diff options
-rw-r--r-- | Documentation/devicetree/bindings/net/macb.txt | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/cadence/macb.c | 33 | ||||
-rw-r--r-- | drivers/net/ethernet/cadence/macb.h | 1 |
3 files changed, 23 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 38c8e845ac5d..5c397ca14cfe 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP available on sama5d3 SoCs. + Use "cdns,np4-macb" for NP4 SoC devices. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index eb1397484eef..c56347536f6b 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2113,7 +2113,8 @@ static void macb_get_regs(struct net_device *dev, struct ethtool_regs *regs, regs_buff[10] = macb_tx_dma(&bp->queues[0], tail); regs_buff[11] = macb_tx_dma(&bp->queues[0], head); - regs_buff[12] = macb_or_gem_readl(bp, USRIO); + if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) + regs_buff[12] = macb_or_gem_readl(bp, USRIO); if (macb_is_gem(bp)) { regs_buff[13] = gem_readl(bp, DMACFG); } @@ -2392,19 +2393,21 @@ static int macb_init(struct platform_device *pdev) dev->hw_features &= ~NETIF_F_SG; dev->features = dev->hw_features; - val = 0; - if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII) - val = GEM_BIT(RGMII); - else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII && - (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII)) - val = MACB_BIT(RMII); - else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII)) - val = MACB_BIT(MII); + if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) { + val = 0; + if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII) + val = GEM_BIT(RGMII); + else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII && + (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII)) + val = MACB_BIT(RMII); + else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII)) + val = MACB_BIT(MII); - if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN) - val |= MACB_BIT(CLKEN); + if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN) + val |= MACB_BIT(CLKEN); - macb_or_gem_writel(bp, USRIO, val); + macb_or_gem_writel(bp, USRIO, val); + } /* Set MII management clock divider */ val = macb_mdc_clk_div(bp); @@ -2767,6 +2770,11 @@ static const struct macb_config emac_config = { .init = at91ether_init, }; +static const struct macb_config np4_config = { + .caps = MACB_CAPS_USRIO_DISABLED, + .clk_init = macb_clk_init, + .init = macb_init, +}; static const struct macb_config zynqmp_config = { .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO, @@ -2787,6 +2795,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,at32ap7000-macb" }, { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, { .compatible = "cdns,macb" }, + { .compatible = "cdns,np4-macb", .data = &np4_config }, { .compatible = "cdns,pc302-gem", .data = &pc302gem_config }, { .compatible = "cdns,gem", .data = &pc302gem_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 5c03e811224d..0d4ecfcd60b7 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -400,6 +400,7 @@ #define MACB_CAPS_USRIO_HAS_CLKEN 0x00000002 #define MACB_CAPS_USRIO_DEFAULT_IS_MII 0x00000004 #define MACB_CAPS_NO_GIGABIT_HALF 0x00000008 +#define MACB_CAPS_USRIO_DISABLED 0x00000010 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 |