summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/wireless/ti/wl12xx/main.c152
-rw-r--r--drivers/net/wireless/ti/wl18xx/io.c35
-rw-r--r--drivers/net/wireless/ti/wl18xx/io.h4
-rw-r--r--drivers/net/wireless/ti/wl18xx/main.c114
-rw-r--r--drivers/net/wireless/ti/wlcore/boot.c31
-rw-r--r--drivers/net/wireless/ti/wlcore/cmd.c9
-rw-r--r--drivers/net/wireless/ti/wlcore/io.h26
-rw-r--r--drivers/net/wireless/ti/wlcore/main.c47
-rw-r--r--drivers/net/wireless/ti/wlcore/wlcore.h4
9 files changed, 309 insertions, 113 deletions
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 257745fbdff9..ab486f71eee4 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -701,10 +701,11 @@ static void wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
}
-static u16 wl12xx_top_reg_read(struct wl1271 *wl, int addr)
+static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
{
u32 val;
int timeout = OCP_CMD_LOOP;
+ int ret;
/* write address >> 1 + 0x30000 to OCP_POR_CTR */
addr = (addr >> 1) + 0x30000;
@@ -715,29 +716,38 @@ static u16 wl12xx_top_reg_read(struct wl1271 *wl, int addr)
/* poll for data ready */
do {
- val = wl1271_read32(wl, WL12XX_OCP_DATA_READ);
+ ret = wlcore_read32(wl, WL12XX_OCP_DATA_READ, &val);
+ if (ret < 0)
+ return ret;
} while (!(val & OCP_READY_MASK) && --timeout);
if (!timeout) {
wl1271_warning("Top register access timed out.");
- return 0xffff;
+ return -ETIMEDOUT;
}
/* check data status and return if OK */
- if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
- return val & 0xffff;
- else {
+ if ((val & OCP_STATUS_MASK) != OCP_STATUS_OK) {
wl1271_warning("Top register access returned error.");
- return 0xffff;
+ return -EIO;
}
+
+ if (out)
+ *out = val & 0xffff;
+
+ return 0;
}
static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
{
u16 spare_reg;
+ int ret;
/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
- spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+ ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
+ if (ret < 0)
+ return ret;
+
if (spare_reg == 0xFFFF)
return -EFAULT;
spare_reg |= (BIT(3) | BIT(5) | BIT(6));
@@ -756,8 +766,12 @@ static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
{
u16 tcxo_detection;
+ int ret;
+
+ ret = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG, &tcxo_detection);
+ if (ret < 0)
+ return false;
- tcxo_detection = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG);
if (tcxo_detection & TCXO_DET_FAILED)
return false;
@@ -767,8 +781,12 @@ static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
static bool wl128x_is_fref_valid(struct wl1271 *wl)
{
u16 fref_detection;
+ int ret;
+
+ ret = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG, &fref_detection);
+ if (ret < 0)
+ return false;
- fref_detection = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG);
if (fref_detection & FREF_CLK_DETECT_FAIL)
return false;
@@ -790,9 +808,13 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
u16 pll_config;
u8 input_freq;
struct wl12xx_priv *priv = wl->priv;
+ int ret;
/* Mask bits [3:1] in the sys_clk_cfg register */
- spare_reg = wl12xx_top_reg_read(wl, WL_SPARE_REG);
+ ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg);
+ if (ret < 0)
+ return ret;
+
if (spare_reg == 0xFFFF)
return -EFAULT;
spare_reg |= BIT(2);
@@ -806,7 +828,10 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
/* Set the input frequency according to the selected clock source */
input_freq = (clk & 1) + 1;
- pll_config = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+ ret = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG, &pll_config);
+ if (ret < 0)
+ return ret;
+
if (pll_config == 0xFFFF)
return -EFAULT;
pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
@@ -827,6 +852,7 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
{
struct wl12xx_priv *priv = wl->priv;
u16 sys_clk_cfg;
+ int ret;
/* For XTAL-only modes, FREF will be used after switching from TCXO */
if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
@@ -837,7 +863,10 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
}
/* Query the HW, to determine which clock source we should use */
- sys_clk_cfg = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG);
+ ret = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG, &sys_clk_cfg);
+ if (ret < 0)
+ return ret;
+
if (sys_clk_cfg == 0xFFFF)
return -EINVAL;
if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
@@ -872,6 +901,7 @@ static int wl127x_boot_clk(struct wl1271 *wl)
struct wl12xx_priv *priv = wl->priv;
u32 pause;
u32 clk;
+ int ret;
if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
@@ -892,18 +922,27 @@ static int wl127x_boot_clk(struct wl1271 *wl)
if (priv->ref_clock != CONF_REF_CLK_19_2_E) {
u16 val;
/* Set clock type (open drain) */
- val = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE, &val);
+ if (ret < 0)
+ goto out;
+
val &= FREF_CLK_TYPE_BITS;
wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
/* Set clock pull mode (no pull) */
- val = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val);
+ if (ret < 0)
+ goto out;
+
val |= NO_PULL;
wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
} else {
u16 val;
/* Set clock polarity */
- val = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY, &val);
+ if (ret < 0)
+ goto out;
+
val &= FREF_CLK_POLARITY_BITS;
val |= CLK_REQ_OUTN_SEL;
wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
@@ -911,7 +950,9 @@ static int wl127x_boot_clk(struct wl1271 *wl)
wl1271_write32(wl, WL12XX_PLL_PARAMETERS, clk);
- pause = wl1271_read32(wl, WL12XX_PLL_PARAMETERS);
+ ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
@@ -919,13 +960,15 @@ static int wl127x_boot_clk(struct wl1271 *wl)
pause |= WU_COUNTER_PAUSE_VAL;
wl1271_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
- return 0;
+out:
+ return ret;
}
static int wl1271_boot_soft_reset(struct wl1271 *wl)
{
unsigned long timeout;
u32 boot_data;
+ int ret = 0;
/* perform soft reset */
wl1271_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
@@ -933,7 +976,10 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
/* SOFT_RESET is self clearing */
timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
while (1) {
- boot_data = wl1271_read32(wl, WL12XX_SLV_SOFT_RESET);
+ ret = wlcore_read32(wl, WL12XX_SLV_SOFT_RESET, &boot_data);
+ if (ret < 0)
+ goto out;
+
wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
break;
@@ -954,7 +1000,8 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
/* disable auto calibration on start*/
wl1271_write32(wl, WL12XX_SPARE_A2, 0xffff);
- return 0;
+out:
+ return ret;
}
static int wl12xx_pre_boot(struct wl1271 *wl)
@@ -984,7 +1031,9 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
to be used by DRPw FW. The RTRIM value will be added by the FW
before taking DRPw out of reset */
- clk = wl1271_read32(wl, WL12XX_DRPW_SCRATCH_START);
+ ret = wlcore_read32(wl, WL12XX_DRPW_SCRATCH_START, &clk);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
@@ -1008,9 +1057,11 @@ out:
return ret;
}
-static void wl12xx_pre_upload(struct wl1271 *wl)
+static int wl12xx_pre_upload(struct wl1271 *wl)
{
- u32 tmp, polarity;
+ u32 tmp;
+ u16 polarity;
+ int ret;
/* write firmware's last address (ie. it's length) to
* ACX_EEPROMLESS_IND_REG */
@@ -1018,12 +1069,16 @@ static void wl12xx_pre_upload(struct wl1271 *wl)
wl1271_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
- tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+ ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
/* 6. read the EEPROM parameters */
- tmp = wl1271_read32(wl, WL12XX_SCR_PAD2);
+ ret = wlcore_read32(wl, WL12XX_SCR_PAD2, &tmp);
+ if (ret < 0)
+ goto out;
/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
* to upload_fw) */
@@ -1032,12 +1087,16 @@ static void wl12xx_pre_upload(struct wl1271 *wl)
wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
/* polarity must be set before the firmware is loaded */
- polarity = wl12xx_top_reg_read(wl, OCP_REG_POLARITY);
+ ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity);
+ if (ret < 0)
+ goto out;
/* We use HIGH polarity, so unset the LOW bit */
polarity &= ~POLARITY_LOW;
wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
+out:
+ return ret;
}
static void wl12xx_enable_interrupts(struct wl1271 *wl)
@@ -1063,7 +1122,9 @@ static int wl12xx_boot(struct wl1271 *wl)
if (ret < 0)
goto out;
- wl12xx_pre_upload(wl);
+ ret = wl12xx_pre_upload(wl);
+ if (ret < 0)
+ goto out;
ret = wlcore_boot_upload_firmware(wl);
if (ret < 0)
@@ -1282,14 +1343,20 @@ static bool wl12xx_mac_in_fuse(struct wl1271 *wl)
return supported;
}
-static void wl12xx_get_fuse_mac(struct wl1271 *wl)
+static int wl12xx_get_fuse_mac(struct wl1271 *wl)
{
u32 mac1, mac2;
+ int ret;
wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
- mac1 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1);
- mac2 = wl1271_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2);
+ ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2, &mac2);
+ if (ret < 0)
+ goto out;
/* these are the two parts of the BD_ADDR */
wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
@@ -1297,24 +1364,35 @@ static void wl12xx_get_fuse_mac(struct wl1271 *wl)
wl->fuse_nic_addr = mac1 & 0xffffff;
wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+
+out:
+ return ret;
}
-static s8 wl12xx_get_pg_ver(struct wl1271 *wl)
+static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
{
- u32 die_info;
+ u16 die_info;
+ int ret;
if (wl->chip.id == CHIP_ID_1283_PG20)
- die_info = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1);
+ ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1,
+ &die_info);
else
- die_info = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1);
+ ret = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1,
+ &die_info);
- return (s8) (die_info & PG_VER_MASK) >> PG_VER_OFFSET;
+ if (ret >= 0 && ver)
+ *ver = (s8)((die_info & PG_VER_MASK) >> PG_VER_OFFSET);
+
+ return ret;
}
-static void wl12xx_get_mac(struct wl1271 *wl)
+static int wl12xx_get_mac(struct wl1271 *wl)
{
if (wl12xx_mac_in_fuse(wl))
- wl12xx_get_fuse_mac(wl);
+ return wl12xx_get_fuse_mac(wl);
+
+ return 0;
}
static void wl12xx_set_tx_desc_csum(struct wl1271 *wl,
diff --git a/drivers/net/wireless/ti/wl18xx/io.c b/drivers/net/wireless/ti/wl18xx/io.c
index 598c057e722b..92c2c03e4cd8 100644
--- a/drivers/net/wireless/ti/wl18xx/io.c
+++ b/drivers/net/wireless/ti/wl18xx/io.c
@@ -24,37 +24,52 @@
#include "io.h"
-void wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
{
u32 tmp;
+ int ret;
if (WARN_ON(addr % 2))
- return;
+ return -EINVAL;
if ((addr % 4) == 0) {
- tmp = wl1271_read32(wl, addr);
+ ret = wlcore_read32(wl, addr, &tmp);
+ if (ret < 0)
+ goto out;
+
tmp = (tmp & 0xffff0000) | val;
wl1271_write32(wl, addr, tmp);
} else {
- tmp = wl1271_read32(wl, addr - 2);
+ ret = wlcore_read32(wl, addr - 2, &tmp);
+ if (ret < 0)
+ goto out;
+
tmp = (tmp & 0xffff) | (val << 16);
wl1271_write32(wl, addr - 2, tmp);
}
+
+out:
+ return ret;
}
-u16 wl18xx_top_reg_read(struct wl1271 *wl, int addr)
+int wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
{
u32 val;
+ int ret;
if (WARN_ON(addr % 2))
- return 0;
+ return -EINVAL;
if ((addr % 4) == 0) {
/* address is 4-bytes aligned */
- val = wl1271_read32(wl, addr);
- return val & 0xffff;
+ ret = wlcore_read32(wl, addr, &val);
+ if (ret >= 0 && out)
+ *out = val & 0xffff;
} else {
- val = wl1271_read32(wl, addr - 2);
- return (val & 0xffff0000) >> 16;
+ ret = wlcore_read32(wl, addr - 2, &val);
+ if (ret >= 0 && out)
+ *out = (val & 0xffff0000) >> 16;
}
+
+ return ret;
}
diff --git a/drivers/net/wireless/ti/wl18xx/io.h b/drivers/net/wireless/ti/wl18xx/io.h
index be4e126ff617..0e1b8d28edb2 100644
--- a/drivers/net/wireless/ti/wl18xx/io.h
+++ b/drivers/net/wireless/ti/wl18xx/io.h
@@ -22,7 +22,7 @@
#ifndef __WL18XX_IO_H__
#define __WL18XX_IO_H__
-void wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-u16 wl18xx_top_reg_read(struct wl1271 *wl, int addr);
+int wl18xx_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+int wl18xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out);
#endif /* __WL18XX_IO_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 974a6ff11f6d..f99f003ab182 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -636,45 +636,67 @@ out:
return ret;
}
-static void wl18xx_set_clk(struct wl1271 *wl)
+static int wl18xx_set_clk(struct wl1271 *wl)
{
- u32 clk_freq;
+ u16 clk_freq;
+ int ret;
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
/* TODO: PG2: apparently we need to read the clk type */
- clk_freq = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT);
+ ret = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT, &clk_freq);
+ if (ret < 0)
+ goto out;
+
wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq,
wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m,
wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, wl18xx_clk_table[clk_freq].n);
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, wl18xx_clk_table[clk_freq].m);
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N,
+ wl18xx_clk_table[clk_freq].n);
+ if (ret < 0)
+ goto out;
+
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M,
+ wl18xx_clk_table[clk_freq].m);
+ if (ret < 0)
+ goto out;
if (wl18xx_clk_table[clk_freq].swallow) {
/* first the 16 lower bits */
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
- wl18xx_clk_table[clk_freq].q &
- PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1,
+ wl18xx_clk_table[clk_freq].q &
+ PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK);
+ if (ret < 0)
+ goto out;
+
/* then the 16 higher bits, masked out */
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
- (wl18xx_clk_table[clk_freq].q >> 16) &
- PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2,
+ (wl18xx_clk_table[clk_freq].q >> 16) &
+ PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK);
+ if (ret < 0)
+ goto out;
/* first the 16 lower bits */
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
- wl18xx_clk_table[clk_freq].p &
- PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1,
+ wl18xx_clk_table[clk_freq].p &
+ PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK);
+ if (ret < 0)
+ goto out;
+
/* then the 16 higher bits, masked out */
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
- (wl18xx_clk_table[clk_freq].p >> 16) &
- PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2,
+ (wl18xx_clk_table[clk_freq].p >> 16) &
+ PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK);
} else {
- wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
- PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
+ ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN,
+ PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
}
+
+out:
+ return ret;
}
static void wl18xx_boot_soft_reset(struct wl1271 *wl)
@@ -688,7 +710,11 @@ static void wl18xx_boot_soft_reset(struct wl1271 *wl)
static int wl18xx_pre_boot(struct wl1271 *wl)
{
- wl18xx_set_clk(wl);
+ int ret;
+
+ ret = wl18xx_set_clk(wl);
+ if (ret < 0)
+ goto out;
/* Continue the ELP wake up sequence */
wl1271_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
@@ -701,23 +727,30 @@ static int wl18xx_pre_boot(struct wl1271 *wl)
wl18xx_boot_soft_reset(wl);
- return 0;
+out:
+ return ret;
}
-static void wl18xx_pre_upload(struct wl1271 *wl)
+static int wl18xx_pre_upload(struct wl1271 *wl)
{
u32 tmp;
+ int ret;
wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
/* TODO: check if this is all needed */
wl1271_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
- tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+ ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
+ if (ret < 0)
+ goto out;
wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
- tmp = wl1271_read32(wl, WL18XX_SCR_PAD2);
+ ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp);
+
+out:
+ return ret;
}
static int wl18xx_set_mac_and_phy(struct wl1271 *wl)
@@ -766,7 +799,9 @@ static int wl18xx_boot(struct wl1271 *wl)
if (ret < 0)
goto out;
- wl18xx_pre_upload(wl);
+ ret = wl18xx_pre_upload(wl);
+ if (ret < 0)
+ goto out;
ret = wlcore_boot_upload_firmware(wl);
if (ret < 0)
@@ -998,18 +1033,24 @@ static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl,
}
}
-static s8 wl18xx_get_pg_ver(struct wl1271 *wl)
+static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
{
u32 fuse;
+ int ret;
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
- fuse = wl1271_read32(wl, WL18XX_REG_FUSE_DATA_1_3);
- fuse = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
+ ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse);
+ if (ret < 0)
+ goto out;
+
+ if (ver)
+ *ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
- return (s8)fuse;
+out:
+ return ret;
}
#define WL18XX_CONF_FILE_NAME "ti-connectivity/wl18xx-conf.bin"
@@ -1080,14 +1121,20 @@ static int wl18xx_plt_init(struct wl1271 *wl)
return wl->ops->boot(wl);
}
-static void wl18xx_get_mac(struct wl1271 *wl)
+static int wl18xx_get_mac(struct wl1271 *wl)
{
u32 mac1, mac2;
+ int ret;
wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
- mac1 = wl1271_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1);
- mac2 = wl1271_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2);
+ ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2, &mac2);
+ if (ret < 0)
+ goto out;
/* these are the two parts of the BD_ADDR */
wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) +
@@ -1095,6 +1142,9 @@ static void wl18xx_get_mac(struct wl1271 *wl)
wl->fuse_nic_addr = (mac1 & 0xffffff);
wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
+
+out:
+ return ret;
}
static int wl18xx_handle_static_data(struct wl1271 *wl,
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index ee7a401478a9..0aa0e29b8d98 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -33,16 +33,22 @@
#include "rx.h"
#include "hw_ops.h"
-static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
+static int wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
{
u32 cpu_ctrl;
+ int ret;
/* 10.5.0 run the firmware (I) */
- cpu_ctrl = wlcore_read_reg(wl, REG_ECPU_CONTROL);
+ ret = wlcore_read_reg(wl, REG_ECPU_CONTROL, &cpu_ctrl);
+ if (ret < 0)
+ goto out;
/* 10.5.1 run the firmware (II) */
cpu_ctrl |= flag;
wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
+
+out:
+ return ret;
}
static int wlcore_boot_parse_fw_ver(struct wl1271 *wl,
@@ -368,9 +374,13 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
/* Make sure we have the boot partition */
wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
- wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+ ret = wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+ if (ret < 0)
+ return ret;
- chip_id = wlcore_read_reg(wl, REG_CHIP_ID_B);
+ ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &chip_id);
+ if (ret < 0)
+ return ret;
wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
@@ -383,7 +393,9 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
loop = 0;
while (loop++ < INIT_LOOP) {
udelay(INIT_LOOP_DELAY);
- intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+ ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
+ if (ret < 0)
+ return ret;
if (intr == 0xffffffff) {
wl1271_error("error reading hardware complete "
@@ -405,12 +417,17 @@ int wlcore_boot_run_firmware(struct wl1271 *wl)
}
/* get hardware config command mail box */
- wl->cmd_box_addr = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR);
+ ret = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR, &wl->cmd_box_addr);
+ if (ret < 0)
+ return ret;
wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);
/* get hardware config event mail box */
- wl->mbox_ptr[0] = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR);
+ ret = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR, &wl->mbox_ptr[0]);
+ if (ret < 0)
+ return ret;
+
wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index 658dccbfd7ed..f2ac982a5cf5 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -79,7 +79,10 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
- intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+ ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
+ if (ret < 0)
+ goto fail;
+
while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
@@ -93,7 +96,9 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
else
msleep(1);
- intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
+ ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
+ if (ret < 0)
+ goto fail;
}
/* read back the status code of the command */
diff --git a/drivers/net/wireless/ti/wlcore/io.h b/drivers/net/wireless/ti/wlcore/io.h
index 2cbf7623ddbb..0395b030a4d6 100644
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -77,12 +77,19 @@ static inline int wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
return wlcore_raw_write(wl, wl->rtable[reg], buf, len, fixed);
}
-static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
+static inline int wlcore_raw_read32(struct wl1271 *wl, int addr, u32 *val)
{
- wlcore_raw_read(wl, addr, &wl->buffer_32,
- sizeof(wl->buffer_32), false);
+ int ret;
+
+ ret = wlcore_raw_read(wl, addr, &wl->buffer_32,
+ sizeof(wl->buffer_32), false);
+ if (ret < 0)
+ return ret;
+
+ if (val)
+ *val = le32_to_cpu(wl->buffer_32);
- return le32_to_cpu(wl->buffer_32);
+ return 0;
}
static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
@@ -138,9 +145,9 @@ static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
wlcore_raw_read(wl, physical, buf, len, fixed);
}
-static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
+static inline int wlcore_read32(struct wl1271 *wl, int addr, u32 *val)
{
- return wl1271_raw_read32(wl, wlcore_translate_addr(wl, addr));
+ return wlcore_raw_read32(wl, wlcore_translate_addr(wl, addr), val);
}
static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
@@ -148,10 +155,11 @@ static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
wl1271_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
}
-static inline u32 wlcore_read_reg(struct wl1271 *wl, int reg)
+static inline int wlcore_read_reg(struct wl1271 *wl, int reg, u32 *val)
{
- return wl1271_raw_read32(wl,
- wlcore_translate_addr(wl, wl->rtable[reg]));
+ return wlcore_raw_read32(wl,
+ wlcore_translate_addr(wl, wl->rtable[reg]),
+ val);
}
static inline void wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 0461d4eecfd2..c16d266ea6a2 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -872,6 +872,32 @@ out:
kfree(block);
}
+static void wlcore_print_recovery(struct wl1271 *wl)
+{
+ u32 pc = 0;
+ u32 hint_sts = 0;
+ int ret;
+
+ wl1271_info("Hardware recovery in progress. FW ver: %s",
+ wl->chip.fw_ver_str);
+
+ /* change partitions momentarily so we can read the FW pc */
+ wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+
+ ret = wlcore_read_reg(wl, REG_PC_ON_RECOVERY, &pc);
+ if (ret < 0)
+ return;
+
+ ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &hint_sts);
+ if (ret < 0)
+ return;
+
+ wl1271_info("pc: 0x%x, hint_sts: 0x%08x", pc, hint_sts);
+
+ wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+}
+
+
static void wl1271_recovery_work(struct work_struct *work)
{
struct wl1271 *wl =
@@ -886,14 +912,7 @@ static void wl1271_recovery_work(struct work_struct *work)
wl12xx_read_fwlog_panic(wl);
- /* change partitions momentarily so we can read the FW pc */
- wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
- wl1271_info("Hardware recovery in progress. FW ver: %s pc: 0x%x "
- "hint_sts: 0x%08x",
- wl->chip.fw_ver_str,
- wlcore_read_reg(wl, REG_PC_ON_RECOVERY),
- wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR));
- wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
+ wlcore_print_recovery(wl);
BUG_ON(bug_on_recovery &&
!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
@@ -4979,18 +4998,22 @@ static int wl12xx_get_hw_info(struct wl1271 *wl)
if (ret < 0)
goto out;
- wl->chip.id = wlcore_read_reg(wl, REG_CHIP_ID_B);
+ ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &wl->chip.id);
+ if (ret < 0)
+ goto out;
wl->fuse_oui_addr = 0;
wl->fuse_nic_addr = 0;
- wl->hw_pg_ver = wl->ops->get_pg_ver(wl);
+ ret = wl->ops->get_pg_ver(wl, &wl->hw_pg_ver);
+ if (ret < 0)
+ goto out;
if (wl->ops->get_mac)
- wl->ops->get_mac(wl);
+ ret = wl->ops->get_mac(wl);
- wl1271_power_off(wl);
out:
+ wl1271_power_off(wl);
return ret;
}
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 5d51647e6154..2fb537478ba4 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -62,8 +62,8 @@ struct wlcore_ops {
int (*init_vif)(struct wl1271 *wl, struct wl12xx_vif *wlvif);
u32 (*sta_get_ap_rate_mask)(struct wl1271 *wl,
struct wl12xx_vif *wlvif);
- s8 (*get_pg_ver)(struct wl1271 *wl);
- void (*get_mac)(struct wl1271 *wl);
+ int (*get_pg_ver)(struct wl1271 *wl, s8 *ver);
+ int (*get_mac)(struct wl1271 *wl);
void (*set_tx_desc_csum)(struct wl1271 *wl,
struct wl1271_tx_hw_descr *desc,
struct sk_buff *skb);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:42:48 +0000