diff options
| -rw-r--r-- | drivers/staging/winbond/mds_s.h | 173 |
1 files changed, 86 insertions, 87 deletions
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h index 217ff0819a93..89328c5dbdad 100644 --- a/drivers/staging/winbond/mds_s.h +++ b/drivers/staging/winbond/mds_s.h @@ -15,122 +15,121 @@ enum { WLAN_PREAMBLE_TYPE_LONG, }; -//////////////////////////////////////////////////////////////////////////////////////////////////////// -#define MAX_USB_TX_DESCRIPTOR 15 // IS89C35 ability -#define MAX_USB_TX_BUFFER_NUMBER 4 // Virtual pre-buffer number of MAX_USB_TX_BUFFER -#define MAX_USB_TX_BUFFER 4096 // IS89C35 ability 4n alignment is required for hardware +/*****************************************************************************/ +#define MAX_USB_TX_DESCRIPTOR 15 /* IS89C35 ability */ +#define MAX_USB_TX_BUFFER_NUMBER 4 /* Virtual pre-buffer number of MAX_USB_TX_BUFFER */ +#define MAX_USB_TX_BUFFER 4096 /* IS89C35 ability 4n alignment is required for hardware */ -#define AUTH_REQUEST_PAIRWISE_ERROR 0 // _F flag setting -#define AUTH_REQUEST_GROUP_ERROR 1 // _F flag setting +#define AUTH_REQUEST_PAIRWISE_ERROR 0 /* _F flag setting */ +#define AUTH_REQUEST_GROUP_ERROR 1 /* _F flag setting */ -#define CURRENT_FRAGMENT_THRESHOLD (adapter->Mds.TxFragmentThreshold & ~0x1) -#define CURRENT_PREAMBLE_MODE psLOCAL->boShortPreamble?WLAN_PREAMBLE_TYPE_SHORT:WLAN_PREAMBLE_TYPE_LONG -#define CURRENT_TX_RATE_FOR_MNG adapter->sLocalPara.CurrentTxRateForMng -#define CURRENT_PROTECT_MECHANISM psLOCAL->boProtectMechanism -#define CURRENT_RTS_THRESHOLD adapter->Mds.TxRTSThreshold +#define CURRENT_FRAGMENT_THRESHOLD (adapter->Mds.TxFragmentThreshold & ~0x1) +#define CURRENT_PREAMBLE_MODE (psLOCAL->boShortPreamble ? WLAN_PREAMBLE_TYPE_SHORT : WLAN_PREAMBLE_TYPE_LONG) +#define CURRENT_TX_RATE_FOR_MNG (adapter->sLocalPara.CurrentTxRateForMng) +#define CURRENT_PROTECT_MECHANISM (psLOCAL->boProtectMechanism) +#define CURRENT_RTS_THRESHOLD (adapter->Mds.TxRTSThreshold) -#define MIB_GS_XMIT_OK_INC adapter->sLocalPara.GS_XMIT_OK++ -#define MIB_GS_RCV_OK_INC adapter->sLocalPara.GS_RCV_OK++ -#define MIB_GS_XMIT_ERROR_INC adapter->sLocalPara.GS_XMIT_ERROR +#define MIB_GS_XMIT_OK_INC (adapter->sLocalPara.GS_XMIT_OK++) +#define MIB_GS_RCV_OK_INC (adapter->sLocalPara.GS_RCV_OK++) +#define MIB_GS_XMIT_ERROR_INC (adapter->sLocalPara.GS_XMIT_ERROR) -//---------- TX ----------------------------------- +/* ---------- TX ----------------------------------- */ #define ETHERNET_TX_DESCRIPTORS MAX_USB_TX_BUFFER_NUMBER -//---------- RX ------------------------------------ -#define ETHERNET_RX_DESCRIPTORS 8 //It's not necessary to allocate more than 2 in sync indicate - -//================================================================ -// Configration default value -//================================================================ -#define DEFAULT_MULTICASTLISTMAX 32 // standard -#define DEFAULT_TX_BURSTLENGTH 3 // 32 Longwords -#define DEFAULT_RX_BURSTLENGTH 3 // 32 Longwords -#define DEFAULT_TX_THRESHOLD 0 // Full Packet -#define DEFAULT_RX_THRESHOLD 0 // Full Packet -#define DEFAULT_MAXTXRATE 6 // 11 Mbps (Long) -#define DEFAULT_CHANNEL 3 // Chennel 3 -#define DEFAULT_RTSThreshold 2347 // Disable RTS -//#define DEFAULT_PME 1 // Enable -#define DEFAULT_PME 0 // Disable -#define DEFAULT_SIFSTIME 10 -#define DEFAULT_ACKTIME_1ML 304 // 148+44+112 911220 by LCC -#define DEFAULT_ACKTIME_2ML 248 // 148+44+56 911220 by LCC -#define DEFAULT_FRAGMENT_THRESHOLD 2346 // No fragment -#define DEFAULT_PREAMBLE_LENGTH 72 +/* ---------- RX ----------------------------------- */ +#define ETHERNET_RX_DESCRIPTORS 8 /* It's not necessary to allocate more than 2 in sync indicate */ + +/* + * ================================================================ + * Configration default value + * ================================================================ + */ +#define DEFAULT_MULTICASTLISTMAX 32 /* standard */ +#define DEFAULT_TX_BURSTLENGTH 3 /* 32 Longwords */ +#define DEFAULT_RX_BURSTLENGTH 3 /* 32 Longwords */ +#define DEFAULT_TX_THRESHOLD 0 /* Full Packet */ +#define DEFAULT_RX_THRESHOLD 0 /* Full Packet */ +#define DEFAULT_MAXTXRATE 6 /* 11 Mbps (Long) */ +#define DEFAULT_CHANNEL 3 /* Chennel 3 */ +#define DEFAULT_RTSThreshold 2347 /* Disable RTS */ +#define DEFAULT_PME 0 /* Disable */ +#define DEFAULT_SIFSTIME 10 +#define DEFAULT_ACKTIME_1ML 304 /* 148 + 44 + 112 */ +#define DEFAULT_ACKTIME_2ML 248 /* 148 + 44 + 56 */ +#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */ +#define DEFAULT_PREAMBLE_LENGTH 72 #define DEFAULT_PLCPHEADERTIME_LENGTH 24 -/*------------------------------------------------------------------------ - 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns - instead of 960 ns. This shall be fixed in the future W89C32 - -------------------------------------------------------------------------*/ -#define DEFAULT_MAX_RECEIVE_TIME 16440000 +/* + * ------------------------------------------------------------------------ + * 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns + * instead of 960 ns. This shall be fixed in the future W89C32 + * ------------------------------------------------------------------------- + */ +#define DEFAULT_MAX_RECEIVE_TIME 16440000 -#define RX_BUF_SIZE 2352 // 600 // For 301 must be multiple of 8 -#define MAX_RX_DESCRIPTORS 18 // Rx Layer 2 +#define RX_BUF_SIZE 2352 /* 600 - For 301 must be multiple of 8 */ +#define MAX_RX_DESCRIPTORS 18 /* Rx Layer 2 */ +/* For brand-new rx system */ +#define MDS_ID_IGNORE ETHERNET_RX_DESCRIPTORS -// For brand-new rx system -#define MDS_ID_IGNORE ETHERNET_RX_DESCRIPTORS - -// For Tx Packet status classify -#define PACKET_FREE_TO_USE 0 -#define PACKET_COME_FROM_NDIS 0x08 -#define PACKET_COME_FROM_MLME 0x80 -#define PACKET_SEND_COMPLETE 0xff +/* For Tx Packet status classify */ +#define PACKET_FREE_TO_USE 0 +#define PACKET_COME_FROM_NDIS 0x08 +#define PACKET_COME_FROM_MLME 0x80 +#define PACKET_SEND_COMPLETE 0xff struct wb35_mds { - // For Tx usage - u8 TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ]; + /* For Tx usage */ + u8 TxOwner[((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03)]; u8 *pTxBuffer; - u16 TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ]; - u8 TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data - u8 TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928 + u16 TxBufferSize[((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01)]; + u8 TxDesFrom[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];/* 1: MLME 2: NDIS control 3: NDIS data */ + u8 TxCountInBuffer[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)]; - u8 TxFillIndex;//the next index of TxBuffer can be used - u8 TxDesIndex;//The next index of TxDes can be used - u8 ScanTxPause; //data Tx pause because the scanning is progressing, but probe request Tx won't. - u8 TxPause;//For pause the Mds_Tx modult + u8 TxFillIndex; /* the next index of TxBuffer can be used */ + u8 TxDesIndex; /* The next index of TxDes can be used */ + u8 ScanTxPause; /* data Tx pause because the scanning is progressing, but probe request Tx won't. */ + u8 TxPause; /*For pause the Mds_Tx modult */ - atomic_t TxThreadCount;//For thread counting 931130.4.v -//950301 delete due to HW -// atomic_t TxConcurrentCount;//931130.4.w + atomic_t TxThreadCount; /* For thread counting */ - u16 TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu + u16 TxResult[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)];/* Collect the sending result of Mpdu */ - u8 MicRedundant[8]; // For tmp use - u8 *MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment + u8 MicRedundant[8]; /* For tmp use */ + u8 *MicWriteAddress[2]; /* The start address to fill the Mic, use 2 point due to Mic maybe fragment */ - u16 MicWriteSize[2]; //931130.4.x + u16 MicWriteSize[2]; - u16 MicAdd; // If want to add the Mic, this variable equal to 8 - u16 MicWriteIndex;//The number of MicWriteAddress 931130.4.y + u16 MicAdd; /* If want to add the Mic, this variable equal to 8 */ + u16 MicWriteIndex; /* The number of MicWriteAddress */ - u8 TxRate[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ][2]; // [0] current tx rate, [1] fall back rate - u8 TxInfo[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ]; //Store information for callback function + u8 TxRate[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)][2]; /* [0] current tx rate, [1] fall back rate */ + u8 TxInfo[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)]; /*Store information for callback function */ - //WKCHEN added for scanning mechanism - u8 TxToggle; //It is TRUE if there are tx activities in some time interval + /* for scanning mechanism */ + u8 TxToggle; /* It is TRUE if there are tx activities in some time interval */ u8 Reserved_[3]; - //---------- for Tx Parameter - u16 TxFragmentThreshold; // For frame body only + /* ---- for Tx Parameter */ + u16 TxFragmentThreshold; /* For frame body only */ u16 TxRTSThreshold; - u32 MaxReceiveTime;//911220.3 Add - - // depend on OS, - u32 MulticastListNo; - u32 PacketFilter; // Setting by NDIS, the current packet filter in use. - u8 MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH]; + u32 MaxReceiveTime; - //COUNTERMEASURE - u8 bMICfailCount; - u8 boCounterMeasureBlock; - u8 reserved_4[2]; + /* depend on OS, */ + u32 MulticastListNo; + u32 PacketFilter; /* Setting by NDIS, the current packet filter in use. */ + u8 MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH]; - u32 TxTsc; // 20060214 - u32 TxTsc_2; // 20060214 + /* COUNTERMEASURE */ + u8 bMICfailCount; + u8 boCounterMeasureBlock; + u8 reserved_4[2]; + u32 TxTsc; + u32 TxTsc_2; }; #endif |