diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 12 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 22 | ||||
| -rw-r--r-- | drivers/tty/sysrq.c | 4 |
5 files changed, 25 insertions, 17 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 61569a765d9e..76e03a7de9cc 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -675,7 +675,7 @@ static struct console univ8250_console = { .device = uart_console_device, .setup = univ8250_console_setup, .match = univ8250_console_match, - .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_CONSDEV, + .flags = CON_PRINTBUFFER | CON_ANYTIME, .index = -1, .data = &serial8250_reg, }; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index aa0166b6d450..116436b7fa52 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5642,17 +5642,15 @@ static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) static void serial8250_io_resume(struct pci_dev *dev) { struct serial_private *priv = pci_get_drvdata(dev); - const struct pciserial_board *board; + struct serial_private *new; if (!priv) return; - board = priv->board; - kfree(priv); - priv = pciserial_init_ports(dev, board); - - if (!IS_ERR(priv)) { - pci_set_drvdata(dev, priv); + new = pciserial_init_ports(dev, priv->board); + if (!IS_ERR(new)) { + pci_set_drvdata(dev, new); + kfree(priv); } } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fe4399b41df6..c13fec451d03 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1413,7 +1413,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) * Enable previously disabled RX interrupts. */ if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { - serial8250_clear_fifos(p); + serial8250_clear_and_reinit_fifos(p); p->ier |= UART_IER_RLSI | UART_IER_RDI; serial_port_out(&p->port, UART_IER, p->ier); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 168b10cad47b..fabbe76203bb 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -481,6 +481,14 @@ static void atmel_stop_tx(struct uart_port *port) /* disable PDC transmit */ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS); } + + /* + * Disable the transmitter. + * This is mandatory when DMA is used, otherwise the DMA buffer + * is fully transmitted. + */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS); + /* Disable interrupts */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); @@ -513,6 +521,9 @@ static void atmel_start_tx(struct uart_port *port) /* Enable interrupts */ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); + + /* re-enable the transmitter */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN); } /* @@ -798,6 +809,11 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); + else if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } spin_unlock_irqrestore(&port->lock, flags); } @@ -900,12 +916,6 @@ static void atmel_tx_dma(struct uart_port *port) desc->callback = atmel_complete_tx_dma; desc->callback_param = atmel_port; atmel_port->cookie_tx = dmaengine_submit(desc); - - } else { - if (port->rs485.flags & SER_RS485_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); - } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 52bbd27e93ae..701c085bb19b 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -946,8 +946,8 @@ static const struct input_device_id sysrq_ids[] = { { .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { BIT_MASK(KEY_LEFTALT) }, + .evbit = { [BIT_WORD(EV_KEY)] = BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_LEFTALT)] = BIT_MASK(KEY_LEFTALT) }, }, { }, }; |