summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/dsa/b53/Kconfig7
-rw-r--r--drivers/net/dsa/b53/Makefile1
-rw-r--r--drivers/net/dsa/b53/b53_common.c246
-rw-r--r--drivers/net/dsa/b53/b53_priv.h36
-rw-r--r--drivers/net/dsa/b53/b53_serdes.c217
-rw-r--r--drivers/net/dsa/b53/b53_serdes.h121
-rw-r--r--drivers/net/dsa/b53/b53_srab.c206
7 files changed, 805 insertions, 29 deletions
diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig
index 37745f4bf4f6..e83ebfafd881 100644
--- a/drivers/net/dsa/b53/Kconfig
+++ b/drivers/net/dsa/b53/Kconfig
@@ -35,3 +35,10 @@ config B53_SRAB_DRIVER
help
Select to enable support for memory-mapped Switch Register Access
Bridge Registers (SRAB) like it is found on the BCM53010
+
+config B53_SERDES
+ tristate "B53 SerDes support"
+ depends on B53
+ default ARCH_BCM_NSP
+ help
+ Select to enable support for SerDes on e.g: Northstar Plus SoCs.
diff --git a/drivers/net/dsa/b53/Makefile b/drivers/net/dsa/b53/Makefile
index 4256fb42a4dd..b1be13023ae4 100644
--- a/drivers/net/dsa/b53/Makefile
+++ b/drivers/net/dsa/b53/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o
obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o
obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o
obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o
+obj-$(CONFIG_B53_SERDES) += b53_serdes.o
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index d93c790bfbe8..ea4256cd628b 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/platform_data/b53.h>
#include <linux/phy.h>
+#include <linux/phylink.h>
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <net/dsa.h>
@@ -502,8 +503,14 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
{
struct b53_device *dev = ds->priv;
unsigned int cpu_port = ds->ports[port].cpu_dp->index;
+ int ret = 0;
u16 pvlan;
+ if (dev->ops->irq_enable)
+ ret = dev->ops->irq_enable(dev, port);
+ if (ret)
+ return ret;
+
/* Clear the Rx and Tx disable bits and set to no spanning tree */
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
@@ -536,6 +543,9 @@ void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
+
+ if (dev->ops->irq_disable)
+ dev->ops->irq_disable(dev, port);
}
EXPORT_SYMBOL(b53_disable_port);
@@ -755,6 +765,8 @@ static int b53_reset_switch(struct b53_device *priv)
memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
+ priv->serdes_lane = B53_INVALID_LANE;
+
return b53_switch_reset(priv);
}
@@ -938,33 +950,50 @@ static int b53_setup(struct dsa_switch *ds)
return ret;
}
-static void b53_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
+static void b53_force_link(struct b53_device *dev, int port, int link)
{
- struct b53_device *dev = ds->priv;
- struct ethtool_eee *p = &dev->ports[port].eee;
- u8 rgmii_ctrl = 0, reg = 0, off;
-
- if (!phy_is_pseudo_fixed_link(phydev))
- return;
+ u8 reg, val, off;
/* Override the port settings */
if (port == dev->cpu_port) {
off = B53_PORT_OVERRIDE_CTRL;
- reg = PORT_OVERRIDE_EN;
+ val = PORT_OVERRIDE_EN;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
- reg = GMII_PO_EN;
+ val = GMII_PO_EN;
}
- /* Set the link UP */
- if (phydev->link)
+ b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+ reg |= val;
+ if (link)
reg |= PORT_OVERRIDE_LINK;
+ else
+ reg &= ~PORT_OVERRIDE_LINK;
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
- if (phydev->duplex == DUPLEX_FULL)
+static void b53_force_port_config(struct b53_device *dev, int port,
+ int speed, int duplex, int pause)
+{
+ u8 reg, val, off;
+
+ /* Override the port settings */
+ if (port == dev->cpu_port) {
+ off = B53_PORT_OVERRIDE_CTRL;
+ val = PORT_OVERRIDE_EN;
+ } else {
+ off = B53_GMII_PORT_OVERRIDE_CTRL(port);
+ val = GMII_PO_EN;
+ }
+
+ b53_read8(dev, B53_CTRL_PAGE, off, &reg);
+ reg |= val;
+ if (duplex == DUPLEX_FULL)
reg |= PORT_OVERRIDE_FULL_DUPLEX;
+ else
+ reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
- switch (phydev->speed) {
+ switch (speed) {
case 2000:
reg |= PORT_OVERRIDE_SPEED_2000M;
/* fallthrough */
@@ -978,21 +1007,41 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
reg |= PORT_OVERRIDE_SPEED_10M;
break;
default:
- dev_err(ds->dev, "unknown speed: %d\n", phydev->speed);
+ dev_err(dev->dev, "unknown speed: %d\n", speed);
return;
}
+ if (pause & MLO_PAUSE_RX)
+ reg |= PORT_OVERRIDE_RX_FLOW;
+ if (pause & MLO_PAUSE_TX)
+ reg |= PORT_OVERRIDE_TX_FLOW;
+
+ b53_write8(dev, B53_CTRL_PAGE, off, reg);
+}
+
+static void b53_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+ u8 rgmii_ctrl = 0, reg = 0, off;
+ int pause;
+
+ if (!phy_is_pseudo_fixed_link(phydev))
+ return;
+
/* Enable flow control on BCM5301x's CPU port */
if (is5301x(dev) && port == dev->cpu_port)
- reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW;
+ pause = MLO_PAUSE_TXRX_MASK;
if (phydev->pause) {
if (phydev->asym_pause)
- reg |= PORT_OVERRIDE_TX_FLOW;
- reg |= PORT_OVERRIDE_RX_FLOW;
+ pause |= MLO_PAUSE_TX;
+ pause |= MLO_PAUSE_RX;
}
- b53_write8(dev, B53_CTRL_PAGE, off, reg);
+ b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause);
+ b53_force_link(dev, port, phydev->link);
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
if (port == 8)
@@ -1052,16 +1101,9 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
}
} else if (is5301x(dev)) {
if (port != dev->cpu_port) {
- u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port);
- u8 gmii_po;
-
- b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po);
- gmii_po |= GMII_PO_LINK |
- GMII_PO_RX_FLOW |
- GMII_PO_TX_FLOW |
- GMII_PO_EN |
- GMII_PO_SPEED_2000M;
- b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
+ b53_force_port_config(dev, dev->cpu_port, 2000,
+ DUPLEX_FULL, MLO_PAUSE_TXRX_MASK);
+ b53_force_link(dev, dev->cpu_port, 1);
}
}
@@ -1069,6 +1111,146 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
p->eee_enabled = b53_eee_init(ds, port, phydev);
}
+void b53_port_event(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ bool link;
+ u16 sts;
+
+ b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
+ link = !!(sts & BIT(port));
+ dsa_port_phylink_mac_change(ds, port, link);
+}
+EXPORT_SYMBOL(b53_port_event);
+
+void b53_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ struct b53_device *dev = ds->priv;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ if (dev->ops->serdes_phylink_validate)
+ dev->ops->serdes_phylink_validate(dev, port, mask, state);
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ /* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we
+ * support Gigabit, including Half duplex.
+ */
+ if (state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII &&
+ !phy_interface_mode_is_8023z(state->interface) &&
+ !(is5325(dev) || is5365(dev))) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ if (!phy_interface_mode_is_8023z(state->interface)) {
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+ }
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ phylink_helper_basex_speed(state);
+}
+EXPORT_SYMBOL(b53_phylink_validate);
+
+int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state)
+{
+ struct b53_device *dev = ds->priv;
+ int ret = -EOPNOTSUPP;
+
+ if (phy_interface_mode_is_8023z(state->interface) &&
+ dev->ops->serdes_link_state)
+ ret = dev->ops->serdes_link_state(dev, port, state);
+
+ return ret;
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_state);
+
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_port_config(dev, port, state->speed,
+ state->duplex, state->pause);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(state->interface) &&
+ dev->ops->serdes_config)
+ dev->ops->serdes_config(dev, port, mode, state);
+}
+EXPORT_SYMBOL(b53_phylink_mac_config);
+
+void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (dev->ops->serdes_an_restart)
+ dev->ops->serdes_an_restart(dev, port);
+}
+EXPORT_SYMBOL(b53_phylink_mac_an_restart);
+
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_link(dev, port, false);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(interface) &&
+ dev->ops->serdes_link_set)
+ dev->ops->serdes_link_set(dev, port, mode, interface, false);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_down);
+
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+{
+ struct b53_device *dev = ds->priv;
+
+ if (mode == MLO_AN_PHY)
+ return;
+
+ if (mode == MLO_AN_FIXED) {
+ b53_force_link(dev, port, true);
+ return;
+ }
+
+ if (phy_interface_mode_is_8023z(interface) &&
+ dev->ops->serdes_link_set)
+ dev->ops->serdes_link_set(dev, port, mode, interface, true);
+}
+EXPORT_SYMBOL(b53_phylink_mac_link_up);
+
int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
{
return 0;
@@ -1710,6 +1892,12 @@ static const struct dsa_switch_ops b53_switch_ops = {
.phy_read = b53_phy_read16,
.phy_write = b53_phy_write16,
.adjust_link = b53_adjust_link,
+ .phylink_validate = b53_phylink_validate,
+ .phylink_mac_link_state = b53_phylink_mac_link_state,
+ .phylink_mac_config = b53_phylink_mac_config,
+ .phylink_mac_an_restart = b53_phylink_mac_an_restart,
+ .phylink_mac_link_down = b53_phylink_mac_link_down,
+ .phylink_mac_link_up = b53_phylink_mac_link_up,
.port_enable = b53_enable_port,
.port_disable = b53_disable_port,
.get_mac_eee = b53_get_mac_eee,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index df149756c282..ec796482792d 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -29,6 +29,7 @@
struct b53_device;
struct net_device;
+struct phylink_link_state;
struct b53_io_ops {
int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
@@ -43,8 +44,25 @@ struct b53_io_ops {
int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value);
int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
+ int (*irq_enable)(struct b53_device *dev, int port);
+ void (*irq_disable)(struct b53_device *dev, int port);
+ u8 (*serdes_map_lane)(struct b53_device *dev, int port);
+ int (*serdes_link_state)(struct b53_device *dev, int port,
+ struct phylink_link_state *state);
+ void (*serdes_config)(struct b53_device *dev, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+ void (*serdes_an_restart)(struct b53_device *dev, int port);
+ void (*serdes_link_set)(struct b53_device *dev, int port,
+ unsigned int mode, phy_interface_t interface,
+ bool link_up);
+ void (*serdes_phylink_validate)(struct b53_device *dev, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state);
};
+#define B53_INVALID_LANE 0xff
+
enum {
BCM5325_DEVICE_ID = 0x25,
BCM5365_DEVICE_ID = 0x65,
@@ -107,6 +125,7 @@ struct b53_device {
/* connect specific data */
u8 current_page;
struct device *dev;
+ u8 serdes_lane;
/* Master MDIO bus we got probed from */
struct mii_bus *bus;
@@ -298,6 +317,23 @@ int b53_br_join(struct dsa_switch *ds, int port, struct net_device *bridge);
void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *bridge);
void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state);
void b53_br_fast_age(struct dsa_switch *ds, int port);
+void b53_port_event(struct dsa_switch *ds, int port);
+void b53_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state);
+int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state);
+void b53_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port);
+void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
+void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev);
int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering);
int b53_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan);
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c
new file mode 100644
index 000000000000..b45c55e0b8b4
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+/*
+ * Northstar Plus switch SerDes/SGMII PHY main logic
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <net/dsa.h>
+
+#include "b53_priv.h"
+#include "b53_serdes.h"
+#include "b53_regs.h"
+
+static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block,
+ u16 value)
+{
+ b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+ b53_write16(dev, B53_SERDES_PAGE, offset, value);
+}
+
+static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block)
+{
+ u16 value;
+
+ b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block);
+ b53_read16(dev, B53_SERDES_PAGE, offset, &value);
+
+ return value;
+}
+
+static void b53_serdes_set_lane(struct b53_device *dev, u8 lane)
+{
+ if (dev->serdes_lane == lane)
+ return;
+
+ WARN_ON(lane > 1);
+
+ b53_serdes_write_blk(dev, B53_SERDES_LANE,
+ SERDES_XGXSBLK0_BLOCKADDRESS, lane);
+ dev->serdes_lane = lane;
+}
+
+static void b53_serdes_write(struct b53_device *dev, u8 lane,
+ u8 offset, u16 block, u16 value)
+{
+ b53_serdes_set_lane(dev, lane);
+ b53_serdes_write_blk(dev, offset, block, value);
+}
+
+static u16 b53_serdes_read(struct b53_device *dev, u8 lane,
+ u8 offset, u16 block)
+{
+ b53_serdes_set_lane(dev, lane);
+ return b53_serdes_read_blk(dev, offset, block);
+}
+
+void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+ SERDES_DIGITAL_BLK);
+ if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
+ reg |= FIBER_MODE_1000X;
+ else
+ reg &= ~FIBER_MODE_1000X;
+ b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1),
+ SERDES_DIGITAL_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_config);
+
+void b53_serdes_an_restart(struct b53_device *dev, int port)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ reg |= BMCR_ANRESTART;
+ b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_an_restart);
+
+int b53_serdes_link_state(struct b53_device *dev, int port,
+ struct phylink_link_state *state)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 dig, bmcr, bmsr;
+
+ if (lane == B53_INVALID_LANE)
+ return 1;
+
+ dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS,
+ SERDES_DIGITAL_BLK);
+ bmcr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR),
+ SERDES_MII_BLK);
+
+ switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) {
+ case SPEED_STATUS_10:
+ state->speed = SPEED_10;
+ break;
+ case SPEED_STATUS_100:
+ state->speed = SPEED_100;
+ break;
+ case SPEED_STATUS_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ case SPEED_STATUS_2500:
+ state->speed = SPEED_2500;
+ break;
+ }
+
+ state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF;
+ state->an_enabled = !!(bmcr & BMCR_ANENABLE);
+ state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+ state->link = !!(dig & LINK_STATUS);
+ if (dig & PAUSE_RESOLUTION_RX_SIDE)
+ state->pause |= MLO_PAUSE_RX;
+ if (dig & PAUSE_RESOLUTION_TX_SIDE)
+ state->pause |= MLO_PAUSE_TX;
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_serdes_link_state);
+
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+ phy_interface_t interface, bool link_up)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 reg;
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK);
+ if (link_up)
+ reg &= ~BMCR_PDOWN;
+ else
+ reg |= BMCR_PDOWN;
+ b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR),
+ SERDES_MII_BLK, reg);
+}
+EXPORT_SYMBOL(b53_serdes_link_set);
+
+void b53_serdes_phylink_validate(struct b53_device *dev, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+
+ if (lane == B53_INVALID_LANE)
+ return;
+
+ switch (lane) {
+ case 0:
+ phylink_set(supported, 2500baseX_Full);
+ /* fallthrough */
+ case 1:
+ phylink_set(supported, 1000baseX_Full);
+ break;
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL(b53_serdes_phylink_validate);
+
+int b53_serdes_init(struct b53_device *dev, int port)
+{
+ u8 lane = b53_serdes_map_lane(dev, port);
+ u16 id0, msb, lsb;
+
+ if (lane == B53_INVALID_LANE)
+ return -EINVAL;
+
+ id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0);
+ msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1),
+ SERDES_MII_BLK);
+ lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2),
+ SERDES_MII_BLK);
+ if (id0 == 0 || id0 == 0xffff) {
+ dev_err(dev->dev, "SerDes not initialized, check settings\n");
+ return -ENODEV;
+ }
+
+ dev_info(dev->dev,
+ "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n",
+ lane, id0 & SERDES_ID0_MODEL_MASK,
+ (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41,
+ (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK,
+ (u32)msb << 16 | lsb);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_serdes_init);
+
+MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>");
+MODULE_DESCRIPTION("B53 Switch SerDes driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h
new file mode 100644
index 000000000000..e0674aa0167f
--- /dev/null
+++ b/drivers/net/dsa/b53/b53_serdes.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause
+ *
+ * Northstar Plus switch SerDes/SGMII PHY definitions
+ *
+ * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com>
+ */
+
+#include <linux/phy.h>
+#include <linux/types.h>
+
+/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */
+#define B53_SERDES_PAGE 0x16
+#define B53_SERDES_BLKADDR 0x3e
+#define B53_SERDES_LANE 0x3c
+
+#define B53_SERDES_ID0 0x20
+#define SERDES_ID0_MODEL_MASK 0x3f
+#define SERDES_ID0_REV_NUM_SHIFT 11
+#define SERDES_ID0_REV_NUM_MASK 0x7
+#define SERDES_ID0_REV_LETTER_SHIFT 14
+
+#define B53_SERDES_MII_REG(x) (0x20 + (x) * 2)
+#define B53_SERDES_DIGITAL_CONTROL(x) (0x18 + (x) * 2)
+#define B53_SERDES_DIGITAL_STATUS 0x28
+
+/* SERDES_DIGITAL_CONTROL1 */
+#define FIBER_MODE_1000X BIT(0)
+#define TBI_INTERFACE BIT(1)
+#define SIGNAL_DETECT_EN BIT(2)
+#define INVERT_SIGNAL_DETECT BIT(3)
+#define AUTODET_EN BIT(4)
+#define SGMII_MASTER_MODE BIT(5)
+#define DISABLE_DLL_PWRDOWN BIT(6)
+#define CRC_CHECKER_DIS BIT(7)
+#define COMMA_DET_EN BIT(8)
+#define ZERO_COMMA_DET_EN BIT(9)
+#define REMOTE_LOOPBACK BIT(10)
+#define SEL_RX_PKTS_FOR_CNTR BIT(11)
+#define MASTER_MDIO_PHY_SEL BIT(13)
+#define DISABLE_SIGNAL_DETECT_FLT BIT(14)
+
+/* SERDES_DIGITAL_CONTROL2 */
+#define EN_PARALLEL_DET BIT(0)
+#define DIS_FALSE_LINK BIT(1)
+#define FLT_FORCE_LINK BIT(2)
+#define EN_AUTONEG_ERR_TIMER BIT(3)
+#define DIS_REMOTE_FAULT_SENSING BIT(4)
+#define FORCE_XMIT_DATA BIT(5)
+#define AUTONEG_FAST_TIMERS BIT(6)
+#define DIS_CARRIER_EXTEND BIT(7)
+#define DIS_TRRR_GENERATION BIT(8)
+#define BYPASS_PCS_RX BIT(9)
+#define BYPASS_PCS_TX BIT(10)
+#define TEST_CNTR_EN BIT(11)
+#define TX_PACKET_SEQ_TEST BIT(12)
+#define TX_IDLE_JAM_SEQ_TEST BIT(13)
+#define CLR_BER_CNTR BIT(14)
+
+/* SERDES_DIGITAL_CONTROL3 */
+#define TX_FIFO_RST BIT(0)
+#define FIFO_ELAST_TX_RX_SHIFT 1
+#define FIFO_ELAST_TX_RX_5K 0
+#define FIFO_ELAST_TX_RX_10K 1
+#define FIFO_ELAST_TX_RX_13_5K 2
+#define FIFO_ELAST_TX_RX_18_5K 3
+#define BLOCK_TXEN_MODE BIT(9)
+#define JAM_FALSE_CARRIER_MODE BIT(10)
+#define EXT_PHY_CRS_MODE BIT(11)
+#define INVERT_EXT_PHY_CRS BIT(12)
+#define DISABLE_TX_CRS BIT(13)
+
+/* SERDES_DIGITAL_STATUS */
+#define SGMII_MODE BIT(0)
+#define LINK_STATUS BIT(1)
+#define DUPLEX_STATUS BIT(2)
+#define SPEED_STATUS_SHIFT 3
+#define SPEED_STATUS_10 0
+#define SPEED_STATUS_100 1
+#define SPEED_STATUS_1000 2
+#define SPEED_STATUS_2500 3
+#define SPEED_STATUS_MASK SPEED_STATUS_2500
+#define PAUSE_RESOLUTION_TX_SIDE BIT(5)
+#define PAUSE_RESOLUTION_RX_SIDE BIT(6)
+#define LINK_STATUS_CHANGE BIT(7)
+#define EARLY_END_EXT_DET BIT(8)
+#define CARRIER_EXT_ERR_DET BIT(9)
+#define RX_ERR_DET BIT(10)
+#define TX_ERR_DET BIT(11)
+#define CRC_ERR_DET BIT(12)
+#define FALSE_CARRIER_ERR_DET BIT(13)
+#define RXFIFO_ERR_DET BIT(14)
+#define TXFIFO_ERR_DET BIT(15)
+
+/* Block offsets */
+#define SERDES_DIGITAL_BLK 0x8300
+#define SERDES_ID0 0x8310
+#define SERDES_MII_BLK 0xffe0
+#define SERDES_XGXSBLK0_BLOCKADDRESS 0xffd0
+
+struct phylink_link_state;
+
+static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port)
+{
+ if (!dev->ops->serdes_map_lane)
+ return B53_INVALID_LANE;
+
+ return dev->ops->serdes_map_lane(dev, port);
+}
+
+int b53_serdes_get_link(struct b53_device *dev, int port);
+int b53_serdes_link_state(struct b53_device *dev, int port,
+ struct phylink_link_state *state);
+void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode,
+ const struct phylink_link_state *state);
+void b53_serdes_an_restart(struct b53_device *dev, int port);
+void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode,
+ phy_interface_t interface, bool link_up);
+void b53_serdes_phylink_validate(struct b53_device *dev, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state);
+int b53_serdes_init(struct b53_device *dev, int port);
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 91de2ba99ad1..149788697fd6 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -19,11 +19,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/platform_data/b53.h>
#include <linux/of.h>
#include "b53_priv.h"
+#include "b53_serdes.h"
/* command and status register of the SRAB */
#define B53_SRAB_CMDSTAT 0x2c
@@ -47,6 +49,7 @@
/* command and status register of the SRAB */
#define B53_SRAB_CTRLS 0x40
+#define B53_SRAB_CTRLS_HOST_INTR BIT(1)
#define B53_SRAB_CTRLS_RCAREQ BIT(3)
#define B53_SRAB_CTRLS_RCAGNT BIT(4)
#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6)
@@ -60,8 +63,29 @@
#define B53_SRAB_P7_SLEEP_TIMER BIT(11)
#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12)
+/* Port mux configuration registers */
+#define B53_MUX_CONFIG_P5 0x00
+#define MUX_CONFIG_SGMII 0
+#define MUX_CONFIG_MII_LITE 1
+#define MUX_CONFIG_RGMII 2
+#define MUX_CONFIG_GMII 3
+#define MUX_CONFIG_GPHY 4
+#define MUX_CONFIG_INTERNAL 5
+#define MUX_CONFIG_MASK 0x7
+#define B53_MUX_CONFIG_P4 0x04
+
+struct b53_srab_port_priv {
+ int irq;
+ bool irq_enabled;
+ struct b53_device *dev;
+ unsigned int num;
+ phy_interface_t mode;
+};
+
struct b53_srab_priv {
void __iomem *regs;
+ void __iomem *mux_config;
+ struct b53_srab_port_priv port_intrs[B53_N_PORTS];
};
static int b53_srab_request_grant(struct b53_device *dev)
@@ -344,6 +368,72 @@ err:
return ret;
}
+static irqreturn_t b53_srab_port_thread(int irq, void *dev_id)
+{
+ struct b53_srab_port_priv *port = dev_id;
+ struct b53_device *dev = port->dev;
+
+ b53_port_event(dev->ds, port->num);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t b53_srab_port_isr(int irq, void *dev_id)
+{
+ struct b53_srab_port_priv *port = dev_id;
+ struct b53_device *dev = port->dev;
+ struct b53_srab_priv *priv = dev->priv;
+
+ /* Acknowledge the interrupt */
+ writel(BIT(port->num), priv->regs + B53_SRAB_INTR);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static u8 b53_srab_serdes_map_lane(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ if (p->mode != PHY_INTERFACE_MODE_SGMII)
+ return B53_INVALID_LANE;
+
+ switch (port) {
+ case 5:
+ return 0;
+ case 4:
+ return 1;
+ default:
+ return B53_INVALID_LANE;
+ }
+}
+
+static int b53_srab_irq_enable(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+ int ret;
+
+ ret = request_threaded_irq(p->irq, b53_srab_port_isr,
+ b53_srab_port_thread, 0,
+ dev_name(dev->dev), p);
+ if (!ret)
+ p->irq_enabled = true;
+
+ return ret;
+}
+
+static void b53_srab_irq_disable(struct b53_device *dev, int port)
+{
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p = &priv->port_intrs[port];
+
+ if (p->irq_enabled) {
+ free_irq(p->irq, p);
+ p->irq_enabled = false;
+ }
+}
+
static const struct b53_io_ops b53_srab_ops = {
.read8 = b53_srab_read8,
.read16 = b53_srab_read16,
@@ -355,6 +445,16 @@ static const struct b53_io_ops b53_srab_ops = {
.write32 = b53_srab_write32,
.write48 = b53_srab_write48,
.write64 = b53_srab_write64,
+ .irq_enable = b53_srab_irq_enable,
+ .irq_disable = b53_srab_irq_disable,
+#if IS_ENABLED(CONFIG_B53_SERDES)
+ .serdes_map_lane = b53_srab_serdes_map_lane,
+ .serdes_link_state = b53_serdes_link_state,
+ .serdes_config = b53_serdes_config,
+ .serdes_an_restart = b53_serdes_an_restart,
+ .serdes_link_set = b53_serdes_link_set,
+ .serdes_phylink_validate = b53_serdes_phylink_validate,
+#endif
};
static const struct of_device_id b53_srab_of_match[] = {
@@ -379,6 +479,107 @@ static const struct of_device_id b53_srab_of_match[] = {
};
MODULE_DEVICE_TABLE(of, b53_srab_of_match);
+static void b53_srab_intr_set(struct b53_srab_priv *priv, bool set)
+{
+ u32 reg;
+
+ reg = readl(priv->regs + B53_SRAB_CTRLS);
+ if (set)
+ reg |= B53_SRAB_CTRLS_HOST_INTR;
+ else
+ reg &= ~B53_SRAB_CTRLS_HOST_INTR;
+ writel(reg, priv->regs + B53_SRAB_CTRLS);
+}
+
+static void b53_srab_prepare_irq(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *port;
+ unsigned int i;
+ char *name;
+
+ /* Clear all pending interrupts */
+ writel(0xffffffff, priv->regs + B53_SRAB_INTR);
+
+ if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID)
+ return;
+
+ for (i = 0; i < B53_N_PORTS; i++) {
+ port = &priv->port_intrs[i];
+
+ /* There is no port 6 */
+ if (i == 6)
+ continue;
+
+ name = kasprintf(GFP_KERNEL, "link_state_p%d", i);
+ if (!name)
+ return;
+
+ port->num = i;
+ port->dev = dev;
+ port->irq = platform_get_irq_byname(pdev, name);
+ kfree(name);
+ }
+
+ b53_srab_intr_set(priv, true);
+}
+
+static void b53_srab_mux_init(struct platform_device *pdev)
+{
+ struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ struct b53_srab_port_priv *p;
+ struct resource *r;
+ unsigned int port;
+ u32 reg, off = 0;
+ int ret;
+
+ if (dev->pdata && dev->pdata->chip_id != BCM58XX_DEVICE_ID)
+ return;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->mux_config = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(priv->mux_config))
+ return;
+
+ /* Obtain the port mux configuration so we know which lanes
+ * actually map to SerDes lanes
+ */
+ for (port = 5; port > 3; port--, off += 4) {
+ p = &priv->port_intrs[port];
+
+ reg = readl(priv->mux_config + B53_MUX_CONFIG_P5 + off);
+ switch (reg & MUX_CONFIG_MASK) {
+ case MUX_CONFIG_SGMII:
+ p->mode = PHY_INTERFACE_MODE_SGMII;
+ ret = b53_serdes_init(dev, port);
+ if (ret)
+ continue;
+ break;
+ case MUX_CONFIG_MII_LITE:
+ p->mode = PHY_INTERFACE_MODE_MII;
+ break;
+ case MUX_CONFIG_GMII:
+ p->mode = PHY_INTERFACE_MODE_GMII;
+ break;
+ case MUX_CONFIG_RGMII:
+ p->mode = PHY_INTERFACE_MODE_RGMII;
+ break;
+ case MUX_CONFIG_INTERNAL:
+ p->mode = PHY_INTERFACE_MODE_INTERNAL;
+ break;
+ default:
+ p->mode = PHY_INTERFACE_MODE_NA;
+ break;
+ }
+
+ if (p->mode != PHY_INTERFACE_MODE_NA)
+ dev_info(&pdev->dev, "Port %d mode: %s\n",
+ port, phy_modes(p->mode));
+ }
+}
+
static int b53_srab_probe(struct platform_device *pdev)
{
struct b53_platform_data *pdata = pdev->dev.platform_data;
@@ -417,13 +618,18 @@ static int b53_srab_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
+ b53_srab_prepare_irq(pdev);
+ b53_srab_mux_init(pdev);
+
return b53_switch_register(dev);
}
static int b53_srab_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
+ struct b53_srab_priv *priv = dev->priv;
+ b53_srab_intr_set(priv, false);
if (dev)
b53_switch_remove(dev);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 16:13:29 +0000