diff options
32 files changed, 108 insertions, 107 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a085be183b68..df6f20feb0ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17921,6 +17921,7 @@ F: include/media/i2c/tw9910.h TEE SUBSYSTEM M: Jens Wiklander <jens.wiklander@linaro.org> +R: Sumit Garg <sumit.garg@linaro.org> L: op-tee@lists.trustedfirmware.org S: Maintained F: Documentation/staging/tee.rst diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 7d2c72562c73..9148a01ed6d9 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -105,9 +105,13 @@ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-reset-duration = <20>; phy-supply = <&sw2_reg>; - phy-handle = <ðphy0>; status = "okay"; + fixed-link { + speed = <1000>; + full-duplex; + }; + mdio { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index 236fc205c389..d0768ae429fa 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -406,6 +406,18 @@ vin-supply = <&sw1_reg>; }; +®_pu { + vin-supply = <&sw1_reg>; +}; + +®_vdd1p1 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&sw2_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi index 828cf3e39784..c4e146f3341b 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi @@ -126,7 +126,7 @@ compatible = "nxp,pca8574"; reg = <0x3a>; gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts index 5339210b63d0..dd8003bd1fc0 100644 --- a/arch/arm/boot/dts/imx7d-meerkat96.dts +++ b/arch/arm/boot/dts/imx7d-meerkat96.dts @@ -193,7 +193,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; keep-power-in-suspend; - tuning-step = <2>; + fsl,tuning-step = <2>; vmmc-supply = <®_3p3v>; no-1-8-v; broken-cd; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e57da0d32b98..e519897fae08 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -351,7 +351,7 @@ pinctrl-2 = <&pinctrl_usdhc1_200mhz>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; bus-width = <4>; - tuning-step = <2>; + fsl,tuning-step = <2>; vmmc-supply = <®_3p3v>; wakeup-source; no-1-8-v; diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts index ddcd53aa533d..2ffcd085904d 100644 --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts @@ -250,7 +250,7 @@ nand-ecc-step-size = <512>; nand-bus-width = <8>; /* efs2 partition is secured */ - secure-regions = <0x500000 0xb00000>; + secure-regions = /bits/ 64 <0x500000 0xb00000>; }; }; diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index 3065f84634b8..80c40da79604 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -250,8 +250,8 @@ nand-ecc-step-size = <512>; nand-bus-width = <8>; /* ico and efs2 partitions are secured */ - secure-regions = <0x500000 0x500000 - 0xa00000 0xb00000>; + secure-regions = /bits/ 64 <0x500000 0x500000 + 0xa00000 0xb00000>; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 83b179692dff..13d216192904 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include "ste-href-family-pinctrl.dtsi" / { @@ -64,17 +65,20 @@ reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; linux,default-trigger = "heartbeat"; }; chan@1 { reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; chan@2 { reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; }; lp5521@34 { @@ -88,16 +92,19 @@ reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; chan@1 { reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; chan@2 { reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; }; bh1780@29 { diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 97f497854e05..d05fa679dcd3 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -85,7 +85,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 020e6deb67c8..237e8aa9fe83 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -12,6 +12,7 @@ #include <linux/suspend.h> #include <linux/io.h> +#include "common.h" #include "hardware.h" static int mx27_suspend_enter(suspend_state_t state) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index e67e7f5eb166..b0ce18d4cc98 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -166,6 +166,7 @@ config ARCH_MEDIATEK config ARCH_MESON bool "Amlogic Platforms" + select COMMON_CLK select MESON_IRQ_GPIO help This enables support for the arm64 based Amlogic SoCs diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index e22b94c83647..5e66ce1a334f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -79,7 +79,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii-id"; + phy-mode = "rgmii-txid"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index 6c309b97587d..e8d31279b7a3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -46,7 +46,8 @@ eee-broken-100tx; qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - vddio-supply = <&vddh>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index df212ed5bb94..e65d1c477e2c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -31,11 +31,10 @@ reg = <0x4>; eee-broken-1000t; eee-broken-100tx; - qca,clk-out-frequency = <125000000>; qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - - vddio-supply = <&vddh>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; vddio: vddio-regulator { regulator-name = "VDDIO"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index eca06a0c3cf8..a30249ebffa8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -197,8 +197,8 @@ ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - big-endian; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + little-endian; }; dcfg: syscon@1e00000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index 631e01c1b9fd..be1e7d6f0ecb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -88,11 +88,11 @@ pinctrl-0 = <&pinctrl_codec2>; reg = <0x18>; #sound-dai-cells = <0>; - HPVDD-supply = <®_3p3v>; - SPRVDD-supply = <®_3p3v>; - SPLVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - IOVDD-supply = <®_3p3v>; + HPVDD-supply = <®_gen_3p3>; + SPRVDD-supply = <®_gen_3p3>; + SPLVDD-supply = <®_gen_3p3>; + AVDD-supply = <®_gen_3p3>; + IOVDD-supply = <®_gen_3p3>; DVDD-supply = <&vgen4_reg>; reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 4dc8383478ee..a08a568c31d9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -45,8 +45,8 @@ reg_12p0_main: regulator-12p0-main { compatible = "regulator-fixed"; regulator-name = "12V_MAIN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; regulator-always-on; }; @@ -77,15 +77,6 @@ regulator-always-on; }; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - vin-supply = <®_3p3_main>; - regulator-name = "GEN_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -415,11 +406,11 @@ pinctrl-0 = <&pinctrl_codec1>; reg = <0x18>; #sound-dai-cells = <0>; - HPVDD-supply = <®_3p3v>; - SPRVDD-supply = <®_3p3v>; - SPLVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - IOVDD-supply = <®_3p3v>; + HPVDD-supply = <®_gen_3p3>; + SPRVDD-supply = <®_gen_3p3>; + SPLVDD-supply = <®_gen_3p3>; + AVDD-supply = <®_gen_3p3>; + IOVDD-supply = <®_gen_3p3>; DVDD-supply = <&vgen4_reg>; reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 634a91af8e83..4b854eb21f72 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -227,7 +227,7 @@ <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, + ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>, <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index b2bcbf23eefd..ca59d1f711f8 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -42,12 +42,12 @@ }; }; - dmss: dmss { + dmss: bus@48000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; dma-ranges; - ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; ti,sci-dev-id = <25>; @@ -134,7 +134,7 @@ }; }; - dmsc: dmsc@44043000 { + dmsc: system-controller@44043000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; @@ -148,7 +148,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -373,8 +373,9 @@ clocks = <&k3_clks 145 0>; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 99e94dee1bd4..deb19ae5e168 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -74,8 +74,9 @@ clocks = <&k3_clks 148 0>; }; - mcu_gpio_intr: interrupt-controller1 { + mcu_gpio_intr: interrupt-controller@4210000 { compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index cb340d1b401f..6cd3131eb9ff 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -433,8 +433,9 @@ #phy-cells = <0>; }; - intr_main_gpio: interrupt-controller0 { + intr_main_gpio: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x0 0x00a00000 0x0 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -444,18 +445,19 @@ ti,interrupt-ranges = <0 392 32>; }; - main-navss { + main_navss: bus@30800000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>; dma-coherent; dma-ranges; ti,sci-dev-id = <118>; - intr_main_navss: interrupt-controller1 { + intr_main_navss: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x0 0x310e0000 0x0 0x2000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index 0388c02c2203..f5b8ef2f5f77 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -116,11 +116,11 @@ }; }; - mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index ed42f13e7663..7cb864b4d74a 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -6,24 +6,24 @@ */ &cbass_wakeup { - dmsc: dmsc { + dmsc: system-controller@44083000 { compatible = "ti,am654-sci"; ti,host-id = <12>; - #address-cells = <1>; - #size-cells = <1>; - ranges; mbox-names = "rx", "tx"; mboxes= <&secure_proxy_main 11>, <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x44083000 0x1000>; + k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -69,8 +69,9 @@ power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; }; - intr_wkup_gpio: interrupt-controller2 { + intr_wkup_gpio: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x42200000 0x200>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 9e87fb313a54..eddb2ffb93ca 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -85,12 +85,6 @@ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; - - clk_ov5640_fixed: clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; }; &wkup_pmx0 { @@ -287,23 +281,6 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; - - ov5640: camera@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - - clocks = <&clk_ov5640_fixed>; - clock-names = "xclk"; - - port { - csi2_cam0: endpoint { - remote-endpoint = <&csi2_phy0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - }; - }; &main_i2c2 { @@ -496,14 +473,6 @@ }; }; -&csi2_0 { - csi2_phy0: endpoint { - remote-endpoint = <&csi2_cam0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; -}; - &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index f86c493a44f1..19fea8adbcff 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -68,8 +68,9 @@ }; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -85,9 +86,12 @@ #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; ti,sci-dev-id = <199>; + dma-coherent; + dma-ranges; - main_navss_intr: interrupt-controller1 { + main_navss_intr: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x00 0x310e0000 0x00 0x4000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 5e74e43822c3..5663fe3ea466 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu_wakeup { - dmsc: dmsc@44083000 { + dmsc: system-controller@44083000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -23,7 +23,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -96,8 +96,9 @@ clock-names = "fclk"; }; - wkup_gpio_intr: interrupt-controller2 { + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index c2aa45a3ac79..3bcafe4c1742 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -76,8 +76,9 @@ }; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -87,18 +88,19 @@ ti,interrupt-ranges = <8 392 56>; }; - main-navss { + main_navss: bus@30000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; dma-coherent; dma-ranges; ti,sci-dev-id = <199>; - main_navss_intr: interrupt-controller1 { + main_navss_intr: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x0 0x310e0000 0x0 0x4000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index d56e3475aee7..5e825e4d0306 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu_wakeup { - dmsc: dmsc@44083000 { + dmsc: system-controller@44083000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -23,7 +23,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -96,8 +96,9 @@ clock-names = "fclk"; }; - wkup_gpio_intr: interrupt-controller2 { + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -249,11 +250,11 @@ }; }; - mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c index e1957476a006..6dd190270123 100644 --- a/drivers/soc/amlogic/meson-clk-measure.c +++ b/drivers/soc/amlogic/meson-clk-measure.c @@ -626,10 +626,8 @@ static int meson_msr_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) { - dev_err(&pdev->dev, "io resource mapping failed\n"); + if (IS_ERR(base)) return PTR_ERR(base); - } priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &meson_clk_msr_regmap_config); diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c index 6132cc8d014c..6e6eb836e9b6 100644 --- a/drivers/tee/optee/call.c +++ b/drivers/tee/optee/call.c @@ -220,6 +220,7 @@ int optee_open_session(struct tee_context *ctx, struct optee_msg_arg *msg_arg; phys_addr_t msg_parg; struct optee_session *sess = NULL; + uuid_t client_uuid; /* +2 for the meta parameters added below */ shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg); @@ -240,10 +241,11 @@ int optee_open_session(struct tee_context *ctx, memcpy(&msg_arg->params[0].u.value, arg->uuid, sizeof(arg->uuid)); msg_arg->params[1].u.value.c = arg->clnt_login; - rc = tee_session_calc_client_uuid((uuid_t *)&msg_arg->params[1].u.value, - arg->clnt_login, arg->clnt_uuid); + rc = tee_session_calc_client_uuid(&client_uuid, arg->clnt_login, + arg->clnt_uuid); if (rc) goto out; + export_uuid(msg_arg->params[1].u.octets, &client_uuid); rc = optee_to_msg_param(msg_arg->params + 2, arg->num_params, param); if (rc) diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 81ff593ac4ec..e3d72d09c484 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -9,7 +9,7 @@ #include <linux/types.h> /* - * This file defines the OP-TEE message protocol used to communicate + * This file defines the OP-TEE message protocol (ABI) used to communicate * with an instance of OP-TEE running in secure world. * * This file is divided into two sections. @@ -144,9 +144,10 @@ struct optee_msg_param_value { * @tmem: parameter by temporary memory reference * @rmem: parameter by registered memory reference * @value: parameter by opaque value + * @octets: parameter by octet string * * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in - * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value, + * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets, * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates @rmem, * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used. @@ -157,6 +158,7 @@ struct optee_msg_param { struct optee_msg_param_tmem tmem; struct optee_msg_param_rmem rmem; struct optee_msg_param_value value; + u8 octets[24]; } u; }; |