diff options
-rw-r--r-- | Documentation/devicetree/bindings/mips/mscc.txt | 16 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/net/mscc-ocelot.txt | 9 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt | 43 | ||||
-rw-r--r-- | arch/mips/boot/dts/mscc/ocelot.dtsi | 19 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot.c | 16 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot.h | 79 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot_board.c | 61 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot_regs.c | 93 | ||||
-rw-r--r-- | drivers/phy/Kconfig | 1 | ||||
-rw-r--r-- | drivers/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/mscc/Kconfig | 11 | ||||
-rw-r--r-- | drivers/phy/mscc/Makefile | 5 | ||||
-rw-r--r-- | drivers/phy/mscc/phy-ocelot-serdes.c | 295 | ||||
-rw-r--r-- | include/dt-bindings/phy/phy-ocelot-serdes.h | 12 | ||||
-rw-r--r-- | include/linux/phy/phy.h | 2 | ||||
-rw-r--r-- | include/soc/mscc/ocelot_hsio.h (renamed from drivers/net/ethernet/mscc/ocelot_hsio.h) | 74 |
17 files changed, 559 insertions, 180 deletions
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt index ae15ec333542..bc817e984628 100644 --- a/Documentation/devicetree/bindings/mips/mscc.txt +++ b/Documentation/devicetree/bindings/mips/mscc.txt @@ -41,3 +41,19 @@ Example: compatible = "mscc,ocelot-cpu-syscon", "syscon"; reg = <0x70000000 0x2c>; }; + +o HSIO regs: + +The SoC has a few registers (HSIO) handling miscellaneous functionalities: +configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and +status, SerDes muxing and a thermal sensor. + +Required properties: +- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd" +- reg : Should contain registers location and length + +Example: + syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt index 0a84711abece..9e5c17d426ce 100644 --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt +++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt @@ -12,7 +12,6 @@ Required properties: - "sys" - "rew" - "qs" - - "hsio" - "qsys" - "ana" - "portX" with X from 0 to the number of last port index available on that @@ -45,7 +44,6 @@ Example: reg = <0x1010000 0x10000>, <0x1030000 0x10000>, <0x1080000 0x100>, - <0x10d0000 0x10000>, <0x11e0000 0x100>, <0x11f0000 0x100>, <0x1200000 0x100>, @@ -59,10 +57,9 @@ Example: <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "hsio", "port0", - "port1", "port2", "port3", "port4", "port5", - "port6", "port7", "port8", "port9", "port10", - "qsys", "ana"; + reg-names = "sys", "rew", "qs", "port0", "port1", "port2", + "port3", "port4", "port5", "port6", "port7", + "port8", "port9", "port10", "qsys", "ana"; interrupts = <21 22>; interrupt-names = "xtr", "inj"; diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt new file mode 100644 index 000000000000..332219860187 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt @@ -0,0 +1,43 @@ +Microsemi Ocelot SerDes muxing driver +------------------------------------- + +On Microsemi Ocelot, there is a handful of registers in HSIO address +space for setting up the SerDes to switch port muxing. + +A SerDes X can be "muxed" to work with switch port Y or Z for example. +One specific SerDes can also be used as a PCIe interface. + +Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one. + +There are two kinds of SerDes: SERDES1G supports 10/100Mbps in +half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports +10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode. + +Also, SERDES6G number (aka "macro") 0 is the only interface supporting +QSGMII. + +This is a child of the HSIO syscon ("mscc,ocelot-hsio", see +Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot. + +Required properties: + +- compatible: should be "mscc,vsc7514-serdes" +- #phy-cells : from the generic phy bindings, must be 2. + The first number defines the input port to use for a given + SerDes macro. The second defines the macro to use. They are + defined in dt-bindings/phy/phy-ocelot-serdes.h + +Example: + + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; + + ethernet { + port1 { + phy-handle = <&phy_foo>; + /* Link SERDES1G_5 to port1 */ + phys = <&serdes 1 SERDES1G_5>; + }; + }; diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index f7eb612b46ba..8ce317c5b9ed 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -107,7 +107,6 @@ reg = <0x1010000 0x10000>, <0x1030000 0x10000>, <0x1080000 0x100>, - <0x10d0000 0x10000>, <0x11e0000 0x100>, <0x11f0000 0x100>, <0x1200000 0x100>, @@ -121,10 +120,10 @@ <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "hsio", "port0", - "port1", "port2", "port3", "port4", "port5", - "port6", "port7", "port8", "port9", "port10", - "qsys", "ana"; + reg-names = "sys", "rew", "qs", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana"; interrupts = <21 22>; interrupt-names = "xtr", "inj"; @@ -231,5 +230,15 @@ pinctrl-0 = <&miim1>; status = "disabled"; }; + + hsio: syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; + }; }; }; diff --git a/drivers/net/ethernet/mscc/Kconfig b/drivers/net/ethernet/mscc/Kconfig index 36c84625d54e..bcec0587cf61 100644 --- a/drivers/net/ethernet/mscc/Kconfig +++ b/drivers/net/ethernet/mscc/Kconfig @@ -23,6 +23,8 @@ config MSCC_OCELOT_SWITCH config MSCC_OCELOT_SWITCH_OCELOT tristate "Ocelot switch driver on Ocelot" depends on MSCC_OCELOT_SWITCH + depends on GENERIC_PHY + depends on OF_NET help This driver supports the Ocelot network switch device as present on the Ocelot SoCs. diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 1a4f2bb48ead..8f11fdba8d0e 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -472,6 +472,7 @@ static int ocelot_port_open(struct net_device *dev) { struct ocelot_port *port = netdev_priv(dev); struct ocelot *ocelot = port->ocelot; + enum phy_mode phy_mode; int err; /* Enable receiving frames on the port, and activate auto-learning of @@ -482,8 +483,21 @@ static int ocelot_port_open(struct net_device *dev) ANA_PORT_PORT_CFG_PORTID_VAL(port->chip_port), ANA_PORT_PORT_CFG, port->chip_port); + if (port->serdes) { + if (port->phy_mode == PHY_INTERFACE_MODE_SGMII) + phy_mode = PHY_MODE_SGMII; + else + phy_mode = PHY_MODE_QSGMII; + + err = phy_set_mode(port->serdes, phy_mode); + if (err) { + netdev_err(dev, "Could not set mode of SerDes\n"); + return err; + } + } + err = phy_connect_direct(dev, port->phy, &ocelot_port_adjust_link, - PHY_INTERFACE_MODE_NA); + port->phy_mode); if (err) { netdev_err(dev, "Could not attach to PHY\n"); return err; diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h index 616bec30dfa3..62c7c8eb00d9 100644 --- a/drivers/net/ethernet/mscc/ocelot.h +++ b/drivers/net/ethernet/mscc/ocelot.h @@ -11,12 +11,13 @@ #include <linux/bitops.h> #include <linux/etherdevice.h> #include <linux/if_vlan.h> +#include <linux/phy.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include "ocelot_ana.h" #include "ocelot_dev.h" -#include "ocelot_hsio.h" #include "ocelot_qsys.h" #include "ocelot_rew.h" #include "ocelot_sys.h" @@ -333,79 +334,6 @@ enum ocelot_reg { SYS_CM_DATA_RD, SYS_CM_OP, SYS_CM_DATA, - HSIO_PLL5G_CFG0 = HSIO << TARGET_OFFSET, - HSIO_PLL5G_CFG1, - HSIO_PLL5G_CFG2, - HSIO_PLL5G_CFG3, - HSIO_PLL5G_CFG4, - HSIO_PLL5G_CFG5, - HSIO_PLL5G_CFG6, - HSIO_PLL5G_STATUS0, - HSIO_PLL5G_STATUS1, - HSIO_PLL5G_BIST_CFG0, - HSIO_PLL5G_BIST_CFG1, - HSIO_PLL5G_BIST_CFG2, - HSIO_PLL5G_BIST_STAT0, - HSIO_PLL5G_BIST_STAT1, - HSIO_RCOMP_CFG0, - HSIO_RCOMP_STATUS, - HSIO_SYNC_ETH_CFG, - HSIO_SYNC_ETH_PLL_CFG, - HSIO_S1G_DES_CFG, - HSIO_S1G_IB_CFG, - HSIO_S1G_OB_CFG, - HSIO_S1G_SER_CFG, - HSIO_S1G_COMMON_CFG, - HSIO_S1G_PLL_CFG, - HSIO_S1G_PLL_STATUS, - HSIO_S1G_DFT_CFG0, - HSIO_S1G_DFT_CFG1, - HSIO_S1G_DFT_CFG2, - HSIO_S1G_TP_CFG, - HSIO_S1G_RC_PLL_BIST_CFG, - HSIO_S1G_MISC_CFG, - HSIO_S1G_DFT_STATUS, - HSIO_S1G_MISC_STATUS, - HSIO_MCB_S1G_ADDR_CFG, - HSIO_S6G_DIG_CFG, - HSIO_S6G_DFT_CFG0, - HSIO_S6G_DFT_CFG1, - HSIO_S6G_DFT_CFG2, - HSIO_S6G_TP_CFG0, - HSIO_S6G_TP_CFG1, - HSIO_S6G_RC_PLL_BIST_CFG, - HSIO_S6G_MISC_CFG, - HSIO_S6G_OB_ANEG_CFG, - HSIO_S6G_DFT_STATUS, - HSIO_S6G_ERR_CNT, - HSIO_S6G_MISC_STATUS, - HSIO_S6G_DES_CFG, - HSIO_S6G_IB_CFG, - HSIO_S6G_IB_CFG1, - HSIO_S6G_IB_CFG2, - HSIO_S6G_IB_CFG3, - HSIO_S6G_IB_CFG4, - HSIO_S6G_IB_CFG5, - HSIO_S6G_OB_CFG, - HSIO_S6G_OB_CFG1, - HSIO_S6G_SER_CFG, - HSIO_S6G_COMMON_CFG, - HSIO_S6G_PLL_CFG, - HSIO_S6G_ACJTAG_CFG, - HSIO_S6G_GP_CFG, - HSIO_S6G_IB_STATUS0, - HSIO_S6G_IB_STATUS1, - HSIO_S6G_ACJTAG_STATUS, - HSIO_S6G_PLL_STATUS, - HSIO_S6G_REVID, - HSIO_MCB_S6G_ADDR_CFG, - HSIO_HW_CFG, - HSIO_HW_QSGMII_CFG, - HSIO_HW_QSGMII_STAT, - HSIO_CLK_CFG, - HSIO_TEMP_SENSOR_CTRL, - HSIO_TEMP_SENSOR_CFG, - HSIO_TEMP_SENSOR_STAT, }; enum ocelot_regfield { @@ -527,6 +455,9 @@ struct ocelot_port { u8 vlan_aware; u64 *stats; + + phy_interface_t phy_mode; + struct phy *serdes; }; u32 __ocelot_read_ix(struct ocelot *ocelot, u32 reg, u32 offset); diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c index 3cdf63e35b53..953b32677383 100644 --- a/drivers/net/ethernet/mscc/ocelot_board.c +++ b/drivers/net/ethernet/mscc/ocelot_board.c @@ -6,9 +6,11 @@ */ #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/of_net.h> #include <linux/netdevice.h> #include <linux/of_mdio.h> #include <linux/of_platform.h> +#include <linux/mfd/syscon.h> #include <linux/skbuff.h> #include "ocelot.h" @@ -168,6 +170,7 @@ static int mscc_ocelot_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct device_node *ports, *portnp; struct ocelot *ocelot; + struct regmap *hsio; u32 val; struct { @@ -179,7 +182,6 @@ static int mscc_ocelot_probe(struct platform_device *pdev) { QSYS, "qsys" }, { ANA, "ana" }, { QS, "qs" }, - { HSIO, "hsio" }, }; if (!np && !pdev->dev.platform_data) @@ -202,6 +204,14 @@ static int mscc_ocelot_probe(struct platform_device *pdev) ocelot->targets[res[i].id] = target; } + hsio = syscon_regmap_lookup_by_compatible("mscc,ocelot-hsio"); + if (IS_ERR(hsio)) { + dev_err(&pdev->dev, "missing hsio syscon\n"); + return PTR_ERR(hsio); + } + + ocelot->targets[HSIO] = hsio; + err = ocelot_chip_init(ocelot); if (err) return err; @@ -244,18 +254,12 @@ static int mscc_ocelot_probe(struct platform_device *pdev) INIT_LIST_HEAD(&ocelot->multicast); ocelot_init(ocelot); - ocelot_rmw(ocelot, HSIO_HW_CFG_DEV1G_4_MODE | - HSIO_HW_CFG_DEV1G_6_MODE | - HSIO_HW_CFG_DEV1G_9_MODE, - HSIO_HW_CFG_DEV1G_4_MODE | - HSIO_HW_CFG_DEV1G_6_MODE | - HSIO_HW_CFG_DEV1G_9_MODE, - HSIO_HW_CFG); - for_each_available_child_of_node(ports, portnp) { struct device_node *phy_node; struct phy_device *phy; struct resource *res; + struct phy *serdes; + enum phy_mode phy_mode; void __iomem *regs; char res_name[8]; u32 port; @@ -280,10 +284,45 @@ static int mscc_ocelot_probe(struct platform_device *pdev) continue; err = ocelot_probe_port(ocelot, port, regs, phy); - if (err) { - dev_err(&pdev->dev, "failed to probe ports\n"); + if (err) + return err; + + err = of_get_phy_mode(portnp); + if (err < 0) + ocelot->ports[port]->phy_mode = PHY_INTERFACE_MODE_NA; + else + ocelot->ports[port]->phy_mode = err; + + switch (ocelot->ports[port]->phy_mode) { + case PHY_INTERFACE_MODE_NA: + continue; + case PHY_INTERFACE_MODE_SGMII: + phy_mode = PHY_MODE_SGMII; + break; + case PHY_INTERFACE_MODE_QSGMII: + phy_mode = PHY_MODE_QSGMII; + break; + default: + dev_err(ocelot->dev, + "invalid phy mode for port%d, (Q)SGMII only\n", + port); + return -EINVAL; + } + + serdes = devm_of_phy_get(ocelot->dev, portnp, NULL); + if (IS_ERR(serdes)) { + err = PTR_ERR(serdes); + if (err == -EPROBE_DEFER) + dev_dbg(ocelot->dev, "deferring probe\n"); + else + dev_err(ocelot->dev, + "missing SerDes phys for port%d\n", + port); + goto err_probe_ports; } + + ocelot->ports[port]->serdes = serdes; } register_netdevice_notifier(&ocelot_netdevice_nb); diff --git a/drivers/net/ethernet/mscc/ocelot_regs.c b/drivers/net/ethernet/mscc/ocelot_regs.c index e334b406c40c..9271af18b93b 100644 --- a/drivers/net/ethernet/mscc/ocelot_regs.c +++ b/drivers/net/ethernet/mscc/ocelot_regs.c @@ -5,6 +5,7 @@ * Copyright (c) 2017 Microsemi Corporation */ #include "ocelot.h" +#include <soc/mscc/ocelot_hsio.h> static const u32 ocelot_ana_regmap[] = { REG(ANA_ADVLEARN, 0x009000), @@ -102,82 +103,6 @@ static const u32 ocelot_qs_regmap[] = { REG(QS_INH_DBG, 0x000048), }; -static const u32 ocelot_hsio_regmap[] = { - REG(HSIO_PLL5G_CFG0, 0x000000), - REG(HSIO_PLL5G_CFG1, 0x000004), - REG(HSIO_PLL5G_CFG2, 0x000008), - REG(HSIO_PLL5G_CFG3, 0x00000c), - REG(HSIO_PLL5G_CFG4, 0x000010), - REG(HSIO_PLL5G_CFG5, 0x000014), - REG(HSIO_PLL5G_CFG6, 0x000018), - REG(HSIO_PLL5G_STATUS0, 0x00001c), - REG(HSIO_PLL5G_STATUS1, 0x000020), - REG(HSIO_PLL5G_BIST_CFG0, 0x000024), - REG(HSIO_PLL5G_BIST_CFG1, 0x000028), - REG(HSIO_PLL5G_BIST_CFG2, 0x00002c), - REG(HSIO_PLL5G_BIST_STAT0, 0x000030), - REG(HSIO_PLL5G_BIST_STAT1, 0x000034), - REG(HSIO_RCOMP_CFG0, 0x000038), - REG(HSIO_RCOMP_STATUS, 0x00003c), - REG(HSIO_SYNC_ETH_CFG, 0x000040), - REG(HSIO_SYNC_ETH_PLL_CFG, 0x000048), - REG(HSIO_S1G_DES_CFG, 0x00004c), - REG(HSIO_S1G_IB_CFG, 0x000050), - REG(HSIO_S1G_OB_CFG, 0x000054), - REG(HSIO_S1G_SER_CFG, 0x000058), - REG(HSIO_S1G_COMMON_CFG, 0x00005c), - REG(HSIO_S1G_PLL_CFG, 0x000060), - REG(HSIO_S1G_PLL_STATUS, 0x000064), - REG(HSIO_S1G_DFT_CFG0, 0x000068), - REG(HSIO_S1G_DFT_CFG1, 0x00006c), - REG(HSIO_S1G_DFT_CFG2, 0x000070), - REG(HSIO_S1G_TP_CFG, 0x000074), - REG(HSIO_S1G_RC_PLL_BIST_CFG, 0x000078), - REG(HSIO_S1G_MISC_CFG, 0x00007c), - REG(HSIO_S1G_DFT_STATUS, 0x000080), - REG(HSIO_S1G_MISC_STATUS, 0x000084), - REG(HSIO_MCB_S1G_ADDR_CFG, 0x000088), - REG(HSIO_S6G_DIG_CFG, 0x00008c), - REG(HSIO_S6G_DFT_CFG0, 0x000090), - REG(HSIO_S6G_DFT_CFG1, 0x000094), - REG(HSIO_S6G_DFT_CFG2, 0x000098), - REG(HSIO_S6G_TP_CFG0, 0x00009c), - REG(HSIO_S6G_TP_CFG1, 0x0000a0), - REG(HSIO_S6G_RC_PLL_BIST_CFG, 0x0000a4), - REG(HSIO_S6G_MISC_CFG, 0x0000a8), - REG(HSIO_S6G_OB_ANEG_CFG, 0x0000ac), - REG(HSIO_S6G_DFT_STATUS, 0x0000b0), - REG(HSIO_S6G_ERR_CNT, 0x0000b4), - REG(HSIO_S6G_MISC_STATUS, 0x0000b8), - REG(HSIO_S6G_DES_CFG, 0x0000bc), - REG(HSIO_S6G_IB_CFG, 0x0000c0), - REG(HSIO_S6G_IB_CFG1, 0x0000c4), - REG(HSIO_S6G_IB_CFG2, 0x0000c8), - REG(HSIO_S6G_IB_CFG3, 0x0000cc), - REG(HSIO_S6G_IB_CFG4, 0x0000d0), - REG(HSIO_S6G_IB_CFG5, 0x0000d4), - REG(HSIO_S6G_OB_CFG, 0x0000d8), - REG(HSIO_S6G_OB_CFG1, 0x0000dc), - REG(HSIO_S6G_SER_CFG, 0x0000e0), - REG(HSIO_S6G_COMMON_CFG, 0x0000e4), - REG(HSIO_S6G_PLL_CFG, 0x0000e8), - REG(HSIO_S6G_ACJTAG_CFG, 0x0000ec), - REG(HSIO_S6G_GP_CFG, 0x0000f0), - REG(HSIO_S6G_IB_STATUS0, 0x0000f4), - REG(HSIO_S6G_IB_STATUS1, 0x0000f8), - REG(HSIO_S6G_ACJTAG_STATUS, 0x0000fc), - REG(HSIO_S6G_PLL_STATUS, 0x000100), - REG(HSIO_S6G_REVID, 0x000104), - REG(HSIO_MCB_S6G_ADDR_CFG, 0x000108), - REG(HSIO_HW_CFG, 0x00010c), - REG(HSIO_HW_QSGMII_CFG, 0x000110), - REG(HSIO_HW_QSGMII_STAT, 0x000114), - REG(HSIO_CLK_CFG, 0x000118), - REG(HSIO_TEMP_SENSOR_CTRL, 0x00011c), - REG(HSIO_TEMP_SENSOR_CFG, 0x000120), - REG(HSIO_TEMP_SENSOR_STAT, 0x000124), -}; - static const u32 ocelot_qsys_regmap[] = { REG(QSYS_PORT_MODE, 0x011200), REG(QSYS_SWITCH_PORT_MODE, 0x011234), @@ -302,7 +227,6 @@ static const u32 ocelot_sys_regmap[] = { static const u32 *ocelot_regmap[] = { [ANA] = ocelot_ana_regmap, [QS] = ocelot_qs_regmap, - [HSIO] = ocelot_hsio_regmap, [QSYS] = ocelot_qsys_regmap, [REW] = ocelot_rew_regmap, [SYS] = ocelot_sys_regmap, @@ -453,9 +377,11 @@ static void ocelot_pll5_init(struct ocelot *ocelot) /* Configure PLL5. This will need a proper CCF driver * The values are coming from the VTSS API for Ocelot */ - ocelot_write(ocelot, HSIO_PLL5G_CFG4_IB_CTRL(0x7600) | - HSIO_PLL5G_CFG4_IB_BIAS_CTRL(0x8), HSIO_PLL5G_CFG4); - ocelot_write(ocelot, HSIO_PLL5G_CFG0_CORE_CLK_DIV(0x11) | + regmap_write(ocelot->targets[HSIO], HSIO_PLL5G_CFG4, + HSIO_PLL5G_CFG4_IB_CTRL(0x7600) | + HSIO_PLL5G_CFG4_IB_BIAS_CTRL(0x8)); + regmap_write(ocelot->targets[HSIO], HSIO_PLL5G_CFG0, + HSIO_PLL5G_CFG0_CORE_CLK_DIV(0x11) | HSIO_PLL5G_CFG0_CPU_CLK_DIV(2) | HSIO_PLL5G_CFG0_ENA_BIAS | HSIO_PLL5G_CFG0_ENA_VCO_BUF | @@ -465,13 +391,14 @@ static void ocelot_pll5_init(struct ocelot *ocelot) HSIO_PLL5G_CFG0_SELBGV820(4) | HSIO_PLL5G_CFG0_DIV4 | HSIO_PLL5G_CFG0_ENA_CLKTREE | - HSIO_PLL5G_CFG0_ENA_LANE, HSIO_PLL5G_CFG0); - ocelot_write(ocelot, HSIO_PLL5G_CFG2_EN_RESET_FRQ_DET | + HSIO_PLL5G_CFG0_ENA_LANE); + regmap_write(ocelot->targets[HSIO], HSIO_PLL5G_CFG2, + HSIO_PLL5G_CFG2_EN_RESET_FRQ_DET | HSIO_PLL5G_CFG2_EN_RESET_OVERRUN | HSIO_PLL5G_CFG2_GAIN_TEST(0x8) | HSIO_PLL5G_CFG2_ENA_AMPCTRL | HSIO_PLL5G_CFG2_PWD_AMPCTRL_N | - HSIO_PLL5G_CFG2_AMPC_SEL(0x10), HSIO_PLL5G_CFG2); + HSIO_PLL5G_CFG2_AMPC_SEL(0x10)); } int ocelot_chip_init(struct ocelot *ocelot) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 5c8d452e35e2..c89d3effd99d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -48,6 +48,7 @@ source "drivers/phy/lantiq/Kconfig" source "drivers/phy/marvell/Kconfig" source "drivers/phy/mediatek/Kconfig" source "drivers/phy/motorola/Kconfig" +source "drivers/phy/mscc/Kconfig" source "drivers/phy/qualcomm/Kconfig" source "drivers/phy/ralink/Kconfig" source "drivers/phy/renesas/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 84e3bd9c5665..ce8339ff0022 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -18,6 +18,7 @@ obj-y += broadcom/ \ hisilicon/ \ marvell/ \ motorola/ \ + mscc/ \ qualcomm/ \ ralink/ \ samsung/ \ diff --git a/drivers/phy/mscc/Kconfig b/drivers/phy/mscc/Kconfig new file mode 100644 index 000000000000..2e2a466efd66 --- /dev/null +++ b/drivers/phy/mscc/Kconfig @@ -0,0 +1,11 @@ +# +# Phy drivers for Microsemi devices +# + +config PHY_OCELOT_SERDES + tristate "SerDes PHY driver for Microsemi Ocelot" + select GENERIC_PHY + depends on OF + depends on MFD_SYSCON + help + Enable this for supporting SerDes muxing with Microsemi Ocelot. diff --git a/drivers/phy/mscc/Makefile b/drivers/phy/mscc/Makefile new file mode 100644 index 000000000000..e14749170fc9 --- /dev/null +++ b/drivers/phy/mscc/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Microsemi phy drivers. +# + +obj-$(CONFIG_PHY_OCELOT_SERDES) := phy-ocelot-serdes.o diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c new file mode 100644 index 000000000000..8936abd22f0f --- /dev/null +++ b/drivers/phy/mscc/phy-ocelot-serdes.c @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * SerDes PHY driver for Microsemi Ocelot + * + * Copyright (c) 2018 Microsemi + * + */ + +#include <linux/err.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <soc/mscc/ocelot_hsio.h> +#include <dt-bindings/phy/phy-ocelot-serdes.h> + +struct serdes_ctrl { + struct regmap *regs; + struct device *dev; + struct phy *phys[SERDES_MAX]; +}; + +struct serdes_macro { + u8 idx; + /* Not used when in QSGMII or PCIe mode */ + int port; + struct serdes_ctrl *ctrl; +}; + +#define MCB_S1G_CFG_TIMEOUT 50 + +static int __serdes_write_mcb_s1g(struct regmap *regmap, u8 macro, u32 op) +{ + unsigned int regval; + + regmap_write(regmap, HSIO_MCB_S1G_ADDR_CFG, op | + HSIO_MCB_S1G_ADDR_CFG_SERDES1G_ADDR(BIT(macro))); + + return regmap_read_poll_timeout(regmap, HSIO_MCB_S1G_ADDR_CFG, regval, + (regval & op) != op, 100, + MCB_S1G_CFG_TIMEOUT * 1000); +} + +static int serdes_commit_mcb_s1g(struct regmap *regmap, u8 macro) +{ + return __serdes_write_mcb_s1g(regmap, macro, + HSIO_MCB_S1G_ADDR_CFG_SERDES1G_WR_ONE_SHOT); +} + +static int serdes_update_mcb_s1g(struct regmap *regmap, u8 macro) +{ + return __serdes_write_mcb_s1g(regmap, macro, + HSIO_MCB_S1G_ADDR_CFG_SERDES1G_RD_ONE_SHOT); +} + +static int serdes_init_s1g(struct regmap *regmap, u8 serdes) +{ + int ret; + + ret = serdes_update_mcb_s1g(regmap, serdes); + if (ret) + return ret; + + regmap_update_bits(regmap, HSIO_S1G_COMMON_CFG, + HSIO_S1G_COMMON_CFG_SYS_RST | + HSIO_S1G_COMMON_CFG_ENA_LANE | + HSIO_S1G_COMMON_CFG_ENA_ELOOP | + HSIO_S1G_COMMON_CFG_ENA_FLOOP, + HSIO_S1G_COMMON_CFG_ENA_LANE); + + regmap_update_bits(regmap, HSIO_S1G_PLL_CFG, + HSIO_S1G_PLL_CFG_PLL_FSM_ENA | + HSIO_S1G_PLL_CFG_PLL_FSM_CTRL_DATA_M, + HSIO_S1G_PLL_CFG_PLL_FSM_CTRL_DATA(200) | + HSIO_S1G_PLL_CFG_PLL_FSM_ENA); + + regmap_update_bits(regmap, HSIO_S1G_MISC_CFG, + HSIO_S1G_MISC_CFG_DES_100FX_CPMD_ENA | + HSIO_S1G_MISC_CFG_LANE_RST, + HSIO_S1G_MISC_CFG_LANE_RST); + + ret = serdes_commit_mcb_s1g(regmap, serdes); + if (ret) + return ret; + + regmap_update_bits(regmap, HSIO_S1G_COMMON_CFG, + HSIO_S1G_COMMON_CFG_SYS_RST, + HSIO_S1G_COMMON_CFG_SYS_RST); + + regmap_update_bits(regmap, HSIO_S1G_MISC_CFG, + HSIO_S1G_MISC_CFG_LANE_RST, 0); + + ret = serdes_commit_mcb_s1g(regmap, serdes); + if (ret) + return ret; + + return 0; +} + +struct serdes_mux { + u8 idx; + u8 port; + enum phy_mode mode; + u32 mask; + u32 mux; +}; + +#define SERDES_MUX(_idx, _port, _mode, _mask, _mux) { \ + .idx = _idx, \ + .port = _port, \ + .mode = _mode, \ + .mask = _mask, \ + .mux = _mux, \ +} + +#define SERDES_MUX_SGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_SGMII, m, c) +#define SERDES_MUX_QSGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_QSGMII, m, c) + +static const struct serdes_mux ocelot_serdes_muxes[] = { + SERDES_MUX_SGMII(SERDES1G(0), 0, 0, 0), + SERDES_MUX_SGMII(SERDES1G(1), 1, HSIO_HW_CFG_DEV1G_5_MODE, 0), + SERDES_MUX_SGMII(SERDES1G(1), 5, HSIO_HW_CFG_QSGMII_ENA | + HSIO_HW_CFG_DEV1G_5_MODE, HSIO_HW_CFG_DEV1G_5_MODE), + SERDES_MUX_SGMII(SERDES1G(2), 2, HSIO_HW_CFG_DEV1G_4_MODE, 0), + SERDES_MUX_SGMII(SERDES1G(2), 4, HSIO_HW_CFG_QSGMII_ENA | + HSIO_HW_CFG_DEV1G_4_MODE, HSIO_HW_CFG_DEV1G_4_MODE), + SERDES_MUX_SGMII(SERDES1G(3), 3, HSIO_HW_CFG_DEV1G_6_MODE, 0), + SERDES_MUX_SGMII(SERDES1G(3), 6, HSIO_HW_CFG_QSGMII_ENA | + HSIO_HW_CFG_DEV1G_6_MODE, HSIO_HW_CFG_DEV1G_6_MODE), + SERDES_MUX_SGMII(SERDES1G(4), 4, HSIO_HW_CFG_QSGMII_ENA | + HSIO_HW_CFG_DEV1G_4_MODE | HSIO_HW_CFG_DEV1G_9_MODE, + 0), + SERDES_MUX_SGMII(SERDES1G(4), 9, HSIO_HW_CFG_DEV1G_4_MODE | + HSIO_HW_CFG_DEV1G_9_MODE, HSIO_HW_CFG_DEV1G_4_MODE | + HSIO_HW_CFG_DEV1G_9_MODE), + SERDES_MUX_SGMII(SERDES1G(5), 5, HSIO_HW_CFG_QSGMII_ENA | + HSIO_HW_CFG_DEV1G_5_MODE | HSIO_HW_CFG_DEV2G5_10_MODE, + 0), + SERDES_MUX_SGMII(SERDES1G(5), 10, HSIO_HW_CFG_PCIE_ENA | + HSIO_HW_CFG_DEV1G_5_MODE | HSIO_HW_CFG_DEV2G5_10_MODE, + HSIO_HW_CFG_DEV1G_5_MODE | HSIO_HW_CFG_DEV2G5_10_MODE), + SERDES_MUX_QSGMII(SERDES6G(0), 4, HSIO_HW_CFG_QSGMII_ENA, + HSIO_HW_CFG_QSGMII_ENA), + SERDES_MUX_QSGMII(SERDES6G(0), 5, HSIO_HW_CFG_QSGMII_ENA, + HSIO_HW_CFG_QSGMII_ENA), + SERDES_MUX_QSGMII(SERDES6G(0), 6, HSIO_HW_CFG_QSGMII_ENA, + HSIO_HW_CFG_QSGMII_ENA), + SERDES_MUX_SGMII(SERDES6G(0), 7, HSIO_HW_CFG_QSGMII_ENA, 0), + SERDES_MUX_QSGMII(SERDES6G(0), 7, HSIO_HW_CFG_QSGMII_ENA, + HSIO_HW_CFG_QSGMII_ENA), + SERDES_MUX_SGMII(SERDES6G(1), 8, 0, 0), + SERDES_MUX_SGMII(SERDES6G(2), 10, HSIO_HW_CFG_PCIE_ENA | + HSIO_HW_CFG_DEV2G5_10_MODE, 0), + SERDES_MUX(SERDES6G(2), 10, PHY_MODE_PCIE, HSIO_HW_CFG_PCIE_ENA, + HSIO_HW_CFG_PCIE_ENA), +}; + +static int serdes_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct serdes_macro *macro = phy_get_drvdata(phy); + unsigned int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(ocelot_serdes_muxes); i++) { + if (macro->idx != ocelot_serdes_muxes[i].idx || + mode != ocelot_serdes_muxes[i].mode) + continue; + + if (mode != PHY_MODE_QSGMII && + macro->port != ocelot_serdes_muxes[i].port) + continue; + + ret = regmap_update_bits(macro->ctrl->regs, HSIO_HW_CFG, + ocelot_serdes_muxes[i].mask, + ocelot_serdes_muxes[i].mux); + if (ret) + return ret; + + if (macro->idx <= SERDES1G_MAX) + return serdes_init_s1g(macro->ctrl->regs, macro->idx); + + /* SERDES6G and PCIe not supported yet */ + return -EOPNOTSUPP; + } + + return -EINVAL; +} + +static const struct phy_ops serdes_ops = { + .set_mode = serdes_set_mode, + .owner = THIS_MODULE, +}; + +static struct phy *serdes_simple_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct serdes_ctrl *ctrl = dev_get_drvdata(dev); + unsigned int port, idx, i; + + if (args->args_count != 2) + return ERR_PTR(-EINVAL); + + port = args->args[0]; + idx = args->args[1]; + + for (i = 0; i <= SERDES_MAX; i++) { + struct serdes_macro *macro = phy_get_drvdata(ctrl->phys[i]); + + if (idx != macro->idx) + continue; + + /* SERDES6G(0) is the only SerDes capable of QSGMII */ + if (idx != SERDES6G(0) && macro->port >= 0) + return ERR_PTR(-EBUSY); + + macro->port = port; + return ctrl->phys[i]; + } + + return ERR_PTR(-ENODEV); +} + +static int serdes_phy_create(struct serdes_ctrl *ctrl, u8 idx, struct phy **phy) +{ + struct serdes_macro *macro; + + *phy = devm_phy_create(ctrl->dev, NULL, &serdes_ops); + if (IS_ERR(*phy)) + return PTR_ERR(*phy); + + macro = devm_kzalloc(ctrl->dev, sizeof(*macro), GFP_KERNEL); + if (!macro) + return -ENOMEM; + + macro->idx = idx; + macro->ctrl = ctrl; + macro->port = -1; + + phy_set_drvdata(*phy, macro); + + return 0; +} + +static int serdes_probe(struct platform_device *pdev) +{ + struct phy_provider *provider; + struct serdes_ctrl *ctrl; + unsigned int i; + int ret; + + ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + ctrl->dev = &pdev->dev; + ctrl->regs = syscon_node_to_regmap(pdev->dev.parent->of_node); + if (!ctrl->regs) + return -ENODEV; + + for (i = 0; i <= SERDES_MAX; i++) { + ret = serdes_phy_create(ctrl, i, &ctrl->phys[i]); + if (ret) + return ret; + } + + dev_set_drvdata(&pdev->dev, ctrl); + + provider = devm_of_phy_provider_register(ctrl->dev, + serdes_simple_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id serdes_ids[] = { + { .compatible = "mscc,vsc7514-serdes", }, + {}, +}; +MODULE_DEVICE_TABLE(of, serdes_ids); + +static struct platform_driver mscc_ocelot_serdes = { + .probe = serdes_probe, + .driver = { + .name = "mscc,ocelot-serdes", + .of_match_table = of_match_ptr(serdes_ids), + }, +}; + +module_platform_driver(mscc_ocelot_serdes); + +MODULE_AUTHOR("Quentin Schulz <quentin.schulz@bootlin.com>"); +MODULE_DESCRIPTION("SerDes driver for Microsemi Ocelot"); +MODULE_LICENSE("Dual MIT/GPL"); diff --git a/include/dt-bindings/phy/phy-ocelot-serdes.h b/include/dt-bindings/phy/phy-ocelot-serdes.h new file mode 100644 index 000000000000..bd28f21206f6 --- /dev/null +++ b/include/dt-bindings/phy/phy-ocelot-serdes.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* Copyright (c) 2018 Microsemi Corporation */ +#ifndef __PHY_OCELOT_SERDES_H__ +#define __PHY_OCELOT_SERDES_H__ + +#define SERDES1G(x) (x) +#define SERDES1G_MAX SERDES1G(5) +#define SERDES6G(x) (SERDES1G_MAX + 1 + (x)) +#define SERDES6G_MAX SERDES6G(2) +#define SERDES_MAX SERDES6G_MAX + +#endif diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 9713aebdd348..03b319f89a34 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -37,9 +37,11 @@ enum phy_mode { PHY_MODE_USB_OTG, PHY_MODE_SGMII, PHY_MODE_2500SGMII, + PHY_MODE_QSGMII, PHY_MODE_10GKR, PHY_MODE_UFS_HS_A, PHY_MODE_UFS_HS_B, + PHY_MODE_PCIE, }; /** diff --git a/drivers/net/ethernet/mscc/ocelot_hsio.h b/include/soc/mscc/ocelot_hsio.h index d93ddec3931b..43112dd7313a 100644 --- a/drivers/net/ethernet/mscc/ocelot_hsio.h +++ b/include/soc/mscc/ocelot_hsio.h @@ -8,6 +8,80 @@ #ifndef _MSCC_OCELOT_HSIO_H_ #define _MSCC_OCELOT_HSIO_H_ +#define HSIO_PLL5G_CFG0 0x0000 +#define HSIO_PLL5G_CFG1 0x0004 +#define HSIO_PLL5G_CFG2 0x0008 +#define HSIO_PLL5G_CFG3 0x000c +#define HSIO_PLL5G_CFG4 0x0010 +#define HSIO_PLL5G_CFG5 0x0014 +#define HSIO_PLL5G_CFG6 0x0018 +#define HSIO_PLL5G_STATUS0 0x001c +#define HSIO_PLL5G_STATUS1 0x0020 +#define HSIO_PLL5G_BIST_CFG0 0x0024 +#define HSIO_PLL5G_BIST_CFG1 0x0028 +#define HSIO_PLL5G_BIST_CFG2 0x002c +#define HSIO_PLL5G_BIST_STAT0 0x0030 +#define HSIO_PLL5G_BIST_STAT1 0x0034 +#define HSIO_RCOMP_CFG0 0x0038 +#define HSIO_RCOMP_STATUS 0x003c +#define HSIO_SYNC_ETH_CFG 0x0040 +#define HSIO_SYNC_ETH_PLL_CFG 0x0048 +#define HSIO_S1G_DES_CFG 0x004c +#define HSIO_S1G_IB_CFG 0x0050 +#define HSIO_S1G_OB_CFG 0x0054 +#define HSIO_S1G_SER_CFG 0x0058 +#define HSIO_S1G_COMMON_CFG 0x005c +#define HSIO_S1G_PLL_CFG 0x0060 +#define HSIO_S1G_PLL_STATUS 0x0064 +#define HSIO_S1G_DFT_CFG0 0x0068 +#define HSIO_S1G_DFT_CFG1 0x006c +#define HSIO_S1G_DFT_CFG2 0x0070 +#define HSIO_S1G_TP_CFG 0x0074 +#define HSIO_S1G_RC_PLL_BIST_CFG 0x0078 +#define HSIO_S1G_MISC_CFG 0x007c +#define HSIO_S1G_DFT_STATUS 0x0080 +#define HSIO_S1G_MISC_STATUS 0x0084 +#define HSIO_MCB_S1G_ADDR_CFG 0x0088 +#define HSIO_S6G_DIG_CFG 0x008c +#define HSIO_S6G_DFT_CFG0 0x0090 +#define HSIO_S6G_DFT_CFG1 0x0094 +#define HSIO_S6G_DFT_CFG2 0x0098 +#define HSIO_S6G_TP_CFG0 0x009c +#define HSIO_S6G_TP_CFG1 0x00a0 +#define HSIO_S6G_RC_PLL_BIST_CFG 0x00a4 +#define HSIO_S6G_MISC_CFG 0x00a8 +#define HSIO_S6G_OB_ANEG_CFG 0x00ac +#define HSIO_S6G_DFT_STATUS 0x00b0 +#define HSIO_S6G_ERR_CNT 0x00b4 +#define HSIO_S6G_MISC_STATUS 0x00b8 +#define HSIO_S6G_DES_CFG 0x00bc +#define HSIO_S6G_IB_CFG 0x00c0 +#define HSIO_S6G_IB_CFG1 0x00c4 +#define HSIO_S6G_IB_CFG2 0x00c8 +#define HSIO_S6G_IB_CFG3 0x00cc +#define HSIO_S6G_IB_CFG4 0x00d0 +#define HSIO_S6G_IB_CFG5 0x00d4 +#define HSIO_S6G_OB_CFG 0x00d8 +#define HSIO_S6G_OB_CFG1 0x00dc +#define HSIO_S6G_SER_CFG 0x00e0 +#define HSIO_S6G_COMMON_CFG 0x00e4 +#define HSIO_S6G_PLL_CFG 0x00e8 +#define HSIO_S6G_ACJTAG_CFG 0x00ec +#define HSIO_S6G_GP_CFG 0x00f0 +#define HSIO_S6G_IB_STATUS0 0x00f4 +#define HSIO_S6G_IB_STATUS1 0x00f8 +#define HSIO_S6G_ACJTAG_STATUS 0x00fc +#define HSIO_S6G_PLL_STATUS 0x0100 +#define HSIO_S6G_REVID 0x0104 +#define HSIO_MCB_S6G_ADDR_CFG 0x0108 +#define HSIO_HW_CFG 0x010c +#define HSIO_HW_QSGMII_CFG 0x0110 +#define HSIO_HW_QSGMII_STAT 0x0114 +#define HSIO_CLK_CFG 0x0118 +#define HSIO_TEMP_SENSOR_CTRL 0x011c +#define HSIO_TEMP_SENSOR_CFG 0x0120 +#define HSIO_TEMP_SENSOR_STAT 0x0124 + #define HSIO_PLL5G_CFG0_ENA_ROT BIT(31) #define HSIO_PLL5G_CFG0_ENA_LANE BIT(30) #define HSIO_PLL5G_CFG0_ENA_CLKTREE BIT(29) |