diff options
| -rw-r--r-- | arch/riscv/Kconfig | 1 | ||||
| -rw-r--r-- | arch/riscv/include/asm/irq.h | 2 | ||||
| -rw-r--r-- | arch/riscv/kernel/irq.c | 33 | ||||
| -rw-r--r-- | arch/riscv/kernel/traps.c | 2 | ||||
| -rw-r--r-- | drivers/irqchip/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/irqchip/Makefile | 1 | ||||
| -rw-r--r-- | drivers/irqchip/irq-riscv-intc.c | 146 | ||||
| -rw-r--r-- | drivers/irqchip/irq-sifive-plic.c | 32 | ||||
| -rw-r--r-- | include/linux/cpuhotplug.h | 1 |
9 files changed, 188 insertions, 43 deletions
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 8244b8f7e7c3..4f5bff0e7ab2 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -40,6 +40,7 @@ config RISCV select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER if MMU select GENERIC_STRNLEN_USER if MMU + select HANDLE_DOMAIN_IRQ select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_KASAN if MMU && 64BIT select HAVE_ARCH_KGDB diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h index 0183e15ace66..a9e5f07a7e9c 100644 --- a/arch/riscv/include/asm/irq.h +++ b/arch/riscv/include/asm/irq.h @@ -10,8 +10,6 @@ #include <linux/interrupt.h> #include <linux/linkage.h> -#define NR_IRQS 0 - void riscv_timer_interrupt(void); #include <asm-generic/irq.h> diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c index bb0bfcd537e7..eb8777642ce6 100644 --- a/arch/riscv/kernel/irq.c +++ b/arch/riscv/kernel/irq.c @@ -7,7 +7,6 @@ #include <linux/interrupt.h> #include <linux/irqchip.h> -#include <linux/irqdomain.h> #include <linux/seq_file.h> #include <asm/smp.h> @@ -19,39 +18,13 @@ int arch_show_interrupts(struct seq_file *p, int prec) asmlinkage __visible void __irq_entry do_IRQ(struct pt_regs *regs) { - struct pt_regs *old_regs; - - switch (regs->cause & ~CAUSE_IRQ_FLAG) { - case RV_IRQ_TIMER: - old_regs = set_irq_regs(regs); - irq_enter(); - riscv_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); - break; -#ifdef CONFIG_SMP - case RV_IRQ_SOFT: - /* - * We only use software interrupts to pass IPIs, so if a non-SMP - * system gets one, then we don't know what to do. - */ - handle_IPI(regs); - break; -#endif - case RV_IRQ_EXT: - old_regs = set_irq_regs(regs); - irq_enter(); + if (handle_arch_irq) handle_arch_irq(regs); - irq_exit(); - set_irq_regs(old_regs); - break; - default: - pr_alert("unexpected interrupt cause 0x%lx", regs->cause); - BUG(); - } } void __init init_IRQ(void) { irqchip_init(); + if (!handle_arch_irq) + panic("No interrupt controller found."); } diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c index 5080fdf8c296..ecec1778e3a4 100644 --- a/arch/riscv/kernel/traps.c +++ b/arch/riscv/kernel/traps.c @@ -183,6 +183,4 @@ void trap_init(void) csr_write(CSR_SCRATCH, 0); /* Set the exception vector address */ csr_write(CSR_TVEC, &handle_exception); - /* Enable interrupts */ - csr_write(CSR_IE, IE_SIE); } diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 66b9a68f5e9f..29fead208cad 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -493,6 +493,19 @@ config TI_SCI_INTA_IRQCHIP If you wish to use interrupt aggregator irq resources managed by the TI System Controller, say Y here. Otherwise, say N. +config RISCV_INTC + bool "RISC-V Local Interrupt Controller" + depends on RISCV + default y + help + This enables support for the per-HART local interrupt controller + found in standard RISC-V systems. The per-HART local interrupt + controller handles timer interrupts, software interrupts, and + hardware interrupts. Without a per-HART local interrupt controller, + a RISC-V system will be unable to handle any interrupts. + + If you don't know what to do here, say Y. + config SIFIVE_PLIC bool "SiFive Platform-Level Interrupt Controller" depends on RISCV diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 3a4ce283189a..133f9c45744a 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_NDS32) += irq-ativic32.o obj-$(CONFIG_QCOM_PDC) += qcom-pdc.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o +obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c new file mode 100644 index 000000000000..a80fb1731c50 --- /dev/null +++ b/drivers/irqchip/irq-riscv-intc.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Regents of the University of California + * Copyright (C) 2017-2018 SiFive + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ + +#define pr_fmt(fmt) "riscv-intc: " fmt +#include <linux/atomic.h> +#include <linux/bits.h> +#include <linux/cpu.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/smp.h> + +static struct irq_domain *intc_domain; + +static asmlinkage void riscv_intc_irq(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG; + + if (unlikely(cause >= BITS_PER_LONG)) + panic("unexpected interrupt cause"); + + switch (cause) { + case RV_IRQ_TIMER: + old_regs = set_irq_regs(regs); + irq_enter(); + riscv_timer_interrupt(); + irq_exit(); + set_irq_regs(old_regs); + break; +#ifdef CONFIG_SMP + case RV_IRQ_SOFT: + /* + * We only use software interrupts to pass IPIs, so if a + * non-SMP system gets one, then we don't know what to do. + */ + handle_IPI(regs); + break; +#endif + default: + handle_domain_irq(intc_domain, cause, regs); + break; + } +} + +/* + * On RISC-V systems local interrupts are masked or unmasked by writing + * the SIE (Supervisor Interrupt Enable) CSR. As CSRs can only be written + * on the local hart, these functions can only be called on the hart that + * corresponds to the IRQ chip. + */ + +static void riscv_intc_irq_mask(struct irq_data *d) +{ + csr_clear(CSR_IE, BIT(d->hwirq)); +} + +static void riscv_intc_irq_unmask(struct irq_data *d) +{ + csr_set(CSR_IE, BIT(d->hwirq)); +} + +static int riscv_intc_cpu_starting(unsigned int cpu) +{ + csr_set(CSR_IE, BIT(RV_IRQ_SOFT)); + return 0; +} + +static int riscv_intc_cpu_dying(unsigned int cpu) +{ + csr_clear(CSR_IE, BIT(RV_IRQ_SOFT)); + return 0; +} + +static struct irq_chip riscv_intc_chip = { + .name = "RISC-V INTC", + .irq_mask = riscv_intc_irq_mask, + .irq_unmask = riscv_intc_irq_unmask, +}; + +static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_percpu_devid(irq); + irq_domain_set_info(d, irq, hwirq, &riscv_intc_chip, d->host_data, + handle_percpu_devid_irq, NULL, NULL); + + return 0; +} + +static const struct irq_domain_ops riscv_intc_domain_ops = { + .map = riscv_intc_domain_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int __init riscv_intc_init(struct device_node *node, + struct device_node *parent) +{ + int rc, hartid; + + hartid = riscv_of_parent_hartid(node); + if (hartid < 0) { + pr_warn("unable to fine hart id for %pOF\n", node); + return 0; + } + + /* + * The DT will have one INTC DT node under each CPU (or HART) + * DT node so riscv_intc_init() function will be called once + * for each INTC DT node. We only need to do INTC initialization + * for the INTC DT node belonging to boot CPU (or boot HART). + */ + if (riscv_hartid_to_cpuid(hartid) != smp_processor_id()) + return 0; + + intc_domain = irq_domain_add_linear(node, BITS_PER_LONG, + &riscv_intc_domain_ops, NULL); + if (!intc_domain) { + pr_err("unable to add IRQ domain\n"); + return -ENXIO; + } + + rc = set_handle_irq(&riscv_intc_irq); + if (rc) { + pr_err("failed to set irq handler\n"); + return rc; + } + + cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING, + "irqchip/riscv/intc:starting", + riscv_intc_cpu_starting, + riscv_intc_cpu_dying); + + pr_info("%d local interrupts mapped\n", BITS_PER_LONG); + + return 0; +} + +IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init); diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c index 16d31d114c30..eaa3e9fe54e9 100644 --- a/drivers/irqchip/irq-sifive-plic.c +++ b/drivers/irqchip/irq-sifive-plic.c @@ -9,6 +9,7 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/module.h> #include <linux/of.h> @@ -76,6 +77,7 @@ struct plic_handler { void __iomem *enable_base; struct plic_priv *priv; }; +static int plic_parent_irq; static bool plic_cpuhp_setup_done; static DEFINE_PER_CPU(struct plic_handler, plic_handlers); @@ -219,15 +221,17 @@ static const struct irq_domain_ops plic_irqdomain_ops = { * that source ID back to the same claim register. This automatically enables * and disables the interrupt, so there's nothing else to do. */ -static void plic_handle_irq(struct pt_regs *regs) +static void plic_handle_irq(struct irq_desc *desc) { struct plic_handler *handler = this_cpu_ptr(&plic_handlers); + struct irq_chip *chip = irq_desc_get_chip(desc); void __iomem *claim = handler->hart_base + CONTEXT_CLAIM; irq_hw_number_t hwirq; WARN_ON_ONCE(!handler->present); - csr_clear(CSR_IE, IE_EIE); + chained_irq_enter(chip, desc); + while ((hwirq = readl(claim))) { int irq = irq_find_mapping(handler->priv->irqdomain, hwirq); @@ -237,7 +241,8 @@ static void plic_handle_irq(struct pt_regs *regs) else generic_handle_irq(irq); } - csr_set(CSR_IE, IE_EIE); + + chained_irq_exit(chip, desc); } static void plic_set_threshold(struct plic_handler *handler, u32 threshold) @@ -248,10 +253,8 @@ static void plic_set_threshold(struct plic_handler *handler, u32 threshold) static int plic_dying_cpu(unsigned int cpu) { - struct plic_handler *handler = this_cpu_ptr(&plic_handlers); - - csr_clear(CSR_IE, IE_EIE); - plic_set_threshold(handler, PLIC_DISABLE_THRESHOLD); + if (plic_parent_irq) + disable_percpu_irq(plic_parent_irq); return 0; } @@ -260,7 +263,11 @@ static int plic_starting_cpu(unsigned int cpu) { struct plic_handler *handler = this_cpu_ptr(&plic_handlers); - csr_set(CSR_IE, IE_EIE); + if (plic_parent_irq) + enable_percpu_irq(plic_parent_irq, + irq_get_trigger_type(plic_parent_irq)); + else + pr_warn("cpu%d: parent irq not available\n", cpu); plic_set_threshold(handler, PLIC_ENABLE_THRESHOLD); return 0; @@ -328,6 +335,14 @@ static int __init plic_init(struct device_node *node, continue; } + /* Find parent domain and register chained handler */ + if (!plic_parent_irq && irq_find_host(parent.np)) { + plic_parent_irq = irq_of_parse_and_map(node, i); + if (plic_parent_irq) + irq_set_chained_handler(plic_parent_irq, + plic_handle_irq); + } + /* * When running in M-mode we need to ignore the S-mode handler. * Here we assume it always comes later, but that might be a @@ -368,7 +383,6 @@ done: pr_info("%pOFP: mapped %d interrupts with %d handlers for" " %d contexts.\n", node, nr_irqs, nr_handlers, nr_contexts); - set_handle_irq(plic_handle_irq); return 0; out_iounmap: diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 24b3a77810b6..0a13f8f23a64 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -102,6 +102,7 @@ enum cpuhp_state { CPUHP_AP_IRQ_ARMADA_XP_STARTING, CPUHP_AP_IRQ_BCM2836_STARTING, CPUHP_AP_IRQ_MIPS_GIC_STARTING, + CPUHP_AP_IRQ_RISCV_STARTING, CPUHP_AP_IRQ_SIFIVE_PLIC_STARTING, CPUHP_AP_ARM_MVEBU_COHERENCY, CPUHP_AP_MICROCODE_LOADER, |