
+ /* clear low & high threshold irqs */
+ regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC1, 0);
+ regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC2, 0);
+
+ ret = regmap_read(adc->rn5t618->regmap, RN5T618_IR_ADC3, &r);
+ if (ret < 0)
+ dev_err(adc->dev, "failed to read IRQ status: %d\n", ret);
+
+ regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC3, 0);
+
+ if (r & RN5T618_ADCEND_IRQ)
+ complete(&adc->conv_completion);
+
+ return IRQ_HANDLED;
+}
+
+static int rn5t618_adc_read(struct iio_dev *iio_dev,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2, long mask)
+{
+ struct rn5t618_adc_data *adc = iio_priv(iio_dev);
+ u16 raw;
+ int ret;
+
+ if (mask == IIO_CHAN_INFO_SCALE) {
+ *val = RN5T618_REFERENCE_VOLT *
+ rn5t618_ratios[chan->channel].numerator;
+ *val2 = rn5t618_ratios[chan->channel].denominator * 4095;
+
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ /* select channel */
+ ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+ RN5T618_ADCCNT3_CHANNEL_MASK,
+ chan->channel);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_write(adc->rn5t618->regmap, RN5T618_EN_ADCIR3,
+ RN5T618_ADCEND_IRQ);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+ RN5T618_ADCCNT3_AVG,
+ mask == IIO_CHAN_INFO_AVERAGE_RAW ?
+ RN5T618_ADCCNT3_AVG : 0);
+ if (ret < 0)
+ return ret;
+
+ init_completion(&adc->conv_completion);
+ /* single conversion */
+ ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
+ RN5T618_ADCCNT3_GODONE,
+ RN5T618_ADCCNT3_GODONE);
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&adc->conv_completion,
+ RN5T618_ADC_CONVERSION_TIMEOUT);
+ if (ret == 0) {
+ dev_warn(adc->dev, "timeout waiting for adc result\n");
+ return -ETIMEDOUT;
+ }
+
+ ret = rn5t618_read_adc_reg(adc->rn5t618,
+ RN5T618_ILIMDATAH + 2 * chan->channel,
+ &raw);
+ if (ret < 0)
+ return ret;
+
+ *val = raw;
+
+ return IIO_VAL_INT;
+}
+
+static const struct iio_info rn5t618_adc_iio_info = {
+ .read_raw = &rn5t618_adc_read,
+};
+
+#define RN5T618_ADC_CHANNEL(_channel, _type, _name) { \
+ .type = _type, \
+ .channel = _channel, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .datasheet_name = _name, \
+ .indexed = 1. \
+}
+
+static const struct iio_chan_spec rn5t618_adc_iio_channels[] = {
+ RN5T618_ADC_CHANNEL(LIMMON, IIO_CURRENT, "LIMMON"),
+ RN5T618_ADC_CHANNEL(VBAT, IIO_VOLTAGE, "VBAT"),
+ RN5T618_ADC_CHANNEL(VADP, IIO_VOLTAGE, "VADP"),
+ RN5T618_ADC_CHANNEL(VUSB, IIO_VOLTAGE, "VUSB"),
+ RN5T618_ADC_CHANNEL(VSYS, IIO_VOLTAGE, "VSYS"),
+ RN5T618_ADC_CHANNEL(VTHM, IIO_VOLTAGE, "VTHM"),
+ RN5T618_ADC_CHANNEL(AIN1, IIO_VOLTAGE, "AIN1"),
+ RN5T618_ADC_CHANNEL(AIN0, IIO_VOLTAGE, "AIN0")
+};
+
+static int rn5t618_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct iio_dev *iio_dev;
+ struct rn5t618_adc_data *adc;
+ struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+
+ iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+ if (!iio_dev) {
+ dev_err(&pdev->dev, "failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ adc = iio_priv(iio_dev);
+ adc->dev = &pdev->dev;
+ adc->rn5t618 = rn5t618;
+
+ if (rn5t618->irq_data)
+ adc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+ RN5T618_IRQ_ADC);
+
+ if (adc->irq <= 0) {
+ dev_err(&pdev->dev, "get virq failed\n");
+ return -EINVAL;
+ }
+
+ init_completion(&adc->conv_completion);
+
+ iio_dev->name = dev_name(&pdev->dev);
+ iio_dev->dev.parent = &pdev->dev;
+ iio_dev->info = &rn5t618_adc_iio_info;
+ iio_dev->modes = INDIO_DIRECT_MODE;
+ iio_dev->channels = rn5t618_adc_iio_channels;
+ iio_dev->num_channels = ARRAY_SIZE(rn5t618_adc_iio_channels);
+
+ /* stop any auto-conversion */
+ ret = regmap_write(rn5t618->regmap, RN5T618_ADCCNT3, 0);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, iio_dev);
+
+ ret = devm_request_threaded_irq(adc->dev, adc->irq, NULL,
+ rn5t618_adc_irq,
+ IRQF_ONESHOT, dev_name(adc->dev),
+ adc);
+ if (ret < 0) {
+ dev_err(adc->dev, "request irq %d failed: %d\n", adc->irq, ret);
+ return ret;
+ }
+
+ return devm_iio_device_register(adc->dev, iio_dev);
+}
+
+static struct platform_driver rn5t618_adc_driver = {
+ .driver = {
+ .name = "rn5t618-adc",
+ },
+ .probe = rn5t618_adc_probe,
+};
+
+module_platform_driver(rn5t618_adc_driver);
+MODULE_ALIAS("platform:rn5t618-adc");
+MODULE_DESCRIPTION("RICOH RN5T618 ADC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index daefcb6310f9..da4a9a0c5ca2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1071,6 +1071,7 @@ config MFD_RN5T618
depends on OF
select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
help
Say yes here to add support for the Ricoh RN5T567,
RN5T618, RC5T619 PMIC.
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index ead2e79036a9..232de50562f9 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -8,10 +8,13 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -20,6 +23,13 @@ static const struct mfd_cell rn5t618_cells[] = {
{ .name = "rn5t618-wdt" },
};
+static const struct mfd_cell rc5t619_cells[] = {
+ { .name = "rn5t618-adc" },
+ { .name = "rn5t618-regulator" },
+ { .name = "rc5t619-rtc" },
+ { .name = "rn5t618-wdt" },
+};
+
static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -32,6 +42,8 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
case RN5T618_IR_GPF:
case RN5T618_MON_IOIN:
case RN5T618_INTMON:
+ case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
+ case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
return true;
default:
return false;
@@ -46,9 +58,56 @@ static const struct regmap_config rn5t618_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_irq rc5t619_irqs[] = {
+ REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
+ REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+ .name = "rc5t619",
+ .irqs = rc5t619_irqs,
+ .num_irqs = ARRAY_SIZE(rc5t619_irqs),
+ .num_regs = 1,
+ .status_base = RN5T618_INTMON,
+ .mask_base = RN5T618_INTEN,
+ .mask_invert = true,
+};
+
static struct rn5t618 *rn5t618_pm_power_off;
static struct notifier_block rn5t618_restart_handler;
+static int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+ const struct regmap_irq_chip *irq_chip = NULL;
+ int ret;
+
+ if (!rn5t618->irq)
+ return 0;
+
+ switch (rn5t618->variant) {
+ case RC5T619:
+ irq_chip = &rc5t619_irq_chip;
+ break;
+ default:
+ dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
+ (int)rn5t618->variant);
+ return -ENOENT;
+ }
+
+ ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+ rn5t618->irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ 0, irq_chip, &rn5t618->irq_data);
+ if (ret)
+ dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+
+ return ret;
+}
+
static void rn5t618_trigger_poweroff_sequence(bool repower)
{
/* disable automatic repower-on */
@@ -87,8 +146,7 @@ static const struct of_device_id rn5t618_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
-static int rn5t618_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int rn5t618_i2c_probe(struct i2c_client *i2c)
{
const struct of_device_id *of_id;
struct rn5t618 *priv;
@@ -106,6 +164,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, priv);
priv->variant = (long)of_id->data;
+ priv->irq = i2c->irq;
+ priv->dev = &i2c->dev;
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
if (IS_ERR(priv->regmap)) {
@@ -114,8 +174,16 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
- ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
- ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
+ if (priv->variant == RC5T619)
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+ rc5t619_cells,
+ ARRAY_SIZE(rc5t619_cells),
+ NULL, 0, NULL);
+ else
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+ rn5t618_cells,
+ ARRAY_SIZE(rn5t618_cells),
+ NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
return ret;
@@ -138,7 +206,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}
- return 0;
+ return rn5t618_irq_init(priv);
}
static int rn5t618_i2c_remove(struct i2c_client *i2c)
@@ -155,19 +223,38 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
return 0;
}
-static const struct i2c_device_id rn5t618_i2c_id[] = {
- { }
-};
-MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+ struct rn5t618 *priv = dev_get_drvdata(dev);
+
+ if (priv->irq)
+ disable_irq(priv->irq);
+
+ return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+ struct rn5t618 *priv = dev_get_drvdata(dev);
+
+ if (priv->irq)
+ enable_irq(priv->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+ rn5t618_i2c_suspend,
+ rn5t618_i2c_resume);
static struct i2c_driver rn5t618_i2c_driver = {
.driver = {
.name = "rn5t618",
.of_match_table = of_match_ptr(rn5t618_of_match),
+ .pm = &rn5t618_i2c_dev_pm_ops,
},
- .probe = rn5t618_i2c_probe,
+ .probe_new = rn5t618_i2c_probe,
.remove = rn5t618_i2c_remove,
- .id_table = rn5t618_i2c_id,
};
module_i2c_driver(rn5t618_i2c_driver);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 34c8b6c7e095..72fed8dc55e8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -591,6 +591,16 @@ config RTC_DRV_RC5T583
This driver can also be built as a module. If so, the module
will be called rtc-rc5t583.
+config RTC_DRV_RC5T619
+ tristate "RICOH RC5T619 RTC driver"
+ depends on MFD_RN5T618
+ help
+ If you say yes here you get support for the RTC on the
+ RICOH RC5T619 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rc5t619.
+
config RTC_DRV_S35390A
tristate "Seiko Instruments S-35390A"
select BITREVERSE
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4ac8f19fb631..7612912cdf00 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
obj-$(CONFIG_RTC_DRV_R7301) += rtc-r7301.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RC5T583) += rtc-rc5t583.o
+obj-$(CONFIG_RTC_DRV_RC5T619) += rtc-rc5t619.o
obj-$(CONFIG_RTC_DRV_RK808) += rtc-rk808.o
obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
diff --git a/drivers/rtc/rtc-rc5t619.c b/drivers/rtc/rtc-rc5t619.c
new file mode 100644
index 000000000000..24e386ecbc7e
--- /dev/null
+++ b/drivers/rtc/rtc-rc5t619.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/rtc/rtc-rc5t619.c
+ *
+ * Real time clock driver for RICOH RC5T619 power management chip.
+ *
+ * Copyright (C) 2019 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+
+struct rc5t619_rtc {
+ int irq;
+ struct rtc_device *rtc;
+ struct rn5t618 *rn5t618;
+};
+
+#define CTRL1_ALARM_ENABLED 0x40
+#define CTRL1_24HR 0x20
+#define CTRL1_PERIODIC_MASK 0xf
+
+#define CTRL2_PON 0x10
+#define CTRL2_ALARM_STATUS 0x80
+#define CTRL2_CTFG 0x4
+#define CTRL2_CTC 0x1
+
+#define MONTH_CENTFLAG 0x80
+#define HOUR_PMFLAG 0x20
+#define MDAY_DAL_EXT 0x80
+
+static uint8_t rtc5t619_12hour_bcd2bin(uint8_t hour)
+{
+ if (hour & HOUR_PMFLAG) {
+ hour = bcd2bin(hour & ~HOUR_PMFLAG);
+ return hour == 12 ? 12 : 12 + hour;
+ }
+
+ hour = bcd2bin(hour);
+ return hour == 12 ? 0 : hour;
+}
+
+static uint8_t rtc5t619_12hour_bin2bcd(uint8_t hour)
+{
+ if (!hour)
+ return 0x12;
+
+ if (hour < 12)
+ return bin2bcd(hour);
+
+ if (hour == 12)
+ return 0x12 | HOUR_PMFLAG;
+
+ return bin2bcd(hour - 12) | HOUR_PMFLAG;
+}
+
+static int rc5t619_rtc_periodic_disable(struct device *dev)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ int err;
+
+ /* disable function */
+ err = regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL1, CTRL1_PERIODIC_MASK, 0);
+ if (err < 0)
+ return err;
+
+ /* clear alarm flag and CTFG */
+ err = regmap_update_bits(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2,
+ CTRL2_ALARM_STATUS | CTRL2_CTFG | CTRL2_CTC,
+ 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* things to be done once after power on */
+static int rc5t619_rtc_pon_setup(struct device *dev)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ int err;
+ unsigned int reg_data;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &reg_data);
+ if (err < 0)
+ return err;
+
+ /* clear VDET PON */
+ reg_data &= ~(CTRL2_PON | CTRL2_CTC | 0x4a); /* 0101-1011 */
+ reg_data |= 0x20; /* 0010-0000 */
+ err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, reg_data);
+ if (err < 0)
+ return err;
+
+ /* clearing RTC Adjust register */
+ err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_ADJUST, 0);
+ if (err)
+ return err;
+
+ return regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL1,
+ CTRL1_24HR, CTRL1_24HR);
+}
+
+static int rc5t619_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[7];
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+ unsigned int ctrl2;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+ if (err < 0)
+ return err;
+
+ if (ctrl2 & CTRL2_PON)
+ return -EINVAL;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err < 0)
+ return err;
+
+ err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+ buff, sizeof(buff));
+ if (err < 0)
+ return err;
+
+ if (buff[5] & MONTH_CENTFLAG)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ tm->tm_sec = bcd2bin(buff[0]);
+ tm->tm_min = bcd2bin(buff[1]);
+
+ if (ctrl1 & CTRL1_24HR)
+ tm->tm_hour = bcd2bin(buff[2]);
+ else
+ tm->tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+ tm->tm_wday = bcd2bin(buff[3]);
+ tm->tm_mday = bcd2bin(buff[4]);
+ tm->tm_mon = bcd2bin(buff[5] & 0x1f) - 1; /* back to system 0-11 */
+ tm->tm_year = bcd2bin(buff[6]) + 100 * cent_flag;
+
+ return 0;
+}
+
+static int rc5t619_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[7];
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+ unsigned int ctrl2;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+ if (err < 0)
+ return err;
+
+ if (ctrl2 & CTRL2_PON)
+ rc5t619_rtc_pon_setup(dev);
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err < 0)
+ return err;
+
+ if (tm->tm_year >= 100)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ buff[0] = bin2bcd(tm->tm_sec);
+ buff[1] = bin2bcd(tm->tm_min);
+
+ if (ctrl1 & CTRL1_24HR)
+ buff[2] = bin2bcd(tm->tm_hour);
+ else
+ buff[2] = rtc5t619_12hour_bin2bcd(tm->tm_hour);
+
+ buff[3] = bin2bcd(tm->tm_wday);
+ buff[4] = bin2bcd(tm->tm_mday);
+ buff[5] = bin2bcd(tm->tm_mon + 1); /* system set 0-11 */
+ buff[6] = bin2bcd(tm->tm_year - cent_flag * 100);
+
+ if (cent_flag)
+ buff[5] |= MONTH_CENTFLAG;
+
+ err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
+ buff, sizeof(buff));
+ if (err < 0) {
+ dev_err(dev, "failed to program new time: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/* 0-disable, 1-enable */
+static int rc5t619_rtc_alarm_enable(struct device *dev, unsigned int enabled)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+ return regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL1,
+ CTRL1_ALARM_ENABLED,
+ enabled ? CTRL1_ALARM_ENABLED : 0);
+}
+
+static int rc5t619_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[6];
+ unsigned int buff_cent;
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err)
+ return err;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_MONTH, &buff_cent);
+ if (err < 0) {
+ dev_err(dev, "failed to read time: %d\n", err);
+ return err;
+ }
+
+ if (buff_cent & MONTH_CENTFLAG)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+ buff, sizeof(buff));
+ if (err)
+ return err;
+
+ buff[3] = buff[3] & 0x3f;
+
+ alrm->time.tm_sec = bcd2bin(buff[0]);
+ alrm->time.tm_min = bcd2bin(buff[1]);
+
+ if (ctrl1 & CTRL1_24HR)
+ alrm->time.tm_hour = bcd2bin(buff[2]);
+ else
+ alrm->time.tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
+
+ alrm->time.tm_mday = bcd2bin(buff[3]);
+ alrm->time.tm_mon = bcd2bin(buff[4]) - 1;
+ alrm->time.tm_year = bcd2bin(buff[5]) + 100 * cent_flag;
+ alrm->enabled = !!(ctrl1 & CTRL1_ALARM_ENABLED);
+ dev_dbg(dev, "read alarm: %ptR\n", &alrm->time);
+
+ return 0;
+}
+
+static int rc5t619_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+ u8 buff[6];
+ int err;
+ int cent_flag;
+ unsigned int ctrl1;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
+ if (err)
+ return err;
+
+ err = rc5t619_rtc_alarm_enable(dev, 0);
+ if (err < 0)
+ return err;
+
+ if (rtc->irq == -1)
+ return -EINVAL;
+
+ if (alrm->enabled == 0)
+ return 0;
+
+ if (alrm->time.tm_year >= 100)
+ cent_flag = 1;
+ else
+ cent_flag = 0;
+
+ alrm->time.tm_mon += 1;
+ buff[0] = bin2bcd(alrm->time.tm_sec);
+ buff[1] = bin2bcd(alrm->time.tm_min);
+
+ if (ctrl1 & CTRL1_24HR)
+ buff[2] = bin2bcd(alrm->time.tm_hour);
+ else
+ buff[2] = rtc5t619_12hour_bin2bcd(alrm->time.tm_hour);
+
+ buff[3] = bin2bcd(alrm->time.tm_mday);
+ buff[4] = bin2bcd(alrm->time.tm_mon);
+ buff[5] = bin2bcd(alrm->time.tm_year - 100 * cent_flag);
+ buff[3] |= MDAY_DAL_EXT;
+
+ err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
+ buff, sizeof(buff));
+ if (err < 0)
+ return err;
+
+ return rc5t619_rtc_alarm_enable(dev, alrm->enabled);
+}
+
+static const struct rtc_class_ops rc5t619_rtc_ops = {
+ .read_time = rc5t619_rtc_read_time,
+ .set_time = rc5t619_rtc_set_time,
+ .set_alarm = rc5t619_rtc_set_alarm,
+ .read_alarm = rc5t619_rtc_read_alarm,
+ .alarm_irq_enable = rc5t619_rtc_alarm_enable,
+};
+
+static int rc5t619_rtc_alarm_flag_clr(struct device *dev)
+{
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+ /* clear alarm-D status bits.*/
+ return regmap_update_bits(rtc->rn5t618->regmap,
+ RN5T618_RTC_CTRL2,
+ CTRL2_ALARM_STATUS | CTRL2_CTC, 0);
+}
+
+static irqreturn_t rc5t619_rtc_irq(int irq, void *data)
+{
+ struct device *dev = data;
+ struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
+
+ rc5t619_rtc_alarm_flag_clr(dev);
+
+ rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
+ return IRQ_HANDLED;
+}
+
+static int rc5t619_rtc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+ struct rc5t619_rtc *rtc;
+ unsigned int ctrl2;
+ int err;
+
+ rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
+ if (IS_ERR(rtc)) {
+ err = PTR_ERR(rtc);
+ return -ENOMEM;
+ }
+
+ rtc->rn5t618 = rn5t618;
+
+ dev_set_drvdata(dev, rtc);
+ rtc->irq = -1;
+
+ if (rn5t618->irq_data)
+ rtc->irq = regmap_irq_get_virq(rn5t618->irq_data,
+ RN5T618_IRQ_RTC);
+
+ if (rtc->irq < 0)
+ rtc->irq = -1;
+
+ err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
+ if (err < 0)
+ return err;
+
+ /* disable rtc periodic function */
+ err = rc5t619_rtc_periodic_disable(&pdev->dev);
+ if (err)
+ return err;
+
+ if (ctrl2 & CTRL2_PON) {
+ err = rc5t619_rtc_alarm_flag_clr(&pdev->dev);
+ if (err)
+ return err;
+ }
+
+ rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc->rtc)) {
+ err = PTR_ERR(rtc->rtc);
+ dev_err(dev, "RTC device register: err %d\n", err);
+ return err;
+ }
+
+ rtc->rtc->ops = &rc5t619_rtc_ops;
+ rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+ /* set interrupt and enable it */
+ if (rtc->irq != -1) {
+ err = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+ rc5t619_rtc_irq,
+ IRQF_ONESHOT,
+ "rtc-rc5t619",
+ &pdev->dev);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
+ rtc->irq = -1;
+
+ err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+ if (err)
+ return err;
+
+ } else {
+ /* enable wake */
+ device_init_wakeup(&pdev->dev, 1);
+ enable_irq_wake(rtc->irq);
+ }
+ } else {
+ /* system don't want to using alarm interrupt, so close it */
+ err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
+ if (err)
+ return err;
+
+ dev_warn(&pdev->dev, "rc5t619 interrupt is disabled\n");
+ }
+
+ return rtc_register_device(rtc->rtc);
+}
+
+static struct platform_driver rc5t619_rtc_driver = {
+ .driver = {
+ .name = "rc5t619-rtc",
+ },
+ .probe = rc5t619_rtc_probe,
+};
+
+module_platform_driver(rc5t619_rtc_driver);
+MODULE_ALIAS("platform:rc5t619-rtc");
+MODULE_DESCRIPTION("RICOH RC5T619 RTC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index d62ef48060b5..fba0df13d9a8 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -139,6 +139,17 @@
#define RN5T618_INTPOL 0x9c
#define RN5T618_INTEN 0x9d
#define RN5T618_INTMON 0x9e
+
+#define RN5T618_RTC_SECONDS 0xA0
+#define RN5T618_RTC_MDAY 0xA4
+#define RN5T618_RTC_MONTH 0xA5
+#define RN5T618_RTC_YEAR 0xA6
+#define RN5T618_RTC_ADJUST 0xA7
+#define RN5T618_RTC_ALARM_Y_SEC 0xA8
+#define RN5T618_RTC_DAL_MONTH 0xAC
+#define RN5T618_RTC_CTRL1 0xAE
+#define RN5T618_RTC_CTRL2 0xAF
+
#define RN5T618_PREVINDAC 0xb0
#define RN5T618_BATDAC 0xb1
#define RN5T618_CHGCTL1 0xb3
@@ -242,9 +253,24 @@ enum {
RC5T619,
};
+/* RN5T618 IRQ definitions */
+enum {
+ RN5T618_IRQ_SYS = 0,
+ RN5T618_IRQ_DCDC,
+ RN5T618_IRQ_RTC,
+ RN5T618_IRQ_ADC,
+ RN5T618_IRQ_GPIO,
+ RN5T618_IRQ_CHG,
+ RN5T618_NR_IRQS,
+};
+
struct rn5t618 {
struct regmap *regmap;
+ struct device *dev;
long variant;
+
+ int irq;
+ struct regmap_irq_chip_data *irq_data;
};
#endif /* __LINUX_MFD_RN5T618_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 18:43:08 +0000