diff options
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 9 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 34 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 11 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_vport.c | 3 |
4 files changed, 44 insertions, 13 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5cb08ae3e8c2..9937e572efdb 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2591,9 +2591,12 @@ LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, /* # lun_queue_depth: This parameter is used to limit the number of outstanding -# commands per FCP LUN. Value range is [1,128]. Default value is 30. +# commands per FCP LUN. Value range is [1,512]. Default value is 30. +# If this parameter value is greater than 1/8th the maximum number of exchanges +# supported by the HBA port, then the lun queue depth will be reduced to +# 1/8th the maximum number of exchanges. */ -LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128, +LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512, "Max number of FCP commands we can queue to a specific LUN"); /* @@ -2601,7 +2604,7 @@ LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 128, # commands per target port. Value range is [10,65535]. Default value is 65535. */ LPFC_VPORT_ATTR_R(tgt_queue_depth, 65535, 10, 65535, - "Max number of FCP commands we can queue to a specific target port"); + "Max number of FCP commands we can queue to a specific target port"); /* # hba_queue_depth: This parameter is used to limit the number of outstanding diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e0b20fad8502..a7f3328424f8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -472,10 +472,22 @@ lpfc_config_port_post(struct lpfc_hba *phba) lpfc_sli_read_link_ste(phba); /* Reset the DFT_HBA_Q_DEPTH to the max xri */ - if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1)) - phba->cfg_hba_queue_depth = - (mb->un.varRdConfig.max_xri + 1) - - lpfc_sli4_get_els_iocb_cnt(phba); + i = (mb->un.varRdConfig.max_xri + 1); + if (phba->cfg_hba_queue_depth > i) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "3359 HBA queue depth changed from %d to %d\n", + phba->cfg_hba_queue_depth, i); + phba->cfg_hba_queue_depth = i; + } + + /* Reset the DFT_LUN_Q_DEPTH to (max xri >> 3) */ + i = (mb->un.varRdConfig.max_xri >> 3); + if (phba->pport->cfg_lun_queue_depth > i) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "3360 LUN queue depth changed from %d to %d\n", + phba->pport->cfg_lun_queue_depth, i); + phba->pport->cfg_lun_queue_depth = i; + } phba->lmt = mb->un.varRdConfig.lmt; @@ -6664,12 +6676,14 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) goto read_cfg_out; /* Reset the DFT_HBA_Q_DEPTH to the max xri */ - if (phba->cfg_hba_queue_depth > - (phba->sli4_hba.max_cfg_param.max_xri - - lpfc_sli4_get_els_iocb_cnt(phba))) - phba->cfg_hba_queue_depth = - phba->sli4_hba.max_cfg_param.max_xri - - lpfc_sli4_get_els_iocb_cnt(phba); + length = phba->sli4_hba.max_cfg_param.max_xri - + lpfc_sli4_get_els_iocb_cnt(phba); + if (phba->cfg_hba_queue_depth > length) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "3361 HBA queue depth changed from %d to %d\n", + phba->cfg_hba_queue_depth, length); + phba->cfg_hba_queue_depth = length; + } if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_2) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 230f9eddb797..a4e3f4757405 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -6163,6 +6163,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) kfree(vpd); goto out_free_mbox; } + mqe = &mboxq->u.mqe; phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev); if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev)) @@ -6249,6 +6250,16 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) phba->vpd.rev.fcphHigh, phba->vpd.rev.fcphLow, phba->vpd.rev.feaLevelHigh, phba->vpd.rev.feaLevelLow); + /* Reset the DFT_LUN_Q_DEPTH to (max xri >> 3) */ + rc = (phba->sli4_hba.max_cfg_param.max_xri >> 3); + if (phba->pport->cfg_lun_queue_depth > rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "3362 LUN queue depth changed from %d to %d\n", + phba->pport->cfg_lun_queue_depth, rc); + phba->pport->cfg_lun_queue_depth = rc; + } + + /* * Discover the port's supported feature set and match it against the * hosts requests. diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index e28e431564b0..6b9f9bdb6c98 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -387,6 +387,9 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable) /* Create binary sysfs attribute for vport */ lpfc_alloc_sysfs_attr(vport); + /* Set the DFT_LUN_Q_DEPTH accordingly */ + vport->cfg_lun_queue_depth = phba->pport->cfg_lun_queue_depth; + *(struct lpfc_vport **)fc_vport->dd_data = vport; vport->fc_vport = fc_vport; |