diff options
| -rw-r--r-- | drivers/video/backlight/Kconfig | 30 | ||||
| -rw-r--r-- | drivers/video/backlight/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/backlight/lm3630a_bl.c | 54 | ||||
| -rw-r--r-- | drivers/video/backlight/qcom-wled.c | 1 | ||||
| -rw-r--r-- | drivers/video/backlight/rt4831-backlight.c | 203 |
5 files changed, 250 insertions, 39 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index d83c87b902c1..e32694c13da5 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -128,12 +128,12 @@ config LCD_HX8357 If you have a HX-8357 LCD panel, say Y to enable its LCD control driver. - config LCD_OTM3225A - tristate "ORISE Technology OTM3225A support" - depends on SPI - help - If you have a panel based on the OTM3225A controller - chip then say y to include a driver for it. +config LCD_OTM3225A + tristate "ORISE Technology OTM3225A support" + depends on SPI + help + If you have a panel based on the OTM3225A controller + chip then say y to include a driver for it. endif # LCD_CLASS_DEVICE @@ -269,11 +269,11 @@ config BACKLIGHT_MAX8925 WLED output, say Y here to enable this driver. config BACKLIGHT_APPLE - tristate "Apple Backlight Driver" - depends on X86 && ACPI - help - If you have an Intel-based Apple say Y to enable a driver for its - backlight. + tristate "Apple Backlight Driver" + depends on X86 && ACPI + help + If you have an Intel-based Apple say Y to enable a driver for its + backlight. config BACKLIGHT_TOSA tristate "Sharp SL-6000 Backlight Driver" @@ -289,6 +289,14 @@ config BACKLIGHT_QCOM_WLED If you have the Qualcomm PMIC, say Y to enable a driver for the WLED block. Currently it supports PM8941 and PMI8998. +config BACKLIGHT_RT4831 + tristate "Richtek RT4831 Backlight Driver" + depends on MFD_RT4831 + help + This enables support for Richtek RT4831 Backlight driver. + It's commonly used to drive the display WLED. There're four channels + inisde, and each channel can provide up to 30mA current. + config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" depends on X86 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 685f3f1ca4df..cae2c83422ae 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o +obj-$(CONFIG_BACKLIGHT_RT4831) += rt4831-backlight.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index e88a2b0e5904..e8b185bb6f5e 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -52,6 +52,7 @@ struct lm3630a_chip { struct gpio_desc *enable_gpio; struct regmap *regmap; struct pwm_device *pwmd; + struct pwm_state pwmd_state; }; /* i2c access */ @@ -167,16 +168,19 @@ static int lm3630a_intr_config(struct lm3630a_chip *pchip) return rval; } -static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) +static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) { - unsigned int period = pchip->pdata->pwm_period; - unsigned int duty = br * period / br_max; + int err; - pwm_config(pchip->pwmd, duty, period); - if (duty) - pwm_enable(pchip->pwmd); - else - pwm_disable(pchip->pwmd); + pchip->pwmd_state.period = pchip->pdata->pwm_period; + + err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max); + if (err) + return err; + + pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; + + return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); } /* update and get brightness */ @@ -187,11 +191,9 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; /* pwm control */ - if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { - lm3630a_pwm_ctrl(pchip, bl->props.brightness, - bl->props.max_brightness); - return bl->props.brightness; - } + if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, + bl->props.max_brightness); /* disable sleep */ ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); @@ -210,8 +212,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl) return 0; out_i2c_err: - dev_err(pchip->dev, "i2c failed to access\n"); - return bl->props.brightness; + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); + return ret; } static int lm3630a_bank_a_get_brightness(struct backlight_device *bl) @@ -264,11 +266,9 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; /* pwm control */ - if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { - lm3630a_pwm_ctrl(pchip, bl->props.brightness, - bl->props.max_brightness); - return bl->props.brightness; - } + if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, + bl->props.max_brightness); /* disable sleep */ ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); @@ -287,8 +287,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl) return 0; out_i2c_err: - dev_err(pchip->dev, "i2c failed to access REG_CTRL\n"); - return bl->props.brightness; + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); + return ret; } static int lm3630a_bank_b_get_brightness(struct backlight_device *bl) @@ -482,8 +482,10 @@ static int lm3630a_parse_node(struct lm3630a_chip *pchip, device_for_each_child_node(pchip->dev, node) { ret = lm3630a_parse_bank(pdata, node, &seen_led_sources); - if (ret) + if (ret) { + fwnode_handle_put(node); return ret; + } } return ret; @@ -563,11 +565,7 @@ static int lm3630a_probe(struct i2c_client *client, return PTR_ERR(pchip->pwmd); } - /* - * FIXME: pwm_apply_args() should be removed when switching to - * the atomic PWM API. - */ - pwm_apply_args(pchip->pwmd); + pwm_init_state(pchip->pwmd, &pchip->pwmd_state); } /* interrupt enable : irq 0 is not allowed */ diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 7c02f87c51c2..d094299c2a48 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -1717,6 +1717,7 @@ static int wled_remove(struct platform_device *pdev) static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, + { .compatible = "qcom,pmi8994-wled", .data = (void *)4 }, { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, diff --git a/drivers/video/backlight/rt4831-backlight.c b/drivers/video/backlight/rt4831-backlight.c new file mode 100644 index 000000000000..42155c7d2db1 --- /dev/null +++ b/drivers/video/backlight/rt4831-backlight.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <dt-bindings/leds/rt4831-backlight.h> +#include <linux/backlight.h> +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +#define RT4831_REG_BLCFG 0x02 +#define RT4831_REG_BLDIML 0x04 +#define RT4831_REG_ENABLE 0x08 + +#define RT4831_BLMAX_BRIGHTNESS 2048 + +#define RT4831_BLOVP_MASK GENMASK(7, 5) +#define RT4831_BLOVP_SHIFT 5 +#define RT4831_BLPWMEN_MASK BIT(0) +#define RT4831_BLEN_MASK BIT(4) +#define RT4831_BLCH_MASK GENMASK(3, 0) +#define RT4831_BLDIML_MASK GENMASK(2, 0) +#define RT4831_BLDIMH_MASK GENMASK(10, 3) +#define RT4831_BLDIMH_SHIFT 3 + +struct rt4831_priv { + struct device *dev; + struct regmap *regmap; + struct backlight_device *bl; +}; + +static int rt4831_bl_update_status(struct backlight_device *bl_dev) +{ + struct rt4831_priv *priv = bl_get_data(bl_dev); + int brightness = backlight_get_brightness(bl_dev); + unsigned int enable = brightness ? RT4831_BLEN_MASK : 0; + u8 v[2]; + int ret; + + if (brightness) { + v[0] = (brightness - 1) & RT4831_BLDIML_MASK; + v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT; + + ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v)); + if (ret) + return ret; + } + + return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable); + +} + +static int rt4831_bl_get_brightness(struct backlight_device *bl_dev) +{ + struct rt4831_priv *priv = bl_get_data(bl_dev); + unsigned int val; + u8 v[2]; + int ret; + + ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val); + if (ret) + return ret; + + if (!(val & RT4831_BLEN_MASK)) + return 0; + + ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v)); + if (ret) + return ret; + + ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1; + + return ret; +} + +static const struct backlight_ops rt4831_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = rt4831_bl_update_status, + .get_brightness = rt4831_bl_get_brightness, +}; + +static int rt4831_parse_backlight_properties(struct rt4831_priv *priv, + struct backlight_properties *bl_props) +{ + struct device *dev = priv->dev; + u8 propval; + u32 brightness; + unsigned int val = 0; + int ret; + + /* common properties */ + ret = device_property_read_u32(dev, "max-brightness", &brightness); + if (ret) + brightness = RT4831_BLMAX_BRIGHTNESS; + + bl_props->max_brightness = min_t(u32, brightness, RT4831_BLMAX_BRIGHTNESS); + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = bl_props->max_brightness; + + bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness); + + /* vendor properties */ + if (device_property_read_bool(dev, "richtek,pwm-enable")) + val = RT4831_BLPWMEN_MASK; + + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val); + if (ret) + return ret; + + ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval); + if (ret) + propval = RT4831_BLOVPLVL_21V; + + propval = min_t(u8, propval, RT4831_BLOVPLVL_29V); + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK, + propval << RT4831_BLOVP_SHIFT); + if (ret) + return ret; + + ret = device_property_read_u8(dev, "richtek,channel-use", &propval); + if (ret) { + dev_err(dev, "richtek,channel-use DT property missing\n"); + return ret; + } + + if (!(propval & RT4831_BLCH_MASK)) { + dev_err(dev, "No channel specified\n"); + return -EINVAL; + } + + return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval); +} + +static int rt4831_bl_probe(struct platform_device *pdev) +{ + struct rt4831_priv *priv; + struct backlight_properties bl_props = { .type = BACKLIGHT_RAW, + .scale = BACKLIGHT_SCALE_LINEAR }; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "Failed to init regmap\n"); + return -ENODEV; + } + + ret = rt4831_parse_backlight_properties(priv, &bl_props); + if (ret) { + dev_err(&pdev->dev, "Failed to parse backlight properties\n"); + return ret; + } + + priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv, + &rt4831_bl_ops, &bl_props); + if (IS_ERR(priv->bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + return PTR_ERR(priv->bl); + } + + backlight_update_status(priv->bl); + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int rt4831_bl_remove(struct platform_device *pdev) +{ + struct rt4831_priv *priv = platform_get_drvdata(pdev); + struct backlight_device *bl_dev = priv->bl; + + bl_dev->props.brightness = 0; + backlight_update_status(priv->bl); + + return 0; +} + +static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = { + { .compatible = "richtek,rt4831-backlight", }, + {} +}; +MODULE_DEVICE_TABLE(of, rt4831_bl_of_match); + +static struct platform_driver rt4831_bl_driver = { + .driver = { + .name = "rt4831-backlight", + .of_match_table = rt4831_bl_of_match, + }, + .probe = rt4831_bl_probe, + .remove = rt4831_bl_remove, +}; +module_platform_driver(rt4831_bl_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_LICENSE("GPL v2"); |