diff options
-rw-r--r-- | drivers/char/cyclades.c | 49 | ||||
-rw-r--r-- | include/linux/cyclades.h | 180 |
2 files changed, 115 insertions, 114 deletions
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 7f73bff0c81c..29b5375feeba 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -669,7 +669,6 @@ spin_unlock_irqrestore(&cy_card[info->card].card_lock, flags); \ } while (0) -#include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> @@ -845,7 +844,7 @@ MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); static void cy_start(struct tty_struct *); static void set_line_char(struct cyclades_port *); -static int cyz_issue_cmd(struct cyclades_card *, uclong, ucchar, uclong); +static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); #ifdef CONFIG_ISA static unsigned detect_isa_irq(void __iomem *); #endif /* CONFIG_ISA */ @@ -1498,7 +1497,7 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id) static int cyz_fetch_msg(struct cyclades_card *cinfo, - uclong * channel, ucchar * cmd, uclong * param) + __u32 * channel, __u8 * cmd, __u32 * param) { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; @@ -1518,7 +1517,7 @@ cyz_fetch_msg(struct cyclades_card *cinfo, if (loc_doorbell) { *cmd = (char)(0xff & loc_doorbell); *channel = cy_readl(&board_ctrl->fwcmd_channel); - *param = (uclong) cy_readl(&board_ctrl->fwcmd_param); + *param = (__u32) cy_readl(&board_ctrl->fwcmd_param); cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> loc_doorbell, 0xffffffff); return 1; @@ -1528,12 +1527,12 @@ cyz_fetch_msg(struct cyclades_card *cinfo, static int cyz_issue_cmd(struct cyclades_card *cinfo, - uclong channel, ucchar cmd, uclong param) + __u32 channel, __u8 cmd, __u32 param) { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; struct BOARD_CTRL __iomem *board_ctrl; - uclong __iomem *pci_doorbell; + __u32 __iomem *pci_doorbell; int index; firm_id = cinfo->base_addr + ID_ADDRESS; @@ -1574,7 +1573,7 @@ cyz_handle_rx(struct cyclades_port *info, #else char data; #endif - volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; + volatile __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get); rx_put = cy_readl(&buf_ctrl->rx_put); @@ -1670,7 +1669,7 @@ cyz_handle_tx(struct cyclades_port *info, #ifdef BLOCKMOVE int small_count; #endif - volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr; + volatile __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; if (info->xmit_cnt <= 0) /* Nothing to transmit */ return; @@ -1755,10 +1754,10 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) static volatile struct BOARD_CTRL __iomem *board_ctrl; static volatile struct CH_CTRL __iomem *ch_ctrl; static volatile struct BUF_CTRL __iomem *buf_ctrl; - uclong channel; - ucchar cmd; - uclong param; - uclong hw_ver, fw_ver; + __u32 channel; + __u8 cmd; + __u32 param; + __u32 hw_ver, fw_ver; int special_count; int delta_count; @@ -1892,7 +1891,7 @@ static void cyz_rx_restart(unsigned long arg) struct cyclades_port *info = (struct cyclades_port *)arg; int retval; int card = info->card; - uclong channel = (info->line) - (cy_card[card].first_line); + __u32 channel = (info->line) - (cy_card[card].first_line); unsigned long flags; CY_LOCK(info, flags); @@ -2289,7 +2288,7 @@ static void shutdown(struct cyclades_port *info) if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { cy_writel(&ch_ctrl[channel].rs_control, - (uclong)(cy_readl(&ch_ctrl[channel].rs_control)& + (__u32)(cy_readl(&ch_ctrl[channel].rs_control)& ~(C_RS_RTS | C_RS_DTR))); retval = cyz_issue_cmd(&cy_card[info->card], channel, C_CM_IOCTLM, 0L); @@ -3026,7 +3025,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) static volatile struct CH_CTRL *ch_ctrl; static volatile struct BUF_CTRL *buf_ctrl; int char_count; - volatile uclong tx_put, tx_get, tx_bufsize; + volatile __u32 tx_put, tx_get, tx_bufsize; firm_id = cy_card[card].base_addr + ID_ADDRESS; zfw_ctrl = cy_card[card].base_addr + @@ -3055,10 +3054,10 @@ static int cy_chars_in_buffer(struct tty_struct *tty) * ------------------------------------------------------------ */ -static void cyy_baud_calc(struct cyclades_port *info, uclong baud) +static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) { int co, co_val, bpr; - uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : + __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : 25000000); if (baud == 0) { @@ -3348,7 +3347,7 @@ static void set_line_char(struct cyclades_port *info) struct BOARD_CTRL __iomem *board_ctrl; struct CH_CTRL __iomem *ch_ctrl; struct BUF_CTRL __iomem *buf_ctrl; - uclong sw_flow; + __u32 sw_flow; int retval; firm_id = cy_card[card].base_addr + ID_ADDRESS; @@ -4721,7 +4720,7 @@ static int __init cy_detect_isa(void) #endif /* CONFIG_ISA */ } /* cy_detect_isa */ -static void plx_init(void __iomem * addr, uclong initctl) +static void plx_init(void __iomem * addr, __u32 initctl) { /* Reset PLX */ cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000); @@ -4747,14 +4746,14 @@ static int __init cy_detect_pci(void) struct pci_dev *pdev = NULL; unsigned char cyy_rev_id; unsigned char cy_pci_irq = 0; - uclong cy_pci_phys0, cy_pci_phys2; + __u32 cy_pci_phys0, cy_pci_phys2; void __iomem *cy_pci_addr0, *cy_pci_addr2; unsigned short i, j, cy_pci_nchan, plx_ver; unsigned short device_id, dev_index = 0; - uclong mailbox; - uclong ZeIndex = 0; + __u32 mailbox; + __u32 ZeIndex = 0; void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS]; - uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS]; + __u32 Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS]; unsigned char Ze_irq[NR_CARDS]; struct pci_dev *Ze_pdev[NR_CARDS]; @@ -4959,7 +4958,7 @@ static int __init cy_detect_pci(void) cy_pci_irq); mailbox = - (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) + (__u32)cy_readl(&((struct RUNTIME_9060 __iomem *) cy_pci_addr0)->mail_box_0); if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { @@ -5122,7 +5121,7 @@ static int __init cy_detect_pci(void) Ze_pdev[j] = Ze_pdev[j + 1]; } ZeIndex--; - mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) + mailbox = (__u32)cy_readl(&((struct RUNTIME_9060 __iomem *) cy_pci_addr0)->mail_box_0); #ifdef CY_PCI_DEBUG printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n", diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index a6865f0479f7..4c5b4763f5b8 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -67,6 +67,8 @@ #ifndef _LINUX_CYCLADES_H #define _LINUX_CYCLADES_H +#include <linux/types.h> + struct cyclades_monitor { unsigned long int_count; unsigned long char_count; @@ -172,24 +174,24 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ */ struct CUSTOM_REG { - uclong fpga_id; /* FPGA Identification Register */ - uclong fpga_version; /* FPGA Version Number Register */ - uclong cpu_start; /* CPU start Register (write) */ - uclong cpu_stop; /* CPU stop Register (write) */ - uclong misc_reg; /* Miscelaneous Register */ - uclong idt_mode; /* IDT mode Register */ - uclong uart_irq_status; /* UART IRQ status Register */ - uclong clear_timer0_irq; /* Clear timer interrupt Register */ - uclong clear_timer1_irq; /* Clear timer interrupt Register */ - uclong clear_timer2_irq; /* Clear timer interrupt Register */ - uclong test_register; /* Test Register */ - uclong test_count; /* Test Count Register */ - uclong timer_select; /* Timer select register */ - uclong pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - uclong ram_wait_state; /* RAM wait-state Register */ - uclong uart_wait_state; /* UART wait-state Register */ - uclong timer_wait_state; /* timer wait-state Register */ - uclong ack_wait_state; /* ACK wait State Register */ + __u32 fpga_id; /* FPGA Identification Register */ + __u32 fpga_version; /* FPGA Version Number Register */ + __u32 cpu_start; /* CPU start Register (write) */ + __u32 cpu_stop; /* CPU stop Register (write) */ + __u32 misc_reg; /* Miscelaneous Register */ + __u32 idt_mode; /* IDT mode Register */ + __u32 uart_irq_status; /* UART IRQ status Register */ + __u32 clear_timer0_irq; /* Clear timer interrupt Register */ + __u32 clear_timer1_irq; /* Clear timer interrupt Register */ + __u32 clear_timer2_irq; /* Clear timer interrupt Register */ + __u32 test_register; /* Test Register */ + __u32 test_count; /* Test Count Register */ + __u32 timer_select; /* Timer select register */ + __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ + __u32 ram_wait_state; /* RAM wait-state Register */ + __u32 uart_wait_state; /* UART wait-state Register */ + __u32 timer_wait_state; /* timer wait-state Register */ + __u32 ack_wait_state; /* ACK wait State Register */ }; /* @@ -199,34 +201,34 @@ struct CUSTOM_REG { */ struct RUNTIME_9060 { - uclong loc_addr_range; /* 00h - Local Address Range */ - uclong loc_addr_base; /* 04h - Local Address Base */ - uclong loc_arbitr; /* 08h - Local Arbitration */ - uclong endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - uclong loc_rom_range; /* 10h - Local ROM Range */ - uclong loc_rom_base; /* 14h - Local ROM Base */ - uclong loc_bus_descr; /* 18h - Local Bus descriptor */ - uclong loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - uclong loc_base_mst; /* 20h - Local Base for Master PCI */ - uclong loc_range_io; /* 24h - Local Range for Master IO */ - uclong pci_base_mst; /* 28h - PCI Base for Master PCI */ - uclong pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - uclong filler1; /* 30h */ - uclong filler2; /* 34h */ - uclong filler3; /* 38h */ - uclong filler4; /* 3Ch */ - uclong mail_box_0; /* 40h - Mail Box 0 */ - uclong mail_box_1; /* 44h - Mail Box 1 */ - uclong mail_box_2; /* 48h - Mail Box 2 */ - uclong mail_box_3; /* 4Ch - Mail Box 3 */ - uclong filler5; /* 50h */ - uclong filler6; /* 54h */ - uclong filler7; /* 58h */ - uclong filler8; /* 5Ch */ - uclong pci_doorbell; /* 60h - PCI to Local Doorbell */ - uclong loc_doorbell; /* 64h - Local to PCI Doorbell */ - uclong intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - uclong init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ + __u32 loc_addr_range; /* 00h - Local Address Range */ + __u32 loc_addr_base; /* 04h - Local Address Base */ + __u32 loc_arbitr; /* 08h - Local Arbitration */ + __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ + __u32 loc_rom_range; /* 10h - Local ROM Range */ + __u32 loc_rom_base; /* 14h - Local ROM Base */ + __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ + __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ + __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ + __u32 loc_range_io; /* 24h - Local Range for Master IO */ + __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ + __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ + __u32 filler1; /* 30h */ + __u32 filler2; /* 34h */ + __u32 filler3; /* 38h */ + __u32 filler4; /* 3Ch */ + __u32 mail_box_0; /* 40h - Mail Box 0 */ + __u32 mail_box_1; /* 44h - Mail Box 1 */ + __u32 mail_box_2; /* 48h - Mail Box 2 */ + __u32 mail_box_3; /* 4Ch - Mail Box 3 */ + __u32 filler5; /* 50h */ + __u32 filler6; /* 54h */ + __u32 filler7; /* 58h */ + __u32 filler8; /* 5Ch */ + __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ + __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ + __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ + __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ }; /* Values for the Local Base Address re-map register */ @@ -268,8 +270,8 @@ struct RUNTIME_9060 { #define ZF_TINACT ZF_TINACT_DEF struct FIRM_ID { - uclong signature; /* ZFIRM/U signature */ - uclong zfwctrl_addr; /* pointer to ZFW_CTRL structure */ + __u32 signature; /* ZFIRM/U signature */ + __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ }; /* Op. System id */ @@ -406,24 +408,24 @@ struct FIRM_ID { */ struct CH_CTRL { - uclong op_mode; /* operation mode */ - uclong intr_enable; /* interrupt masking */ - uclong sw_flow; /* SW flow control */ - uclong flow_status; /* output flow status */ - uclong comm_baud; /* baud rate - numerically specified */ - uclong comm_parity; /* parity */ - uclong comm_data_l; /* data length/stop */ - uclong comm_flags; /* other flags */ - uclong hw_flow; /* HW flow control */ - uclong rs_control; /* RS-232 outputs */ - uclong rs_status; /* RS-232 inputs */ - uclong flow_xon; /* xon char */ - uclong flow_xoff; /* xoff char */ - uclong hw_overflow; /* hw overflow counter */ - uclong sw_overflow; /* sw overflow counter */ - uclong comm_error; /* frame/parity error counter */ - uclong ichar; - uclong filler[7]; + __u32 op_mode; /* operation mode */ + __u32 intr_enable; /* interrupt masking */ + __u32 sw_flow; /* SW flow control */ + __u32 flow_status; /* output flow status */ + __u32 comm_baud; /* baud rate - numerically specified */ + __u32 comm_parity; /* parity */ + __u32 comm_data_l; /* data length/stop */ + __u32 comm_flags; /* other flags */ + __u32 hw_flow; /* HW flow control */ + __u32 rs_control; /* RS-232 outputs */ + __u32 rs_status; /* RS-232 inputs */ + __u32 flow_xon; /* xon char */ + __u32 flow_xoff; /* xoff char */ + __u32 hw_overflow; /* hw overflow counter */ + __u32 sw_overflow; /* sw overflow counter */ + __u32 comm_error; /* frame/parity error counter */ + __u32 ichar; + __u32 filler[7]; }; @@ -433,18 +435,18 @@ struct CH_CTRL { */ struct BUF_CTRL { - uclong flag_dma; /* buffers are in Host memory */ - uclong tx_bufaddr; /* address of the tx buffer */ - uclong tx_bufsize; /* tx buffer size */ - uclong tx_threshold; /* tx low water mark */ - uclong tx_get; /* tail index tx buf */ - uclong tx_put; /* head index tx buf */ - uclong rx_bufaddr; /* address of the rx buffer */ - uclong rx_bufsize; /* rx buffer size */ - uclong rx_threshold; /* rx high water mark */ - uclong rx_get; /* tail index rx buf */ - uclong rx_put; /* head index rx buf */ - uclong filler[5]; /* filler to align structures */ + __u32 flag_dma; /* buffers are in Host memory */ + __u32 tx_bufaddr; /* address of the tx buffer */ + __u32 tx_bufsize; /* tx buffer size */ + __u32 tx_threshold; /* tx low water mark */ + __u32 tx_get; /* tail index tx buf */ + __u32 tx_put; /* head index tx buf */ + __u32 rx_bufaddr; /* address of the rx buffer */ + __u32 rx_bufsize; /* rx buffer size */ + __u32 rx_threshold; /* rx high water mark */ + __u32 rx_get; /* tail index rx buf */ + __u32 rx_put; /* head index rx buf */ + __u32 filler[5]; /* filler to align structures */ }; /* @@ -455,27 +457,27 @@ struct BUF_CTRL { struct BOARD_CTRL { /* static info provided by the on-board CPU */ - uclong n_channel; /* number of channels */ - uclong fw_version; /* firmware version */ + __u32 n_channel; /* number of channels */ + __u32 fw_version; /* firmware version */ /* static info provided by the driver */ - uclong op_system; /* op_system id */ - uclong dr_version; /* driver version */ + __u32 op_system; /* op_system id */ + __u32 dr_version; /* driver version */ /* board control area */ - uclong inactivity; /* inactivity control */ + __u32 inactivity; /* inactivity control */ /* host to FW commands */ - uclong hcmd_channel; /* channel number */ - uclong hcmd_param; /* pointer to parameters */ + __u32 hcmd_channel; /* channel number */ + __u32 hcmd_param; /* pointer to parameters */ /* FW to Host commands */ - uclong fwcmd_channel; /* channel number */ - uclong fwcmd_param; /* pointer to parameters */ - uclong zf_int_queue_addr; /* offset for INT_QUEUE structure */ + __u32 fwcmd_channel; /* channel number */ + __u32 fwcmd_param; /* pointer to parameters */ + __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ /* filler so the structures are aligned */ - uclong filler[6]; + __u32 filler[6]; }; /* Host Interrupt Queue */ |