diff options
| -rw-r--r-- | Documentation/devicetree/bindings/pwm/atmel-pwm.txt | 33 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/pwm/pxa-pwm.txt | 30 | ||||
| -rw-r--r-- | drivers/pwm/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/pwm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pwm/core.c | 6 | ||||
| -rw-r--r-- | drivers/pwm/pwm-atmel.c | 395 | ||||
| -rw-r--r-- | drivers/pwm/pwm-ep93xx.c | 4 | ||||
| -rw-r--r-- | drivers/pwm/pwm-jz4740.c | 20 | ||||
| -rw-r--r-- | drivers/pwm/pwm-pxa.c | 55 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tiecap.c | 1 | ||||
| -rw-r--r-- | drivers/pwm/pwm-tiehrpwm.c | 4 | ||||
| -rw-r--r-- | drivers/pwm/sysfs.c | 12 | ||||
| -rw-r--r-- | drivers/video/backlight/pwm_bl.c | 1 |
13 files changed, 537 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt new file mode 100644 index 000000000000..02331b904d4e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt @@ -0,0 +1,33 @@ +Atmel PWM controller + +Required properties: + - compatible: should be one of: + - "atmel,at91sam9rl-pwm" + - "atmel,sama5d3-pwm" + - reg: physical base address and length of the controller's registers + - #pwm-cells: Should be 3. See pwm.txt in this directory for a + description of the cells format. + +Example: + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x400>; + #pwm-cells = <3>; + }; + + pwmleds { + compatible = "pwm-leds"; + + d1 { + label = "d1"; + pwms = <&pwm0 3 5000 0> + max-brightness = <255>; + }; + + d2 { + label = "d2"; + pwms = <&pwm0 1 5000 1> + max-brightness = <255>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt new file mode 100644 index 000000000000..5ae9f1e3c338 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt @@ -0,0 +1,30 @@ +Marvell PWM controller + +Required properties: +- compatible: should be one or more of: + - "marvell,pxa250-pwm" + - "marvell,pxa270-pwm" + - "marvell,pxa168-pwm" + - "marvell,pxa910-pwm" +- reg: Physical base address and length of the registers used by the PWM channel + Note that one device instance must be created for each PWM that is used, so the + length covers only the register window for one PWM output, not that of the + entire PWM controller. Currently length is 0x10 for all supported devices. +- #pwm-cells: Should be 1. This cell is used to specify the period in + nanoseconds. + +Example PWM device node: + +pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; +}; + +Example PWM client node: + +backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 5000000>; + ... +} diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 7acab93d5a47..22f2f2857b82 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -41,6 +41,15 @@ config PWM_AB8500 To compile this driver as a module, choose M here: the module will be called pwm-ab8500. +config PWM_ATMEL + tristate "Atmel PWM support" + depends on ARCH_AT91 + help + Generic PWM framework driver for Atmel SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel. + config PWM_ATMEL_TCB tristate "Atmel TC Block PWM support" depends on ATMEL_TCLIB && OF @@ -122,7 +131,8 @@ config PWM_MXS config PWM_PCA9685 tristate "NXP PCA9685 PWM driver" - depends on OF && REGMAP_I2C + depends on OF && I2C + select REGMAP_I2C help Generic PWM framework driver for NXP PCA9685 LED controller. @@ -149,7 +159,7 @@ config PWM_PXA config PWM_RENESAS_TPU tristate "Renesas TPU PWM support" - depends on ARCH_SHMOBILE + depends on ARCH_SHMOBILE || COMPILE_TEST help This driver exposes the Timer Pulse Unit (TPU) PWM controller found in Renesas chips through the PWM API. diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 4abf337dcd02..d8906ec69976 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_SYSFS) += sysfs.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o +obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 2ca95042a0b9..a80471399c20 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -808,12 +808,12 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s) seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label); if (test_bit(PWMF_REQUESTED, &pwm->flags)) - seq_printf(s, " requested"); + seq_puts(s, " requested"); if (test_bit(PWMF_ENABLED, &pwm->flags)) - seq_printf(s, " enabled"); + seq_puts(s, " enabled"); - seq_printf(s, "\n"); + seq_puts(s, "\n"); } } diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c new file mode 100644 index 000000000000..bf4144a14661 --- /dev/null +++ b/drivers/pwm/pwm-atmel.c @@ -0,0 +1,395 @@ +/* + * Driver for Atmel Pulse Width Modulation Controller + * + * Copyright (C) 2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * Licensed under GPLv2. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +/* The following is global registers for PWM controller */ +#define PWM_ENA 0x04 +#define PWM_DIS 0x08 +#define PWM_SR 0x0C +/* Bit field in SR */ +#define PWM_SR_ALL_CH_ON 0x0F + +/* The following register is PWM channel related registers */ +#define PWM_CH_REG_OFFSET 0x200 +#define PWM_CH_REG_SIZE 0x20 + +#define PWM_CMR 0x0 +/* Bit field in CMR */ +#define PWM_CMR_CPOL (1 << 9) +#define PWM_CMR_UPD_CDTY (1 << 10) + +/* The following registers for PWM v1 */ +#define PWMV1_CDTY 0x04 +#define PWMV1_CPRD 0x08 +#define PWMV1_CUPD 0x10 + +/* The following registers for PWM v2 */ +#define PWMV2_CDTY 0x04 +#define PWMV2_CDTYUPD 0x08 +#define PWMV2_CPRD 0x0C +#define PWMV2_CPRDUPD 0x10 + +/* + * Max value for duty and period + * + * Although the duty and period register is 32 bit, + * however only the LSB 16 bits are significant. + */ +#define PWM_MAX_DTY 0xFFFF +#define PWM_MAX_PRD 0xFFFF +#define PRD_MAX_PRES 10 + +struct atmel_pwm_chip { + struct pwm_chip chip; + struct clk *clk; + void __iomem *base; + + void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd); +}; + +static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct atmel_pwm_chip, chip); +} + +static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip, + unsigned long offset) +{ + return readl_relaxed(chip->base + offset); +} + +static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip, + unsigned long offset, unsigned long val) +{ + writel_relaxed(val, chip->base + offset); +} + +static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip, + unsigned int ch, unsigned long offset) +{ + unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; + + return readl_relaxed(chip->base + base + offset); +} + +static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip, + unsigned int ch, unsigned long offset, + unsigned long val) +{ + unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; + + writel_relaxed(val, chip->base + base + offset); +} + +static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + unsigned long clk_rate, prd, dty; + unsigned long long div; + unsigned int pres = 0; + int ret; + + if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) { + dev_err(chip->dev, "cannot change PWM period while enabled\n"); + return -EBUSY; + } + + clk_rate = clk_get_rate(atmel_pwm->clk); + div = clk_rate; + + /* Calculate the period cycles */ + while (div > PWM_MAX_PRD) { + div = clk_rate / (1 << pres); + div = div * period_ns; + /* 1/Hz = 100000000 ns */ + do_div(div, 1000000000); + + if (pres++ > PRD_MAX_PRES) { + dev_err(chip->dev, "pres exceeds the maximum value\n"); + return -EINVAL; + } + } + + /* Calculate the duty cycles */ + prd = div; + div *= duty_ns; + do_div(div, period_ns); + dty = div; + + ret = clk_enable(atmel_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, pres); + atmel_pwm->config(chip, pwm, dty, prd); + + clk_disable(atmel_pwm->clk); + return ret; +} + +static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + unsigned int val; + + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + /* + * If the PWM channel is enabled, using the update register, + * it needs to set bit 10 of CMR to 0 + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty); + + val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); + val &= ~PWM_CMR_UPD_CDTY; + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); + } else { + /* + * If the PWM channel is disabled, write value to duty and + * period registers directly. + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty); + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd); + } +} + +static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + /* + * If the PWM channel is enabled, using the duty update register + * to update the value. + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty); + } else { + /* + * If the PWM channel is disabled, write value to duty and + * period registers directly. + */ + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty); + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd); + } +} + +static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + u32 val; + int ret; + + val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); + + if (polarity == PWM_POLARITY_NORMAL) + val &= ~PWM_CMR_CPOL; + else + val |= PWM_CMR_CPOL; + + ret = clk_enable(atmel_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); + + clk_disable(atmel_pwm->clk); + + return 0; +} + +static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + int ret; + + ret = clk_enable(atmel_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + + atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm); + + return 0; +} + +static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); + + atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); + + clk_disable(atmel_pwm->clk); +} + +static const struct pwm_ops atmel_pwm_ops = { + .config = atmel_pwm_config, + .set_polarity = atmel_pwm_set_polarity, + .enable = atmel_pwm_enable, + .disable = atmel_pwm_disable, + .owner = THIS_MODULE, +}; + +struct atmel_pwm_data { + void (*config)(struct pwm_chip *chip, struct pwm_device *pwm, + unsigned long dty, unsigned long prd); +}; + +static const struct atmel_pwm_data atmel_pwm_data_v1 = { + .config = atmel_pwm_config_v1, +}; + +static const struct atmel_pwm_data atmel_pwm_data_v2 = { + .config = atmel_pwm_config_v2, +}; + +static const struct platform_device_id atmel_pwm_devtypes[] = { + { + .name = "at91sam9rl-pwm", + .driver_data = (kernel_ulong_t)&atmel_pwm_data_v1, + }, { + .name = "sama5d3-pwm", + .driver_data = (kernel_ulong_t)&atmel_pwm_data_v2, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes); + +static const struct of_device_id atmel_pwm_dt_ids[] = { + { + .compatible = "atmel,at91sam9rl-pwm", + .data = &atmel_pwm_data_v1, + }, { + .compatible = "atmel,sama5d3-pwm", + .data = &atmel_pwm_data_v2, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids); + +static inline const struct atmel_pwm_data * +atmel_pwm_get_driver_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + + match = of_match_device(atmel_pwm_dt_ids, &pdev->dev); + if (!match) + return NULL; + + return match->data; + } else { + const struct platform_device_id *id; + + id = platform_get_device_id(pdev); + + return (struct atmel_pwm_data *)id->driver_data; + } +} + +static int atmel_pwm_probe(struct platform_device *pdev) +{ + const struct atmel_pwm_data *data; + struct atmel_pwm_chip *atmel_pwm; + struct resource *res; + int ret; + + data = atmel_pwm_get_driver_data(pdev); + if (!data) + return -ENODEV; + + atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL); + if (!atmel_pwm) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(atmel_pwm->base)) + return PTR_ERR(atmel_pwm->base); + + atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(atmel_pwm->clk)) + return PTR_ERR(atmel_pwm->clk); + + ret = clk_prepare(atmel_pwm->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare PWM clock\n"); + return ret; + } + + atmel_pwm->chip.dev = &pdev->dev; + atmel_pwm->chip.ops = &atmel_pwm_ops; + + if (pdev->dev.of_node) { + atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags; + atmel_pwm->chip.of_pwm_n_cells = 3; + } + + atmel_pwm->chip.base = -1; + atmel_pwm->chip.npwm = 4; + atmel_pwm->config = data->config; + + ret = pwmchip_add(&atmel_pwm->chip); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); + goto unprepare_clk; + } + + platform_set_drvdata(pdev, atmel_pwm); + + return ret; + +unprepare_clk: + clk_unprepare(atmel_pwm->clk); + return ret; +} + +static int atmel_pwm_remove(struct platform_device *pdev) +{ + struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev); + + clk_unprepare(atmel_pwm->clk); + + return pwmchip_remove(&atmel_pwm->chip); +} + +static struct platform_driver atmel_pwm_driver = { + .driver = { + .name = "atmel-pwm", + .of_match_table = of_match_ptr(atmel_pwm_dt_ids), + }, + .id_table = atmel_pwm_devtypes, + .probe = atmel_pwm_probe, + .remove = atmel_pwm_remove, +}; +module_platform_driver(atmel_pwm_driver); + +MODULE_ALIAS("platform:atmel-pwm"); +MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); +MODULE_DESCRIPTION("Atmel PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c index 33aa4461e1ce..e593e9c45c51 100644 --- a/drivers/pwm/pwm-ep93xx.c +++ b/drivers/pwm/pwm-ep93xx.c @@ -224,7 +224,7 @@ static struct platform_driver ep93xx_pwm_driver = { module_platform_driver(ep93xx_pwm_driver); MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver"); -MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, " - "H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>"); +MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); MODULE_ALIAS("platform:ep93xx-pwm"); MODULE_LICENSE("GPL"); diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c index 0a2ede3c3932..9c46209e1d02 100644 --- a/drivers/pwm/pwm-jz4740.c +++ b/drivers/pwm/pwm-jz4740.c @@ -165,13 +165,12 @@ static const struct pwm_ops jz4740_pwm_ops = { static int jz4740_pwm_probe(struct platform_device *pdev) { struct jz4740_pwm_chip *jz4740; - int ret; jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL); if (!jz4740) return -ENOMEM; - jz4740->clk = clk_get(NULL, "ext"); + jz4740->clk = devm_clk_get(&pdev->dev, "ext"); if (IS_ERR(jz4740->clk)) return PTR_ERR(jz4740->clk); @@ -180,29 +179,16 @@ static int jz4740_pwm_probe(struct platform_device *pdev) jz4740->chip.npwm = NUM_PWM; jz4740->chip.base = -1; - ret = pwmchip_add(&jz4740->chip); - if (ret < 0) { - clk_put(jz4740->clk); - return ret; - } - platform_set_drvdata(pdev, jz4740); - return 0; + return pwmchip_add(&jz4740->chip); } static int jz4740_pwm_remove(struct platform_device *pdev) { struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev); - int ret; - - ret = pwmchip_remove(&jz4740->chip); - if (ret < 0) - return ret; - clk_put(jz4740->clk); - - return 0; + return pwmchip_remove(&jz4740->chip); } static struct platform_driver jz4740_pwm_driver = { diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c index a4d2164aaf55..8d995731cef8 100644 --- a/drivers/pwm/pwm-pxa.c +++ b/drivers/pwm/pwm-pxa.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * 2008-02-13 initial version - * eric miao <eric.miao@marvell.com> + * eric miao <eric.miao@marvell.com> */ #include <linux/module.h> @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/pwm.h> +#include <linux/of_device.h> #include <asm/div64.h> @@ -124,6 +125,46 @@ static struct pwm_ops pxa_pwm_ops = { .owner = THIS_MODULE, }; +#ifdef CONFIG_OF +/* + * Device tree users must create one device instance for each pwm channel. + * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver + * code that this is a single channel pxa25x-pwm. Currently all devices are + * supported identically. + */ +static struct of_device_id pwm_of_match[] = { + { .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]}, + { .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]}, + { .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]}, + { .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]}, + { } +}; +MODULE_DEVICE_TABLE(of, pwm_of_match); +#else +#define pwm_of_match NULL +#endif + +static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev) +{ + const struct of_device_id *id = of_match_device(pwm_of_match, dev); + + return id ? id->data : NULL; +} + +static struct pwm_device * +pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args) +{ + struct pwm_device *pwm; + + pwm = pwm_request_from_chip(pc, 0, NULL); + if (IS_ERR(pwm)) + return pwm; + + pwm_set_period(pwm, args->args[0]); + + return pwm; +} + static int pwm_probe(struct platform_device *pdev) { const struct platform_device_id *id = platform_get_device_id(pdev); @@ -131,6 +172,12 @@ static int pwm_probe(struct platform_device *pdev) struct resource *r; int ret = 0; + if (IS_ENABLED(CONFIG_OF) && id == NULL) + id = pxa_pwm_get_id_dt(&pdev->dev); + + if (id == NULL) + return -EINVAL; + pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); if (pwm == NULL) { dev_err(&pdev->dev, "failed to allocate memory\n"); @@ -146,6 +193,11 @@ static int pwm_probe(struct platform_device *pdev) pwm->chip.base = -1; pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1; + if (IS_ENABLED(CONFIG_OF)) { + pwm->chip.of_xlate = pxa_pwm_of_xlate; + pwm->chip.of_pwm_n_cells = 1; + } + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(pwm->mmio_base)) @@ -176,6 +228,7 @@ static struct platform_driver pwm_driver = { .driver = { .name = "pxa25x-pwm", .owner = THIS_MODULE, + .of_match_table = pwm_of_match, }, .probe = pwm_probe, .remove = pwm_remove, diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 4e5c3d13d4f8..032092c7a6ae 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -279,7 +279,6 @@ static int ecap_pwm_remove(struct platform_device *pdev) pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ); pm_runtime_put_sync(&pdev->dev); - pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return pwmchip_remove(&pc->chip); } diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index a4d8f519d965..aee4471424d1 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -360,8 +360,8 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) /* Enable TBCLK before enabling PWM device */ ret = clk_enable(pc->tbclk); if (ret) { - pr_err("Failed to enable TBCLK for %s\n", - dev_name(pc->chip.dev)); + dev_err(chip->dev, "Failed to enable TBCLK for %s\n", + dev_name(pc->chip.dev)); return ret; } diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c index 8c20332d4825..4bd0c639e16d 100644 --- a/drivers/pwm/sysfs.c +++ b/drivers/pwm/sysfs.c @@ -169,15 +169,7 @@ static struct attribute *pwm_attrs[] = { &dev_attr_polarity.attr, NULL }; - -static const struct attribute_group pwm_attr_group = { - .attrs = pwm_attrs, -}; - -static const struct attribute_group *pwm_attr_groups[] = { - &pwm_attr_group, - NULL, -}; +ATTRIBUTE_GROUPS(pwm); static void pwm_export_release(struct device *child) { @@ -205,7 +197,7 @@ static int pwm_export_child(struct device *parent, struct pwm_device *pwm) export->child.release = pwm_export_release; export->child.parent = parent; export->child.devt = MKDEV(0, 0); - export->child.groups = pwm_attr_groups; + export->child.groups = pwm_groups; dev_set_name(&export->child, "pwm%u", pwm->hwpwm); ret = device_register(&export->child); diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index fb80d68f4d33..b75201ff46f6 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -241,7 +241,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL); if (!pb) { - dev_err(&pdev->dev, "no memory for state\n"); ret = -ENOMEM; goto err_alloc; } |