diff options
-rw-r--r-- | drivers/net/phy/mscc.c | 194 |
1 files changed, 188 insertions, 6 deletions
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index 805cda3465d7..aadee8db0ff8 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -252,13 +252,21 @@ enum rgmii_rx_clock_delay { #define MSCC_PHY_TR_LSB 17 #define MSCC_PHY_TR_MSB 18 -/* Microsemi PHY ID's */ +/* Microsemi PHY ID's + * Code assumes lowest nibble is 0 + */ +#define PHY_ID_VSC8504 0x000704c0 #define PHY_ID_VSC8514 0x00070670 #define PHY_ID_VSC8530 0x00070560 #define PHY_ID_VSC8531 0x00070570 #define PHY_ID_VSC8540 0x00070760 #define PHY_ID_VSC8541 0x00070770 +#define PHY_ID_VSC8552 0x000704e0 +#define PHY_ID_VSC856X 0x000707e0 +#define PHY_ID_VSC8572 0x000704d0 #define PHY_ID_VSC8574 0x000704a0 +#define PHY_ID_VSC8575 0x000707d0 +#define PHY_ID_VSC8582 0x000707b0 #define PHY_ID_VSC8584 0x000707c0 #define MSCC_VDDMAC_1500 1500 @@ -1595,6 +1603,9 @@ static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed) else addr = vsc8531->base_addr + i; + if (!map[addr]) + continue; + phy = container_of(map[addr], struct phy_device, mdio); if ((phy->phy_id & phydev->drv->phy_id_mask) != @@ -1647,14 +1658,29 @@ static int vsc8584_config_init(struct phy_device *phydev) * in this pre-init function. */ if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0)) { - if ((phydev->phy_id & phydev->drv->phy_id_mask) == - (PHY_ID_VSC8574 & phydev->drv->phy_id_mask)) + /* The following switch statement assumes that the lowest + * nibble of the phy_id_mask is always 0. This works because + * the lowest nibble of the PHY_ID's below are also 0. + */ + WARN_ON(phydev->drv->phy_id_mask & 0xf); + + switch (phydev->phy_id & phydev->drv->phy_id_mask) { + case PHY_ID_VSC8504: + case PHY_ID_VSC8552: + case PHY_ID_VSC8572: + case PHY_ID_VSC8574: ret = vsc8574_config_pre_init(phydev); - else if ((phydev->phy_id & phydev->drv->phy_id_mask) == - (PHY_ID_VSC8584 & phydev->drv->phy_id_mask)) + break; + case PHY_ID_VSC856X: + case PHY_ID_VSC8575: + case PHY_ID_VSC8582: + case PHY_ID_VSC8584: ret = vsc8584_config_pre_init(phydev); - else + break; + default: ret = -EINVAL; + break; + }; if (ret) goto err; @@ -2322,6 +2348,32 @@ static int vsc85xx_probe(struct phy_device *phydev) /* Microsemi VSC85xx PHYs */ static struct phy_driver vsc85xx_driver[] = { { + .phy_id = PHY_ID_VSC8504, + .name = "Microsemi GE VSC8504 SyncE", + .phy_id_mask = 0xfffffff0, + /* PHY_GBIT_FEATURES */ + .soft_reset = &genphy_soft_reset, + .config_init = &vsc8584_config_init, + .config_aneg = &vsc85xx_config_aneg, + .aneg_done = &genphy_aneg_done, + .read_status = &vsc85xx_read_status, + .ack_interrupt = &vsc85xx_ack_interrupt, + .config_intr = &vsc85xx_config_intr, + .did_interrupt = &vsc8584_did_interrupt, + .suspend = &genphy_suspend, + .resume = &genphy_resume, + .probe = &vsc8574_probe, + .set_wol = &vsc85xx_wol_set, + .get_wol = &vsc85xx_wol_get, + .get_tunable = &vsc85xx_get_tunable, + .set_tunable = &vsc85xx_set_tunable, + .read_page = &vsc85xx_phy_read_page, + .write_page = &vsc85xx_phy_write_page, + .get_sset_count = &vsc85xx_get_sset_count, + .get_strings = &vsc85xx_get_strings, + .get_stats = &vsc85xx_get_stats, +}, +{ .phy_id = PHY_ID_VSC8514, .name = "Microsemi GE VSC8514 SyncE", .phy_id_mask = 0xfffffff0, @@ -2445,6 +2497,82 @@ static struct phy_driver vsc85xx_driver[] = { .get_stats = &vsc85xx_get_stats, }, { + .phy_id = PHY_ID_VSC8552, + .name = "Microsemi GE VSC8552 SyncE", + .phy_id_mask = 0xfffffff0, + /* PHY_GBIT_FEATURES */ + .soft_reset = &genphy_soft_reset, + .config_init = &vsc8584_config_init, + .config_aneg = &vsc85xx_config_aneg, + .aneg_done = &genphy_aneg_done, + .read_status = &vsc85xx_read_status, + .ack_interrupt = &vsc85xx_ack_interrupt, + .config_intr = &vsc85xx_config_intr, + .did_interrupt = &vsc8584_did_interrupt, + .suspend = &genphy_suspend, + .resume = &genphy_resume, + .probe = &vsc8574_probe, + .set_wol = &vsc85xx_wol_set, + .get_wol = &vsc85xx_wol_get, + .get_tunable = &vsc85xx_get_tunable, + .set_tunable = &vsc85xx_set_tunable, + .read_page = &vsc85xx_phy_read_page, + .write_page = &vsc85xx_phy_write_page, + .get_sset_count = &vsc85xx_get_sset_count, + .get_strings = &vsc85xx_get_strings, + .get_stats = &vsc85xx_get_stats, +}, +{ + .phy_id = PHY_ID_VSC856X, + .name = "Microsemi GE VSC856X SyncE", + .phy_id_mask = 0xfffffff0, + /* PHY_GBIT_FEATURES */ + .soft_reset = &genphy_soft_reset, + .config_init = &vsc8584_config_init, + .config_aneg = &vsc85xx_config_aneg, + .aneg_done = &genphy_aneg_done, + .read_status = &vsc85xx_read_status, + .ack_interrupt = &vsc85xx_ack_interrupt, + .config_intr = &vsc85xx_config_intr, + .did_interrupt = &vsc8584_did_interrupt, + .suspend = &genphy_suspend, + .resume = &genphy_resume, + .probe = &vsc8584_probe, + .get_tunable = &vsc85xx_get_tunable, + .set_tunable = &vsc85xx_set_tunable, + .read_page = &vsc85xx_phy_read_page, + .write_page = &vsc85xx_phy_write_page, + .get_sset_count = &vsc85xx_get_sset_count, + .get_strings = &vsc85xx_get_strings, + .get_stats = &vsc85xx_get_stats, +}, +{ + .phy_id = PHY_ID_VSC8572, + .name = "Microsemi GE VSC8572 SyncE", + .phy_id_mask = 0xfffffff0, + /* PHY_GBIT_FEATURES */ + .soft_reset = &genphy_soft_reset, + .config_init = &vsc8584_config_init, + .config_aneg = &vsc85xx_config_aneg, + .aneg_done = &genphy_aneg_done, + .read_status = &vsc85xx_read_status, + .ack_interrupt = &vsc85xx_ack_interrupt, + .config_intr = &vsc85xx_config_intr, + .did_interrupt = &vsc8584_did_interrupt, + .suspend = &genphy_suspend, + .resume = &genphy_resume, + .probe = &vsc8574_probe, + .set_wol = &vsc85xx_wol_set, + .get_wol = &vsc85xx_wol_get, + .get_tunable = &vsc85xx_get_tunable, + .set_tunable = &vsc85xx_set_tunable, + .read_page = &vsc85xx_phy_read_page, + .write_page = &vsc85xx_phy_write_page, + .get_sset_count = &vsc85xx_get_sset_count, + .get_strings = &vsc85xx_get_strings, + .get_stats = &vsc85xx_get_stats, +}, +{ .phy_id = PHY_ID_VSC8574, .name = "Microsemi GE VSC8574 SyncE", .phy_id_mask = 0xfffffff0, @@ -2471,6 +2599,54 @@ static struct phy_driver vsc85xx_driver[] = { .get_stats = &vsc85xx_get_stats, }, { + .phy_id = PHY_ID_VSC8575, + .name = "Microsemi GE VSC8575 SyncE", + .phy_id_mask = 0xfffffff0, + /* PHY_GBIT_FEATURES */ + .soft_reset = &genphy_soft_reset, + .config_init = &vsc8584_config_init, + .config_aneg = &vsc85xx_config_aneg, + .aneg_done = &genphy_aneg_done, + .read_status = &vsc85xx_read_status, + .ack_interrupt = &vsc85xx_ack_interrupt, + .config_intr = &vsc85xx_config_intr, + .did_interrupt = &vsc8584_did_interrupt, + .suspend = &genphy_suspend, + .resume = &genphy_resume, + .probe = &vsc8584_probe, + .get_tunable = &vsc85xx_get_tunable, + .set_tunable = &vsc85xx_set_tunable, + .read_page = &vsc85xx_phy_read_page, + .write_page = &vsc85xx_phy_write_page, + .get_sset_count = &vsc85xx_get_sset_count, + .get_strings = &vsc85xx_get_strings, + .get_stats = &vsc85xx_get_stats, +}, +{ + .phy_id = PHY_ID_VSC8582, + .name = "Microsemi GE VSC8582 SyncE", + .phy_id_mask = 0xfffffff0, + /* PHY_GBIT_FEATURES */ + .soft_reset = &genphy_soft_reset, + .config_init = &vsc8584_config_init, + .config_aneg = &vsc85xx_config_aneg, + .aneg_done = &genphy_aneg_done, + .read_status = &vsc85xx_read_status, + .ack_interrupt = &vsc85xx_ack_interrupt, + .config_intr = &vsc85xx_config_intr, + .did_interrupt = &vsc8584_did_interrupt, + .suspend = &genphy_suspend, + .resume = &genphy_resume, + .probe = &vsc8584_probe, + .get_tunable = &vsc85xx_get_tunable, + .set_tunable = &vsc85xx_set_tunable, + .read_page = &vsc85xx_phy_read_page, + .write_page = &vsc85xx_phy_write_page, + .get_sset_count = &vsc85xx_get_sset_count, + .get_strings = &vsc85xx_get_strings, + .get_stats = &vsc85xx_get_stats, +}, +{ .phy_id = PHY_ID_VSC8584, .name = "Microsemi GE VSC8584 SyncE", .phy_id_mask = 0xfffffff0, @@ -2500,12 +2676,18 @@ static struct phy_driver vsc85xx_driver[] = { module_phy_driver(vsc85xx_driver); static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = { + { PHY_ID_VSC8504, 0xfffffff0, }, { PHY_ID_VSC8514, 0xfffffff0, }, { PHY_ID_VSC8530, 0xfffffff0, }, { PHY_ID_VSC8531, 0xfffffff0, }, { PHY_ID_VSC8540, 0xfffffff0, }, { PHY_ID_VSC8541, 0xfffffff0, }, + { PHY_ID_VSC8552, 0xfffffff0, }, + { PHY_ID_VSC856X, 0xfffffff0, }, + { PHY_ID_VSC8572, 0xfffffff0, }, { PHY_ID_VSC8574, 0xfffffff0, }, + { PHY_ID_VSC8575, 0xfffffff0, }, + { PHY_ID_VSC8582, 0xfffffff0, }, { PHY_ID_VSC8584, 0xfffffff0, }, { } }; |