diff options
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 52 |
1 files changed, 29 insertions, 23 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 6f77a46c7e2c..18c46bb0f3bf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -276,6 +276,7 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) bool stmmac_eee_init(struct stmmac_priv *priv) { char *phy_bus_name = priv->plat->phy_bus_name; + unsigned long flags; bool ret = false; /* Using PCS we cannot dial with the phy registers at this stage @@ -300,6 +301,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv) * changed). * In that case the driver disable own timers. */ + spin_lock_irqsave(&priv->lock, flags); if (priv->eee_active) { pr_debug("stmmac: disable EEE\n"); del_timer_sync(&priv->eee_ctrl_timer); @@ -307,9 +309,11 @@ bool stmmac_eee_init(struct stmmac_priv *priv) tx_lpi_timer); } priv->eee_active = 0; + spin_unlock_irqrestore(&priv->lock, flags); goto out; } /* Activate the EEE and start timers */ + spin_lock_irqsave(&priv->lock, flags); if (!priv->eee_active) { priv->eee_active = 1; init_timer(&priv->eee_ctrl_timer); @@ -325,9 +329,10 @@ bool stmmac_eee_init(struct stmmac_priv *priv) /* Set HW EEE according to the speed */ priv->hw->mac->set_eee_pls(priv->hw, priv->phydev->link); - pr_debug("stmmac: Energy-Efficient Ethernet initialized\n"); - ret = true; + spin_unlock_irqrestore(&priv->lock, flags); + + pr_debug("stmmac: Energy-Efficient Ethernet initialized\n"); } out: return ret; @@ -760,12 +765,12 @@ static void stmmac_adjust_link(struct net_device *dev) if (new_state && netif_msg_link(priv)) phy_print_status(phydev); + spin_unlock_irqrestore(&priv->lock, flags); + /* At this stage, it could be needed to setup the EEE or adjust some * MAC related HW registers. */ priv->eee_enabled = stmmac_eee_init(priv); - - spin_unlock_irqrestore(&priv->lock, flags); } /** @@ -959,12 +964,12 @@ static void stmmac_clear_descriptors(struct stmmac_priv *priv) } static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, - int i) + int i, gfp_t flags) { struct sk_buff *skb; skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN, - GFP_KERNEL); + flags); if (!skb) { pr_err("%s: Rx init fails; skb is NULL\n", __func__); return -ENOMEM; @@ -1006,7 +1011,7 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) * and allocates the socket buffers. It suppors the chained and ring * modes. */ -static int init_dma_desc_rings(struct net_device *dev) +static int init_dma_desc_rings(struct net_device *dev, gfp_t flags) { int i; struct stmmac_priv *priv = netdev_priv(dev); @@ -1041,7 +1046,7 @@ static int init_dma_desc_rings(struct net_device *dev) else p = priv->dma_rx + i; - ret = stmmac_init_rx_buffers(priv, p, i); + ret = stmmac_init_rx_buffers(priv, p, i, flags); if (ret) goto err_init_rx_buffers; @@ -1647,11 +1652,6 @@ static int stmmac_hw_setup(struct net_device *dev) struct stmmac_priv *priv = netdev_priv(dev); int ret; - ret = init_dma_desc_rings(dev); - if (ret < 0) { - pr_err("%s: DMA descriptors initialization failed\n", __func__); - return ret; - } /* DMA initialization and SW reset */ ret = stmmac_init_dma_engine(priv); if (ret < 0) { @@ -1705,10 +1705,6 @@ static int stmmac_hw_setup(struct net_device *dev) } priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS; - priv->eee_enabled = stmmac_eee_init(priv); - - stmmac_init_tx_coalesce(priv); - if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { priv->rx_riwt = MAX_DMA_RIWT; priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT); @@ -1761,12 +1757,20 @@ static int stmmac_open(struct net_device *dev) goto dma_desc_error; } + ret = init_dma_desc_rings(dev, GFP_KERNEL); + if (ret < 0) { + pr_err("%s: DMA descriptors initialization failed\n", __func__); + goto init_error; + } + ret = stmmac_hw_setup(dev); if (ret < 0) { pr_err("%s: Hw setup failed\n", __func__); goto init_error; } + stmmac_init_tx_coalesce(priv); + if (priv->phydev) phy_start(priv->phydev); @@ -1894,7 +1898,10 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int nopaged_len = skb_headlen(skb); unsigned int enh_desc = priv->plat->enh_desc; + spin_lock(&priv->tx_lock); + if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) { + spin_unlock(&priv->tx_lock); if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); /* This is a hard error, log it. */ @@ -1903,8 +1910,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } - spin_lock(&priv->tx_lock); - if (priv->tx_path_in_lpi_mode) stmmac_disable_eee_mode(priv); @@ -2025,6 +2030,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; dma_map_err: + spin_unlock(&priv->tx_lock); dev_err(priv->device, "Tx dma map failed\n"); dev_kfree_skb(skb); priv->dev->stats.tx_dropped++; @@ -2281,9 +2287,7 @@ static void stmmac_set_rx_mode(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); - spin_lock(&priv->lock); priv->hw->mac->set_filter(priv->hw, dev); - spin_unlock(&priv->lock); } /** @@ -2950,7 +2954,7 @@ int stmmac_suspend(struct net_device *ndev) stmmac_set_mac(priv->ioaddr, false); pinctrl_pm_select_sleep_state(priv->device); /* Disable clock in case of PWM is off */ - clk_disable_unprepare(priv->stmmac_clk); + clk_disable(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); @@ -2982,7 +2986,7 @@ int stmmac_resume(struct net_device *ndev) } else { pinctrl_pm_select_default_state(priv->device); /* enable the clk prevously disabled */ - clk_prepare_enable(priv->stmmac_clk); + clk_enable(priv->stmmac_clk); /* reset the phy so that it's ready */ if (priv->mii) stmmac_mdio_reset(priv->mii); @@ -2990,7 +2994,9 @@ int stmmac_resume(struct net_device *ndev) netif_device_attach(ndev); + init_dma_desc_rings(ndev, GFP_ATOMIC); stmmac_hw_setup(ndev); + stmmac_init_tx_coalesce(priv); napi_enable(&priv->napi); |