summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/cris/include/asm/ioctls.h5
-rw-r--r--arch/cris/include/asm/rs485.h8
-rw-r--r--arch/cris/include/asm/termios.h1
-rw-r--r--drivers/serial/crisv10.c79
-rw-r--r--drivers/serial/crisv10.h2
5 files changed, 66 insertions, 29 deletions
diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h
index 4f4e52531fa0..35bbc181598a 100644
--- a/arch/cris/include/asm/ioctls.h
+++ b/arch/cris/include/asm/ioctls.h
@@ -74,8 +74,9 @@
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
-#define TIOCSERSETRS485 0x5461 /* enable rs-485 */
-#define TIOCSERWRRS485 0x5462 /* write rs-485 */
+#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
+#define TIOCSERWRRS485 0x5462 /* write rs-485 */
+#define TIOCSRS485 0x5463 /* enable rs-485 */
/* Used for packet mode */
#define TIOCPKT_DATA 0
diff --git a/arch/cris/include/asm/rs485.h b/arch/cris/include/asm/rs485.h
index c331c51b0c2b..ad40f9fbcb8a 100644
--- a/arch/cris/include/asm/rs485.h
+++ b/arch/cris/include/asm/rs485.h
@@ -1,15 +1,13 @@
/* RS-485 structures */
-/* RS-485 support */
-/* Used with ioctl() TIOCSERSETRS485 */
+/* Used with ioctl() TIOCSERSETRS485 for backward compatibility!
+ * XXX: Do not use it for new code!
+ */
struct rs485_control {
unsigned short rts_on_send;
unsigned short rts_after_sent;
unsigned long delay_rts_before_send;
unsigned short enabled;
-#ifdef __KERNEL__
- int disable_serial_loopback;
-#endif
};
/* Used with ioctl() TIOCSERWRRS485 */
diff --git a/arch/cris/include/asm/termios.h b/arch/cris/include/asm/termios.h
index b0124e6c2e41..1265109f4ce3 100644
--- a/arch/cris/include/asm/termios.h
+++ b/arch/cris/include/asm/termios.h
@@ -4,6 +4,7 @@
#include <asm/termbits.h>
#include <asm/ioctls.h>
#include <asm/rs485.h>
+#include <linux/serial.h>
struct winsize {
unsigned short ws_row;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index e642c22c80e2..7ba7d70f04d6 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1391,7 +1391,7 @@ static inline void e100_disable_rx_irq(struct e100_serial *info)
#if defined(CONFIG_ETRAX_RS485)
/* Enable RS-485 mode on selected port. This is UGLY. */
static int
-e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
+e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
{
struct e100_serial * info = (struct e100_serial *)tty->driver_data;
@@ -1409,13 +1409,11 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
#endif
- info->rs485.rts_on_send = 0x01 & r->rts_on_send;
- info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
+ info->rs485.flags = r->flags;
if (r->delay_rts_before_send >= 1000)
info->rs485.delay_rts_before_send = 1000;
else
info->rs485.delay_rts_before_send = r->delay_rts_before_send;
- info->rs485.enabled = r->enabled;
/* printk("rts: on send = %i, after = %i, enabled = %i",
info->rs485.rts_on_send,
info->rs485.rts_after_sent,
@@ -1430,17 +1428,18 @@ e100_write_rs485(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct e100_serial * info = (struct e100_serial *)tty->driver_data;
- int old_enabled = info->rs485.enabled;
+ int old_value = (info->rs485.flags) & SER_RS485_ENABLED;
/* rs485 is always implicitly enabled if we're using the ioctl()
- * but it doesn't have to be set in the rs485_control
+ * but it doesn't have to be set in the serial_rs485
* (to be backward compatible with old apps)
* So we store, set and restore it.
*/
- info->rs485.enabled = 1;
+ info->rs485.flags |= SER_RS485_ENABLED;
/* rs_write now deals with RS485 if enabled */
count = rs_write(tty, buf, count);
- info->rs485.enabled = old_enabled;
+ if (!old_value)
+ info->rs485.flags &= ~(SER_RS485_ENABLED);
return count;
}
@@ -1451,7 +1450,7 @@ static void rs485_toggle_rts_timer_function(unsigned long data)
struct e100_serial *info = (struct e100_serial *)data;
fast_timers_rs485[info->line].function = NULL;
- e100_rts(info, info->rs485.rts_after_sent);
+ e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
e100_enable_rx(info);
e100_enable_rx_irq(info);
@@ -1647,7 +1646,7 @@ transmit_chars_dma(struct e100_serial *info)
info->tr_running = 0;
#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
- if (info->rs485.enabled) {
+ if (info->rs485.flags & SER_RS485_ENABLED) {
/* Set a short timer to toggle RTS */
start_one_shot_timer(&fast_timers_rs485[info->line],
rs485_toggle_rts_timer_function,
@@ -2577,7 +2576,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
info->icount.tx++;
if (info->xmit.head == info->xmit.tail) {
#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
- if (info->rs485.enabled) {
+ if (info->rs485.flags & SER_RS485_ENABLED) {
/* Set a short timer to toggle RTS */
start_one_shot_timer(&fast_timers_rs485[info->line],
rs485_toggle_rts_timer_function,
@@ -3218,7 +3217,7 @@ rs_write(struct tty_struct *tty,
#if defined(CONFIG_ETRAX_RS485)
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
- if (info->rs485.enabled)
+ if (info->rs485.flags & SER_RS485_ENABLED)
{
/* If we are in RS-485 mode, we need to toggle RTS and disable
* the receiver before initiating a DMA transfer
@@ -3228,7 +3227,7 @@ rs_write(struct tty_struct *tty,
fast_timers_rs485[info->line].function = NULL;
del_fast_timer(&fast_timers_rs485[info->line]);
#endif
- e100_rts(info, info->rs485.rts_on_send);
+ e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));
#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
e100_disable_rx(info);
e100_enable_rx_irq(info);
@@ -3242,7 +3241,7 @@ rs_write(struct tty_struct *tty,
count = rs_raw_write(tty, buf, count);
#if defined(CONFIG_ETRAX_RS485)
- if (info->rs485.enabled)
+ if (info->rs485.flags & SER_RS485_ENABLED)
{
unsigned int val;
/* If we are in RS-485 mode the following has to be done:
@@ -3263,7 +3262,7 @@ rs_write(struct tty_struct *tty,
get_lsr_info(info, &val);
}while (!(val & TIOCSER_TEMT));
- e100_rts(info, info->rs485.rts_after_sent);
+ e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
e100_enable_rx(info);
@@ -3678,14 +3677,52 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
#if defined(CONFIG_ETRAX_RS485)
case TIOCSERSETRS485:
{
+ /* In this ioctl we still use the old structure
+ * rs485_control for backward compatibility
+ * (if we use serial_rs485, then old user-level code
+ * wouldn't work anymore...).
+ * The use of this ioctl is deprecated: use TIOCSRS485
+ * instead.*/
struct rs485_control rs485ctrl;
+ struct serial_rs485 rs485data;
+ printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");
if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
sizeof(rs485ctrl)))
return -EFAULT;
- return e100_enable_rs485(tty, &rs485ctrl);
+ rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
+ rs485data.flags = 0;
+ if (rs485ctrl.enabled)
+ rs485data.flags |= SER_RS485_ENABLED;
+ else
+ rs485data.flags &= ~(SER_RS485_ENABLED);
+
+ if (rs485ctrl.rts_on_send)
+ rs485data.flags |= SER_RS485_RTS_ON_SEND;
+ else
+ rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+ if (rs485ctrl.rts_after_sent)
+ rs485data.flags |= SER_RS485_RTS_AFTER_SEND;
+ else
+ rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
+ return e100_enable_rs485(tty, &rs485data);
}
+ case TIOCSRS485:
+ {
+ /* This is the new version of TIOCSRS485, with new
+ * data structure serial_rs485 */
+ struct serial_rs485 rs485data;
+ if (copy_from_user(&rs485data, (struct rs485_control *)arg,
+ sizeof(rs485data)))
+ return -EFAULT;
+
+ return e100_enable_rs485(tty, &rs485data);
+ }
+
+
case TIOCSERWRRS485:
{
struct rs485_write rs485wr;
@@ -3827,8 +3864,8 @@ rs_close(struct tty_struct *tty, struct file * filp)
/* port closed */
#if defined(CONFIG_ETRAX_RS485)
- if (info->rs485.enabled) {
- info->rs485.enabled = 0;
+ if (info->rs485.flags & SER_RS485_ENABLED) {
+ info->rs485.flags &= ~(SER_RS485_ENABLED);
#if defined(CONFIG_ETRAX_RS485_ON_PA)
*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
#endif
@@ -4493,10 +4530,10 @@ rs_init(void)
#if defined(CONFIG_ETRAX_RS485)
/* Set sane defaults */
- info->rs485.rts_on_send = 0;
- info->rs485.rts_after_sent = 1;
+ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
+ info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
info->rs485.delay_rts_before_send = 0;
- info->rs485.enabled = 0;
+ info->rs485.flags &= ~(SER_RS485_ENABLED);
#endif
INIT_WORK(&info->work, do_softint);
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
index f36a729280bc..ea0beb46a10d 100644
--- a/drivers/serial/crisv10.h
+++ b/drivers/serial/crisv10.h
@@ -125,7 +125,7 @@ struct e100_serial {
int errorcode;
#ifdef CONFIG_ETRAX_RS485
- struct rs485_control rs485; /* RS-485 support */
+ struct serial_rs485 rs485; /* RS-485 support */
#endif
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 13:28:05 +0000