diff options
-rw-r--r-- | drivers/net/can/dev.c | 140 |
1 files changed, 85 insertions, 55 deletions
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 910c12e2638e..7188137fa08e 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -69,6 +69,7 @@ EXPORT_SYMBOL_GPL(can_len2dlc); #ifdef CONFIG_CAN_CALC_BITTIMING #define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */ +#define CAN_CALC_SYNC_SEG 1 /* * Bit-timing calculation derived from: @@ -83,98 +84,126 @@ EXPORT_SYMBOL_GPL(can_len2dlc); * registers of the CAN controller. You can find more information * in the header file linux/can/netlink.h. */ -static int can_update_spt(const struct can_bittiming_const *btc, - int sampl_pt, int tseg, int *tseg1, int *tseg2) +static int can_update_sample_point(const struct can_bittiming_const *btc, + unsigned int sample_point_nominal, unsigned int tseg, + unsigned int *tseg1_ptr, unsigned int *tseg2_ptr, + unsigned int *sample_point_error_ptr) { - *tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000; - if (*tseg2 < btc->tseg2_min) - *tseg2 = btc->tseg2_min; - if (*tseg2 > btc->tseg2_max) - *tseg2 = btc->tseg2_max; - *tseg1 = tseg - *tseg2; - if (*tseg1 > btc->tseg1_max) { - *tseg1 = btc->tseg1_max; - *tseg2 = tseg - *tseg1; + unsigned int sample_point_error, best_sample_point_error = UINT_MAX; + unsigned int sample_point, best_sample_point = 0; + unsigned int tseg1, tseg2; + int i; + + for (i = 0; i <= 1; i++) { + tseg2 = tseg + CAN_CALC_SYNC_SEG - (sample_point_nominal * (tseg + CAN_CALC_SYNC_SEG)) / 1000 - i; + tseg2 = clamp(tseg2, btc->tseg2_min, btc->tseg2_max); + tseg1 = tseg - tseg2; + if (tseg1 > btc->tseg1_max) { + tseg1 = btc->tseg1_max; + tseg2 = tseg - tseg1; + } + + sample_point = 1000 * (tseg + CAN_CALC_SYNC_SEG - tseg2) / (tseg + CAN_CALC_SYNC_SEG); + sample_point_error = abs(sample_point_nominal - sample_point); + + if ((sample_point <= sample_point_nominal) && (sample_point_error < best_sample_point_error)) { + best_sample_point = sample_point; + best_sample_point_error = sample_point_error; + *tseg1_ptr = tseg1; + *tseg2_ptr = tseg2; + } } - return 1000 * (tseg + 1 - *tseg2) / (tseg + 1); + + if (sample_point_error_ptr) + *sample_point_error_ptr = best_sample_point_error; + + return best_sample_point; } static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, const struct can_bittiming_const *btc) { struct can_priv *priv = netdev_priv(dev); - long best_error = 1000000000, error = 0; - int best_tseg = 0, best_brp = 0, brp = 0; - int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0; - int spt_error = 1000, spt = 0, sampl_pt; - long rate; + unsigned int bitrate; /* current bitrate */ + unsigned int bitrate_error; /* difference between current and nominal value */ + unsigned int best_bitrate_error = UINT_MAX; + unsigned int sample_point_error; /* difference between current and nominal value */ + unsigned int best_sample_point_error = UINT_MAX; + unsigned int sample_point_nominal; /* nominal sample point */ + unsigned int best_tseg = 0; /* current best value for tseg */ + unsigned int best_brp = 0; /* current best value for brp */ + unsigned int brp, tsegall, tseg, tseg1 = 0, tseg2 = 0; u64 v64; /* Use CiA recommended sample points */ if (bt->sample_point) { - sampl_pt = bt->sample_point; + sample_point_nominal = bt->sample_point; } else { if (bt->bitrate > 800000) - sampl_pt = 750; + sample_point_nominal = 750; else if (bt->bitrate > 500000) - sampl_pt = 800; + sample_point_nominal = 800; else - sampl_pt = 875; + sample_point_nominal = 875; } /* tseg even = round down, odd = round up */ for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1; tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) { - tsegall = 1 + tseg / 2; + tsegall = CAN_CALC_SYNC_SEG + tseg / 2; + /* Compute all possible tseg choices (tseg=tseg1+tseg2) */ brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2; - /* chose brp step which is possible in system */ + + /* choose brp step which is possible in system */ brp = (brp / btc->brp_inc) * btc->brp_inc; if ((brp < btc->brp_min) || (brp > btc->brp_max)) continue; - rate = priv->clock.freq / (brp * tsegall); - error = bt->bitrate - rate; + + bitrate = priv->clock.freq / (brp * tsegall); + bitrate_error = abs(bt->bitrate - bitrate); + /* tseg brp biterror */ - if (error < 0) - error = -error; - if (error > best_error) + if (bitrate_error > best_bitrate_error) continue; - best_error = error; - if (error == 0) { - spt = can_update_spt(btc, sampl_pt, tseg / 2, - &tseg1, &tseg2); - error = sampl_pt - spt; - if (error < 0) - error = -error; - if (error > spt_error) - continue; - spt_error = error; - } + + /* reset sample point error if we have a better bitrate */ + if (bitrate_error < best_bitrate_error) + best_sample_point_error = UINT_MAX; + + can_update_sample_point(btc, sample_point_nominal, tseg / 2, &tseg1, &tseg2, &sample_point_error); + if (sample_point_error > best_sample_point_error) + continue; + + best_sample_point_error = sample_point_error; + best_bitrate_error = bitrate_error; best_tseg = tseg / 2; best_brp = brp; - if (error == 0) + + if (bitrate_error == 0 && sample_point_error == 0) break; } - if (best_error) { + if (best_bitrate_error) { /* Error in one-tenth of a percent */ - error = (best_error * 1000) / bt->bitrate; - if (error > CAN_CALC_MAX_ERROR) { + v64 = (u64)best_bitrate_error * 1000; + do_div(v64, bt->bitrate); + bitrate_error = (u32)v64; + if (bitrate_error > CAN_CALC_MAX_ERROR) { netdev_err(dev, - "bitrate error %ld.%ld%% too high\n", - error / 10, error % 10); + "bitrate error %d.%d%% too high\n", + bitrate_error / 10, bitrate_error % 10); return -EDOM; - } else { - netdev_warn(dev, "bitrate error %ld.%ld%%\n", - error / 10, error % 10); } + netdev_warn(dev, "bitrate error %d.%d%%\n", + bitrate_error / 10, bitrate_error % 10); } /* real sample point */ - bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg, - &tseg1, &tseg2); + bt->sample_point = can_update_sample_point(btc, sample_point_nominal, best_tseg, + &tseg1, &tseg2, NULL); - v64 = (u64)best_brp * 1000000000UL; + v64 = (u64)best_brp * 1000 * 1000 * 1000; do_div(v64, priv->clock.freq); bt->tq = (u32)v64; bt->prop_seg = tseg1 / 2; @@ -182,9 +211,9 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, bt->phase_seg2 = tseg2; /* check for sjw user settings */ - if (!bt->sjw || !btc->sjw_max) + if (!bt->sjw || !btc->sjw_max) { bt->sjw = 1; - else { + } else { /* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */ if (bt->sjw > btc->sjw_max) bt->sjw = btc->sjw_max; @@ -194,8 +223,9 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt, } bt->brp = best_brp; - /* real bit-rate */ - bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1)); + + /* real bitrate */ + bt->bitrate = priv->clock.freq / (bt->brp * (CAN_CALC_SYNC_SEG + tseg1 + tseg2)); return 0; } |