summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c31
1 files changed, 17 insertions, 14 deletions
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 0507283bd4c1..2dbd2646e44e 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -23,35 +23,31 @@
* @sdata: Sensor data.
*
* returns:
- * 0 - no new samples available
- * 1 - new samples available
- * negative - error or unknown
+ * false - no new samples available or read error
+ * true - new samples available
*/
-static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
- struct st_sensor_data *sdata)
+static bool st_sensors_new_samples_available(struct iio_dev *indio_dev,
+ struct st_sensor_data *sdata)
{
int ret, status;
/* How would I know if I can't check it? */
if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr)
- return -EINVAL;
+ return true;
/* No scan mask, no interrupt */
if (!indio_dev->active_scan_mask)
- return 0;
+ return false;
ret = regmap_read(sdata->regmap,
sdata->sensor_settings->drdy_irq.stat_drdy.addr,
&status);
if (ret < 0) {
dev_err(sdata->dev, "error checking samples available\n");
- return ret;
+ return false;
}
- if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask)
- return 1;
-
- return 0;
+ return !!(status & sdata->sensor_settings->drdy_irq.stat_drdy.mask);
}
/**
@@ -180,9 +176,15 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
/* Tell the interrupt handler that we're dealing with edges */
if (irq_trig == IRQF_TRIGGER_FALLING ||
- irq_trig == IRQF_TRIGGER_RISING)
+ irq_trig == IRQF_TRIGGER_RISING) {
+ if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) {
+ dev_err(&indio_dev->dev,
+ "edge IRQ not supported w/o stat register.\n");
+ err = -EOPNOTSUPP;
+ goto iio_trigger_free;
+ }
sdata->edge_irq = true;
- else
+ } else {
/*
* If we're not using edges (i.e. level interrupts) we
* just mask off the IRQ, handle one interrupt, then
@@ -190,6 +192,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
* interrupt handler top half again and start over.
*/
irq_trig |= IRQF_ONESHOT;
+ }
/*
* If the interrupt pin is Open Drain, by definition this