diff options
| -rw-r--r-- | drivers/net/wireless/libertas/if_sdio.c | 277 |
1 files changed, 171 insertions, 106 deletions
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 387786e1b394..c962e21762dc 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -39,6 +39,7 @@ #include <linux/mmc/sdio_ids.h> #include <linux/mmc/sdio.h> #include <linux/mmc/host.h> +#include <linux/pm_runtime.h> #include "host.h" #include "decl.h" @@ -47,6 +48,8 @@ #include "cmd.h" #include "if_sdio.h" +static void if_sdio_interrupt(struct sdio_func *func); + /* The if_sdio_remove() callback function is called when * user removes this module from kernel space or ejects * the card from the slot. The driver handles these 2 cases @@ -757,6 +760,136 @@ out: return ret; } +/********************************************************************/ +/* Power management */ +/********************************************************************/ + +static int if_sdio_power_on(struct if_sdio_card *card) +{ + struct sdio_func *func = card->func; + struct lbs_private *priv = card->priv; + struct mmc_host *host = func->card->host; + int ret; + + sdio_claim_host(func); + + ret = sdio_enable_func(func); + if (ret) + goto release; + + /* For 1-bit transfers to the 8686 model, we need to enable the + * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 + * bit to allow access to non-vendor registers. */ + if ((card->model == MODEL_8686) && + (host->caps & MMC_CAP_SDIO_IRQ) && + (host->ios.bus_width == MMC_BUS_WIDTH_1)) { + u8 reg; + + func->card->quirks |= MMC_QUIRK_LENIENT_FN0; + reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret); + if (ret) + goto disable; + + reg |= SDIO_BUS_ECSI; + sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret); + if (ret) + goto disable; + } + + card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); + if (ret) + goto disable; + + card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8; + if (ret) + goto disable; + + card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16; + if (ret) + goto disable; + + sdio_release_host(func); + ret = if_sdio_prog_firmware(card); + sdio_claim_host(func); + if (ret) + goto disable; + + /* + * Get rx_unit if the chip is SD8688 or newer. + * SD8385 & SD8686 do not have rx_unit. + */ + if ((card->model != MODEL_8385) + && (card->model != MODEL_8686)) + card->rx_unit = if_sdio_read_rx_unit(card); + else + card->rx_unit = 0; + + /* + * Set up the interrupt handler late. + * + * If we set it up earlier, the (buggy) hardware generates a spurious + * interrupt, even before the interrupt has been enabled, with + * CCCR_INTx = 0. + * + * We register the interrupt handler late so that we can handle any + * spurious interrupts, and also to avoid generation of that known + * spurious interrupt in the first place. + */ + ret = sdio_claim_irq(func, if_sdio_interrupt); + if (ret) + goto disable; + + /* + * Enable interrupts now that everything is set up + */ + sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret); + if (ret) + goto release_irq; + + sdio_release_host(func); + + /* + * FUNC_INIT is required for SD8688 WLAN/BT multiple functions + */ + if (card->model == MODEL_8688) { + struct cmd_header cmd; + + memset(&cmd, 0, sizeof(cmd)); + + lbs_deb_sdio("send function INIT command\n"); + if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd), + lbs_cmd_copyback, (unsigned long) &cmd)) + netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n"); + } + + priv->fw_ready = 1; + + return 0; + +release_irq: + sdio_release_irq(func); +disable: + sdio_disable_func(func); +release: + sdio_release_host(func); + return ret; +} + +static int if_sdio_power_off(struct if_sdio_card *card) +{ + struct sdio_func *func = card->func; + struct lbs_private *priv = card->priv; + + priv->fw_ready = 0; + + sdio_claim_host(func); + sdio_release_irq(func); + sdio_disable_func(func); + sdio_release_host(func); + return 0; +} + + /*******************************************************************/ /* Libertas callbacks */ /*******************************************************************/ @@ -923,6 +1056,32 @@ static void if_sdio_reset_card(struct lbs_private *priv) schedule_work(&card_reset_work); } +static int if_sdio_power_save(struct lbs_private *priv) +{ + struct if_sdio_card *card = priv->card; + int ret; + + flush_workqueue(card->workqueue); + + ret = if_sdio_power_off(card); + + /* Let runtime PM know the card is powered off */ + pm_runtime_put_sync(&card->func->dev); + + return ret; +} + +static int if_sdio_power_restore(struct lbs_private *priv) +{ + struct if_sdio_card *card = priv->card; + + /* Make sure the card will not be powered off by runtime PM */ + pm_runtime_get_sync(&card->func->dev); + + return if_sdio_power_on(card); +} + + /*******************************************************************/ /* SDIO callbacks */ /*******************************************************************/ @@ -976,7 +1135,6 @@ static int if_sdio_probe(struct sdio_func *func, int ret, i; unsigned int model; struct if_sdio_packet *packet; - struct mmc_host *host = func->card->host; lbs_deb_enter(LBS_DEB_SDIO); @@ -1033,45 +1191,6 @@ static int if_sdio_probe(struct sdio_func *func, goto free; } - sdio_claim_host(func); - - ret = sdio_enable_func(func); - if (ret) - goto release; - - /* For 1-bit transfers to the 8686 model, we need to enable the - * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 - * bit to allow access to non-vendor registers. */ - if ((card->model == MODEL_8686) && - (host->caps & MMC_CAP_SDIO_IRQ) && - (host->ios.bus_width == MMC_BUS_WIDTH_1)) { - u8 reg; - - func->card->quirks |= MMC_QUIRK_LENIENT_FN0; - reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret); - if (ret) - goto release_int; - - reg |= SDIO_BUS_ECSI; - sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret); - if (ret) - goto release_int; - } - - card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); - if (ret) - goto release_int; - - card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8; - if (ret) - goto release_int; - - card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16; - if (ret) - goto release_int; - - sdio_release_host(func); - sdio_set_drvdata(func, card); lbs_deb_sdio("class = 0x%X, vendor = 0x%X, " @@ -1079,14 +1198,11 @@ static int if_sdio_probe(struct sdio_func *func, func->class, func->vendor, func->device, model, (unsigned)card->ioport); - ret = if_sdio_prog_firmware(card); - if (ret) - goto reclaim; priv = lbs_add_card(card, &func->dev); if (!priv) { ret = -ENOMEM; - goto reclaim; + goto free; } card->priv = priv; @@ -1097,62 +1213,21 @@ static int if_sdio_probe(struct sdio_func *func, priv->exit_deep_sleep = if_sdio_exit_deep_sleep; priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup; priv->reset_card = if_sdio_reset_card; + priv->power_save = if_sdio_power_save; + priv->power_restore = if_sdio_power_restore; - sdio_claim_host(func); - - /* - * Get rx_unit if the chip is SD8688 or newer. - * SD8385 & SD8686 do not have rx_unit. - */ - if ((card->model != MODEL_8385) - && (card->model != MODEL_8686)) - card->rx_unit = if_sdio_read_rx_unit(card); - else - card->rx_unit = 0; - - /* - * Set up the interrupt handler late. - * - * If we set it up earlier, the (buggy) hardware generates a spurious - * interrupt, even before the interrupt has been enabled, with - * CCCR_INTx = 0. - * - * We register the interrupt handler late so that we can handle any - * spurious interrupts, and also to avoid generation of that known - * spurious interrupt in the first place. - */ - ret = sdio_claim_irq(func, if_sdio_interrupt); - if (ret) - goto disable; - - /* - * Enable interrupts now that everything is set up - */ - sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret); - sdio_release_host(func); + ret = if_sdio_power_on(card); if (ret) - goto reclaim; - - priv->fw_ready = 1; - - /* - * FUNC_INIT is required for SD8688 WLAN/BT multiple functions - */ - if (card->model == MODEL_8688) { - struct cmd_header cmd; - - memset(&cmd, 0, sizeof(cmd)); - - lbs_deb_sdio("send function INIT command\n"); - if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd), - lbs_cmd_copyback, (unsigned long) &cmd)) - netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n"); - } + goto err_activate_card; ret = lbs_start_card(priv); + if_sdio_power_off(card); if (ret) goto err_activate_card; + /* Tell PM core that we don't need the card to be powered now */ + pm_runtime_put_noidle(&func->dev); + out: lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); @@ -1161,14 +1236,6 @@ out: err_activate_card: flush_workqueue(card->workqueue); lbs_remove_card(priv); -reclaim: - sdio_claim_host(func); -release_int: - sdio_release_irq(func); -disable: - sdio_disable_func(func); -release: - sdio_release_host(func); free: destroy_workqueue(card->workqueue); while (card->packets) { @@ -1195,6 +1262,9 @@ static void if_sdio_remove(struct sdio_func *func) card = sdio_get_drvdata(func); + /* Undo decrement done above in if_sdio_probe */ + pm_runtime_get_noresume(&func->dev); + if (user_rmmod && (card->model == MODEL_8688)) { /* * FUNC_SHUTDOWN is required for SD8688 WLAN/BT @@ -1219,11 +1289,6 @@ static void if_sdio_remove(struct sdio_func *func) flush_workqueue(card->workqueue); destroy_workqueue(card->workqueue); - sdio_claim_host(func); - sdio_release_irq(func); - sdio_disable_func(func); - sdio_release_host(func); - while (card->packets) { packet = card->packets; card->packets = card->packets->next; |