diff options
| -rw-r--r-- | drivers/staging/rtl8192e/r8192E_core.c | 236 | ||||
| -rw-r--r-- | drivers/staging/rtl8192e/r8192E_dm.c | 171 | ||||
| -rw-r--r-- | drivers/staging/rtl8192e/r8192E_wx.c | 45 | ||||
| -rw-r--r-- | drivers/staging/rtl8192e/r819xE_cmdpkt.c | 16 | ||||
| -rw-r--r-- | drivers/staging/rtl8192e/r819xE_firmware.c | 219 |
5 files changed, 2 insertions, 685 deletions
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index aded8fa81d0a..e9d0a69359a6 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -115,10 +115,6 @@ static struct pci_device_id rtl8192_pci_id_tbl[] __devinitdata = { }; static char* ifname = "wlan%d"; -#if 0 -static int hwseqnum = 0; -static int hwwep = 0; -#endif static int hwwep = 1; //default use hw. set 0 to use software security static int channels = 0x3fff; @@ -130,19 +126,6 @@ MODULE_DEVICE_TABLE(pci, rtl8192_pci_id_tbl); //MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); MODULE_DESCRIPTION("Linux driver for Realtek RTL819x WiFi cards"); -#if 0 -MODULE_PARM(ifname,"s"); -MODULE_PARM_DESC(devname," Net interface name, wlan%d=default"); - -MODULE_PARM(hwseqnum,"i"); -MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default"); - -MODULE_PARM(hwwep,"i"); -MODULE_PARM_DESC(hwwep," Try to use hardware WEP support. Still broken and not available on all cards"); - -MODULE_PARM(channels,"i"); -MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI"); -#endif #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 9) module_param(ifname, charp, S_IRUGO|S_IWUSR ); @@ -515,99 +498,6 @@ static int proc_get_registers(char *page, char **start, } -#if 0 -static int proc_get_cck_reg(char *page, char **start, - off_t offset, int count, - int *eof, void *data) -{ - struct net_device *dev = data; -// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - - int len = 0; - int i,n; - - int max = 0x5F; - - /* This dump the current register page */ - for(n=0;n<=max;) - { - //printk( "\nD: %2x> ", n); - len += snprintf(page + len, count - len, - "\nD: %2x > ",n); - - for(i=0;i<16 && n<=max;i++,n++) - len += snprintf(page + len, count - len, - "%2x ",read_phy_cck(dev,n)); - - // printk("%2x ",read_nic_byte(dev,n)); - } - len += snprintf(page + len, count - len,"\n"); - - - *eof = 1; - return len; -} - -#endif - -#if 0 -static int proc_get_ofdm_reg(char *page, char **start, - off_t offset, int count, - int *eof, void *data) -{ - - struct net_device *dev = data; -// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - - int len = 0; - int i,n; - - //int max=0xff; - int max = 0x40; - - /* This dump the current register page */ - for(n=0;n<=max;) - { - //printk( "\nD: %2x> ", n); - len += snprintf(page + len, count - len, - "\nD: %2x > ",n); - - for(i=0;i<16 && n<=max;i++,n++) - len += snprintf(page + len, count - len, - "%2x ",read_phy_ofdm(dev,n)); - - // printk("%2x ",read_nic_byte(dev,n)); - } - len += snprintf(page + len, count - len,"\n"); - - - - *eof = 1; - return len; -} - -#endif - -#if 0 -static int proc_get_stats_hw(char *page, char **start, - off_t offset, int count, - int *eof, void *data) -{ - struct net_device *dev = data; - struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - - int len = 0; - - len += snprintf(page + len, count - len, - "NIC int: %lu\n" - "Total int: %lu\n", - priv->stats.ints, - priv->stats.shints); - - *eof = 1; - return len; -} -#endif static int proc_get_stats_tx(char *page, char **start, off_t offset, int count, @@ -770,16 +660,6 @@ static void rtl8192_proc_init_one(struct net_device *dev) dev->name); return; } - #if 0 - e = create_proc_read_entry("stats-hw", S_IFREG | S_IRUGO, - priv->dir_dev, proc_get_stats_hw, dev); - - if (!e) { - DMESGE("Unable to initialize " - "/proc/net/rtl8192/%s/stats-hw\n", - dev->name); - } - #endif e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO, priv->dir_dev, proc_get_stats_rx, dev); @@ -798,17 +678,6 @@ static void rtl8192_proc_init_one(struct net_device *dev) "/proc/net/rtl8192/%s/stats-tx\n", dev->name); } - #if 0 - e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO, - priv->dir_dev, proc_get_stats_ieee, dev); - - if (!e) { - DMESGE("Unable to initialize " - "/proc/net/rtl8192/%s/stats-ieee\n", - dev->name); - } - - #endif e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO, priv->dir_dev, proc_get_stats_ap, dev); @@ -826,23 +695,6 @@ static void rtl8192_proc_init_one(struct net_device *dev) "/proc/net/rtl8192/%s/registers\n", dev->name); } -#if 0 - e = create_proc_read_entry("cck-registers", S_IFREG | S_IRUGO, - priv->dir_dev, proc_get_cck_reg, dev); - if (!e) { - RT_TRACE(COMP_ERR, "Unable to initialize " - "/proc/net/rtl8192/%s/cck-registers\n", - dev->name); - } - - e = create_proc_read_entry("ofdm-registers", S_IFREG | S_IRUGO, - priv->dir_dev, proc_get_ofdm_reg, dev); - if (!e) { - RT_TRACE(COMP_ERR, "Unable to initialize " - "/proc/net/rtl8192/%s/ofdm-registers\n", - dev->name); - } -#endif } /**************************************************************************** -----------------------------MISC STUFF------------------------- @@ -1002,19 +854,6 @@ void rtl8192_tx_enable(struct net_device *dev) ieee80211_reset_queue(priv->ieee80211); } -#if 0 -void rtl8192_beacon_tx_enable(struct net_device *dev) -{ - struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - u32 reg; - - reg = read_nic_dword(priv->ieee80211->dev,INTA_MASK); - - /* enable Beacon realted interrupt signal */ - reg |= (IMR_BcnInt | IMR_BcnInt | IMR_TBDOK | IMR_TBDER); - write_nic_byte(dev,reg); -} -#endif static void rtl8192_free_rx_ring(struct net_device *dev) { @@ -1111,20 +950,6 @@ inline u16 rtl8192_rate2rate(short rate) -#if 0 -void rtl8192_tx_queues_stop(struct net_device *dev) -{ - //struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - u8 dma_poll_mask = (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT); - dma_poll_mask |= (1<<TX_DMA_STOP_HIPRIORITY_SHIFT); - dma_poll_mask |= (1<<TX_DMA_STOP_NORMPRIORITY_SHIFT); - dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT); - - rtl8192_set_mode(dev,EPROM_CMD_CONFIG); - write_nic_byte(dev,TX_DMA_POLLING,dma_poll_mask); - rtl8192_set_mode(dev,EPROM_CMD_NORMAL); -} -#endif static void rtl8192_data_hard_stop(struct net_device *dev) { @@ -2378,13 +2203,6 @@ short rtl8192_is_tx_queue_empty(struct net_device *dev) } return 1; } -#if 0 -void rtl8192_rq_tx_ack(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - priv->ieee80211->ack_tx_to_ieee = 1; -} -#endif static void rtl8192_hw_sleep_down(struct net_device *dev) { RT_TRACE(COMP_POWER, "%s()============>come to sleep down\n", __FUNCTION__); @@ -2857,13 +2675,6 @@ static void rtl8192_read_eeprom_info(struct net_device* dev) // when auto load failed, the last address byte set to be a random one. // added by david woo.2007/11/7 memcpy(dev->dev_addr, bMac_Tmp_Addr, 6); - #if 0 - for(i = 0; i < 6; i++) - { - Adapter->PermanentAddress[i] = sMacAddr[i]; - PlatformEFIOWrite1Byte(Adapter, IDR0+i, sMacAddr[i]); - } - #endif } RT_TRACE(COMP_INIT, "Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n", @@ -3883,23 +3694,6 @@ void rtl8192_prepare_beacon(struct r8192_priv *priv) //spin_unlock_irqrestore (&priv->tx_lock, flags); } -#if 0 -void rtl8192_beacon_tx_enable(struct net_device *dev) -{ - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - - rtl8180_set_mode(dev,EPROM_CMD_CONFIG); -#ifdef CONFIG_RTL8185B - priv->dma_poll_stop_mask &= ~(TPPOLLSTOP_BQ);MgntQuery_MgntFrameTxRateMgntQuery_MgntFrameTxRate - write_nic_byte(dev,TPPollStop, priv->dma_poll_mask); -#else - priv->dma_poll_mask &=~(1<<TX_DMA_STOP_BEACON_SHIFT); - write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask); -#endif - rtl8180_set_mode(dev,EPROM_CMD_NORMAL); -} -#endif - /* this configures registers for beacon tx and enables it via * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might @@ -3955,14 +3749,6 @@ void rtl8192_start_beacon(struct net_device *dev) /*************************************************************************** -------------------------------NET STUFF--------------------------- ***************************************************************************/ -#if 0 -static struct net_device_stats *rtl8192_stats(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - return &priv->ieee80211->stats; -} -#endif @@ -4064,13 +3850,6 @@ TxCheckStuck(struct net_device *dev) continue; } txring->nStuckCount++; - #if 0 - if(txring->nStuckCount > ResetThreshold) - { - RT_TRACE( COMP_RESET, "<== TxCheckStuck()\n" ); - return RESET_TYPE_NORMAL; - } - #endif bCheckFwTxCnt = TRUE; } } @@ -4144,12 +3923,6 @@ static bool HalRxCheckStuck8190Pci(struct net_device *dev) //DbgPrint("RSSI <= %d, check this time \n", VeryLowRSSI); } } -#if 0 - if (rx_chk_cnt < 2) - return bStuck; - else - rx_chk_cnt = 0; -#endif if(priv->RxCounter==RegRxCounter) bStuck = TRUE; @@ -4506,10 +4279,6 @@ void InactivePsWorkItemCallback(struct net_device *dev) // // To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. // -#if 0 - if(pPSC->eInactivePowerState == eRfOn) - CamRestoreAllEntry(dev); -#endif pPSC->bSwRfProcessing = FALSE; RT_TRACE(COMP_POWER, "InactivePsWorkItemCallback() <--------- \n"); } @@ -4868,11 +4637,6 @@ void rtl8192_commit(struct net_device *dev) _rtl8192_up(dev); } -/* -void rtl8192_restart(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); -*/ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) void rtl8192_restart(struct work_struct *work) { diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c index 939e4b74a903..e3d5aa3f8cb7 100644 --- a/drivers/staging/rtl8192e/r8192E_dm.c +++ b/drivers/staging/rtl8192e/r8192E_dm.c @@ -95,9 +95,6 @@ extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work); extern void dm_rf_pathcheck_workitemcallback(struct net_device *dev); #endif extern void dm_fsync_timer_callback(unsigned long data); -#if 0 -extern bool dm_check_lbus_status(struct net_device *dev); -#endif extern void dm_check_fsync(struct net_device *dev); extern void dm_shadow_init(struct net_device *dev); extern void dm_initialize_txpower_tracking(struct net_device *dev); @@ -946,33 +943,6 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) return; } - //========================== - // this is only for test, should be masked -#if 0 -{ - //UINT32 eRFPath; - //UINT32 start_rf, end_rf; - UINT32 curr_addr; - //UINT32 reg_addr; - //UINT32 reg_addr_end; - UINT32 reg_value; - //start_rf = RF90_PATH_A; - //end_rf = RF90_PATH_B;//RF90_PATH_MAX; - //reg_addr = 0x0; - //reg_addr_end = 0x2F; - - for (curr_addr = 0; curr_addr < 0x2d; curr_addr++) - { - reg_value = PHY_QueryRFReg( Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A, - curr_addr, bMaskDWord); - } - - pHalData->TXPowercount = 0; - return; -} -#endif - //========================== - // read and filter out unreasonable value tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7] RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA); @@ -1648,19 +1618,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); static u8 TM_Trigger=0; -#if 0 - u1Byte i; - u4Byte tmpRegA; - for(i=0; i<50; i++) - { - tmpRegA = PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7] - PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - //delay_us(100); - PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); - //delay_us(100); - } - DbgPrint("Trigger and readback ThermalMeter, write RF reg0x2 = 0x4d to 0x4f for 50 times\n"); -#else + //DbgPrint("dm_CheckTXPowerTracking() \n"); if(!priv->btxpower_tracking) return; @@ -1699,8 +1657,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) #endif TM_Trigger = 0; } -#endif - } +} #endif static void dm_check_txpower_tracking(struct net_device *dev) @@ -1908,14 +1865,6 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev) //cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]); write_nic_dword(dev, RATR0, ratr_value); write_nic_byte(dev, UFWP, 1); -#if 0 // Disable old code. - u1Byte index; - u4Byte input_value; - index = (u1Byte)((((pu4Byte)(val))[0]) >> 28); - input_value = (((pu4Byte)(val))[0]) & 0x0fffffff; - // TODO: Correct it. Emily 2007.01.11 - PlatformEFIOWrite4Byte(Adapter, RATR0+index*4, input_value); -#endif } //Resore TX Power Tracking Index if(priv->btxpower_trackingInit && priv->btxpower_tracking){ @@ -2895,78 +2844,6 @@ static void dm_ctstoself(struct net_device *dev) } -#if 0 -/*----------------------------------------------------------------------------- - * Function: dm_rf_operation_test_callback() - * - * Overview: Only for RF operation test now. - * - * Input: NONE - * - * Output: NONE - * - * Return: NONE - * - * Revised History: - * When Who Remark - * 05/29/2008 amy Create Version 0 porting from windows code. - * - *---------------------------------------------------------------------------*/ -void dm_rf_operation_test_callback(unsigned long dev) -{ -// struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev); - u8 erfpath; - - - for(erfpath=0; erfpath<4; erfpath++) - { - //DbgPrint("Set RF-%d\n\r", eRFPath); - //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7); - udelay(100); - } - - { - //PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500); - } - - // For test - { - //u8 i; - //PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500); -#if 0 - for(i=0; i<50; i++) - { - // Write Test - PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - //delay_us(100); - PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); - //delay_us(100); - PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4d); - //delay_us(100); - PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4f); - //delay_us(100); - -#if 0 - // Read test - PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits); - //delay_us(100); - PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits); - //delay_us(100); - PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits); - //delay_us(100); - PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits); - //delay_us(100); - PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits); - //delay_us(100); - PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits); - //delay_us(100); -#endif - } -#endif - } - -} /* DM_RfOperationTestCallBack */ -#endif /*----------------------------------------------------------------------------- * Function: dm_check_rfctrl_gpio() @@ -3889,50 +3766,6 @@ void dm_check_fsync(struct net_device *dev) } } -#if 0 -/*----------------------------------------------------------------------------- - * Function: DM_CheckLBusStatus() - * - * Overview: For 9x series, we must make sure LBUS is active for IO. - * - * Input: NONE - * - * Output: NONE - * - * Return: NONE - * - * Revised History: - * When Who Remark - * 02/22/2008 MHC Create Version 0. - * - *---------------------------------------------------------------------------*/ -extern s1Byte DM_CheckLBusStatus(IN PADAPTER Adapter) -{ - PMGNT_INFO pMgntInfo=&Adapter->MgntInfo; - -#if (HAL_CODE_BASE & RTL819X) - -#if (HAL_CODE_BASE == RTL8192) - -#if( DEV_BUS_TYPE==PCI_INTERFACE) - //return (pMgntInfo->bLbusEnable); // For debug only - return TRUE; -#endif - -#if( DEV_BUS_TYPE==USB_INTERFACE) - return TRUE; -#endif - -#endif // #if (HAL_CODE_BASE == RTL8192) - -#if (HAL_CODE_BASE == RTL8190) - return TRUE; -#endif // #if (HAL_CODE_BASE == RTL8190) - -#endif // #if (HAL_CODE_BASE & RTL819X) -} /* DM_CheckLBusStatus */ - -#endif /*----------------------------------------------------------------------------- * Function: dm_shadow_init() diff --git a/drivers/staging/rtl8192e/r8192E_wx.c b/drivers/staging/rtl8192e/r8192E_wx.c index 2b87edacfc46..88ad00db056e 100644 --- a/drivers/staging/rtl8192e/r8192E_wx.c +++ b/drivers/staging/rtl8192e/r8192E_wx.c @@ -43,40 +43,6 @@ static int r8192_wx_get_freq(struct net_device *dev, } -#if 0 - -static int r8192_wx_set_beaconinterval(struct net_device *dev, struct iw_request_info *aa, - union iwreq_data *wrqu, char *b) -{ - int *parms = (int *)b; - int bi = parms[0]; - - struct r8192_priv *priv = ieee80211_priv(dev); - - down(&priv->wx_sem); - DMESG("setting beacon interval to %x",bi); - - priv->ieee80211->beacon_interval=bi; - rtl8180_commit(dev); - up(&priv->wx_sem); - - return 0; -} - - -static int r8192_wx_set_forceassociate(struct net_device *dev, struct iw_request_info *aa, - union iwreq_data *wrqu, char *extra) -{ - struct r8192_priv *priv=ieee80211_priv(dev); - int *parms = (int *)extra; - - priv->ieee80211->force_associate = (parms[0] > 0); - - - return 0; -} - -#endif static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info *a, union iwreq_data *wrqu, char *b) { @@ -1037,17 +1003,6 @@ exit: } #if (WIRELESS_EXT >= 18) -#if 0 -static int r8192_wx_get_enc_ext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - int ret = 0; - ret = ieee80211_wx_get_encode_ext(priv->ieee80211, info, wrqu, extra); - return ret; -} -#endif static int r8192_wx_set_enc_ext(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) diff --git a/drivers/staging/rtl8192e/r819xE_cmdpkt.c b/drivers/staging/rtl8192e/r819xE_cmdpkt.c index 8602a55c6048..d6b7d2f39e3e 100644 --- a/drivers/staging/rtl8192e/r819xE_cmdpkt.c +++ b/drivers/staging/rtl8192e/r819xE_cmdpkt.c @@ -148,22 +148,6 @@ RT_STATUS cmpk_message_handle_tx( code_virtual_address += frag_length; frag_offset += frag_length; -#if 0 - { - int k; - printk("------------tx cmd------------\n"); - for(k = 0; k<i; k++) - printk(" 0x%x",((u8*)buf)[k]); - printk("\n"); - } - { - int m; - printk("-------------cmd desc----------\n"); - for(m=0;m<32;m++) - printk(" 0x%x",((u8*)pdesc)[m]); - printk("\n"); - } -#endif }while(frag_offset < buffer_len); Failed: diff --git a/drivers/staging/rtl8192e/r819xE_firmware.c b/drivers/staging/rtl8192e/r819xE_firmware.c index c42b83e51e45..98fbd0c50281 100644 --- a/drivers/staging/rtl8192e/r819xE_firmware.c +++ b/drivers/staging/rtl8192e/r819xE_firmware.c @@ -98,13 +98,6 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u }while(frag_offset < buffer_len); return rt_status; - -#if 0 -cmdsend_downloadcode_fail: - rt_status = false; - RT_TRACE(COMP_ERR, "CmdSendDownloadCode fail !!\n"); - return rt_status; -#endif } //----------------------------------------------------------------------------- @@ -406,215 +399,3 @@ download_firmware_fail: return rt_status; } - -#if 0 -/* - * Procedure: (1) Transform firmware code from little endian to big endian if required. - * (2) Number of bytes in Firmware downloading should be multiple - * of 4 bytes. If length is not multiple of 4 bytes, appending of zeros is required - * - */ -void CmdAppendZeroAndEndianTransform( - u1Byte *pDst, - u1Byte *pSrc, - u2Byte *pLength) -{ - - u2Byte ulAppendBytes = 0, i; - u2Byte ulLength = *pLength; - -//test only - //memset(pDst, 0xcc, 12); - - - /* Transform from little endian to big endian */ -//#if DEV_BUS_TYPE==PCI_INTERFACE -#if 0 - for( i=0 ; i<(*pLength) ; i+=4) - { - if((i+3) < (*pLength)) pDst[i+0] = pSrc[i+3]; - if((i+2) < (*pLength)) pDst[i+1] = pSrc[i+2]; - if((i+1) < (*pLength)) pDst[i+2] = pSrc[i+1]; - if((i+0) < (*pLength)) pDst[i+3] = pSrc[i+0]; - } -#else - pDst += USB_HWDESC_HEADER_LEN; - ulLength -= USB_HWDESC_HEADER_LEN; - - for( i=0 ; i<ulLength ; i+=4) { - if((i+3) < ulLength) pDst[i+0] = pSrc[i+3]; - if((i+2) < ulLength) pDst[i+1] = pSrc[i+2]; - if((i+1) < ulLength) pDst[i+2] = pSrc[i+1]; - if((i+0) < ulLength) pDst[i+3] = pSrc[i+0]; - - } -#endif - - //1(2) Append Zero - if( ((*pLength) % 4) >0) - { - ulAppendBytes = 4-((*pLength) % 4); - - for(i=0 ; i<ulAppendBytes; i++) - pDst[ 4*((*pLength)/4) + i ] = 0x0; - - *pLength += ulAppendBytes; - } -} -#endif - -#if 0 -RT_STATUS -CmdSendPacket( - PADAPTER Adapter, - PRT_TCB pTcb, - PRT_TX_LOCAL_BUFFER pBuf, - u4Byte BufferLen, - u4Byte PacketType, - BOOLEAN bLastInitPacket - ) -{ - s2Byte i; - u1Byte QueueID; - u2Byte firstDesc,curDesc = 0; - u2Byte FragIndex=0, FragBufferIndex=0; - - RT_STATUS rtStatus = RT_STATUS_SUCCESS; - - CmdInitTCB(Adapter, pTcb, pBuf, BufferLen); - - - if(CmdCheckFragment(Adapter, pTcb, pBuf)) - CmdFragmentTCB(Adapter, pTcb); - else - pTcb->FragLength[0] = (u2Byte)pTcb->BufferList[0].Length; - - QueueID=pTcb->SpecifiedQueueID; -#if DEV_BUS_TYPE!=USB_INTERFACE - firstDesc=curDesc=Adapter->NextTxDescToFill[QueueID]; -#endif - -#if DEV_BUS_TYPE!=USB_INTERFACE - if(VacancyTxDescNum(Adapter, QueueID) > pTcb->BufferCount) -#else - if(PlatformIsTxQueueAvailable(Adapter, QueueID, pTcb->BufferCount) && - RTIsListEmpty(&Adapter->TcbWaitQueue[QueueID])) -#endif - { - pTcb->nDescUsed=0; - - for(i=0 ; i<pTcb->BufferCount ; i++) - { - Adapter->HalFunc.TxFillCmdDescHandler( - Adapter, - pTcb, - QueueID, //QueueIndex - curDesc, //index - FragBufferIndex==0, //bFirstSeg - FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1), //bLastSeg - pTcb->BufferList[i].VirtualAddress, //VirtualAddress - pTcb->BufferList[i].PhysicalAddressLow, //PhyAddressLow - pTcb->BufferList[i].Length, //BufferLen - i!=0, //bSetOwnBit - (i==(pTcb->BufferCount-1)) && bLastInitPacket, //bLastInitPacket - PacketType, //DescPacketType - pTcb->FragLength[FragIndex] //PktLen - ); - - if(FragBufferIndex==(pTcb->FragBufCount[FragIndex]-1)) - { // Last segment of the fragment. - pTcb->nFragSent++; - } - - FragBufferIndex++; - if(FragBufferIndex==pTcb->FragBufCount[FragIndex]) - { - FragIndex++; - FragBufferIndex=0; - } - -#if DEV_BUS_TYPE!=USB_INTERFACE - curDesc=(curDesc+1)%Adapter->NumTxDesc[QueueID]; -#endif - pTcb->nDescUsed++; - } - -#if DEV_BUS_TYPE!=USB_INTERFACE - RTInsertTailList(&Adapter->TcbBusyQueue[QueueID], &pTcb->List); - IncrementTxDescToFill(Adapter, QueueID, pTcb->nDescUsed); - Adapter->HalFunc.SetTxDescOWNHandler(Adapter, QueueID, firstDesc); - // TODO: should call poll use QueueID - Adapter->HalFunc.TxPollingHandler(Adapter, TXCMD_QUEUE); -#endif - } - else -#if DEV_BUS_TYPE!=USB_INTERFACE - goto CmdSendPacket_Fail; -#else - { - pTcb->bLastInitPacket = bLastInitPacket; - RTInsertTailList(&Adapter->TcbWaitQueue[pTcb->SpecifiedQueueID], &pTcb->List); - } -#endif - - return rtStatus; - -#if DEV_BUS_TYPE!=USB_INTERFACE -CmdSendPacket_Fail: - rtStatus = RT_STATUS_FAILURE; - return rtStatus; -#endif - -} -#endif - - - - -#if 0 -RT_STATUS -FWSendNullPacket( - IN PADAPTER Adapter, - IN u4Byte Length -) -{ - RT_STATUS rtStatus = RT_STATUS_SUCCESS; - - - PRT_TCB pTcb; - PRT_TX_LOCAL_BUFFER pBuf; - BOOLEAN bLastInitPacket = FALSE; - - PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK); - -#if DEV_BUS_TYPE==USB_INTERFACE - Length += USB_HWDESC_HEADER_LEN; -#endif - - //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) - if(MgntGetBuffer(Adapter, &pTcb, &pBuf)) - { - PlatformZeroMemory(pBuf->Buffer.VirtualAddress, Length); - rtStatus = CmdSendPacket(Adapter, pTcb, pBuf, Length, DESC_PACKET_TYPE_INIT, bLastInitPacket); //0 : always set LastInitPacket to zero -//#if HAL_CODE_BASE != RTL8190HW -// // TODO: for test only -// ReturnTCB(Adapter, pTcb, RT_STATUS_SUCCESS); -//#endif - if(rtStatus == RT_STATUS_FAILURE) - goto CmdSendNullPacket_Fail; - }else - goto CmdSendNullPacket_Fail; - - PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK); - return rtStatus; - - -CmdSendNullPacket_Fail: - PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK); - rtStatus = RT_STATUS_FAILURE; - RT_ASSERT(rtStatus == RT_STATUS_SUCCESS, ("CmdSendDownloadCode fail !!\n")); - return rtStatus; -} -#endif - - |