diff options
| -rw-r--r-- | drivers/mmc/core/mmc.c | 11 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 21 |
2 files changed, 17 insertions, 15 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 5844f29d3bed..f1a451e48538 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -213,7 +213,7 @@ static void mmc_select_card_type(struct mmc_card *card) avail_type |= EXT_CSD_CARD_TYPE_HS_52; } - if (caps & MMC_CAP_1_8V_DDR && + if (caps & (MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR) && card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; @@ -1120,11 +1120,14 @@ static int mmc_select_hs_ddr(struct mmc_card *card) * * WARNING: eMMC rules are NOT the same as SD DDR */ - err = -EINVAL; - if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + if (!err) + return 0; + } - if (err && (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V)) + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V && + host->caps & MMC_CAP_1_8V_DDR) err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); /* make sure vccq is 3.3v after switching disaster */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 97699d55b2ae..83f1c4a9f03b 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -259,17 +259,16 @@ struct mmc_host { #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ #define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ -#define MMC_CAP_1_8V_DDR (1 << 11) /* can support */ - /* DDR mode at 1.8V */ -#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ - /* DDR mode at 1.2V */ -#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ -#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) /* CMD14/CMD19 bus width ok */ -#define MMC_CAP_UHS_SDR12 (1 << 15) /* Host supports UHS SDR12 mode */ -#define MMC_CAP_UHS_SDR25 (1 << 16) /* Host supports UHS SDR25 mode */ -#define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */ -#define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */ -#define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */ +#define MMC_CAP_3_3V_DDR (1 << 11) /* Host supports eMMC DDR 3.3V */ +#define MMC_CAP_1_8V_DDR (1 << 12) /* Host supports eMMC DDR 1.8V */ +#define MMC_CAP_1_2V_DDR (1 << 13) /* Host supports eMMC DDR 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 14) /* Can power off after boot */ +#define MMC_CAP_BUS_WIDTH_TEST (1 << 15) /* CMD14/CMD19 bus width ok */ +#define MMC_CAP_UHS_SDR12 (1 << 16) /* Host supports UHS SDR12 mode */ +#define MMC_CAP_UHS_SDR25 (1 << 17) /* Host supports UHS SDR25 mode */ +#define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ +#define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ +#define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ |