diff options
| -rw-r--r-- | Documentation/usb/usbmon.txt | 152 | ||||
| -rw-r--r-- | drivers/usb/mon/Makefile | 2 | ||||
| -rw-r--r-- | drivers/usb/mon/mon_bin.c | 1172 | ||||
| -rw-r--r-- | drivers/usb/mon/mon_dma.c | 39 | ||||
| -rw-r--r-- | drivers/usb/mon/mon_main.c | 97 | ||||
| -rw-r--r-- | drivers/usb/mon/mon_text.c | 67 | ||||
| -rw-r--r-- | drivers/usb/mon/usb_mon.h | 30 |
7 files changed, 1502 insertions, 57 deletions
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index e65ec828d7aa..0f6808abd612 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -77,7 +77,7 @@ that the file size is not excessive for your favourite editor. The '1t' type data consists of a stream of events, such as URB submission, URB callback, submission error. Every event is a text line, which consists -of whitespace separated words. The number of position of words may depend +of whitespace separated words. The number or position of words may depend on the event type, but there is a set of words, common for all types. Here is the list of words, from left to right: @@ -170,4 +170,152 @@ dd65f0e8 4128379808 C Bo:005:02 0 31 > * Raw binary format and API -TBD +The overall architecture of the API is about the same as the one above, +only the events are delivered in binary format. Each event is sent in +the following structure (its name is made up, so that we can refer to it): + +struct usbmon_packet { + u64 id; /* 0: URB ID - from submission to callback */ + unsigned char type; /* 8: Same as text; extensible. */ + unsigned char xfer_type; /* ISO (0), Intr, Control, Bulk (3) */ + unsigned char epnum; /* Endpoint number and transfer direction */ + unsigned char devnum; /* Device address */ + u16 busnum; /* 12: Bus number */ + char flag_setup; /* 14: Same as text */ + char flag_data; /* 15: Same as text; Binary zero is OK. */ + s64 ts_sec; /* 16: gettimeofday */ + s32 ts_usec; /* 24: gettimeofday */ + int status; /* 28: */ + unsigned int length; /* 32: Length of data (submitted or actual) */ + unsigned int len_cap; /* 36: Delivered length */ + unsigned char setup[8]; /* 40: Only for Control 'S' */ +}; /* 48 bytes total */ + +These events can be received from a character device by reading with read(2), +with an ioctl(2), or by accessing the buffer with mmap. + +The character device is usually called /dev/usbmonN, where N is the USB bus +number. Number zero (/dev/usbmon0) is special and means "all buses". +However, this feature is not implemented yet. Note that specific naming +policy is set by your Linux distribution. + +If you create /dev/usbmon0 by hand, make sure that it is owned by root +and has mode 0600. Otherwise, unpriviledged users will be able to snoop +keyboard traffic. + +The following ioctl calls are available, with MON_IOC_MAGIC 0x92: + + MON_IOCQ_URB_LEN, defined as _IO(MON_IOC_MAGIC, 1) + +This call returns the length of data in the next event. Note that majority of +events contain no data, so if this call returns zero, it does not mean that +no events are available. + + MON_IOCG_STATS, defined as _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats) + +The argument is a pointer to the following structure: + +struct mon_bin_stats { + u32 queued; + u32 dropped; +}; + +The member "queued" refers to the number of events currently queued in the +buffer (and not to the number of events processed since the last reset). + +The member "dropped" is the number of events lost since the last call +to MON_IOCG_STATS. + + MON_IOCT_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 4) + +This call sets the buffer size. The argument is the size in bytes. +The size may be rounded down to the next chunk (or page). If the requested +size is out of [unspecified] bounds for this kernel, the call fails with +-EINVAL. + + MON_IOCQ_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 5) + +This call returns the current size of the buffer in bytes. + + MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg) + +This call waits for events to arrive if none were in the kernel buffer, +then returns the first event. Its argument is a pointer to the following +structure: + +struct mon_get_arg { + struct usbmon_packet *hdr; + void *data; + size_t alloc; /* Length of data (can be zero) */ +}; + +Before the call, hdr, data, and alloc should be filled. Upon return, the area +pointed by hdr contains the next event structure, and the data buffer contains +the data, if any. The event is removed from the kernel buffer. + + MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg) + +This ioctl is primarily used when the application accesses the buffer +with mmap(2). Its argument is a pointer to the following structure: + +struct mon_mfetch_arg { + uint32_t *offvec; /* Vector of events fetched */ + uint32_t nfetch; /* Number of events to fetch (out: fetched) */ + uint32_t nflush; /* Number of events to flush */ +}; + +The ioctl operates in 3 stages. + +First, it removes and discards up to nflush events from the kernel buffer. +The actual number of events discarded is returned in nflush. + +Second, it waits for an event to be present in the buffer, unless the pseudo- +device is open with O_NONBLOCK. + +Third, it extracts up to nfetch offsets into the mmap buffer, and stores +them into the offvec. The actual number of event offsets is stored into +the nfetch. + + MON_IOCH_MFLUSH, defined as _IO(MON_IOC_MAGIC, 8) + +This call removes a number of events from the kernel buffer. Its argument +is the number of events to remove. If the buffer contains fewer events +than requested, all events present are removed, and no error is reported. +This works when no events are available too. + + FIONBIO + +The ioctl FIONBIO may be implemented in the future, if there's a need. + +In addition to ioctl(2) and read(2), the special file of binary API can +be polled with select(2) and poll(2). But lseek(2) does not work. + +* Memory-mapped access of the kernel buffer for the binary API + +The basic idea is simple: + +To prepare, map the buffer by getting the current size, then using mmap(2). +Then, execute a loop similar to the one written in pseudo-code below: + + struct mon_mfetch_arg fetch; + struct usbmon_packet *hdr; + int nflush = 0; + for (;;) { + fetch.offvec = vec; // Has N 32-bit words + fetch.nfetch = N; // Or less than N + fetch.nflush = nflush; + ioctl(fd, MON_IOCX_MFETCH, &fetch); // Process errors, too + nflush = fetch.nfetch; // This many packets to flush when done + for (i = 0; i < nflush; i++) { + hdr = (struct ubsmon_packet *) &mmap_area[vec[i]]; + if (hdr->type == '@') // Filler packet + continue; + caddr_t data = &mmap_area[vec[i]] + 64; + process_packet(hdr, data); + } + } + +Thus, the main idea is to execute only one ioctl per N events. + +Although the buffer is circular, the returned headers and data do not cross +the end of the buffer, so the above pseudo-code does not need any gathering. diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile index 3cf3ea3a88ed..90c59535778d 100644 --- a/drivers/usb/mon/Makefile +++ b/drivers/usb/mon/Makefile @@ -2,7 +2,7 @@ # Makefile for USB Core files and filesystem # -usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_dma.o +usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o mon_dma.o # This does not use CONFIG_USB_MON because we want this to use a tristate. obj-$(CONFIG_USB) += usbmon.o diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c new file mode 100644 index 000000000000..c01dfe603672 --- /dev/null +++ b/drivers/usb/mon/mon_bin.c @@ -0,0 +1,1172 @@ +/* + * The USB Monitor, inspired by Dave Harding's USBMon. + * + * This is a binary format reader. + * + * Copyright (C) 2006 Paolo Abeni (paolo.abeni@email.it) + * Copyright (C) 2006 Pete Zaitcev (zaitcev@redhat.com) + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/usb.h> +#include <linux/poll.h> +#include <linux/compat.h> +#include <linux/mm.h> + +#include <asm/uaccess.h> + +#include "usb_mon.h" + +/* + * Defined by USB 2.0 clause 9.3, table 9.2. + */ +#define SETUP_LEN 8 + +/* ioctl macros */ +#define MON_IOC_MAGIC 0x92 + +#define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1) +/* #2 used to be MON_IOCX_URB, removed before it got into Linus tree */ +#define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats) +#define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4) +#define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5) +#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) +#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) +#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) +#ifdef CONFIG_COMPAT +#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) +#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) +#endif + +/* + * Some architectures have enormous basic pages (16KB for ia64, 64KB for ppc). + * But it's all right. Just use a simple way to make sure the chunk is never + * smaller than a page. + * + * N.B. An application does not know our chunk size. + * + * Woops, get_zeroed_page() returns a single page. I guess we're stuck with + * page-sized chunks for the time being. + */ +#define CHUNK_SIZE PAGE_SIZE +#define CHUNK_ALIGN(x) (((x)+CHUNK_SIZE-1) & ~(CHUNK_SIZE-1)) + +/* + * The magic limit was calculated so that it allows the monitoring + * application to pick data once in two ticks. This way, another application, + * which presumably drives the bus, gets to hog CPU, yet we collect our data. + * If HZ is 100, a 480 mbit/s bus drives 614 KB every jiffy. USB has an + * enormous overhead built into the bus protocol, so we need about 1000 KB. + * + * This is still too much for most cases, where we just snoop a few + * descriptor fetches for enumeration. So, the default is a "reasonable" + * amount for systems with HZ=250 and incomplete bus saturation. + * + * XXX What about multi-megabyte URBs which take minutes to transfer? + */ +#define BUFF_MAX CHUNK_ALIGN(1200*1024) +#define BUFF_DFL CHUNK_ALIGN(300*1024) +#define BUFF_MIN CHUNK_ALIGN(8*1024) + +/* + * The per-event API header (2 per URB). + * + * This structure is seen in userland as defined by the documentation. + */ +struct mon_bin_hdr { + u64 id; /* URB ID - from submission to callback */ + unsigned char type; /* Same as in text API; extensible. */ + unsigned char xfer_type; /* ISO, Intr, Control, Bulk */ + unsigned char epnum; /* Endpoint number and transfer direction */ + unsigned char devnum; /* Device address */ + unsigned short busnum; /* Bus number */ + char flag_setup; + char flag_data; + s64 ts_sec; /* gettimeofday */ + s32 ts_usec; /* gettimeofday */ + int status; + unsigned int len_urb; /* Length of data (submitted or actual) */ + unsigned int len_cap; /* Delivered length */ + unsigned char setup[SETUP_LEN]; /* Only for Control S-type */ +}; + +/* per file statistic */ +struct mon_bin_stats { + u32 queued; + u32 dropped; +}; + +struct mon_bin_get { + struct mon_bin_hdr __user *hdr; /* Only 48 bytes, not 64. */ + void __user *data; + size_t alloc; /* Length of data (can be zero) */ +}; + +struct mon_bin_mfetch { + u32 __user *offvec; /* Vector of events fetched */ + u32 nfetch; /* Number of events to fetch (out: fetched) */ + u32 nflush; /* Number of events to flush */ +}; + +#ifdef CONFIG_COMPAT +struct mon_bin_get32 { + u32 hdr32; + u32 data32; + u32 alloc32; +}; + +struct mon_bin_mfetch32 { + u32 offvec32; + u32 nfetch32; + u32 nflush32; +}; +#endif + +/* Having these two values same prevents wrapping of the mon_bin_hdr */ +#define PKT_ALIGN 64 +#define PKT_SIZE 64 + +/* max number of USB bus supported */ +#define MON_BIN_MAX_MINOR 128 + +/* + * The buffer: map of used pages. + */ +struct mon_pgmap { + struct page *pg; + unsigned char *ptr; /* XXX just use page_to_virt everywhere? */ +}; + +/* + * This gets associated with an open file struct. + */ +struct mon_reader_bin { + /* The buffer: one per open. */ + spinlock_t b_lock; /* Protect b_cnt, b_in */ + unsigned int b_size; /* Current size of the buffer - bytes */ + unsigned int b_cnt; /* Bytes used */ + unsigned int b_in, b_out; /* Offsets into buffer - bytes */ + unsigned int b_read; /* Amount of read data in curr. pkt. */ + struct mon_pgmap *b_vec; /* The map array */ + wait_queue_head_t b_wait; /* Wait for data here */ + + struct mutex fetch_lock; /* Protect b_read, b_out */ + int mmap_active; + + /* A list of these is needed for "bus 0". Some time later. */ + struct mon_reader r; + + /* Stats */ + unsigned int cnt_lost; +}; + +static inline struct mon_bin_hdr *MON_OFF2HDR(const struct mon_reader_bin *rp, + unsigned int offset) +{ + return (struct mon_bin_hdr *) + (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE); +} + +#define MON_RING_EMPTY(rp) ((rp)->b_cnt == 0) + +static dev_t mon_bin_dev0; +static struct cdev mon_bin_cdev; + +static void mon_buff_area_fill(const struct mon_reader_bin *rp, + unsigned int offset, unsigned int size); +static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp); +static int mon_alloc_buff(struct mon_pgmap *map, int npages); +static void mon_free_buff(struct mon_pgmap *map, int npages); + +/* + * This is a "chunked memcpy". It does not manipulate any counters. + * But it returns the new offset for repeated application. + */ +unsigned int mon_copy_to_buff(const struct mon_reader_bin *this, + unsigned int off, const unsigned char *from, unsigned int length) +{ + unsigned int step_len; + unsigned char *buf; + unsigned int in_page; + + while (length) { + /* + * Determine step_len. + */ + step_len = length; + in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1)); + if (in_page < step_len) + step_len = in_page; + + /* + * Copy data and advance pointers. + */ + buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE; + memcpy(buf, from, step_len); + if ((off += step_len) >= this->b_size) off = 0; + from += step_len; + length -= step_len; + } + return off; +} + +/* + * This is a little worse than the above because it's "chunked copy_to_user". + * The return value is an error code, not an offset. + */ +static int copy_from_buf(const struct mon_reader_bin *this, unsigned int off, + char __user *to, int length) +{ + unsigned int step_len; + unsigned char *buf; + unsigned int in_page; + + while (length) { + /* + * Determine step_len. + */ + step_len = length; + in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1)); + if (in_page < step_len) + step_len = in_page; + + /* + * Copy data and advance pointers. + */ + buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE; + if (copy_to_user(to, buf, step_len)) + return -EINVAL; + if ((off += step_len) >= this->b_size) off = 0; + to += step_len; + length -= step_len; + } + return 0; +} + +/* + * Allocate an (aligned) area in the buffer. + * This is called under b_lock. + * Returns ~0 on failure. + */ +static unsigned int mon_buff_area_alloc(struct mon_reader_bin *rp, + unsigned int size) +{ + unsigned int offset; + + size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + if (rp->b_cnt + size > rp->b_size) + return ~0; + offset = rp->b_in; + rp->b_cnt += size; + if ((rp->b_in += size) >= rp->b_size) + rp->b_in -= rp->b_size; + return offset; +} + +/* + * This is the same thing as mon_buff_area_alloc, only it does not allow + * buffers to wrap. This is needed by applications which pass references + * into mmap-ed buffers up their stacks (libpcap can do that). + * + * Currently, we always have the header stuck with the data, although + * it is not strictly speaking necessary. + * + * When a buffer would wrap, we place a filler packet to mark the space. + */ +static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp, + unsigned int size) +{ + unsigned int offset; + unsigned int fill_size; + + size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + if (rp->b_cnt + size > rp->b_size) + return ~0; + if (rp->b_in + size > rp->b_size) { + /* + * This would wrap. Find if we still have space after + * skipping to the end of the buffer. If we do, place + * a filler packet and allocate a new packet. + */ + fill_size = rp->b_size - rp->b_in; + if (rp->b_cnt + size + fill_size > rp->b_size) + return ~0; + mon_buff_area_fill(rp, rp->b_in, fill_size); + + offset = 0; + rp->b_in = size; + rp->b_cnt += size + fill_size; + } else if (rp->b_in + size == rp->b_size) { + offset = rp->b_in; + rp->b_in = 0; + rp->b_cnt += size; + } else { + offset = rp->b_in; + rp->b_in += size; + rp->b_cnt += size; + } + return offset; +} + +/* + * Return a few (kilo-)bytes to the head of the buffer. + * This is used if a DMA fetch fails. + */ +static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size) +{ + + size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + rp->b_cnt -= size; + if (rp->b_in < size) + rp->b_in += rp->b_size; + rp->b_in -= size; +} + +/* + * This has to be called under both b_lock and fetch_lock, because + * it accesses both b_cnt and b_out. + */ +static void mon_buff_area_free(struct mon_reader_bin *rp, unsigned int size) +{ + + size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + rp->b_cnt -= size; + if ((rp->b_out += size) >= rp->b_size) + rp->b_out -= rp->b_size; +} + +static void mon_buff_area_fill(const struct mon_reader_bin *rp, + unsigned int offset, unsigned int size) +{ + struct mon_bin_hdr *ep; + + ep = MON_OFF2HDR(rp, offset); + memset(ep, 0, PKT_SIZE); + ep->type = '@'; + ep->len_cap = size - PKT_SIZE; +} + +static inline char mon_bin_get_setup(unsigned char *setupb, + const struct urb *urb, char ev_type) +{ + + if (!usb_pipecontrol(urb->pipe) || ev_type != 'S') + return '-'; + + if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP) + return mon_dmapeek(setupb, urb->setup_dma, SETUP_LEN); + if (urb->setup_packet == NULL) + return 'Z'; + + memcpy(setupb, urb->setup_packet, SETUP_LEN); + return 0; +} + +static char mon_bin_get_data(const struct mon_reader_bin *rp, + unsigned int offset, struct urb *urb, unsigned int length) +{ + + if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) { + mon_dmapeek_vec(rp, offset, urb->transfer_dma, length); + return 0; + } + + if (urb->transfer_buffer == NULL) + return 'Z'; + + mon_copy_to_buff(rp, offset, urb->transfer_buffer, length); + return 0; +} + +static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, + char ev_type) +{ + unsigned long flags; + struct timeval ts; + unsigned int urb_length; + unsigned int offset; + unsigned int length; + struct mon_bin_hdr *ep; + char data_tag = 0; + + do_gettimeofday(&ts); + + spin_lock_irqsave(&rp->b_lock, flags); + + /* + * Find the maximum allowable length, then allocate space. + */ + urb_length = (ev_type == 'S') ? + urb->transfer_buffer_length : urb->actual_length; + length = urb_length; + + if (length >= rp->b_size/5) + length = rp->b_size/5; + + if (usb_pipein(urb->pipe)) { + if (ev_type == 'S') { + length = 0; + data_tag = '<'; + } + } else { + if (ev_type == 'C') { + length = 0; + data_tag = '>'; + } + } + + if (rp->mmap_active) + offset = mon_buff_area_alloc_contiguous(rp, length + PKT_SIZE); + else + offset = mon_buff_area_alloc(rp, length + PKT_SIZE); + if (offset == ~0) { + rp->cnt_lost++; + spin_unlock_irqrestore(&rp->b_lock, flags); + return; + } + + ep = MON_OFF2HDR(rp, offset); + if ((offset += PKT_SIZE) >= rp->b_size) offset = 0; + + /* + * Fill the allocated area. + */ + memset(ep, 0, PKT_SIZE); + ep->type = ev_type; + ep->xfer_type = usb_pipetype(urb->pipe); + /* We use the fact that usb_pipein() returns 0x80 */ + ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe); + ep->devnum = usb_pipedevice(urb->pipe); + ep->busnum = rp->r.m_bus->u_bus->busnum; + ep->id = (unsigned long) urb; + ep->ts_sec = ts.tv_sec; + ep->ts_usec = ts.tv_usec; + ep->status = urb->status; + ep->len_urb = urb_length; + ep->len_cap = length; + + ep->flag_setup = mon_bin_get_setup(ep->setup, urb, ev_type); + if (length != 0) { + ep->flag_data = mon_bin_get_data(rp, offset, urb, length); + if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */ + ep->len_cap = 0; + mon_buff_area_shrink(rp, length); + } + } else { + ep->flag_data = data_tag; + } + + spin_unlock_irqrestore(&rp->b_lock, flags); + + wake_up(&rp->b_wait); +} + +static void mon_bin_submit(void *data, struct urb *urb) +{ + struct mon_reader_bin *rp = data; + mon_bin_event(rp, urb, 'S'); +} + +static void mon_bin_complete(void *data, struct urb *urb) +{ + struct mon_reader_bin *rp = data; + mon_bin_event(rp, urb, 'C'); +} + +static void mon_bin_error(void *data, struct urb *urb, int error) +{ + struct mon_reader_bin *rp = data; + unsigned long flags; + unsigned int offset; + struct mon_bin_hdr *ep; + + spin_lock_irqsave(&rp->b_lock, flags); + + offset = mon_buff_area_alloc(rp, PKT_SIZE); + if (offset == ~0) { + /* Not incrementing cnt_lost. Just because. */ + spin_unlock_irqrestore(&rp->b_lock, flags); + return; + } + + ep = MON_OFF2HDR(rp, offset); + + memset(ep, 0, PKT_SIZE); + ep->type = 'E'; + ep->xfer_type = usb_pipetype(urb->pipe); + /* We use the fact that usb_pipein() returns 0x80 */ + ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe); + ep->devnum = usb_pipedevice(urb->pipe); + ep->busnum = rp->r.m_bus->u_bus->busnum; + ep->id = (unsigned long) urb; + ep->status = error; + + ep->flag_setup = '-'; + ep->flag_data = 'E'; + + spin_unlock_irqrestore(&rp->b_lock, flags); + + wake_up(&rp->b_wait); +} + +static int mon_bin_open(struct inode *inode, struct file *file) +{ + struct mon_bus *mbus; + struct usb_bus *ubus; + struct mon_reader_bin *rp; + size_t size; + int rc; + + mutex_lock(&mon_lock); + if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) { + mutex_unlock(&mon_lock); + return -ENODEV; + } + if ((ubus = mbus->u_bus) == NULL) { + printk(KERN_ERR TAG ": consistency error on open\n"); + mutex_unlock(&mon_lock); + return -ENODEV; + } + + rp = kzalloc(sizeof(struct mon_reader_bin), GFP_KERNEL); + if (rp == NULL) { + rc = -ENOMEM; + goto err_alloc; + } + spin_lock_init(&rp->b_lock); + init_waitqueue_head(&rp->b_wait); + mutex_init(&rp->fetch_lock); + + rp->b_size = BUFF_DFL; + + size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE); + if ((rp->b_vec = kzalloc(size, GFP_KERNEL)) == NULL) { + rc = -ENOMEM; + goto err_allocvec; + } + + if ((rc = mon_alloc_buff(rp->b_vec, rp->b_size/CHUNK_SIZE)) < 0) + goto err_allocbuff; + + rp->r.m_bus = mbus; + rp->r.r_data = rp; + rp->r.rnf_submit = mon_bin_submit; + rp->r.rnf_error = mon_bin_error; + rp->r.rnf_complete = mon_bin_complete; + + mon_reader_add(mbus, &rp->r); + + file->private_data = rp; + mutex_unlock(&mon_lock); + return 0; + +err_allocbuff: + kfree(rp->b_vec); +err_allocvec: + kfree(rp); +err_alloc: + mutex_unlock(&mon_lock); + return rc; +} + +/* + * Extract an event from buffer and copy it to user space. + * Wait if there is no event ready. + * Returns zero or error. + */ +static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp, + struct mon_bin_hdr __user *hdr, void __user *data, unsigned int nbytes) +{ + unsigned long flags; + struct mon_bin_hdr *ep; + size_t step_len; + unsigned int offset; + int rc; + + mutex_lock(&rp->fetch_lock); + + if ((rc = mon_bin_wait_event(file, rp)) < 0) { + mutex_unlock(&rp->fetch_lock); + return rc; + } + + ep = MON_OFF2HDR(rp, rp->b_out); + + if (copy_to_user(hdr, ep, sizeof(struct mon_bin_hdr))) { + mutex_unlock(&rp->fetch_lock); + return -EFAULT; + } + + step_len = min(ep->len_cap, nbytes); + if ((offset = rp->b_out + PKT_SIZE) >= rp->b_size) offset = 0; + + if (copy_from_buf(rp, offset, data, step_len)) { + mutex_unlock(&rp->fetch_lock); + return -EFAULT; + } + + spin_lock_irqsave(&rp->b_lock, flags); + mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); + spin_unlock_irqrestore(&rp->b_lock, flags); + rp->b_read = 0; + + mutex_unlock(&rp->fetch_lock); + return 0; +} + +static int mon_bin_release(struct inode *inode, struct file *file) +{ + struct mon_reader_bin *rp = file->private_data; + struct mon_bus* mbus = rp->r.m_bus; + + mutex_lock(&mon_lock); + + if (mbus->nreaders <= 0) { + printk(KERN_ERR TAG ": consistency error on close\n"); + mutex_unlock(&mon_lock); + return 0; + } + mon_reader_del(mbus, &rp->r); + + mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE); + kfree(rp->b_vec); + kfree(rp); + + mutex_unlock(&mon_lock); + return 0; +} + +static ssize_t mon_bin_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct mon_reader_bin *rp = file->private_data; + unsigned long flags; + struct mon_bin_hdr *ep; + unsigned int offset; + size_t step_len; + char *ptr; + ssize_t done = 0; + int rc; + + mutex_lock(&rp->fetch_lock); + + if ((rc = mon_bin_wait_event(file, rp)) < 0) { + mutex_unlock(&rp->fetch_lock); + return rc; + } + + ep = MON_OFF2HDR(rp, rp->b_out); + + if (rp->b_read < sizeof(struct mon_bin_hdr)) { + step_len = min(nbytes, sizeof(struct mon_bin_hdr) - rp->b_read); + ptr = ((char *)ep) + rp->b_read; + if (step_len && copy_to_user(buf, ptr, step_len)) { + mutex_unlock(&rp->fetch_lock); + return -EFAULT; + } + nbytes -= step_len; + buf += step_len; + rp->b_read += step_len; + done += step_len; + } + + if (rp->b_read >= sizeof(struct mon_bin_hdr)) { + step_len = min(nbytes, (size_t)ep->len_cap); + offset = rp->b_out + PKT_SIZE; + offset += rp->b_read - sizeof(struct mon_bin_hdr); + if (offset >= rp->b_size) + offset -= rp->b_size; + if (copy_from_buf(rp, offset, buf, step_len)) { + mutex_unlock(&rp->fetch_lock); + return -EFAULT; + } + nbytes -= step_len; + buf += step_len; + rp->b_read += step_len; + done += step_len; + } + + /* + * Check if whole packet was read, and if so, jump to the next one. + */ + if (rp->b_read >= sizeof(struct mon_bin_hdr) + ep->len_cap) { + spin_lock_irqsave(&rp->b_lock, flags); + mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); + spin_unlock_irqrestore(&rp->b_lock, flags); + rp->b_read = 0; + } + + mutex_unlock(&rp->fetch_lock); + return done; +} + +/* + * Remove at most nevents from chunked buffer. + * Returns the number of removed events. + */ +static int mon_bin_flush(struct mon_reader_bin *rp, unsigned nevents) +{ + unsigned long flags; + struct mon_bin_hdr *ep; + int i; + + mutex_lock(&rp->fetch_lock); + spin_lock_irqsave(&rp->b_lock, flags); + for (i = 0; i < nevents; ++i) { + if (MON_RING_EMPTY(rp)) + break; + + ep = MON_OFF2HDR(rp, rp->b_out); + mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); + } + spin_unlock_irqrestore(&rp->b_lock, flags); + rp->b_read = 0; + mutex_unlock(&rp->fetch_lock); + return i; +} + +/* + * Fetch at most max event offsets into the buffer and put them into vec. + * The events are usually freed later with mon_bin_flush. + * Return the effective number of events fetched. + */ +static int mon_bin_fetch(struct file *file, struct mon_reader_bin *rp, + u32 __user *vec, unsigned int max) +{ + unsigned int cur_out; + unsigned int bytes, avail; + unsigned int size; + unsigned int nevents; + struct mon_bin_hdr *ep; + unsigned long flags; + int rc; + + mutex_lock(&rp->fetch_lock); + + if ((rc = mon_bin_wait_event(file, rp)) < 0) { + mutex_unlock(&rp->fetch_lock); + return rc; + } + + spin_lock_irqsave(&rp->b_lock, flags); + avail = rp->b_cnt; + spin_unlock_irqrestore(&rp->b_lock, flags); + + cur_out = rp->b_out; + nevents = 0; + bytes = 0; + while (bytes < avail) { + if (nevents >= max) + break; + + ep = MON_OFF2HDR(rp, cur_out); + if (put_user(cur_out, &vec[nevents])) { + mutex_unlock(&rp->fetch_lock); + return -EFAULT; + } + + nevents++; + size = ep->len_cap + PKT_SIZE; + size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + if ((cur_out += size) >= rp->b_size) + cur_out -= rp->b_size; + bytes += size; + } + + mutex_unlock(&rp->fetch_lock); + return nevents; +} + +/* + * Count events. This is almost the same as the above mon_bin_fetch, + * only we do not store offsets into user vector, and we have no limit. + */ +static int mon_bin_queued(struct mon_reader_bin *rp) +{ + unsigned int cur_out; + unsigned int bytes, avail; + unsigned int size; + unsigned int nevents; + struct mon_bin_hdr *ep; + unsigned long flags; + + mutex_lock(&rp->fetch_lock); + + spin_lock_irqsave(&rp->b_lock, flags); + avail = rp->b_cnt; + spin_unlock_irqrestore(&rp->b_lock, flags); + + cur_out = rp->b_out; + nevents = 0; + bytes = 0; + while (bytes < avail) { + ep = MON_OFF2HDR(rp, cur_out); + + nevents++; + size = ep->len_cap + PKT_SIZE; + size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + if ((cur_out += size) >= rp->b_size) + cur_out -= rp->b_size; + bytes += size; + } + + mutex_unlock(&rp->fetch_lock); + return nevents; +} + +/* + */ +static int mon_bin_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mon_reader_bin *rp = file->private_data; + // struct mon_bus* mbus = rp->r.m_bus; + int ret = 0; + struct mon_bin_hdr *ep; + unsigned long flags; + + switch (cmd) { + + case MON_IOCQ_URB_LEN: + /* + * N.B. This only returns the size of data, without the header. + */ + spin_lock_irqsave(&rp->b_lock, flags); + if (!MON_RING_EMPTY(rp)) { + ep = MON_OFF2HDR(rp, rp->b_out); + ret = ep->len_cap; + } + spin_unlock_irqrestore(&rp->b_lock, flags); + break; + + case MON_IOCQ_RING_SIZE: + ret = rp->b_size; + break; + + case MON_IOCT_RING_SIZE: + /* + * Changing the buffer size will flush it's contents; the new + * buffer is allocated before releasing the old one to be sure + * the device will stay functional also in case of memory + * pressure. + */ + { + int size; + struct mon_pgmap *vec; + + if (arg < BUFF_MIN || arg > BUFF_MAX) + return -EINVAL; + + size = CHUNK_ALIGN(arg); + if ((vec = kzalloc(sizeof(struct mon_pgmap) * (size/CHUNK_SIZE), + GFP_KERNEL)) == NULL) { + ret = -ENOMEM; + break; + } + + ret = mon_alloc_buff(vec, size/CHUNK_SIZE); + if (ret < 0) { + kfree(vec); + break; + } + + mutex_lock(&rp->fetch_lock); + spin_lock_irqsave(&rp->b_lock, flags); + mon_free_buff(rp->b_vec, size/CHUNK_SIZE); + kfree(rp->b_vec); + rp->b_vec = vec; + rp->b_size = size; + rp->b_read = rp->b_in = rp->b_out = rp->b_cnt = 0; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + mutex_unlock(&rp->fetch_lock); + } + break; + + case MON_IOCH_MFLUSH: + ret = mon_bin_flush(rp, arg); + break; + + case MON_IOCX_GET: + { + struct mon_bin_get getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get))) + return -EFAULT; + + if (getb.alloc > 0x10000000) /* Want to cast to u32 */ + return -EINVAL; + ret = mon_bin_get_event(file, rp, + getb.hdr, getb.data, (unsigned int)getb.alloc); + } + break; + +#ifdef CONFIG_COMPAT + case MON_IOCX_GET32: { + struct mon_bin_get32 getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get32))) + return -EFAULT; + + ret = mon_bin_get_event(file, rp, + compat_ptr(getb.hdr32), compat_ptr(getb.data32), + getb.alloc32); + } + break; +#endif + + case MON_IOCX_MFETCH: + { + struct mon_bin_mfetch mfetch; + struct mon_bin_mfetch __user *uptr; + + uptr = (struct mon_bin_mfetch __user *)arg; + + if (copy_from_user(&mfetch, uptr, sizeof(mfetch))) + return -EFAULT; + + if (mfetch.nflush) { + ret = mon_bin_flush(rp, mfetch.nflush); + if (ret < 0) + return ret; + if (put_user(ret, &uptr->nflush)) + return -EFAULT; + } + ret = mon_bin_fetch(file, rp, mfetch.offvec, mfetch.nfetch); + if (ret < 0) + return ret; + if (put_user(ret, &uptr->nfetch)) + return -EFAULT; + ret = 0; + } + break; + +#ifdef CONFIG_COMPAT + case MON_IOCX_MFETCH32: + { + struct mon_bin_mfetch32 mfetch; + struct mon_bin_mfetch32 __user *uptr; + + uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg); + + if (copy_from_user(&mfetch, uptr, sizeof(mfetch))) + return -EFAULT; + + if (mfetch.nflush32) { + ret = mon_bin_flush(rp, mfetch.nflush32); + if (ret < 0) + return ret; + if (put_user(ret, &uptr->nflush32)) + return -EFAULT; + } + ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32), + mfetch.nfetch32); + if (ret < 0) + return ret; + if (put_user(ret, &uptr->nfetch32)) + return -EFAULT; + ret = 0; + } + break; +#endif + + case MON_IOCG_STATS: { + struct mon_bin_stats __user *sp; + unsigned int nevents; + unsigned int ndropped; + + spin_lock_irqsave(&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + nevents = mon_bin_queued(rp); + + sp = (struct mon_bin_stats __user *)arg; + if (put_user(rp->cnt_lost, &sp->dropped)) + return -EFAULT; + if (put_user(nevents, &sp->queued)) + return -EFAULT; + + } + break; + + default: + return -ENOTTY; + } + + return ret; +} + +static unsigned int +mon_bin_poll(struct file *file, struct poll_table_struct *wait) +{ + struct mon_reader_bin *rp = file->private_data; + unsigned int mask = 0; + unsigned long flags; + + if (file->f_mode & FMODE_READ) + poll_wait(file, &rp->b_wait, wait); + + spin_lock_irqsave(&rp->b_lock, flags); + if (!MON_RING_EMPTY(rp)) + mask |= POLLIN | POLLRDNORM; /* readable */ + spin_unlock_irqrestore(&rp->b_lock, flags); + return mask; +} + +/* + * open and close: just keep track of how many times the device is + * mapped, to use the proper memory allocation function. + */ +static void mon_bin_vma_open(struct vm_area_struct *vma) +{ + struct mon_reader_bin *rp = vma->vm_private_data; + rp->mmap_active++; +} + +static void mon_bin_vma_close(struct vm_area_struct *vma) +{ + struct mon_reader_bin *rp = vma->vm_private_data; + rp->mmap_active--; +} + +/* + * Map ring pages to user space. + */ +struct page *mon_bin_vma_nopage(struct vm_area_struct *vma, + unsigned long address, int *type) +{ + struct mon_reader_bin *rp = vma->vm_private_data; + unsigned long offset, chunk_idx; + struct page *pageptr; + + offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); + if (offset >= rp->b_size) + return NOPAGE_SIGBUS; + chunk_idx = offset / CHUNK_SIZE; + pageptr = rp->b_vec[chunk_idx].pg; + get_page(pageptr); + if (type) + *type = VM_FAULT_MINOR; + return pageptr; +} + +struct vm_operations_struct mon_bin_vm_ops = { + .open = mon_bin_vma_open, + .close = mon_bin_vma_close, + .nopage = mon_bin_vma_nopage, +}; + +int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma) +{ + /* don't do anything here: "nopage" will set up page table entries */ + vma->vm_ops = &mon_bin_vm_ops; + vma->vm_flags |= VM_RESERVED; + vma->vm_private_data = filp->private_data; + mon_bin_vma_open(vma); + return 0; +} + +struct file_operations mon_fops_binary = { + .owner = THIS_MODULE, + .open = mon_bin_open, + .llseek = no_llseek, + .read = mon_bin_read, + /* .write = mon_text_write, */ + .poll = mon_bin_poll, + .ioctl = mon_bin_ioctl, + .release = mon_bin_release, +}; + +static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp) +{ + DECLARE_WAITQUEUE(waita, current); + unsigned long flags; + + add_wait_queue(&rp->b_wait, &waita); + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&rp->b_lock, flags); + while (MON_RING_EMPTY(rp)) { + spin_unlock_irqrestore(&rp->b_lock, flags); + + if (file->f_flags & O_NONBLOCK) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&rp->b_wait, &waita); + return -EWOULDBLOCK; /* Same as EAGAIN in Linux */ + } + schedule(); + if (signal_pending(current)) { + remove_wait_queue(&rp->b_wait, &waita); + return -EINTR; + } + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&rp->b_lock, flags); + } + spin_unlock_irqrestore(&rp->b_lock, flags); + + set_current_state(TASK_RUNNING); + remove_wait_queue(&rp->b_wait, &waita); + return 0; +} + +static int mon_alloc_buff(struct mon_pgmap *map, int npages) +{ + int n; + unsigned long vaddr; + + for (n = 0; n < npages; n++) { + vaddr = get_zeroed_page(GFP_KERNEL); + if (vaddr == 0) { + while (n-- != 0) + free_page((unsigned long) map[n].ptr); + return -ENOMEM; + } + map[n].ptr = (unsigned char *) vaddr; + map[n].pg = virt_to_page(vaddr); + } + return 0; +} + +static void mon_free_buff(struct mon_pgmap *map, int npages) +{ + int n; + + for (n = 0; n < npages; n++) + free_page((unsigned long) map[n].ptr); +} + +int __init mon_bin_init(void) +{ + int rc; + + rc = alloc_chrdev_region(&mon_bin_dev0, 0, MON_BIN_MAX_MINOR, "usbmon"); + if (rc < 0) + goto err_dev; + + cdev_init(&mon_bin_cdev, &mon_fops_binary); + mon_bin_cdev.owner = THIS_MODULE; + + rc = cdev_add(&mon_bin_cdev, mon_bin_dev0, MON_BIN_MAX_MINOR); + if (rc < 0) + goto err_add; + + return 0; + +err_add: + unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR); +err_dev: + return rc; +} + +void __exit mon_bin_exit(void) +{ + cdev_del(&mon_bin_cdev); + unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR); +} diff --git a/drivers/usb/mon/mon_dma.c b/drivers/usb/mon/mon_dma.c index ddcfc01e77a0..140cc80bd2b1 100644 --- a/drivers/usb/mon/mon_dma.c +++ b/drivers/usb/mon/mon_dma.c @@ -48,6 +48,36 @@ char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len) local_irq_restore(flags); return 0; } + +void mon_dmapeek_vec(const struct mon_reader_bin *rp, + unsigned int offset, dma_addr_t dma_addr, unsigned int length) +{ + unsigned long flags; + unsigned int step_len; + struct page *pg; + unsigned char *map; + unsigned long page_off, page_len; + + local_irq_save(flags); + while (length) { + /* compute number of bytes we are going to copy in this page */ + step_len = length; + page_off = dma_addr & (PAGE_SIZE-1); + page_len = PAGE_SIZE - page_off; + if (page_len < step_len) + step_len = page_len; + + /* copy data and advance pointers */ + pg = phys_to_page(dma_addr); + map = kmap_atomic(pg, KM_IRQ0); + offset = mon_copy_to_buff(rp, offset, map + page_off, step_len); + kunmap_atomic(map, KM_IRQ0); + dma_addr += step_len; + length -= step_len; + } + local_irq_restore(flags); +} + #endif /* __i386__ */ #ifndef MON_HAS_UNMAP @@ -55,4 +85,11 @@ char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len) { return 'D'; } -#endif + +void mon_dmapeek_vec(const struct mon_reader_bin *rp, + unsigned int offset, dma_addr_t dma_addr, unsigned int length) +{ + ; +} + +#endif /* MON_HAS_UNMAP */ diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 394bbf2f68d4..c9739e7b35e5 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/usb.h> -#include <linux/debugfs.h> #include <linux/smp_lock.h> #include <linux/notifier.h> #include <linux/mutex.h> @@ -22,11 +21,10 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb); static void mon_stop(struct mon_bus *mbus); static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus); static void mon_bus_drop(struct kref *r); -static void mon_bus_init(struct dentry *mondir, struct usb_bus *ubus); +static void mon_bus_init(struct usb_bus *ubus); DEFINE_MUTEX(mon_lock); -static struct dentry *mon_dir; /* /dbg/usbmon */ static LIST_HEAD(mon_buses); /* All buses we know: struct mon_bus */ /* @@ -200,7 +198,7 @@ static void mon_stop(struct mon_bus *mbus) */ static void mon_bus_add(struct usb_bus *ubus) { - mon_bus_init(mon_dir, ubus); + mon_bus_init(ubus); } /* @@ -212,8 +210,8 @@ static void mon_bus_remove(struct usb_bus *ubus) mutex_lock(&mon_lock); list_del(&mbus->bus_link); - debugfs_remove(mbus->dent_t); - debugfs_remove(mbus->dent_s); + if (mbus->text_inited) + mon_text_del(mbus); mon_dissolve(mbus, ubus); kref_put(&mbus->ref, mon_bus_drop); @@ -281,13 +279,9 @@ static void mon_bus_drop(struct kref *r) * - refcount USB bus struct * - link */ -static void mon_bus_init(struct dentry *mondir, struct usb_bus *ubus) +static void mon_bus_init(struct usb_bus *ubus) { - struct dentry *d; struct mon_bus *mbus; - enum { NAMESZ = 10 }; - char name[NAMESZ]; - int rc; if ((mbus = kzalloc(sizeof(struct mon_bus), GFP_KERNEL)) == NULL) goto err_alloc; @@ -303,57 +297,54 @@ static void mon_bus_init(struct dentry *mondir, struct usb_bus *ubus) ubus->mon_bus = mbus; mbus->uses_dma = ubus->uses_dma; - rc = snprintf(name, NAMESZ, "%dt", ubus->busnum); - if (rc <= 0 || rc >= NAMESZ) - goto err_print_t; - d = debugfs_create_file(name, 0600, mondir, mbus, &mon_fops_text); - if (d == NULL) - goto err_create_t; - mbus->dent_t = d; - - rc = snprintf(name, NAMESZ, "%ds", ubus->busnum); - if (rc <= 0 || rc >= NAMESZ) - goto err_print_s; - d = debugfs_create_file(name, 0600, mondir, mbus, &mon_fops_stat); - if (d == NULL) - goto err_create_s; - mbus->dent_s = d; + mbus->text_inited = mon_text_add(mbus, ubus); + // mon_bin_add(...) mutex_lock(&mon_lock); list_add_tail(&mbus->bus_link, &mon_buses); mutex_unlock(&mon_lock); return; -err_create_s: -err_print_s: - debugfs_remove(mbus->dent_t); -err_create_t: -err_print_t: - kfree(mbus); err_alloc: return; } +/* + * Search a USB bus by number. Notice that USB bus numbers start from one, + * which we may later use to identify "all" with zero. + * + * This function must be called with mon_lock held. + * + * This is obviously inefficient and may be revised in the future. + */ +struct mon_bus *mon_bus_lookup(unsigned int num) +{ + struct list_head *p; + struct mon_bus *mbus; + + list_for_each (p, &mon_buses) { + mbus = list_entry(p, struct mon_bus, bus_link); + if (mbus->u_bus->busnum == num) { + return mbus; + } + } + return NULL; +} + static int __init mon_init(void) { struct usb_bus *ubus; - struct dentry *mondir; + int rc; - mondir = debugfs_create_dir("usbmon", NULL); - if (IS_ERR(mondir)) { - printk(KERN_NOTICE TAG ": debugfs is not available\n"); - return -ENODEV; - } - if (mondir == NULL) { - printk(KERN_NOTICE TAG ": unable to create usbmon directory\n"); - return -ENODEV; - } - mon_dir = mondir; + if ((rc = mon_text_init()) != 0) + goto err_text; + if ((rc = mon_bin_init()) != 0) + goto err_bin; if (usb_mon_register(&mon_ops_0) != 0) { printk(KERN_NOTICE TAG ": unable to register with the core\n"); - debugfs_remove(mondir); - return -ENODEV; + rc = -ENODEV; + goto err_reg; } // MOD_INC_USE_COUNT(which_module?); @@ -361,10 +352,17 @@ static int __init mon_init(void) mutex_lock(&usb_bus_list_lock); list_for_each_entry (ubus, &usb_bus_list, bus_list) { - mon_bus_init(mondir, ubus); + mon_bus_init(ubus); } mutex_unlock(&usb_bus_list_lock); return 0; + +err_reg: + mon_bin_exit(); +err_bin: + mon_text_exit(); +err_text: + return rc; } static void __exit mon_exit(void) @@ -381,8 +379,8 @@ static void __exit mon_exit(void) mbus = list_entry(p, struct mon_bus, bus_link); list_del(p); - debugfs_remove(mbus->dent_t); - debugfs_remove(mbus->dent_s); + if (mbus->text_inited) + mon_text_del(mbus); /* * This never happens, because the open/close paths in @@ -401,7 +399,8 @@ static void __exit mon_exit(void) } mutex_unlock(&mon_lock); - debugfs_remove(mon_dir); + mon_text_exit(); + mon_bin_exit(); } module_init(mon_init); diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 05cf2c9a8f84..d38a1279d9d9 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -9,6 +9,7 @@ #include <linux/usb.h> #include <linux/time.h> #include <linux/mutex.h> +#include <linux/debugfs.h> #include <asm/uaccess.h> #include "usb_mon.h" @@ -63,6 +64,8 @@ struct mon_reader_text { char slab_name[SLAB_NAME_SZ]; }; +static struct dentry *mon_dir; /* Usually /sys/kernel/debug/usbmon */ + static void mon_text_ctor(void *, struct kmem_cache *, unsigned long); /* @@ -436,7 +439,7 @@ static int mon_text_release(struct inode *inode, struct file *file) return 0; } -const struct file_operations mon_fops_text = { +static const struct file_operations mon_fops_text = { .owner = THIS_MODULE, .open = mon_text_open, .llseek = no_llseek, @@ -447,6 +450,47 @@ const struct file_operations mon_fops_text = { .release = mon_text_release, }; +int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) +{ + struct dentry *d; + enum { NAMESZ = 10 }; + char name[NAMESZ]; + int rc; + + rc = snprintf(name, NAMESZ, "%dt", ubus->busnum); + if (rc <= 0 || rc >= NAMESZ) + goto err_print_t; + d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text); + if (d == NULL) + goto err_create_t; + mbus->dent_t = d; + + /* XXX The stats do not belong to here (text API), but oh well... */ + rc = snprintf(name, NAMESZ, "%ds", ubus->busnum); + if (rc <= 0 || rc >= NAMESZ) + goto err_print_s; + d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_stat); + if (d == NULL) + goto err_create_s; + mbus->dent_s = d; + + return 1; + +err_create_s: +err_print_s: + debugfs_remove(mbus->dent_t); + mbus->dent_t = NULL; +err_create_t: +err_print_t: + return 0; +} + +void mon_text_del(struct mon_bus *mbus) +{ + debugfs_remove(mbus->dent_t); + debugfs_remove(mbus->dent_s); +} + /* * Slab interface: constructor. */ @@ -459,3 +503,24 @@ static void mon_text_ctor(void *mem, struct kmem_cache *slab, unsigned long sfla memset(mem, 0xe5, sizeof(struct mon_event_text)); } +int __init mon_text_init(void) +{ + struct dentry *mondir; + + mondir = debugfs_create_dir("usbmon", NULL); + if (IS_ERR(mondir)) { + printk(KERN_NOTICE TAG ": debugfs is not available\n"); + return -ENODEV; + } + if (mondir == NULL) { + printk(KERN_NOTICE TAG ": unable to create usbmon directory\n"); + return -ENODEV; + } + mon_dir = mondir; + return 0; +} + +void __exit mon_text_exit(void) +{ + debugfs_remove(mon_dir); +} diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index ab9d02d5df77..4f949ce8a7f3 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -17,9 +17,11 @@ struct mon_bus { struct list_head bus_link; spinlock_t lock; + struct usb_bus *u_bus; + + int text_inited; struct dentry *dent_s; /* Debugging file */ struct dentry *dent_t; /* Text interface file */ - struct usb_bus *u_bus; int uses_dma; /* Ref */ @@ -48,13 +50,35 @@ struct mon_reader { void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r); void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r); +struct mon_bus *mon_bus_lookup(unsigned int num); + +int /*bool*/ mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus); +void mon_text_del(struct mon_bus *mbus); +// void mon_bin_add(struct mon_bus *); + +int __init mon_text_init(void); +void __exit mon_text_exit(void); +int __init mon_bin_init(void); +void __exit mon_bin_exit(void); + /* - */ + * DMA interface. + * + * XXX The vectored side needs a serious re-thinking. Abstracting vectors, + * like in Paolo's original patch, produces a double pkmap. We need an idea. +*/ extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len); +struct mon_reader_bin; +extern void mon_dmapeek_vec(const struct mon_reader_bin *rp, + unsigned int offset, dma_addr_t dma_addr, unsigned int len); +extern unsigned int mon_copy_to_buff(const struct mon_reader_bin *rp, + unsigned int offset, const unsigned char *from, unsigned int len); + +/* + */ extern struct mutex mon_lock; -extern const struct file_operations mon_fops_text; extern const struct file_operations mon_fops_stat; #endif /* __USB_MON_H */ |